Aims

Anchorage of pedicle screw rod instrumentation in the elderly spine with poor bone quality remains challenging. Our study aims to evaluate how the screw bone anchorage is affected by screw design, bone quality, loading conditions, and cementing techniques.

Purpose of the study. To incorporate magnetic resonance (MR) image data in a finite element (FE) model to estimate intervertebral disc stress as a function of posture. Background. Determining the stresses on the intervertebral discs is important for understanding disc degeneration and developing treatment strategies. The effect of different postures on disc stress has previously been investigated through disc pressure measurements and through computational modelling. Kinematic data derived from MR images and used in an FE model may provide a non-invasive way of assessing a wide range of subjects and postures. Methods. Two-dimensional FE models of the lumbar spine were created for four subjects. Vertebral bodies were modelled as rigid bodies, the disc was modelled with an isotropic elastic annulus (E = 2.5 MPa, ν=0.4) and nucleus (E = 1 MPa, ν=0.45). The geometry was defined from MR image data obtained in the supine posture; vertebral body translation and rotation were determined from images acquired in standing and sitting. Results. The principle stress distribution in standing and sitting differed between subjects. Stress peaks occurred in different discs (L4L5 v L5S1) and in different regions of the annulus (anterior v posterior). In three subjects the compressive stress at L4L5 was largest in sitting, for the fourth subject it was largest in standing; shear stress at L4L5 was highest in sitting for all four subjects. Conclusion. Kinematic data from MR images provides a way of assessing the effect of postural change on disc stress; inter-subject differences in L4L5 compressive stress are consistent with disc pressure measurements

School of Mechanical Engineering, University of Birmingham, Birmingham, UK. This study investigated the effects on friction of changing the dimensions of a ball-and-socket Total Disc Arthroplasty (TDA). A generic ball-and-socket model was designed and manufactured based on the dimensions and geometry of a metal-on-metal Maverick (Medtronic, Minneapolis, USA) device. Keeping the radial clearance similar to the Maverick, the ball and socket dimensions varied between 10 to 16 mm and 10.015 to 16.015 mm, respectively, in order to enable the comparison between different dimensions. The implants were made out of Cobalt Chrome Molybdenum alloy, with a surface roughness of 0.05 μm. A Bose spine simulator (Bose Corporation, ElectroForce Systems Group, Minnesota, USA) was used to apply an axial compressive force to the TDA. Axial rotation of ±2° was then applied at various frequencies and the resulting frictional torque measured. The tests were performed under an axial load of 50, 600 and 1200 N and frequencies of 0.5, 1.0, 1.5 and 2.0 Hz, for four different samples of radii 10, 12, 14 and 16 mm (48 combinations in total). The results showed variation of frictional torque in different frequencies for all four samples under constant axial load. It was observed that the frictional torque had the lowest value for the implant with ball radius of 16mm. It might be concluded that the implant with larger ball radius may create less friction and hence offer a longer life

Introduction. Morphological parameters are used to describe curve characters in AIS like curve location, curve magnitude, stiffness etc. Like all other morphological metrics the accuracy is more when digital imaging, archiving and extraction of features is used rather than manual measurements. The content Based Image Retrieval system is anew software that allows rapid, accurate documentation of AIS images and their retrieval by visual content. Classification systems and their shortcomings. Traditional classifications only looked at curve location (Ponsetti/Friedman); this was enhanced to add curve flexibility (to include or exclude secondary curves in fusion) (PUMC, King/Moe etc). Newer classifications like the Lenke have added sagittal profile into the decision making equation. From 5 basic curve types the subtypes have increased to 42 potential curve patterns by the addition of one parameter!! In future as we understand the 3-D geometry of these curves better we may want to add more measureable items (like degree of rotation) and by adding one term the subtypes would be 128!!! This suggests that we need to have a simple easy to remember way of classifying or eliminate classifications altogether. Experimental evidence. Several experiments were conducted with the new CBIR software which showed that similar images of scoliosis cases could be retrieved without resorting to a classification scheme. Even surgical planning can be made by downloading all similar cases operated before. The variability can be set to any level of precision desired. Significance. In future we may eliminate classifications to decide on curve types and for surgical planning and recall from a large multicentre database similar curves and their surgical plan

Aim. To evaluate the effect of corrective surgery for adolescent idiopathic scoliosis on pelvic morphology. Introduction. Pelvic incidence increases linearly with age during childhood and adolescence before stabilising in adulthood. Most scoliosis surgery occurs before adulthood. We tested the hypothesis that during growth, scoliosis surgery alters the normal linear relationship between pelvic incidence and age. Methods. One hundred patients with 200 radiographs who had undergone surgery for scoliosis were identified. Thirty-eight patients were excluded due to other diagnoses. All patients had posterior surgery for adolescent idiopathic scoliosis. Pre and post-operative lateral radiographs taken at 6 weeks were assessed. Spino-pelvic indices measured were Pelvic Incidence (PI), Sacral Slope (SS), Pelvic Tilt (PT) and the C7 plumb line. Results. There were 62 patients: 58 females and 4 males. Median age was 14 (range 12-17). Median pelvic parameters pre-operatively were 49, 39 and11 degrees for PI, SS and PT respectively. Post operative median values were 48, 36 and14 degrees for PI, SS and PT. Statistical analysis showed no significant differences in pelvic incidence, pelvic tilt or the C7 plumbline between pre- and post-operative values. There was a significant decrease in sacral slope from a median of 39 degrees pre-operatively to 36 degrees post operatively (p=0.007). There was no statistical difference between these variables when analysed by age or gender, nor were there any correlations between the change in variables. All values fell within the normal ranges for age related spino-pelvic parameters. Conclusion. Corrective surgery for adolescent idiopathic scoliosis does not alter pelvic morphology even in the growing adolescent group. Previous studies have documented the pre and post operative correlation between pelvic geometry and spinal alignment in normal and surgical subjects. This study investigates whether surgery affects pelvic morphology during its developmental stages. This to our knowledge has not been described previously

Objectives

Loss of motion following spine segment fusion results in increased strain in the adjacent motion segments. However, to date, studies on the biomechanics of the cervical spine have not assessed the role of coupled motions in the lumbar spine. Accordingly, we investigated the biomechanics of the cervical spine following cervical fusion and lumbar fusion during simulated whiplash using a whole-human finite element (FE) model to simulate coupled motions of the spine.

We investigated the relationship between spinopelvic parameters and disc degeneration in young adult patients with spondylolytic spondylolisthesis. A total of 229 men with a mean age of 21 years (18 to 26) with spondylolytic spondylolisthesis were identified. All radiological measurements, including pelvic incidence, sacral slope, pelvic tilt, lumbar lordosis, sacral inclination, lumbosacral angle (LSA), and sacrofemoral distance, were calculated from standing lateral lumbosacral radiographs. The degree of intervertebral disc degeneration was classified using a modified Pfirrmann scale. We analysed the spinopelvic parameters according to disc level, degree of slip and disc degeneration.

There were significant positive correlations between the degree of slip and pelvic incidence (p = 0.009), sacral slope (p = 0.003) and lumbar lordosis (p = 0.010). The degree of slip and the LSA were correlated with disc degeneration (p < 0.001 and p = 0.003, respectively). There was also a significant difference between the degree of slip (p < 0.001) and LSA (p = 0.006) according to the segmental level of disc degeneration.

Cite this article: Bone Joint J 2013;95-B:1239–43.

Between January 1990 and December 2000 we carried out 226 SB Charité III disc replacements for lumbar disc degeneration in 160 patients. They were reviewed at a mean follow-up of 79 months (31 to 161) to determine the clinical and radiological outcome. The clinical results were collected by an independent observer, who was not involved in patient selection, treatment or follow-up, using a combination of outcome measures, including the Oswestry Disability Index. Pain was recorded using a visual analogue score, and the most recent radiographs were reviewed.

Survival of the device was analysed by the Kaplan-Meier method and showed a cumulative survival of 35% at 156 months when radiological failure was taken as the endpoint. The mean improvement in the Oswestry disability index scores after disc replacement was 14% (6% to 21%) and the mean improvement in the pain score was 1.6 (0.46 to 2.73), both falling below the clinically significant threshold. Removal of the implant was required in 12 patients, four because of implant failure.

These poor results indicate that further use of this implant is not justified.