We aimed to further evaluate the biomechanical characteristics
of two locking screws Synthetic tubular bone models representing normal bone density
and osteoporotic bone density were used. Artificial fracture gaps
of 1 cm were created in each specimen before fixation with one of
two constructs: 1) two locking screws using a five-hole locking
compression plate (LCP) plate; or 2) three non-locking screws with
a seven-hole LCP plate across each side of the fracture gap. The
stiffness, maximum displacement, mode of failure and number of cycles
to failure were recorded under progressive cyclic torsional and
eccentric axial loading.Objectives
Methods
Aims. Olecranon fractures are usually caused by falling directly on to the olecranon or following a fall on to an outstretched arm. Displaced fractures of the olecranon with a stable ulnohumeral joint are commonly managed by open reduction and internal fixation. The current predominant method of management of simple displaced fractures with ulnohumeral stability (Mayo grade IIA) in the UK and internationally is a low-cost technique using tension band wiring. Suture or suture anchor techniques have been described with the aim of reducing the hardware related complications and reoperation. An all-suture technique has been developed to fix the fracture using strong synthetic sutures alone. The aim of this trial is to investigate the clinical and cost-effectiveness of tension suture repair versus traditional tension band wiring for the surgical fixation of Mayo grade IIA fractures of the olecranon. Methods. SOFFT is a multicentre, pragmatic, two-arm parallel-group, non-inferiority, randomized controlled trial. Participants will be assigned 1:1 to receive either tension suture fixation or tension band wiring. 280 adult participants will be recruited. The primary outcome will be the Disabilities of the Arm, Shoulder and Hand (DASH) score at four months post-randomization. Secondary outcome measures include DASH (at 12, 18, and 24 months), pain, Net Promotor Score (patient satisfaction), EuroQol five-dimension five-level score (EQ-5D-5L), radiological union, complications, elbow range of motion, and re-operations related to the injury or to remove metalwork. An economic evaluation will assess the cost-effectiveness of treatments. Discussion. There is currently no high-quality evidence comparing the clinical and cost effectiveness of the tension suture repair to the traditional tension band wiring currently offered for the internal fixation of displaced fractures of the olecranon. The Simple Olecranon
Majority of osteoporosis related fractures are treated surgically using metallic fixation devices. Anchorage of fixation devices is sometimes challenging due to poor osteoporotic bone quality that can lead to failure of the
Abstract. Objectives. Osteoporotic fractures tend to be more challenging than fractures in healthy bone and the efficacy of metal screw fixation decreases with decreasing bone mineral density making it more difficult for such screws to gain purchase. This leads to increased complication rates such as malunion, non-union and implant failure (1). Bioresorbable polymer devices have seen clinical success in
Introduction. Positive reports from implant designer centres on the use of fibular nails in the complex ankle fractures has resulted in a marked increase in their use nationally. Our aim in this study was to report on the outcomes of the use of all fibular nails in two major trauma centres. Methods. All patients who underwent ankle
Introduction:. Inadequate reduction and fixation of ankle fractures leads to poor clinical outcomes although there are no well-established criteria to evaluate the quality of surgical
The objective of this study was to investigate how a new customizable light-curable osteosynthesis method (AdFix) compared to traditional metal hardware when loaded in torsion in an ovine phalanx model. Twenty-one ovine proximal phalanges were given a 3mm transverse osteotomy and four 1.5mm cortex screws were inserted bicortically on either side of the gap. The light-curable polymer composite was then applied using the method developed by Hutchinson [1] to create osteosyntheses in two groups, having either a narrow (6mm, N=9) or a wide (10mm, N=9) fixation patch. A final group (N=3) was fixated with conventional metal plates. The constructs were loaded in torsion at a rate of 6°/second until failure or 45° of rotation was reached. Torque and angular displacement were measured, torsional stiffness was calculated as the slope of the Torque-Displacement curve, and maximum torque was queried for each specimen. The torsional stiffnesses of the narrow, wide, and metal plate constructs were 39.1 ± 6.2, 54.4 ± 6.3, and 16.2 ± 3.0 Nmm/° respectively. All groups were statistically different from each other (p<0.001). The maximum torques of the narrow, wide, and metal plate constructs were 424 ± 72, 600 ± 120, and 579 ± 20 Nmm respectively. The narrow constructs were statistically different from the other two (p<0.05), while the wide and metal constructs were not statistically different from each other (p=0.76). This work demonstrated that the torsional performance of the novel solution is comparable to metal fixators. As a measure of the functional range, the torsional stiffness in the AdhFix exceeded that of the metal plate. Furthermore, the wide patches were able to sustain a similar maximum toque as the metal plates. These results suggest AdhFix to be a viable, customizable alternative to metal implants for
Ankle fractures are among the most common types of fractures. If surgery is not performed within 12 to 24 hours, ankle swelling is likely to develop and delay the operative fixation. This leads to patients staying longer in the ward waiting and increased hospital occupancy. This prolonged stay has significant financial implication as well as it is frustrating for both patients and health care professionals. The aim was to formulate a pathway for the ankle fracture patients coming to the emergency department, outpatients and planned for operative intervention. To identify whether pre-operative hospital admissions of stable ankle fracture patients are reduced with the implementation of the pathway. We formulated an ankle
Introduction. Ankle fractures represent approximately 10% of the fracture workload and are projected to increase due to ageing population. We present our 5 years outcome review post-surgical management of ankle fractures in a large UK Trauma unit. Methods. A total of 111 consecutive patients treated for an unstable ankle fracture were entered into a database and prospectively followed up. Baseline patient characteristics, complications, further intervention including additional surgery, functional status were recorded during five-year follow-up. Pre-injury and post-fixation functional outcome measures at 2-years were assessed using Olerud-Molander Ankle Scores (OMAS) and Lower Extremity Functional Scales (LEFS). A p value < 0.05 was considered significant. Results. The mean age was 46 with a male:female ratio of 1:1.1. The distribution of comorbidities was BMI >30 (25%), diabetes (5%), alcohol consumption >20U/week (15%) and smoking (26%). Higher BMI was predictive of worse post-op LEFS score (p = 0.02). Between pre-injury and post fixation functional scores at 2 years, there was a mean reduction of 26.8 (OMAS) and 20.5(LEFS). Using very strict radiological criteria, 31 (28%) had less than anatomical reduction of fracture fragments intra-operatively. This was, however, not predictive of patients' functional outcome in this cohort. Within 5-year period, 22 (20%) patients had removal of metalwork from their ankle, with majority 13 (59%) requiring syndesmotic screw removal. Further interventions included: joint injection (3), deltoid reconstruction (1), arthroscopic debridement (1), superficial sinus excision (2), and conversion to hindfoot nail due to failure of fixation (1). Reduction in OMAS was predictive of patients' ongoing symptoms (p=0.01). Conclusion. There is a significant reduction in functional outcome after ankle
This study aimed to assess the outcomes of patients with complex rib fractures undergoing operative or non-operative management at our center over a six-year time period. Retrospective analysis was performed to identify all patients with complex rib fractures at our center from May 2016 to September 2022. Outcome measures included mechanical ventilation, tracheostomy, pneumonia, and mortality at one year. 388 patients with complex rib fractures were identified. 37 (10%) patients fulfilled criteria for surgical management and underwent rib
The management of comminuted metaphyseal fractures is a technical challenge and satisfactory outcomes of such fixations often remain elusive. The small articular fragments and bone loss often make it difficult for standard fixation implants for proper fixation. We developed a novel technique to achieve anatomical reduction in multiple cases of comminuted metaphyseal fractures at different sites by employing the cantilever mechanism with the help of multiple thin Kirschner wires augmented by standard fixation implants. We performed a retrospective study of 10 patients with different metaphyseal fractures complicated by comminution and loss of bone stock. All patients were treated with the help of cantilever mechanism using multiple Kirschner wires augmented by compression plates. All the patients were operated by the same surgeon between November 2020 to March 2021 and followed up till March 2023. Surgical outcomes were evaluated according to the clinical and radiological criteria. A total of 10 patients were included in the study. Since we only included patients with highly unstable and comminuted fractures which were difficult to fix with traditional methods, the number of patients in the study were less. All 10 patients showed satisfactory clinical and radiological union at the end of the study with good range of motion. One of the patient in the study had post-operative wound complication which was managed conservatively with regular dressings and oral antibiotics. Comminuted metaphyseal fractures might differ in pattern and presentation with every patient and there can be no standard treatment for all. The cantilever technique of
Helical plates are preferably used for proximal humeral shaft
Is Non-Weight-Bearing Necessary? (INWN) is a pragmatic multicentre randomised controlled trial comparing immediate protected weight-bearing (IWB) with non-weight-bearing cast immobilisation (NWB) following ankle
Rib
Aims. Cephalomedullary nails (CMNs) are commonly used for the treatment of intertrochanteric hip fractures. Total hip arthroplasty (THA) may be used as a salvage procedure when fixation fails in these patients. The aim of this study was to analyze the complications of THA following failed intertrochanteric hip
Classification systems for the reporting of surgical complications have been developed and adapted for many surgical subspecialties. The purpose of this systematic review was to examine the variability and frequency of reporting terms used to describe complications in ankle
Aims. The aim of this study was to evaluate the functional outcome in patients undergoing implant removal (IR) after
Historically rib fractures have been managed conservatively but over recent years evidence has continued to grow in support of fixation in select cases. Rib fractures can affect patients’ ability to adequately ventilate and increase the morbidity and mortality of patients with multiple injuries. There is increasing evidence that rib
Aims. Assessment of bone mineral density (BMD) with dual-energy X-ray absorptiometry (DXA) is a well-established clinical technique, but it is not available in the acute trauma setting. Thus, it cannot provide a preoperative estimation of BMD to help guide the technique of
The aim was to report operative complications, radiographic and patient-reported outcomes following lateral tibial plateau