Nanovesicle-based therapy is increasingly being pursued as a safe, cell-free strategy to combat various immunological, musculoskeletal and neurodegenerative diseases. Small secreted extracellular vesicles (sEVs) obtained from multipotent mesenchymal stromal cells (MSCs) are of particular interest for therapeutic use since they convey anti-inflammatory, anti-scarring and neuroprotective activities to the recipient cells. Cell-derived vesicles (CDVs) produced by a proprietary extrusion process are surrounded by a lipid bilayer membrane with correct membrane topology, display biological activities similar to MSC-derived EVs and may find specific application for organ-targeted drug delivery systems. Translation of nanovesicle-based therapeutics into clinical application requires quantitative and reproducible analysis of bioactivity and stability, and the potential for GMP-compliant manufacturing. Manufacturing and regulatory considerations as well as preclinical models to support clinical translation will be discussed

The efficient delivery of therapeutic molecules to the cartilage of joints is major obstacle in developing useful therapeutic interventions; hence, a targeted drug delivery system for this tissue is critical. We have overcome the challenge by developing a system that employs electrostatic attraction between the negatively charged constituents of cartilage and a positively charged polymer, poly-beta amino esters (PBAEs). We have demonstrated cartilage uptake of dexamethasone (DEX) covalently bound to the PBAE was doubled and retention in tissues prolonged compared to the equivalent dose of the commercial drug formulation. Moreover, no adverse effects on chondrocytes were found. Our data also show [1, 2] that PBAEs can bind not only healthy cartilage tissues but also enzymatically treated cartilage mimicking early stages of OA. Our PBAEs-prodrug technology's advantages are fourfold; the specificity and efficacy of its targeting mechanism for cartilage, the ease of its production and the low-cost nature of the delivery system

Aim. Several local antibiotic-eluting drug delivery systems have been developed to treat bacterial bone infections. However, available systems have significant shortcomings, including suboptimal drug-release profiles with a burst followed by subtherapeutic release, which may lead to treatment failure and selection for drug resistance. Here, we present a novel injectable, biocompatible, in situ-forming depot, termed CarboCells, which can be fine-tuned for the desired antibiotic-release profile. The CarboCell technology has flexible injection properties that allow surgeons to accurately place antibiotic-eluting depots within and surrounding infectious sites in soft tissue and bones. The CarboCell technology is furthermore compatible with clinical image-guided injection technologies. These studies aimed to determine the therapeutic potential of CarboCell formulations for treatment of implant-associated osteomyelitis by mono- and dual antimicrobial therapy. Methods. The solubility and stability of several antibiotics were determined in various CarboCell formulations, and in vitro drug release was characterized. Lead candidates for antimicrobial therapy were selected using a modified semi-solid biofilm model with 4-day-matured Staphylococcus aureus biofilm (osteomyelitis-isolate, strain S54F9). Efficacy was investigated in a rat implant-associated osteomyelitis model established in the femoral bone by intraosseous implantation of a stainless-steel pin with 4-day-old in vitro-matured S. aureus biofilm. CarboCells were injected subcutaneously at the femur, and antimicrobial efficacy was evaluated 7 days post-implantation. Lead formulations were subsequently tested in a well-established translational implant-associated tibial S. aureus osteomyelitis pig model. Infection was established for 7 days before revision surgery consisting of debridement, washing, implantation of a new stainless-steel pin, and injection of antibiotic-releasing CarboCells into the debrided cavity and in the surrounding bone- and soft-tissue. Seven days post-revision, pigs were euthanized, and samples were collected for microbial and histopathological evaluation. Results. Lead antimicrobial agents were soluble in high concentrations and were stable in CarboCell formulations. Three combinations completely eradicated bacteria in the in vitro semi-solid biofilm model. In the rat osteomyelitis model, CarboCell formulations of the lead combinations also eradicated bacteria in bone and implant in several rats and significantly reduced infection in all treated rats. In the pig model, CarboCell antimicrobial monotherapy demonstrated promising therapeutic efficacy, including complete eradication of infection in bone and implants in several pigs and significantly reduced bacterial burden in others. Conclusions. Using the CarboCell technology for antimicrobial delivery exert substantial loco-regional efficacy. The attractive sustained high-dose antibiotic release profile combined with the flexible injection technology allows surgeons to accurately place effective drug-eluting depots in key areas not accessible to competing technologies

A novel injectable hydrogel based on DNA and silicate nanodisks was fabricated and optimized to obtain a suitable drug delivery platform for biomedical applications. Precisely, the hydrogel was designed by combining two different type of networks: a first network (type A) made of interconnections between neighboring DNA strands and a second one (type B) consisting of electrostatic interactions between the silicate nanodisks and the DNA backbone. The silicate nanodisks were introduced to increase the viscosity of the DNA physical hydrogel and improve their shear-thinning properties. Additionally, the silicate nanodisks were selected to modulate the release capability of the designed network. DNA 4% solutions were heated at 90°C for 45 seconds and cooled down at 37°C degree for two hours. In the second step, the silicate nanodisks suspension in water at different concentrations (0.1 up to 0.5%) were then mixed with the pre-gel DNA hydrogels to obtain the nanocomposite hydrogels. Rheological studies were carried out to investigate the shear thinning properties of the hydrogels. Additionally, the hydrogels were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron microscopy. The hydrogels were loaded with the osteoinductive drug dexamethasone and its release was tested in vitro in phosphate buffer pH 7.4. The drug activity upon release was tested evaluating the osteogenic differentiation of human adipose derived stem cells (hASCs) in vitro through analysis of main osteogenic markers and quantification of alkaline phosphatase activity and calcium deposition. Finally, the hydrogels were tested in vivo and injected into cranial defects in rats to assess their biocompatibility and bone regeneration potential. The inclusion of the silicate nanodisks increased the viscosity of the hydrogels and the best results were obtained with the highest concentration of the nanoclay (0.5%). The hydrogels possessed shear-thinning properties as demonstrated by cyclic strain sweep tests and were able to recover their original storage modulus G' upon removal of strain. Such improvement in the injectable properties of the formulated hydrogels was mainly attributed to the formation of electrostatic interactions between the silicate nanodisks and the phosphate groups of the DNA backbone as confirmed by XPS analysis of the O, N, and P spectra. Additionally, laponite was able to sustain the release of the osteoinductive drug dexamethasone which was instead completely released from the DNA-based hydrogels after a week. The drug after being released was still active and promoted the osteogenic differentiation of hASCs as confirmed by ALP expression and expression of main osteogenic markers including ALP and COLA1. Finally, the gels proved to be biocompatible in vivo when injected into cranial defects and promoted bone formation at the periphery of the defect after a month post-treatment. A novel injectable shear-thinning DNA-based hydrogel was characterized and tested for its drug delivery properties. The hydrogel can promote the sustain release of a small molecule like dexamethasone and be biocompatible in vitro and in vivo. Due to these promising findings, the designed system could find also applicability for the delivery of growth factors or other therapeutic molecules

Great strides have been made in the early detection and treatment of cancer which is resulting in improved survivability and more Canadians living with cancer. Approximately 80% of primary breast, lung, and prostate cancers metastasize to the spine. Poly-methyl methacrylate (PMMA) bone cement is one of the most commonly used bone substitutes in spine surgery. In clinical practice it can be loaded with various drugs, such as antibiotics or chemotheraputic drugs, as a means of local drug delivery. However, studies have shown that drugs loaded into PMMA cement tend to release in small bursts in the first 48–72 hours, and the remaining drug is trapped without any significant release over time. The objective of this study is to develop a nanoparticle-functionalized PMMA cement for use as a sustained doxorubicin delivery device. We hypothesize that PMMA cement containing mesoporous silica nanoparticles will release more doxorubicin than regular PMMA. High viscosity SmartSet ™ PMMA cement by DePuy Synthes was used in this study. The experimental group consisted of 3 replicates each containing 0.24 g of mesoporous silica nanoparticles, 1.76 g of cement powder, 1ml of liquid cement monomer and 1 mg of doxorubicin. The control group consisted 3 replicates each containing 2.0 g of cement powder, 1ml of liquid cement monomer and 1 mg of doxorubicin. The experimental group contained an average of 8.18 ± 0.008 % (W/W) mesoporous silica nanoparticles. Each replicate was casted into a cylindrical block and incubated in a PBS solution which was changed at predetermined intervals for 45 days. The concentration of eluted doxorubicin in each solution was measured using a florescent plate reader. The mechanical properties of cement were assessed by unconfined compression testing. The effect of the doxorubicin released from cement on prostate and breast tumor cell metabolic activity was assessed using the Alamar Blue test. After 45 days the experimental group released 3.24 ± 0.25 % of the initially loaded doxorubicin which was more than the 2.12 ± 0.005% released by the control group (p 0.03). There was no statistically significant difference in Young's elasticity modulus between groups (p 0.53). Nanoparticle functionalized PMMA suppressed the metabolic activity of prostate cancer by more than 50 percent but did not reach statistical significance. Nanoparticle functionalized PMMA suppressed the metabolic activity of breast cancer cells by 69 % (p < 0.05). Nanoparticle-functionalized PMMA cement can release up to 1.53 times more doxorubicin than the standard PMMA. The use of mesoporous silica nanoparticles to improve drug release from PMMA cement shows promise. In the future, in vivo experiments are required to test the efficacy of released doxorubicin on tumor cell growth

Nitrogen-containing bisphosphonates such as Zoledronic Acid (ZA) are used clinically for the treatment of skeletal diseases related with increased bone resorption. The gold standard is to administrate the drug through a systemic pathway, however this is often associated with high dosages, risk of side-effects, reduced site-specific drug delivery and hence, limited drug-effectiveness. A controlled local drug delivery, via a biomimetic bone graft, could be beneficial by direct and time-regulated application of significantly lower drug dosage at the site of interest. Thus, higher efficacy and reduced side-effects could be expected. In this experimental in vivo study, we examined the effect of ZA when used together with a Calcium Sulphate/Hydroxyapatite biomaterial in a femoral condyle bone defect in rats and compared local to systemic administration. The following groups were used: group1: empty defect (no biomaterial & no treatment), group2: biomaterial alone, group3: biomaterial + systemic ZA (0.1mg ZA/kg – single subcutaneous injection), group4–6: biomaterial conjugated with ZA at different concentrations, (0.07 to 0.70 mg ZA/mL of paste, corresponding to 0.0024 to 0.024 mg ZA/kg). The animals were sacrificed at 6 weeks and toxicological examination was performed. Bone regeneration was evaluated using qualitative and quantitative micro-CT analysis and Histomorphometry. The results showed a significant difference between the groups, suggesting that ZA has an overall effect on bone healing. The most pronounced effect was seen with the local application of approximately 10 times less ZA-dosage when compared to systemic use (p<0.001). This study demonstrates the importance of local ZA administration in bone regeneration

Background: The healthy endothelium consists of quiescent endothelial cells that, under appropriate stimulation, can undergo profound changes leading to an activated phenotype. Activated endothelial cells of the synovial vasculature play a major role in the inflammatory process occurring in rheumatoid arthritis (RA) and enhanced angiogenesis contributes to the development and maintenance of RA. Thus, the endothelium can be used as an gateway for drug delivery and therapy. Cationic liposomes have been shown to target angiogenic endothelial cells in chronic inflammation in mice, also shown in tumors. They may also serve as potent vehicles for drug delivery to the synovial vasculature of rheumatoid joints. Methods: To test whether cationic liposomes can serve as vehicles for drug delivery in RA we investigated the targeting of fluorescently labelled cationic liposomes (LipoRed) to the activated synovial vasculature of knees from arthritic mice. In a second step we used cationic liposomes carrying the compound MDG-12 (Endo-MDG-12) to study the effects of a targeted delivery of this drug to the inflamed joints in Antigen induced Arthritis (AIA). Targeting of LipoRed to the synovial vasculature was analysed by intravital microscopy (IVM) in mice with AIA. Synovial tissue was investigated at day 8 after AIA induction. Time resolved binding of liposomes was quantified at functional vessels of the microvasculature. Mice with AIA were intravenously treated with EndoMDG-12 in a therapeutic setting. Knee joints were subjected to clinical scoring and histopathology analysis. Results: In a time dependent manner, intravenously applied LipoRed enriched more then three fold in the synovial vasculature of AIA mice when compared with healthy mice. In AIA animals maximum binding measured as relative fluorescence (Fmax=142 RFU) was already achieved 5 min after LiopoRed application (tmax) and dropped to the half maximum after 100 min (tmax/2)compared with healthy mice with a Fmax=48 RFU, tmax=15 min and tmax/2=60 min. Treatment of AiA animals with EndoMDG-12 showed a clear attenuation of the course of the disease. Analysis of the clinical score and thickness of knee joints showed a significant decrease of both parameters compared with the control group. Conclusion: Based on our in vivo data, cationic liposomes seem to be very well suited to deliver compounds to rheumatoid joints for diagnosis and/or therapy. Furthermore, our results from animal experiments suggest that cationic liposomes like EndoMDG-12 could be a promising treatment option for RA

Bacterial infection of bone may result in bone destruction which is difficult to cure due to poor accessibility to bone of systemically-administrated antibiotic and poor performance of currently available local antibacterial treatments. PolyPid Ltd developed a novel local drug delivery system based on self-assembly of pharmaceutically approved lipids and polymers that encapsulate doxycycline (Doxy). The formulation is self-assembled lipid matrix via the interaction of the lipids (cholesterol and synthetic phospholipids) and biocompatible - biodegradable polymer (poly-lactic-co-glycolic). The entrapped Doxy is located within the anhydrous environment and therefore fully protected from both enzymatic and long-term water-exposure-related degradation. The fine coating of the tri-calcium phosphate (TCP) bone filler by this Doxy-containing formulation (BonyPid™) is capable of releasing intact and active drug at zero-order kinetics for a predetermined period of up to 30 days. The coating of the TCP granules with the polymer-lipids-Doxy formula (BonyPid™) did not change the granules’ macroscopic shape, but altered its color from white to pale yellow, which resemble the color of the entrapped Doxy. The average sizes of the non-coated TCP granules and the coated granules BonyPid™ were similar, as determined by measuring the widest dimension of each granule (1135±241 µm and 1072±242 µm, respectively, P=0.16). The MIC for Doxy that was released from BonyPid™ at different time points was similar to the non-encapsulated Doxy, suggesting full bioavailability of the released drug. BonyPid™ formulation structure was characterised by different physical methods including wide angle X-ray analyses (WAXS), differential scanning calorimetric (DSC) and SEM. WAXS analyses of BonyPid™ samples show a strong signal in the range of 1.3–1.8 2θ°, suggesting that the polymer and lipid TCP coating is a highly organised nano-substructure. The principle lipid in BonyPid™ formulation is phosphatidylcholine, which constitutes more than 85% of the overall lipid mass. It was found that the length of the acyl chains (14, 16 and 18 carbons, respectively) can significantly alter the release rate of Doxy during the prolonged (30 days), zero-order release phase, but did not alter the release profile. The anti-infection activity of BonyPid™ was tested in the rabbit tibia model contaminated with 5×10. 5. S. aureus. Both acute and chronic infection models were tested. Only BonyPid™ treatment demonstrated a statistically significant reduced bone absorption over the infected group (P<0.04 for day 7, 14 and 21) and significantly lower bacterial bone concentration (p>0.05) on day 21 following the bone grafting and the bacterial inoculation. In addition it was found that BonyPid™ did not reduce the osteo-conductivity as compared to non-coated TCP bone-filler. The first-in-man study for the treatment of contaminated / infected severe open long-bone fractures of BonyPid™ completed its 6 months follow-up. The results demonstrated high safety profile and significant efficacy; early bone callus formation and 0% infections in the BonyPid™ target bone fracture. Conclusion. Results demonstrate that BonyPid™ nan-technology that allow one month release of doxycycline in a controlled manner provides a new way for treating open fractures. This new local antibiotic delivery system is applicable in other medical situations associated with localised infections

Total joint replacement (TJR), such as hip and knee replacement, is commonly used for the treatment of end stage arthritis. The use of Poly (methylmethacrylate) bone cement is a gold standard in such replacement, where it fixes the implant in place and transfer stresses between bone and implant, and frequently used for local delivery of drugs such as antibiotics. The use of antibiotic loaded bone cement is considered a well-established standard in the treatment and prophylaxis of Prosthetic joint infections (PJI). PJIs is a serious problem that decreases success rate of surgery and can be life threatening to patients, where the incidence can reach up 2% in total and hip replacements and up to 40% for revision surgery. Currently used antibiotic loaded bone cements have many limitations, including burst release of < 10% of antibiotic added. This burst release falls rapidly below inhibitory level within few days, which leads to selection of resistant antimicrobial strains and does not provide prophylaxis from early and delayed stage infection. This study aims to provide a controlled release for gentamicin when loaded on Silica nanoparticles (NP) using layer-by-layer technique (LbL) to provide prophylaxis and treatment from postsurgical infections. The gentamicin loaded NPs were incorporated into PMMA bone cement and the new nanocomposite is characterized for gentamicin release, antimicrobial and mechanical properties. Our results showed that the nanocomposite gentamicin release continued for 30 days at concentration 3 times higher than the commercial formulation containing the same amount of gentamicin, where burst release for few days were observed. Moreover, the nanocomposite showed superior antimicrobial inhibition for bacterial growth and good cytocompatibility without adversely affecting the cement compressive strength, bending and fracture toughness properties

Antibiotic-loaded bone cements are used to decrease occurrence of bone infections in cemented arthroplasties and actually being considered as a more cost-effective procedure when compared to cementless implants [1]. However, considering the challenge of treating device-associated infections there is a reduced number of formulations in the market. Response from the industry to medical need is still slow considering the rapid change in the infecting microbial profile and the emergence of multiresistant strains [2]. In this context, the aim of the work is to evaluate the role of lactose (L), as a porogen, on the antibiotic release from bone cement (BC). Levofloxacin (Lev) and minocycline (M) were the selected antibiotics to be individually loaded into BC due to their low cost and potential application in bone infections [3,4].

Two types of matrices were prepared: 1) Loaded with 2.5% of antibiotics (controls) and 2) Loaded with 10% lactose and 2.5% antibiotic. In vitro drug release and microbiological tests against representative strains causative of bone infections were assessed.

Lactose significantly increased the release of both antibiotics. Complete minocycline release after one-week was observed (Fig.1A). Also, lactose increased 3.5-fold the levofloxacin released from BC (Fig.1B).

Furthermore, microbiological studies showed that no interaction was observed between lactose and antibiotic as no decrease in drugs antimicrobial activity was observed (Table 1).

Considering the results, L-BC matrix appears to be a valuable alternative to available formulations. Future work will include testing other antibiotics as well as mixtures of drugs.

Fundação para a Ciência e Tecnologia (Portuguese government) for financial support: EXCL/CTM-NAN/0166/2012 and strategic project PEst-OE/SAU/UI4013/2011.

Osteoarthritis (OA) is a joint degenerative disease leading to chronic pain and disability, thus resulting in a major socioeconomic health burden. OA, which has long been believed to be a cartilage disease, is now considered a whole-joint disorder affecting various anatomical structures, including subchondral bone.

Hyaluronic Acid (HA) is commonly used as intra-articular viscosupplementation therapy for its mechanical features and biological effects. Bisphosphonates (BPs) are antiresorptive agents inhibiting recruitment and maturation of osteoclast precursors and activity of mature osteoclasts in the bone. Pre-clinical evidences in the literature, show that intra-articular BPs could impact on OA progression, slowing down or reversing it. The combination of HA biological and mechanical role and Alendronate (ALD) antiresorptive effect could be an interesting strategy for OA treatment. This study describes the synthesis and characterization of FID-134, a new chemical derivative of HA conjugated with ALD by means of a covalent bond, cleavable in physiological condition.

FID-134 was synthesized starting from 500 kDa HA: chemical structure and functionalization degree with ALD were investigated by NMR and ICP-OES. Kinetics of ALD release from FID-134 was determined in TRIS buffer at 37°C and compared to a simple mixture of HA+ALD. 20mg/mL formulations of FID-134 and HA+ALD were investigated for viscoelastic properties, in absence and presence of Ca²⁺ ions. The cytotoxicity of FID-134 and free ALD were tested on Saos-2 osteoblasts (ATCC HTB-85) and on primary bovine chondrocytes (PBC) at day 1, 3 and 7. The efficacy of FID-134 was assessed in an inflammatory arthritis in vitro model, where bovine cartilage biopsies were exposed to IL-1β/OSM (10ng/mL) for 3 weeks; at the same time, cartilage explants were treated with FID-134. Collagen release in the surnatants was quantified and compared to controls.

FID-134 structure was confirmed by NMR and the 20% mol/mol functionalization degree was determined by ICP-OES. Only about 50% of total bound ALD was released from FID-134 within 7 days, resulting slower compared to HA+ALD mixture. In presence of Ca²⁺ ions, viscoelastic properties of FID-134 dramatically improved, while HA+ALD formulation remained unaffected. The cytotoxicity of ALD was evident at 100 μM on Saos-2 and PBC after 3 days, while no cytotoxicity was observed at 7 days with FID-134. In the cartilage explant model, a strong collagen release was detected in inflammatory conditions after 3 weeks; this tendency was reversed, and collagen release halved when FID-134 was added to the biopsies.

The synthesized HA-ALD adduct, FID-134, opens the door for a new approach for OA treatment. The results suggest that FID-134 could be beneficial in cartilage degradation and in restoration of subchondral bone function. Finally, local administration and controlled BP release would likely overcome the drawbacks of ALD oral administration, such as unspecific features and long-term toxic side effects.

Nanotechnology is the study, production and controlled manipulation of materials with a grain size < 100 nm. At this level, the laws of classical mechanics fall away and those of quantum mechanics take over, resulting in unique behaviour of matter in terms of melting point, conductivity and reactivity. Additionally, and likely more significant, as grain size decreases, the ratio of surface area to volume drastically increases, allowing for greater interaction between implants and the surrounding cellular environment. This favourable increase in surface area plays an important role in mesenchymal cell differentiation and ultimately bone–implant interactions.

Basic science and translational research have revealed important potential applications for nanotechnology in orthopaedic surgery, particularly with regard to improving the interaction between implants and host bone. Nanophase materials more closely match the architecture of native trabecular bone, thereby greatly improving the osseo-integration of orthopaedic implants. Nanophase-coated prostheses can also reduce bacterial adhesion more than conventionally surfaced prostheses. Nanophase selenium has shown great promise when used for tumour reconstructions, as has nanophase silver in the management of traumatic wounds. Nanophase silver may significantly improve healing of peripheral nerve injuries, and nanophase gold has powerful anti-inflammatory effects on tendon inflammation.

Considerable advances must be made in our understanding of the potential health risks of production, implantation and wear patterns of nanophase devices before they are approved for clinical use. Their potential, however, is considerable, and is likely to benefit us all in the future.

Cite this article: Bone Joint J 2014; 96-B: 569–73.

Periprosthetic joint infection (PJI) is a devastating complication for patients and results in greatly increased costs of care for both healthcare providers and patients. More than 15 500 revision hip and knee procedures were recorded in England, Wales and Northern Ireland in 2013, with infection accounting for 13% of revision hip and 23% of revision knee procedures.

We report our experience of using antibiotic eluting absorbable calcium sulphate beads in 15 patients (eight men and seven women with a mean age of 64.8 years; 41 to 83) as part of a treatment protocol for PJI in revision arthroplasty.

The mean follow-up was 16 months (12 to 22). We report the outcomes and complications, highlighting the risk of hypercalcaemia which occurred in three patients.

We recommend that serum levels of calcium be routinely sought following the implantation of absorbable calcium sulphate beads in orthopaedic surgery.

Cite this article: Bone Joint J 2015;97-B:1237–41.

Aims. Continuous local antibiotic perfusion (CLAP) has recently attracted attention as a new drug delivery system for orthopaedic infections. CLAP is a direct continuous infusion of high-concentration gentamicin (1,200 μg/ml) into the bone marrow. As it is a new system, its influence on the bone marrow is unknown. This study aimed to examine the effects of high-concentration antibiotics on human bone tissue-derived cells. Methods. Cells were isolated from the bone tissue grafts collected from six patients using the Reamer-Irrigator-Aspirator system, and exposed to different gentamicin concentrations. Live cells rate, apoptosis rate, alkaline phosphatase (ALP) activity, expression of osteoblast-related genes, mineralization potential, and restoration of cell viability and ALP activity were examined by in vitro studies. Results. The live cells rate (the ratio of total number of cells in the well plate to the absorbance-measured number of live cells) was significantly decreased at ≥ 500 μg/ml of gentamicin on day 14; apoptosis rate was significantly increased at ≥ 750 μg/ml, and ALP activity was significantly decreased at ≥ 750 μg/ml. Real-time reverse transcription-polymerase chain reaction results showed no significant decrease in the ALP and activating transcription factor 4 transcript levels at ≥ 1,000 μg/ml on day 7. Mineralization potential was significantly decreased at all concentrations. Restoration of cell viability was significantly decreased at 750 and 1,000 μg/ml on day 21 and at 500 μg/ml on day 28, and ALP activity was significantly decreased at 500 μg/ml on day 28. Conclusion. Our findings suggest that the exposure concentration and duration of antibiotic administration during CLAP could affect cell functions. However, further in vivo studies are needed to determine the optimal dose in a clinical setting. Cite this article: Bone Joint Res 2024;13(3):91–100

Aims. To explore key stakeholder views around feasibility and acceptability of trials seeking to prevent post-traumatic osteoarthritis (PTOA) following knee injury, and provide guidance for next steps in PTOA trial design. Methods. Healthcare professionals, clinicians, and/or researchers (HCP/Rs) were surveyed, and the data were presented at a congress workshop. A second and related survey was then developed for people with joint damage caused by knee injury and/or osteoarthritis (PJDs), who were approached by a UK Charity newsletter or Oxford involvement registry. Anonymized data were collected and analyzed in Qualtrics. Results. Survey responses (n = 19 HCP/Rs, 39 PJDs) supported studies testing pharmacological agents preventing PTOA. All HCP/Rs and 30/31 (97%) PJDs supported the development of new treatments that improved or delayed knee symptoms and damage to knee structure. PJDs thought that improving structural knee damage was more important than knee symptoms. Both groups found studies more acceptable as expected future benefit and risk of PTOA increased. All drug delivery routes were acceptable. Workshop participants (around n = 60) reflected survey views. Discussions suggested that stratifying using molecular testing for likely drug response appeared to be more acceptable than using characteristics such as sex, age, and BMI. Conclusion. Our findings supported PTOA drug intervention studies, including situations where there is low risk of disease, no expected benefit of treatment, and frequent treatment administration. PJDs appeared less risk-averse than HCP/Rs. This work reinforces the benefits of consensus and involvement work in the co-creation of PTOA drug trial design. Involvement of key stakeholders, such as PJDs with different risks of OA and regulatory representatives, are critical for trial design success. Cite this article: Bone Joint Res 2024;13(9):513–524

The Global Burden of Disease Study 2019 showed a 33.4% increase in fractures and a 65.3% increase in Years lived with disability (YLD) since 1990. Although the overall rate of fracture related infection (FRI) is low, it increases to 30% in complex fractures. In addition, the implantation of foreign materials, such as fracture stabilizing implants, decreases the number of bacteria needed to cause an infection. Then, when infections do occur, they are difficult to treat and often require multiple surgeries to heal. The bacteria can persist in the canaliculi of the bony tissue, in cells, in a biofilm on material or necrotic bone or in abscess communities. In the last decades, different approaches have been pursued to modify biomaterials as well as implant surface and to develop antimicrobial surfaces or local drug release strategies. This talk will give an introduction to the problem of bony and implant associated infections and presents the development and preclinical (as well as clinical) studies of two approaches for local drug delivery

Despite extensive research aimed at improving surgical outcomes of enthesis injuries, re-tears remain a common problem, as the repairs often lead to fibrovascular scar as opposed to a zonal enthesis. Zonal enthesis formation involves anchoring collagen fibers, synthesizing proteoglycan-rich fibrocartilage, and mineralizing this fibrocartilage [1]. During development, the hedgehog signaling pathway promotes the formation and maturation of fibrocartilage within the zonal tendon-to-bone enthesis [1-4]. However, whether this pathway has a similar role in adult zonal tendon-to-bone repair is not known. Therefore, we developed a murine anterior cruciate ligament (ACL) reconstruction model [5] to better understand the zonal tendon-to-bone repair process and perturb key developmental regulators to determine the extent to which they can promote successful repair in the adult. In doing so, we activated the hedgehog signaling pathway both genetically using transgenic mice and pharmacologically via agonist injections. We demonstrated that both treatments improved the formation of zonal attachments and tunnel integration strength [6]. These improved outcomes were due in part to hedgehog signaling's positive role in proliferation of the bone marrow stromal cell (bMSC) progenitor pool and subsequent fibrocartilage production of bMSC progeny cells that form the attachments. These results suggest that, similar to growth and development, hedgehog signaling promotes the production and maturation of fibrocartilage during tendon-to-bone integration in adults. Lastly, we developed localized drug delivery systems to further improve the treatment of these debilitating injuries in future translational studies. Acknowledgements: This work was supported by NIH R01AR076381, R21AR078429, R00AR067283, F31AR079840, T32AR007132, and P30AR069619, in addition to the McCabe Fund Pilot Award at the University of Pennsylvania

Aim. Implant infections caused by Staphylococcus aureus are difficult to treat due to biofilm formation, which complicates surgical and antibiotic treatment. Herewith we introduce an alternative approach using monoclonal antibodies (mAbs) targeting S. aureus and provide the biodistribution and specificity in a mouse implant infection model. Methods. 4497-IgG1targeting S. aureus Wall Teichoic Acid was labeled to Indium-111 using “CHXA” as a chelator. SPECT-CT scans were performed at 24, 72 and 120 hours after administration in Balb/cAnNCrl mice with a subcutaneous implant pre-colonized with biofilm of S. aureus. Biodistribution over the various organs of this labelled antibody was visualized and quantified using SPECT-CT imaging and compared to uptake at the target tissue with implant infection. Results. Uptake of the . 111. In-4497 mAbs (half-life 59 hours) at the infected implant gradually increased from 8.34%ID/g at 24 hours to 9.22%ID/g at 120 hours. Uptake at the heart/blood pool decreased over time from 11.60 to 7.58%ID/g whereas the uptake in other organs decreased from 7.26 to less than 4.66%ID/g at 120 hours. Conclusion. 111. In-4497 mAbs was found to specifically detect S. aureus and its biofilm with excellent and prolonged accumulation at the colonized implant site. Therefore, it holds great promise as a drug delivery system for diagnostic and bactericidal treatment of biofilm. However, high activity in the blood pool must be considered as it could pose a risk to healthy tissue

Aims. We aimed to determine the concentrations of synovial vancomycin and meropenem in patients treated by single-stage revision combined with intra-articular infusion following periprosthetic joint infection (PJI), thereby validating this drug delivery approach. Methods. We included 14 patients with PJI as noted in their medical records between November 2021 and August 2022, comprising eight hip and seven knee joint infections, with one patient experiencing bilateral knee infections. The patients underwent single-stage revision surgery, followed by intra-articular infusion of vancomycin and meropenem (50,000 µg/ml). Synovial fluid samples were collected to assess antibiotic concentrations using high-performance liquid chromatography. Results. The peak concentrations of vancomycin and meropenem in the joint cavity were observed at one hour post-injection, with mean values of 14,933.9 µg/ml (SD 10,176.3) and 5,819.1 µg/ml (SD 6,029.8), respectively. The trough concentrations at 24 hours were 5,495.0 µg/ml (SD 2,360.5) for vancomycin and 186.4 µg/ml (SD 254.3) for meropenem. The half-life of vancomycin was 6 hours, while that of meropenem ranged between 2 and 3.5 hours. No significant adverse events related to the antibiotic administration were observed. Conclusion. This method can achieve sustained high antibiotic concentrations within the joint space, exceeding the reported minimum biofilm eradication concentration. Our study highlights the remarkable effectiveness of intra-articular antibiotic infusion in delivering high intra-articular concentrations of antibiotics. The method provided sustained high antibiotic concentrations within the joint cavity, and no severe side-effects were observed. These findings offer evidence to improve clinical treatment strategies. However, further validation is required through studies with larger sample sizes and higher levels of evidence. Cite this article: Bone Joint Res 2024;13(10):535–545

In orthopedic surgery, implant infections are a serious issue and difficult to treat. The aim of this study was to use superparamagnetic nanoporous silica nanoparticles (MNPSNP) as candidates for directed drug delivery. Currently, short blood circulation half-life due to interactions with the host's immune system hinder nanoparticles in general from being clinically used. PEGylation is an approach to reduce these interactions and to enhance blood circulation time. The effect of PEGylation of the used . 68. Ga-labelled MNPSNP on the distribution and implant accumulation was examined by PET/CT imaging and gamma counting in an implant mouse model. Female Balb/c mice (n=24) received a magnetic implant subcutaneously on the left and a titanium implant on the right hind leg. On day one, 12 of these mice received an additional clodronate®-injection for macrophage depletion. On the second postoperative day, mice were anaesthetized and MNPSNP (native or PEGylated) injected intravenously, followed by a dynamic PET-scan over 60 minutes, a CT- and a static PET-scan at 120 min. As control, 12 mice received only . 68. Ga-MNPSNP (native or PEGylated). Gamma counting of inner organs, urine, blood and implant area was performed as further final analysis. Although PEGylation of the nanoparticles already resulted in lower liver uptakes, both variants of . 68. Ga-labeled MNPSNP accumulated in liver and spleen. Combination of PEGylation with clodronate®-injection led to a highly significant effect whereas clodronate®-injection alone could not reveal significant differences. In gamma counting, a significantly higher %I.D./g was found for the tissue surrounding the magnetic implants compared to the titanium control, although in a low range. PEGylation and/or clodronate®-injection revealed no significant differences regarding nanoparticle accumulation at the implantation site. PEGylation increases circulation time, but MNPSNP accumulation at the implant site was still insufficient for treatment of infections. Additional efforts have to further increase circulation time and local accumulation. Acknowledgements: This work is funded by the German Research Foundation (DFG, project number 280642759)