Obtaining adequate exposure is key to optimising outcomes in revision total knee arthroplasty. Goals of the exposure include protecting the extensor mechanism, safe removal of the components that are in place and implantation of the revision components. Challenges to these goals include prior skin incisions, arthrofibrosis, and patella baja. Choosing a skin incision is the first important step. The blood supply to the skin is predominantly derived MEDIALLY and thus the most LATERAL skin incision that works for obtaining exposure is selected. If skin flaps are required, they MUST be full thickness as the blood supply to the skin runs deep just over the fascial layer and partial thickness flaps risk skin necrosis. Avoid acute angles between old skin incisions of <60 degrees and kin bridges, if necessary must be at least 6cm in width. The work-horse of revision TKA is the medial parapatellar approach. It includes a generous medial release that allows the surgeon to externally rotate and deliver the tibia by pivoting on the extensor mechanism. An anterior synovectomy is then performed to re-establish the medial and lateral gutters followed by re-establishment of the space behind the patellar tendon to free it from the proximal tibia and finally subluxation of the patella (preferable to formal eversion). A lateral release (or peel of the soft tissue off of the lateral side of the patella) is a final step to mobilise the extensor mechanism (if required). After the components are removed, a posterior capsular release and re-establishment of the flexion space behind the femur further enhances tibial exposure for both bony preparation and revision component implantation. If the above maneuvers are performed, and exposure is still inadequate, the easiest way to improve exposure is by performing a quadriceps snip. This is an oblique, apical extension of the arthrotomy ACROSS THE PATELLAR TENDON (NOT in the muscle; it is hard to repair if performed in the muscle). It is repaired side to side with no need to alter postoperative physical therapy and heals reliably. A V-Y Quadricepsplasty is a proximal release of the extensor mechanism; essentially perform by connecting the apical extension of the medial parapatellar arthrotomy with a lateral release across the quadriceps tendon. It is classically indicated for patients with extensor mechanism contracture where the surgeon wishes to attempt lengthening the extensor mechanism. Usually results in increased flexion at the expense of an extensor lag and is used rarely in contemporary practice. Tibial Tubercle Osteotomy is a distal release of the extensor mechanism that is most useful for accessing the canal to remove long-stemmed cemented tibial components. It is a coronal osteotomy made from the medial side of the tubercle that is usually made 5–8cm in length, tapering from approximately 1cm thick proximally to 5mm distally

Tendons mainly consist of collagen in order to withstand high tensile forces. Compared to other, high turnover tissues, cellularity and vascularity in tendons are low. Thus, the natural healing process of tendons takes long and can be problematic. In case of injury to the enthesis, the special transition from tendon over cartilage to bone is replaced by a fibrous scar tissue, which remains an unsolved problem in rotator cuff repair.

To improve tendon healing, many different approaches have been described using scaffolds, stem cells, cytokines, blood products, gene therapy and others. Despite promising in vitro and in vivo results, translation to patient care is challenging. In clinics however, tendon auto- or allografts remain still first choice to augment tendon healing if needed.

Therefore, it is important to understand natural tendon properties and natural tendon healing first. Like in other tissues, senescence of tenocytes seems to play an important role for tendon degeneration which is interestingly not age depended. Our in vivo healing studies have shown improved and accelerated healing by adding collagen type I, which is now used in clinics, for example for augmentation of rotator cuff repair. Certain cytokines, cells and scaffolds may further improve tendon healing but are not yet used routinely, mainly due to missing clinical data, regulatory issues and costs.

In conclusion, the correct diagnosis and correct first line treatment of tendon injuries are important to avoid the necessity to biologically augment tendon healing. However, strategies to improve and accelerate tendon healing are still desirable. New treatment opportunities may arise with further advances in tendon engineering in the future.

Infections are among the most diffused complications of the implantation of medical devices. In orthopedics, they pose severe societal and economic burden and interfere with the capability of the implants to integrate in the host bone, significantly increasing failure risk. Infection is particularly severe in the case of comorbidities and especially bone tumors, since oncologic patients are fragile, have higher infection rate and impaired osteoregenerative capabilities. For this reason, prevention of infection is to be preferred over treatment.

This is even more important in the case of spine surgery, since spine is among the main site for tumor metastases and because incidence of post operative surgical-site infections is significant (up to 15-20%) and surgical options are limited by the need of avoiding damaging the spinal cord.

Functionalization of the implant surfaces, so as to address infection and, possibly, co- adjuvate anti-tumor treatments, appears as a breakthrough innovation. Unmet clinical needs in infection and tumors is presented, with a specific focus on the spine, then, new perspectives are highlighted for their treatment.

Total hip arthroplasty (THA) has proved to be an effective treatment modality for sickle-cell hip arthropathy (mosaic-like dense bone due to infarcts). However, mode of failure, survival rates and challenges associated with revision hip arthroplasty in sickle-cell disease patients are mostly unknown.

We retrospectively evaluated prospectively collected data from all patients with sickle-cell disease who underwent revision hip arthroplasty from 2016. Patient, surgery, medical and surgical complications related data were collected. The pinnacle and reclaim revision system with gription augments (JJ) was used in all patients. Pre-op and post-op clinical outcome data (both objective and subjective, HOOS Jr and OHS) were recorded. Cumulative success rates were recorded with re-revision surgery as an end point.

We performed fifteen revision THAs on 13 patients (mean follow up of 6.6 years). The mean age of the patients was 48 years (range, 30–59). At final follow-up, a statistically significant improvement of mean OHS and HOOS JR scores eas found in all patients. reported (OHS: 34.0 and HOOS JR: 77.7). Cumulative success rate was 100% for re-revision for all reasons at 6 years. Five intensive care unit (ITU) admissions, two vaso-occlusive sickle cell crises, one transfusion-related complication and one acute chest syndrome (ACS) were recorded. On admission, the mean percentage of HbS was 75.25% (64.6–86.4%).

Revision arthroplasty in sickle-cell disease patients poses increased risks, with medical and surgical challenges. However, with careful preparation, planning and a multi-disciplinary team approach, revision arthroplasty can result in excellent clinical outcomes and excellent functional scores in the majority of patients in the short and mid-term.

Virtual physiotherapy has been provided to hundreds of patients at the Holland Centre during the COVID pandemic. As we plan for virtual care to be one part of our care delivery we want to evaluate it and ensure the care delivery is safe and effective.

The objectives of this project was two-fold: 1) to examine the outcome of virtual physiotherapy and/ or a hybrid of virtual and in-person care in patients who received post-operative treatment following total knee replacement at the Holland Centre, 2) to explore the challenges of virtual care participation in the joint replacement population.

Patients who received either virtual care or a combination of in-person and virtual care (hybrid model) based on the patients’ needs were included. Patient-related outcomes were the Patient Specific Functional Scale (PSFS) and pain scale. Flexion and extension range of motion were measured before and after treatment. A modified Primary Care Patient Experience Virtual Care Survey was used to examine barriers for virtual care.

Sixty patients, mean age 68(8), ranging between 45-83 years, 34(57%) females, who received either virtual care or a combination of in-person and virtual care based on the patients’ needs were included. Patients showed improvement in the PSFS and pain scores (p<0.0001). Flexion (p<0.0001) and extension (p=0.02) improved at a statistically significant level. A separate sample (N=54) (age range 50-85 years) completed the patient experience survey.

A well-designed post-operative virtual physiotherapy program, initially implemented to maintain continuity of care during the pandemic, continues to be an important part of our model of care as we normalize our activities. Clear understanding of barriers to virtual care and mitigation strategies will help us create virtual care standards, meet our patient needs, optimize our care delivery and potentially increase the use of virtual rehab in the future.

The application of immune regenerative strategies to deal with unsolved pathologies, such as tendinopathies, is getting attention in the field of tissue engineering exploiting the innate immunomodulatory potential of stem cells [1]. In this context, Amniotic Epithelial Cells (AECs) represent an innovative immune regenerative strategy due to their teno-inductive and immunomodulatory properties [2], and because of their high paracrine activity, become a potential stem cell source for a cell-free treatment to overcome the limitations of traditional cell-based therapies. Nevertheless, these immunomodulatory mechanisms on AECs are still not fully known to date. In these studies, we explored standardized protocols [3] to better comprehend the different phenotypic behavior between epithelial AECs (eAECs) and mesenchymal AECs (mAECs), and to further produce an enhanced immunomodulatory AECs-derived secretome by exposing cells to different stimuli. Hence, in order to fulfill these aims, eAECs and mAECs at third passage were silenced for CIITA and Nrf2, respectively, to understand the role of these molecules in an inflammatory response. Furthermore, AECs at first passage were seeded under normal or GO-coated coverslips to study the effect of GO on AECs, and further exposed to LPS and/or IL17 priming to increase the anti-inflammatory paracrine activity. The obtained results demonstrated how CIITA and Nrf2 control the immune response of eAECs and mAECs, respectively, under standard or immune-activated conditions (LPS priming). Additionally, GO exposition led to a faster activation of the Epithelial-Mesenchymal transition (EMT) through the TGFβ/SMAD signaling pathway with a change in the anti-inflammatory properties. Finally, the combinatory inflammatory stimuli of LPS+IL17 enhanced the paracrine activity and immunomodulatory properties of AECs. Therefore, AECs-derived secretome has emerged as a potential treatment option for inflammatory disorders such as tendinopathies.

Acknowledgement: This research is part of the P4FIT project ESR1, funded under the H2020-ITN-EJD-Marie-Skłodowska-Curie grant agreement 955685.

Aims

This Delphi study assessed the challenges of diagnosing soft-tissue knee injuries (STKIs) in acute settings among orthopaedic healthcare stakeholders.

Stem cells represent an exciting biological therapy for the management of many musculoskeletal tissues that suffer degenerative disease and/or where the reparative process results in non-functional tissue (‘failed healing’). The original hypothesis was that implanted cells would differentiate into the target tissue cell type and synthesise new matrix. However, this has been little evidence that this happens in live animals compared to the laboratory, and more recent theories have focussed on the immunomodulatory effects via the release of paracrine factors that can still improve the outcome, especially since inflammation is now considered one of the central processes that drive poor tendon healing. Because of the initial ‘soft’ regulatory environment for the use of stem cells in domestic mammals, bone and fat-derived stem cells quickly established themselves as a useful treatment for naturally occurring musculoskeletal diseases in the horse more than 20 years ago (Smith, Korda et al. 2003). Since the tendinopathy in the horse has many similarities to human tendinopathy, we propose that the following challenges and, the lessons learnt, in this journey are highly relevant to the development of stem cells therapies for human tendinopathy:

Introduction

At Sheffield Children's Hospital, treatment of leg length discrepancy is a common procedure. Historically, this has been done with external fixators. With the development in intramedullary technology, internal nails have become the preferred modality for long bone lengthening in the adolescent population. However, it is important to review whether this technology practically reduces the known challenges seen and if it brings any new issues. Therefore, the aim of this review is to retrospectively evaluate the therapeutic challenges of 16 fit-bone intramedullary femoral lengthening's at Sheffield Children's Hospital between 2021–2022.

Challenging cases in shoulder surgery emphasizing joint reconstruction will be presented to a distinguished panel of experts. Audience participation will be encouraged.

Preoperative assessment, imaging, operative techniques, and postoperative care will be emphasised. Special focus will be on shoulder replacement, especially reverse shoulder arthroplasty.

This session will present a series of challenging and complex primary and revision cases to a panel of internationally respected knee arthroplasty experts.

The primary cases will include challenges such as patient selection and setting expectations, exposure, alignment correction and balancing difficulties. In the revision knee arthroplasty scenarios issues such as bone stock loss, fixation challenges, instability and infection management will be discussed.

This will be an interactive case-based session that at its conclusion should leave the attendee with a more thorough approach to these challenging issues.

The challenges faced by hip surgeons have changed over the last decade. Historically, fixation, polyethylene wear, osteolysis, loosening and failure to osseointegrate dominated the discussions at hip surgery meetings. With the introduction of highly crosslinked polyethylene, wear and osteolysis are currently not significant issues. Improved surgical technique has resulted in a high rate of osseointegration and once fixed, loosening of cementless components is rare.

In this session, we will focus on issues that orthopaedic surgeons performing hip surgery routinely face including bearing couples in the young active patient, implant choices in the dysplastic hip and osteoporotic femur, evaluation and management of the unstable hip and differential diagnosis of the painful THR.

In severe cases of total knee & hip arthroplasty, where off-the-shelf implants are not suitable (i.e., in cases with extended bone defects or periprosthetic fractures), 3D-printed custom-made knee & hip revision implants out of titanium or cobalt-chromium alloy represent one of the few remaining clinical treatment options. Design verification and validation of such custom-made implants is very challenging. Therefore, a methodology was developed to support surgeons and engineers in their decision on whether a developed design is suitable for the specific case. A novel method for the pre-clinical testing of 3D-printed custom-made knee implants has been established, which relies on the biomechanical test and finite element analysis (FEA) of a comparable clinically established reference implant. The method comprises different steps, such as identification of the main potential failure mechanism, reproduction of the biomechanical test of the reference implant via FEA, identification of the maximum value of the corresponding FEA quantity of interest at the required load level, definition of this value as the acceptance criterion for the FEA of the custom-made implant, reproduction of the biomechanical test with the custom-made implant via FEA, decision making for realization or re-design based on the acceptance criterion is fulfilled or not. Exemplary cases of custom-made knee & hip implants were evaluated with this new methodology. The FEA acceptance criterion derived from the reference implants was fulfilled in both custom-made implants and subsequent biomechanical tests verified the FEA results. The suggested method allows a quantitative evaluation of the biomechanical properties of custom-made knee & hip implant without performing physical bench testing. This represents an important contribution to achieve a sustainable patient treatment in complex revision total knee & hip arthroplasty with custom-made 3D printed implants in a safe and timely manner.

Clinical cases will be presented to a panel of experienced arthroplasty surgeons to illustrate how principles tempered by experience, are applied to challenging problems. (request pertinent additional material from kellyvince@mac.com)

Advances in our understanding of skeletal stem cells and their role in bone development and repair, offer the potential to open new frontiers in bone regeneration. However, the ability to harness these cells to replace or restore the function of traumatised or lost skeletal tissue as a consequence of age or disease remains a significant challenge. We have developed protocols for the isolation, expansion and translational application of skeletal cell populations with cues from developmental biology informed by in vitro and ex vivo models as well as, nanoscale architecture and biomimetic niche development informing our skeletal tissue engineering approaches. We demonstrate the importance of biomimetic cues and delivery strategies to directly modulate differentiation of human adult skeletal cells and, central to clinical application, translational studies to examine the efficacy of skeletal stem and cell populations in innovative scaffold compositions for orthopaedics. While a number of challenges remain multidisciplinary approaches that integrate developmental and engineering processes as well as cell, molecular and clinical techniques for skeletal tissue engineering offer significant promise. Harnessing such approaches across the hard tissue interface will ultimately improve the quality of life of an increasing ageing population.

This session will present a series of challenging and complex primary and revision cases to a panel of internationally respected hip arthroplasty experts. The primary cases will include challenges such as hip dysplasia, altered bony anatomy and fixation challenges. In the revision hip arthroplasty scenarios issues such as bone stock loss, leg length discrepancy, instability and infection will be discussed. This will be an interactive case-based session that at its conclusion should leave the attendee with a more thorough approach to these challenging issues.

This session will present a series of challenging and complex primary and revision cases to a panel of internationally respected knee arthroplasty experts.

The primary cases will include challenges such as patient selection and setting expectations, exposure, alignment correction and balancing difficulties. In the revision knee arthroplasty scenarios issues such as bone stock loss, fixation challenges, instability, and infection management will be discussed.

This will be an interactive case based session that at its conclusion should leave the attendee with a more thorough approach to these challenging issues.

Challenging shoulder cases will be presented and discussed by a panel of experts in the field. Emphasis will be on restoring glenohumeral anatomy, repairing or reconstructing the rotator cuff, and supervising rehabilitation. Different surgical options and new emerging technologies will be reviewed while highlighting the pros and cons of each.

Not all knee surgery cases are created equal is a maxim that holds true for both primary and revision scenarios. Complex cases involve patients presenting with compromised bone and/or soft tissue. For primary knees, these include cases with bony deformity or deficiency, severe malalignment, arthrofibrosis, ligamentous instability or contracture, prior fracture or trauma with or without failed fixation, prior hardware complicating component placement, or compromised extensor mechanism. In revision surgery, complex scenarios include cases compromised by bone loss, deterioration of the soft tissues and resulting instability, periprosthetic fracture, leg length discrepancy, infection, and more recently, hypersensitivity reactions. In this interactive session, a moderator and team of experts will discuss strategies for evaluation and management of a variety of challenging knee case scenarios.