Objective

The purpose of this study was to determine the outcomes of revision ankle replacements, using the Invision implant and impaction allograft for massive talar dome defects following primary ankle replacement failure. Outcomes were assessed in terms of bone graft incorporation; improvement in patient reported outcome measures (PROMs); and survivorship of the revision ankle arthroplasty.

The last decade has seen a considerable increase in the use of in total ankle arthroplasty (TAA) to treat patients with end-stage arthritis of the ankle. However, the longevity of the implants is still far from that of total knee and hip arthroplasties.

The aim of this review is to outline a diagnostic and treatment algorithm for the painful TAA to be used when considering revision surgery.

Cite this article: Bone Joint J 2017;99-B:5–11.

Aims

Our primary aim was to establish the proportion of female orthopaedic consultants who perform arthroplasty via cases submitted to the National Joint Registry (NJR), which covers England, Wales, Northern Ireland, the Isle of Man, and Guernsey. Secondary aims included comparing time since specialist registration, private practice participation, and number of hospitals worked in between male and female surgeons.

Aims

Despite the increasing numbers of ankle arthroplasties, there are limited studies on their survival and comparisons between different implants. The primary aim of this study was to determine the failure rates of primary ankle arthroplasties commonly used in the UK.

Introduction. While advances in joint-replacement technology have made total ankle arthroplasty a viable treatment for end-stage arthritis, revision rates for ankle replacements are higher than in hip or knee replacements [1]. The questions asked in this study were (1) what retrieved ankle devices demonstrate about ankle arthroplasty failures, and (2) how do these failures compare to those seen in the hip and the knee?. Materials and Methods. An IRB-approved retrieval laboratory received retrieved polyethylene inserts and surgeon-supplied reason for revision from 70 total-ankles (7 designs, including five currently-marketed designs) from 2002 to the present. All retrievals were rated for clinical damage. Polyethylene inserts received six months or less after retrieval (n=45) were analyzed for oxidation using Fourier Transform Infrared (FTIR) spectroscopy, reported as maximum ketone oxidation index [2]. Insert sterilization method was verified using trans-vinylene index [3]. Oxidation measured in the 45 ankle inserts versus their time in vivo was compared to oxidation rates previously published for gamma-sterilized hip and knee polyethylene retrievals [6]. Statistical analysis was performed using IBM SPSS v.22. Results. The ankle devices were retrieved most commonly for loosening (n=22) followed by polyethylene fracture (n=9). These failure modes occurred after statistically different in vivo time (loosening: mean=4.4±3.6 years; polyethylene insert fracture: mean=9.5±4.1 years; p=0.002). Presence of clinical fatigue (cracking and/or delamination) was identified in 24 of the 70 retrieved inserts, and its presence correlated with in vivo time (Spearman's rho =0.449, p<0.001). Thirteen of these fatigued inserts were analyzed by FTIR. TVI analysis confirmed the sterilization method of the fatigued inserts: 12 gamma, 1 non-gamma sterilized. All 13 fatigued inserts had maximum ketone oxidation index (KOI) of 1.2 or higher. Presence of fatigue correlated with measured oxidation (Spearman's rho =0.685, p<0.001). Six of the 9 inserts that fractured in vivo were analyzed by FTIR. All were gamma-sterilized, and all had oxidation of 1.2 or higher. Oxidation rate determined for most of the 45 ankle inserts was at or above oxidation rates previously published for gamma-sterilized hip and knee polyethylene retrievals [6]. Discussion. This retrieval study concurs with the ankle arthroplasty literature that loosening is the most common reason for ankle revision [4]. Ankle inserts retrieved as a result of implant loosening had lower oxidation and no fatigue damage resulting from their shorter in vivo time. Fatigued and/or fractured inserts were in vivo for longer times, allowing more oxidation to occur. The effect of oxidation on polyethylene tensile strength and ductility has been reported for tibial inserts [5]. Oxidation above the critical value [5] has a dramatic effect on the ability of the polyethylene to resist fatigue damage and fracture, since the toughness of the polyethylene drops to near zero. All fatigued and fractured ankle inserts had oxidation that exceeded this critical oxidation. Most ankle inserts, whether gamma or non-gamma sterilized, oxidized at or above the oxidation rates previously published for gamma-sterilized hip and knee polyethylene retrievals [6]

The National Joint Registry (NJR) was established in 2003, and was extended to include ankle arthroplasty on 1. st. April 2010, and shoulder and elbow arthroplasty in April 2012. The aim of this study was to evaluate the uptake of the NJR for ankle arthroplasty over its first 3 years. This is compared to the first 3 years of hip and knee data, and the first year of shoulder and elbow data. The methods of measuring compliance are also evaluated. NJR compliance is measured by comparing the number of procedures submitted to the NJR, against the number of levies raised through implant sales. This applies to all of the UK, and both independent and NHS providers. However, compliance can also be measured by comparing NJR submissions with data submitted to the Hospital Episode Statistics (HES) database. This only relates to NHS institutions in England. The NJR ankle data was compared to implant data, and adjusted to compare to HES data, to evaluate the different methods of measuring compliance. We also compared these figures with the first 3 years for hip and knee arthroplasties and the first year for shoulder and elbow arthroplasties. Results:. In 2011 there were 493 arthroplasties and the compliance was 64% against industry data. In 2012 there were 590 procedures with compliance improved to 77% against industry data. When adjusting NJR to compare with HES data, the compliance was 87% in 2012., with 507 ankle arthroplasties registered with the NJR and 582 on HES data. The reasons for this discrepancy are discussed. The specific difficulties of capturing ankle revisions are discussed, as some get revised to arthrodeses. The uptake is significantly higher than the first year for all other joints (shoulders 52%, hips 57%, knees 57%, and elbows 60%)

Post-operative surgical site infection following total joint arthroplasty occurs at rates between ~ 0.2–5 %, depending on the joint and the surgeon volume, as well as various patient risk factors. Given that an estimated over 700,000 knee and hip arthroplasties are performed in the US each year this translates to thousands of patients that are affected by this serious, costly and traumatic complication. In addition, it is now recognized that clinical culturing underestimates the infection rate and that a number of aseptic loosenings might actually have an infectious etiology. We have used a combination of non-culture based molecular methods to detect bacteria associated with hardware, antimicrobial impregnated cement, reactive tissue and pus collected during revision surgery in a total elbow arthroplasty (TEA) case and a total ankle revision (TAR) case. Confocal microscopy showed live cocci in biofilm cell clusters, and fluorescent in situ hybridization (FISH) demonstrated S. aureus biofilms. Reverse transcriptase (RT)-PCR, and multiplex PCR coupled with electrospray-ionization mass spectrometry (Ibis T5000) to identify S. aureus, S. epidermidis and genes for methicillin resistance. Together our complimentary techniques comprise compelling evidence that viable biofilm bacteria played an important role in the refractory infections in these cases

We present our experience of using tension band plates to achieve guided growth in children for correction of calcaneus deformity of the ankle. 11 consecutive patients (13 ankles) fulfilled the inclusion criteria over a 4-year period. All underwent surgical treatment using a flexible two hole plate and screws on the posterior aspect of distal tibial physis. Measurements were done on preoperative, intraoperative screening and 1-year post operative plain AP and lateral ankle radiographs. The anterior distal tibia angle (ADTA), lateral distal tibial angle (LDTA) and screw divergence angle (angle subtended by lines passing through the long axis of the screws) were used to assess the deformity correction. A 2 tailed student t-test was carried out on the initial and 1-year post-op measurements to determine statistical significance with a p value <0.05 considered as significant. There were 10 residual clubfoot deformities, 2 post-traumatic deformities and 1 spinal tumor causing deformity. The average age of the patients was 10 years 5 months (range 4 to 13 years). There were 9 males and 2 females. The ADTA showed a statistically significant change with a p value of 0.0008 with a mean correction of 8.6 degrees (range of 2.3 to 15.6 degrees). The SDA demonstrated a mean correction of 15.4 degrees (range 0.3 to 41.8 degrees), p=0.002. The LDTA did not change significantly (p= 0.08), thus confirming no coincidental coronal plane deformity had occurred. 5 ankles required revision of fixation due to metalwork reaching its maximum limit of divergence at an average of 1 year. 2 ankles had screw pulled out due to osteolysis around the screw. There were no cases of infection. We report satisfactory short-term results of correction of calcaneus deformity using a flexible tension band plate and screws system

Introduction: Total ankle replacement is proving a reliable procedure for ankle arthrosis. Some authors have recommended that significant hindfoot deformity should be a contraindication. This study aims to provide guidance on the management of this difficult problem. Methods: 170 consecutive total ankle replacements were performed in 147 patients, aged 32–83 (mean 65) between 1999 and 2006 by a single surgeon. All surviving patients (5 deaths) were followed up prospectively on an annual basis, for a mean of 3 years (1–8 years). Comparison was made between Group A (45 ankles with a hindfoot deformity of > 10° varus or valgus) and Group B (the remaining 120 ankles). Results: There was no statistical difference between the 2 groups for age, sex or indication for surgery (osteoarthritis in 81%). Group A comprised 8 valgus and 36 varus ankles. 23/36 varus ankles had a deformity of > 20°. 6 revisions (13%) were performed in Group A (5 of these related to instability – all preoperatively varus of > 20 degrees). 10 revisions (8%) were performed in Group B (2 related to instability). 6 ankles underwent intra-operative deltoid release and 6 had pre or post-operative calcaneal osteotomy. Only one of these required revision for instability. 4 ankles underwent post-operative lateral ligament reconstruction. These ankles all failed due to instability. The mean postoperative American Foot and Ankle Society score in Group A was 85, compared to 78 in Group B. Discussion: Our study reveals that patients with significant hindfoot deformity may benefit from total ankle replacement. However, the risk of revision due to instability and need for further surgery is higher, especially with a varus deformity of > 20°. Almost a quarter of these ankles required revision. Potential solutions may be to correct the deformity with additional calcaneal osteotomy or medial release, whereas lateral ligament reconstruction alone is inadequate

Aims

A failed total ankle arthroplasty (TAA) is often associated with much bone loss. As an alternative to arthrodesis, the surgeon may consider a custom-made talar component to compensate for the bone loss. Our aim in this study was to assess the functional and radiological outcome after the use of such a component at mid- to long-term follow-up.

We report the incidence and intensity of persistent pain in patients with an otherwise uncomplicated total ankle replacement (TAR). Arthroscopic debridement was performed in selected cases and the clinical outcome was analysed.

Among 120 uncomplicated TARs, there was persistent pain with a mean visual analogue scale (VAS) of 2.7 (0 to 8). The intensity of pain decreased in 115 ankles (95.8%). Exercise or walking for more than 30 minutes was the most common aggravating factor (62 ankles, 68.1%). The character of the pain was most commonly described as dull (50 ankles, 54.9%) and located on the medial aspect of the joint (43 ankles, 47.3%).

A total of seven ankles (5.8%) underwent subsequent arthroscopy. These patients had local symptoms and a VAS for pain ≥ 7 on exertion. Impingement with fibrosis and synovitis was confirmed. After debridement, the median VAS decreased from 7 to 3 and six patients were satisfied. The median VAS for pain and the American Orthopaedic Foot and Ankle Society score of the ankles after debridement was similar to that of the uncomplicated TARs (p = 0.496 and p = 0.066, respectively).

Although TAR reduces the intensity of pain, residual pain is not infrequent even in otherwise uncomplicated TARs and soft-tissue impingement is the possible cause.

Cite this article: Bone Joint J 2013;95-B:378–83.