Introduction. Charcot neuroarthropathy is a limb threatening condition and the optimal surgical strategy for limb salvage in gross foot deformity remains unclear. We present our experience of using fine wire frames to correct severe midfoot deformity, followed by internal beaming to maintain the correction. Materials and Methods. Nine patients underwent this treatment between 2020–2023. Initial deformity correction by Ilizarov or hexapod butt frame was followed by internal beaming with a mean follow up of 11 months. A retrospective analysis of radiographs and electronic records was performed. Meary's angle, calcaneal pitch, cuboid height, hindfoot midfoot angle and AP Meary's angle were compared throughout treatment. Complications, length of stay and the number of operations are also described. Results. Mean age was 53 years (range:40–59). Mean frame duration was 3.3 months before conversion to beaming. Prior frame-assisted deformity correction resulted in consistently improved radiological parameters. Varying degrees of subsequent collapse were universal, but 5 patients still regained mobility and a stable, plantargrade, ulcer-free foot. Complications were common, including hardware migration (N=6,66%), breakage (N=2,22%), loosening (N=3,33%), infection (N=4,44%), 1 amputation and an unscheduled reoperation rate of 55%. Mean cumulative length of stay was 42 days. Conclusions. Aggressive deformity correction and internal fixation for Charcot arthropathy requires strategic and individualised care plans. Complications are expected for each patient. Patients must understand this is a limb salvage scenario. This management strategy is resource heavy and requires timely interventions at each stage with a well-structured MDT delivering care. The departmental learning points are to be discussed

Introduction and Objective. The treatment of severe deformities often requiring aggressive techniques such as vertebral resection and osteotomies with high comorbidity. To mitigate this risk, several methods have been used to achieve a partial reduction of stiff curves. The objective of this study was to evaluate and quantify the effectiveness of the Perioperative Halo-Gravity Traction (HGT) in the Treatment of Severe Spinal Deformity in Children. Materials and Methods. A historical cohort of consecutive childs with severe spinal deformity who underwent to a perioperative HGT as a part of the treatment protocol. Minimum follow-up of 2 years. Demographic, clinical and radiological data, including time duration of perioperative HGT and Cobb angle in the coronal and sagittal plane. The radiological variables were measured before the placement of the halo, after placement of the halo, at the end of the period of traction, after surgery and in the final follow-up. Results. Seventeen males (57%) and twenty females (43%) were included in the final analysis. The mean age was 6.5 years (SD 4.8). The most frequent etiology for the spinal deformity was syndromic (13 patients). The average preoperative Cobb angle was 88º (range, 12–135). HGT was used in 17 cases prior to a primary surgery and in 20 cases prior to a revision surgery. After the HGT, an average correction of 34% of the deformity was achieved (p <0.05). After the surgery this correction improved. At 2-year follow-up there was a correction loss of 20% (p <0.05). There were 3 complications (8.1%): 2 pin infections and cervical subluxation. Conclusions. The application of HGT in cases of severe rigid deformity is useful allowing a correction of the preoperative deformity of 34%, facilitating surgery. Preoperative HGT seems to be a safe and effective intervention in pediatric patients with high degree deformity

Severe hallux valgus deformity is conventionally treated with proximal metatarsal osteotomy. Distal metatarsal osteotomy with an associated soft-tissue procedure can also be used in moderate to severe deformity. We compared the clinical and radiological outcomes of proximal and distal chevron osteotomy in severe hallux valgus deformity with a soft-tissue release in both. A total of 110 consecutive female patients (110 feet) were included in a prospective randomised controlled study. A total of 56 patients underwent a proximal procedure and 54 a distal operation. The mean follow-up was 39 months (24 to 54) in the proximal group and 38 months (24 to 52) in the distal group. At follow-up the hallux valgus angle, intermetatarsal angle, distal metatarsal articular angle, tibial sesamoid position, American Orthopaedic Foot and Ankle Society (AOFAS) hallux metatarsophalangeal-interphalangeal score, patient satisfaction level, and complications were similar in each group. Both methods showed significant post-operative improvement and high levels of patient satisfaction. Our results suggest that the distal chevron osteotomy with an associated distal soft-tissue procedure provides a satisfactory method for correcting severe hallux valgus deformity. Cite this article: Bone Joint J 2013;95-B:510–16

Deformity correction is a fundamental goal in total knee arthroplasty. Severe valgus deformities often present the surgeon with a complex challenge. These deformities are associated with abnormal bone anatomy, ligament laxity and soft tissue contractures. Distorted bone anatomy is due to bone loss on the lateral femoral condyle, especially posteriorly. To a lesser extent bone loss occurs from the lateral tibia plateau. The AP axis (Whiteside's Line) or epicondylar axis must be used as a rotational landmark in the severely valgus knee. Gap balancing techniques can be helpful in the severely valgus knee, but good extension balance must be obtained before setting femoral rotation with this technique. Coronal alignment is generally corrected to neutral or 2- to 3-degree overcorrection to mild mechanical varus to unload the attenuated medial ligaments. The goal of soft tissue releases is to obtain rectangular flexion and extension gaps. Soft tissue releases involve the IT band, posterolateral corner/arcuate complex, posterior capsule, LCL, and popliteus tendon. Assessment of which structures is made and then releases are performed. In general, pie crust release of the IT band is sufficient for mild deformity. More severe deformities require release of the posterolateral corner / arcuate and posterior capsule. I prefer a pie crust technique, while Ranawat has described the use of electrocautery to perform these posterior/ posterolateral releases. In most cases the LCL is not released, however, this can be released from the lateral epicondyle, if necessary. Good ligament balance can be obtained in most cases, however, some cases with severe medial ligament attenuation require additional ligament constraint such as a constrained condylar implant

Deformity correction is a fundamental goal in total knee arthroplasty. Severe valgus deformities often present the surgeon with a complex challenge. These deformities are associated with abnormal bone anatomy, ligament laxity and soft tissue contractures. Distorted bone anatomy is due to bone loss on the lateral femoral condyle, especially posteriorly. To a lesser extent bone loss occurs from the lateral tibia plateau. The AP Axis (Whiteside's Line) or Epicondylar axis must be used as a rotational landmark in the severely valgus knee. Gap balancing techniques can be helpful in the severely valgus knee, but good extension balance must be obtained before setting femoral rotation with this technique. Coronal alignment is generally corrected to neutral or 2- to 3-degree overcorrection to mild mechanical varus to unload the attenuated medial ligaments. The goal of soft tissue releases is to obtain rectangular flexion and extension gaps. Soft tissue releases involve the IT band, Posterolateral Corner/Arcuate Complex, Posterior Capsule, LCL, and Popliteus Tendon. Assessment of which structures is made and then releases are performed. In general Pie Crust release of the ITB is sufficient for mild deformity. More severe deformities require release of the Posterolateral Corner/Arcuate Complex and Posterior Capsule. I prefer a pie crust technique, while Ranawat has described the use of electrocautery to perform these posterior/ posterolateral releases. In most cases the LCL is not released, however, this can be released from the lateral epicondyle, if necessary. Good ligament balance can be obtained in most cases, however, some cases with severe medial ligament attenuation require additional ligament constraint such as a constrained condylar implant

Intertrochanteric osteotomy may postpone the need for total hip replacement (THR). In young patients with an acquired deformity of the femoral head and secondary osteoarthritis, a valgus intertrochanteric osteotomy may allow better congruency but the acetabular cover may become insufficient because of subluxation of the femoral head. In patients with a spherical femoral head and acetabular dysplasia, cover can still remain insufficient after varus displacement osteotomy. We present the long-term results of intertrochanteric osteotomy combined with an acetabular shelfplasty in both these circumstances.

Sixteen hips (15 patients) with a deformed femoral head, and ten (seven patients) with a spherical femoral head, underwent an intertrochanteric osteotomy and acetabular shelfplasty. The mean age at the time of surgery was 30 and 37 years and the mean final follow-up was 15 and 19 years, respectively. Six patients in the deformed group, but only one in the spherical group, had required a THR by the time of their final follow-up. In both groups, those who had not undergone a THR had a good result.

Acetabular shelfplasty is an excellent addition to an intertrochanteric osteotomy and gives full cover of the femoral head in patients with a deformity of the head and secondary osteoarthritis.

Management of a knee with valgus deformities has always been considered a major challenge. Total knee arthroplasty requires not only correction of this deformity but also meticulous soft tissue balancing and achievement of a balanced rectangular gap. Bony deformities such as hypoplastic lateral condyle, tibial bone loss, and malaligned/malpositioned patella also need to be addressed. In addition, external rotation of the tibia and adaptive metaphyseal remodeling offers a challenge in obtaining the correct rotational alignment of the components. Various techniques for soft tissue balancing have been described in the literature and use of different implant options reported. These options include use of cruciate retaining, sacrificing, substituting and constrained implants. Purpose. This presentation describes options to correct a severe valgus deformity (severe being defined as a femorotibial angle of greater than 15 degrees) and their long term results. Methods. 34 women (50 knees) and 19 men (28 knees) aged 39 to 84 (mean 74) years with severe valgus knees underwent primary TKA by a senior surgeon. A valgus knee was defined as one having a preoperative valgus alignment greater than 15 degrees on a standing anteroposterior radiograph. The authors recommend a medial approach to correct the deformity, a minimal medial release and a distal femoral valgus resection of angle of 3 degrees. We recommend a sequential release of the lateral structures starting anteriorly from the attachment of ITB to the Gerdy's tubercle and going all the way back to the posterolaetral corner and capsule. Correctability of the deformity is checked sequentially after each release. After adequate posterolateral release, if the tibial tubercle could be rotated past the mid-coronal plate medially in both flexion and extension, it indicated appropriate soft tissue release and balance. Fine tuning in terms of final piecrusting of the ITB and or popliteus was carried out after using the trial components. Valgus secondary to an extra-articular deformity was treated using the criteria of Wen et al. In our study the majority of severe valgus knees (86%) could be treated by using unconstrained (CR, PS) knee options reserving the constrained knee / rotating hinge options only in cases of posterolateral instability secondary to an inadequate large release or in situations with very lax or incompetent MCL. Results. The average follow up was 10 years (range 8 to 14 years). The average HSS knee scores improved from 48 points preoperatively (range 32 to 68 points) to 91 points (range 78 to 95 points) postoperatively. The average postoperative range of motion measured with a goniometer was 110 degrees (range 80 to 135 degrees) which was a significant improvement over the preoperative levels (average 65 degrees). None of the patients were clinically unstable in the medioloateral or anteroposterior plane at the time of final follow up. The average preoperative valgus tibiofemoral alignment was 19.6 degrees (range 15 degrees to 45 degrees). Postoperatively the average tibio-femoral alignment was 5 degrees (range 2 degrees to 7 degrees) of valgus. No patient in the study was revised. Conclusion. Adequate lateral soft tissue release is the key to successful TKA in valgus knees. The choice of implant depends on the severity of the valgus deformity and the extent of soft tissue release needed to obtain a stable knee with balanced flexion and extension gaps. The most minimal constraint needed to achieve stability and balance was used in this study. In our experience the long term results of TKR on severe valgus deformities using minimal constrained knee have been good

Deformity correction is a fundamental goal in Total Knee Arthroplasty. Severe valgus deformities often present the surgeon with a complex challenge. These deformities are associated with abnormal bone anatomy, ligament laxity and soft tissue contractures. Distorted bone anatomy is due to bone loss on the lateral femoral condyle, especially posteriorly. To a lesser extent bone loss occurs from the lateral tibia plateau. The AP Axis (Whiteside's Line) or Epicondylar axis must be used as a rotational landmark in the severely valgus knee. Gap balancing techniques can be helpful in the severely valgus knee, but good extension balance must be obtained before setting femoral rotation with this technique. Coronal alignment is generally corrected to neutral or 2 to 3 degree overcorrection to mild mechanical varus to unload the attenuated medial ligaments. The goal of soft tissue releases is to obtain rectangular flexion and extension gaps. Soft tissue releases involve the IT band, Posterolateral corner/Accurate Complex, Posterior Capsule, LCL, and Popliteus Tendon. Assessment of which structures is made and then releases are performed. In general Pie Crust release of the ITB is sufficient for mild deformity. More severe deformities require release of the Posterolateral corner/Accurate Complex and Posterior Capsule. I prefer a pie crust technique, while Ranawat has described the use of electrocautery to perform these posterior/ posterolateral releases. In most cases the LCL is not released, however, this can be released from the lateral epicondyle if necessary. Good ligament balance can be obtained in most cases, however, some cases with severe medial ligament attenuation require additional ligament constraint such as a constrained condylar implant

Aims. The aims of this study were to review the surgical technique for a combined femoral head reduction osteotomy (FHRO) and periacetabular osteotomy (PAO), and to report the short-term clinical and radiological results of a combined FHRO/PAO for the treatment of selected severe femoral head deformities. Patients and Methods. Between 2011 and 2016, six female patients were treated with a combined FHRO and PAO. The mean patient age was 13.6 years (12.6 to 15.7). Clinical data, including patient demographics and patient-reported outcome scores, were collected prospectively. Radiologicalally, hip morphology was assessed evaluating the Tönnis angle, the lateral centre to edge angle, the medial offset distance, the extrusion index, and the alpha angle. Results. The mean follow-up was 3.3 years (2 to 4.6). The modified Harris Hip Score improved by 33.0 points from 53.5 preoperatively to 83.4 postoperatively (p = 0.03). The Western Ontario McMasters University Osteoarthritic Index score improved by 30 points from 62 preoperatively to 90 postoperatively (p = 0.029). All radiological parameters showed significant improvement. There were no long-term disabilities and none of the hips required early conversion to total hip arthroplasty. Conclusion. FHRO combined with a PAO resulted in clinical and radiological improvement at short-term follow-up, suggesting it may serve as an appropriate salvage treatment option for selected young patients with severe symptomatic hip deformities

INTRODUCTION Metal-on-metal hip resurfacing (MOMHR) has recently been reintroduced as a viable treatment option for young active patients. A short femoral neck and insufficient head are common deformities following CDH, Perthes disease and SFCE. Therefore, severity of these deformities is a contraindication for MOMHR, as contact between the femoral resurfacing component and the femoral head would be inadequate and off-set insufficient. METHODS 32 patients with severe deformity of the hip were treated with Birmingham hip resurfacing and head lengthening. We used a standard acetabular component in 18 patients and a CDH acetabular component and supplementary screw fixation in 14. Bone chips produced while reaming the acetabulum were impacted on the femoral head to achieve the desired length, as evaluated on pre-op x-rays. Rehabilitation included no weight-bearing for 1 month and partial weight-bearing for another month. RESULTS Median patient age was 44 years. Median head lengthening was 1.2 cm. Minimum follow-up was 3.1 years, maximum 5.2. Mean Harris Hip Score was 98. At follow-up 82% of the patients were involved in heavy or moderately heavy work. 34% of the patients practiced sports. Co and Cr serum concentrations at 25 months were respectively ng/ml 1.76, and 0.75. DXA analysis of the proximal femur showed complete recovery of BMD in Gruen zone 1 and increased in zone 7 (p= 0.05). There were no major complications. DISCUSSION AND CONCLUSIONS The absence of major complications and the quality of our results support this technique in young active patients with severe deformity of the hip

Summary Statement. We present a simple and useful geometrical equation system to carry out the pre-operative planning and intra-operative assessments for total knee arthroplasty. These methods are extremely helpful in severely deformed lower limbs. Introduction. Total knee arthroplasty is a highly successful surgery for most of the patients with knee osteoarthritis. With commercial instruments and jigs, most surgeons can correct the deformity and provided satisfactory results. However, in cases with severe extra-articular deformity, the instruments may mislead surgeons in making judgment of the true mechanical axis. We developed a geometrical equation system for pre-operative planning and intra-operative measurement to perform correct bony cuts and achieve good post-operative axis. Patients & Methods. From 2008 to 2012, twenty-four patients with severe extra-articular deformities of low limbs underwent total knee arthroplasties for osteoarthritis. The deformities included malunion of femoral or tibial shafts with angulation, non-union of femoral supracondylar fractures, failed high tibia osteotomies, severe bowing of femurs, and other post-traumatic sequelae. The intra-medullary or extra-medullary guide devices were not possible to provide correct axis in these cases. For pre-operative planning, we analyzed the deformities on triple-film scanography and standing anterior-posterior and lateral X-ray films. The angles needed to be corrected in coronal and sagittal planes were measured. A geometrical equation system was applied to calculate the thickness of the proximal tibia cut and distal femoral cut. If the flexion contracture was presented, the degree of necessary elevation of joint line was also calculated. Intra-operatively, the degree of rotation of anterior and posterior femoral cuts was assessed after proximal tibial and distal femoral cuts. The sizes of prosthesis were judged according to the balance between flexion and extension gaps. A 3-in-1 jig was used for chamfering of the femur. After fine-tuning of bony cuts and balancing of soft tissue, the prostheses were cemented. The conventional intra-medullary and extra-medullary guiding devices were not used during the whole procedure. Results. All of the patients achieved satisfactory results in the aspect of pain relief and functional outcomes. All patients had good post-operative axis in coronal plane (varus or valgus deformity < 3 degrees). Twenty-two patients (92%) achieved good sagittal alignments (deformity < 3 degrees). The results were compatible with those in the patient population without those severe deformities. There was no major complication among these patients. Discussion/Conclusion. In this series, we present a simple and useful geometrical equation system to carry out the pre-operative planning and intra-operative assessments for total knee arthroplasty. These methods are extremely helpful in severely deformed lower limbs. Optimal post-operative alignments were achieved in this series and no major complication was found

Objectives. The approach in total knee arthroplasty (TKA) with severe valgus deformity is controversial. The lateral parapatellar approach has been proposed for several years, but surgical technique of this approach was unusual and difficult. Therefore, we have consistently been selected medial parapatellar approach (MPP) for all cases. In this study, we investigated the short term results of TKA for severe valgus deformity with MPP about clinical and radiographic assessment. Methods. Seven knees in seven cases of severe valgus knees with stand femorotibial angle (FTA) less than 160 degrees were enrolled. Osteoarthritis were 6 cases, hemophilic arthropathy was 1 case and no rheumatoid arthritis case. There were 6 female and 1 male, and mean age was 63.6 years (41–75 years). Duration of follow up ranged 3 months to 22.5 months, with mean of 10.9 months. We compared alignment on standing radiograph, range of motion (ROM), the Japanese Orthopaedic Association (the JOA) score for osteoarthritic knee pre/postoperatively, and examined post operative complication retrospectively. Results. Significant changes of the range of motion pre- and postoperation were not obtained. The mean JOA score improved 50.0 preoperatively to 76.7 postoperatively. The mean stand FTA was corrected 149 degrees preoperatively to 174 degrees postoperatively (p0.001). Postoperative complications occurred in two cases. Aseptic loosening of tibial component due to pyoderma gangrenosum was one case, and peroneal nerve palsy was another. In the former case, revision TKA with varus-valgus constrained prosthesis were performed after a year from primary surgery. In the latter case, weakness of the extensor hallucis longus muscle was fully recovered 4 months later. Conclusion. The medial parapatellar approach was beneficial for TKA of severe valgus knee over the short term

Objective. Posterior vertebral column resection (PVCR) is indicated in the management of severe rigid spine deformities. It is a complex surgical procedure and is only performed in a few spine centres due to the technical expertise required and associated risk. The purpose of this study is to review the indications, surgical challenges and outcomes of patients undergoing PVCR. Methods. 12 patients with severe spinal deformities who underwent PVCR were retrospectively reviewed after a follow-up of 2 years. Surgery was performed with the aid of motor evoked spinal cord monitoring and cellsaver when available. The average surgical duration was 310 minutes (100–490). The average blood loss was 1491 ml (0–3500). The indication for PVCR was gross deformity and myelopathy which was due to congenital spinal deformities and one case of old tuberculosis. Clinical records and the radiographic parameters were reviewed. Results. Kyphosis of an average of 72 degrees was corrected to 28 degrees. The associated scoliosis was corrected from an average of 49.2 to 21.2 degrees. Ten patients improved neurologically to ASIA D and E. One patient deteriorated markedly, required revision with no initial improvement but reached ASIA E at 6 months after surgery. Four patients had associated syringomyelia. All were re-scanned at 1 year. The three with small syrinx's demonstrated no progression on MRI and the large syrinx resolved completely. In addition to the neurological deterioration, complications included 1 right lower lobe pneumonia. Conclusion. PVCR is an effective option to correct complex rigid kyphoscoliosis. In addition it allows excellent circumferential decompression of the cord and neurological recovery. When the congenital scoliosis is associated with syringomyelia with no other cause evident, it may allow resolution of the syrinx. Key words: Posterior vertebral column resection, severe spinal deformities, myelopathy, syringomyelia. NO DISCLOSURES

Introduction: Stainsby’s procedure for correction of severe claw toe deformity is a relatively new procedure in foot and ankle surgery. The purpose of this study is to evaluate our early experience in a single institution. Method: Between 1998 and 2002 we reviewed retrospectively 17 patients who had severe claw toe deformity who had undergone Stainsby’s procedure. All patients had lesser toe involvement. The records and radiographs were reviewed and the subjective assessment by telephone interview. Results: Eleven females and six males were included. There were 21 feet and 42 toes with four bilateral feet involvement. Mean age of 56.7 years (range 40–78) and median follow-up was 28 months (range 8–48). Ten feet in nine patients undergone single lesser toe correction and 11 feet in eight patients undergone multiple toe correction were reviewed. Five patients (29.4%) with six feet suffered rheumatoid arthritis (RA); four patients (23.5%) with six feet suffered cavus deformity and the remaining eight patients (47.1%) with nine feet had isolated toe pathology. All patients were presented with shoe wear problem with 16 (94.1%) patients had pain related to callosities. Sixteen (94.1%) patients were satisfied with the results; two patients had persistent metatarsalgia. Forty (95.2%) toes had good alignment and two (4.8%) toes had recurrent asymptomatic clawing. Fifteen (88.2%) patients had unlimited daily activities. Eleven (64.7%) patients are able to have normal foot wear, four (23.5%) require insole support and two (11.8%) required soft padding only. Complications included sensory alteration in two patients who had multiple lesser toe correction and seven patients had superficial wound infection. There was no statistical difference in results related to number of toes operated on and association with RA. Conclusion: Stainsby’s procedure remains a versatile surgical technique when dealing with severe claw toe deformity. It gives very good correction with high patients’ satisfaction rate and a low complication rate. We recommend this surgical technique, as one of the armamentarium foot and ankle surgeons should acquire

Our study describes the clinical outcome of total ankle replacement (TAR) performed in patients with moderate to severe varus deformity. Between September 2004 and September 2007, 23 ankles with a varus deformity ≥ 10° and 22 with neutral alignment received a TAR. Following specific algorithms according to joint congruency, the varus ankles were managed by various additional procedures simultaneously with TAR. After a mean follow-up of 27 months (12 to 47), the varus ankles improved significantly in all clinical measures (p < 0.0001 for visual analogue scale and American Orthopaedic Foot and Ankle Society score, p = 0.001 for range of movement). No significant differences were found between the varus and neutral groups regarding the clinical (p = 0.766 for visual analogue scale, p = 0.502 for American Orthopaedic Foot and Ankle Society score, p = 0.773 for range of movement) and radiological outcome (p = 0.339 for heterotopic ossification, p = 0.544 for medial cortical reaction, p = 0.128 for posterior focal osteolysis). Failure of the TAR with conversion to an arthrodesis occurred in one case in each group. The clinical outcome of TAR performed in ankles with pre-operative varus alignment ≥ 10° is comparable with that of neutrally aligned ankles when appropriate additional procedures to correct the deformity are carried out simultaneously with TAR

In arthritic knees with severe valgus deformity Total Knee Arthroplasty (TKA) can be performed through medial or lateral parapatellar approaches. Many orthopaedic surgeons are apprehensive of using the lateral parapatellar approach due to lack of familiarity and concerns about complications related to soft tissue coverage and vascularity of the patella and the overlying skin. However surgeons who use this approach report good outcomes and no added complications. The purpose of our study was to compare outcomes following TKA performed through a medial parapatellar approach with those performed through a lateral parapatellar approach in arthritic knees with severe valgus deformity. We conducted a retrospective review of patients from two consultants using computer navigation for all their TKAs. All patients with severe valgus deformities (Ranawat 2 & 3 grades) operated on between January 2005 and December 2011 were included. 66 patients with 67 TKAs fulfilled the inclusion criteria. Patients were group by approach; Medial = 34TKAs (34 patients) or Lateral = 33 TKAs (32 patients). Details were collected from patients' records, AP hip-knee-ankle (HKA) radiographs and computer navigation files. Outcome measures included lateral release rates, post-operative range of knee movements, long leg mechanical alignment measurements, post-operative Oxford scores at six weeks and one year, patient satisfaction and any complications. Comparisons were made between groups using t-tests. The total cohort had a mean age of 69 years [42–82] and mean BMI of 29 [19–46]. The two groups had comparable pre-operative Oxford scores (Medial 41[27–56], Lateral 44 [31–60]) and pre-operative valgus deformity measured on HKA radiographs (Medial 13° [10°–27.6°], Lateral 12° [6°–22°]). Three patients in the Medial group underwent intra-operative lateral patellar release to improve patellar tracking. Seven patients in the Lateral group had a lateral condyle osteotomy for soft tissue balancing (one bilateral). There was no statistically significant difference between groups at one year follow up for maximum flexion (Medial 100° [78°–122°], Lateral 100° [85°–125°], p=0.42), fixed flexion deformity (Medial 1.2° [0°–10°], Lateral 0.9° [0°–10°], p=0.31) or Oxford score (Medial 23 [12–37], Lateral 23 [16–41], p=0.49). Similarly there was no difference in the patient satisfaction rates between the two groups at one year follow up. However there was a statistically significant difference in the mean radiographic post-operative alignment angle measurement (Medial 1.8° valgus [4° varus to 10° valgus], Lateral 0.3° valgus [5° varus to 7° valgus], p=0.02). One patient in the Medial group had a revision to hinged knee prosthesis for post-operative instability. There was no wound breakdown or patellar avascular necrosis noted in either of the groups. The lateral parapatellar approach resulted in slightly better valgus correction on radiographs taken six weeks post-operatively. We found no major complications in the Lateral parapatellar approach group. Specifically we did not encounter any difficulties in closing the deep soft tissue envelope around the knee and there were no cases of patellar avascular necrosis or skin necrosis. Hence we conclude that lateral parapatellar approach is a safe and reliable alternative to the medial parapatellar approach for correction of severe valgus deformity in TKA

Study design: Retrospective study. Objectives: To determine whether apical vertebrectomy for correction of severe spinal deformity in patients with cerebral palsy or mental retardation significantly improves curve correction and to study complications of such a procedure. Summary of Background data: Although a combined anterior-posterior procedure for correction of severe deformity in cerebral palsy patients is well established, apical vertebrectomy to improve correction has not been described. Subjects: 5 patients (2M, 3F) operated on between 2000–2003 (anterior apical vertebrectomy followed by posterior instrumented fusion), mean age 14 years, average follow-up 1.5 years. All had group II (Lonstein & Akbarnia) rigid (mean 96degrees bending to 83degrees) thoracolumbar/lumbar curves with marked pelvic obliquity. Results: Preoperative mean Cobb angle of 96 degrees corrected to 36 degrees, (63% correction, and 57% correction over and above the bending Cobb angle), 42 degrees at final follow-up. Mean apical vertebral translation (AVT) correction was 57 % (86mm to 37mm) and regional AVT correction 53%. Pelvic tilt correction was 72% (29degrees to 9degrees). Thoracic kyphosis remained unchanged but lumbar lordosis of 4.2 degrees (range−66 to +68) was corrected to 63 degrees. Mean blood loss was 1100mls (range 300–3000) for anterior surgery and 3400mls for posterior surgery. Operative time was 3 hours for anterior surgery. There were no intra-operative or post-operative complications (infection, pseudarthrosis, metalwork failure). Subjective outcome was excellent in all patients. Conclusion: In patients with rigid, rotated curves with wide apical translation, apical vertebrectomy and posterior instrumented fusion can achieve significant correction of Cobb angle over and above the bending cobb angle and also the AVT and pelvic tilt leading to high parent / caregiver satisfaction and improvement in functional status of the patient

We treated 47 patients with a mean age of 57 years (22 to 88) who had a proximal humeral fracture in which there was a severe varus deformity, using a standard operative protocol of anatomical reduction, fixation with a locking plate and supplementation by structural allografts in unstable fractures. The functional and radiological outcomes were reviewed. At two years after operation the median Constant score was 86 points and the median Disabilities of the Arm, Shoulder and Hand score 17 points. Seven of the patients underwent further surgery, two for failure of fixation, three for dysfunction of the rotator cuff, and two for shoulder stiffness. The two cases of failure of fixation were attributable to violation of the operative protocol. In the 46 patients who retained their humeral head, all the fractures healed within the first year, with no sign of collapse or narrowing of the joint space. Longer follow-up will be required to confirm whether these initially satisfactory results are maintained

Valgus knee deformity can present a number of unique surgical challenges for the total knee arthroplasty (TKA) surgeon. Understanding the typical patterns of bone and soft-tissue pathology in the valgus arthritic knee is critical for appropriate surgical planning. This review aims to provide the knee arthroplasty surgeon with an understanding of surgical management strategies for the treatment of valgus knee arthritis.

Lateral femoral and tibial deficiencies, contracted lateral soft tissues, attenuated medial soft tissues, and multiplanar deformities may all be present in the valgus arthritic knee. A number of classifications have been reported in order to guide surgical management, and a variety of surgical strategies have been described with satisfactory clinical results. Depending on the severity of the deformity, a variety of TKA implant designs may be appropriate for use.

Regardless of an operating surgeon’s preferred surgical strategy, adherence to a step-wise approach to deformity correction is advised.

Cite this article: Bone Joint J 2017;99-B(1 Supple A):60–4.

We have used the Ilizarov technique for severe flexion deformity of the knee in 11 patients (13 knees) between 1986 and 1994 and have followed them up for an average of 4.1 years. The age of the patients at operation ranged from 1.7 to 18.8 years. The femoral and tibial components were connected by two anterior hinges, medial and lateral, and two posterior distraction rods. The deformity was corrected to a femorotibial lateral shaft angle of less than 20°. A permanent orthosis was applied after removal of the fixator. Fractures occurred in four patients and paralysis of the common peroneal nerve in another. There was a recurrence of the deformity in four patients. At the last review all patients were able to walk on their operated leg with or without an orthosis. We have found the Ilizarov method to be helpful in correcting severe fixed flexion deformity of the knee, with relatively few complications, but the basic principles of the method must be carefully followed

Background and Purpose of Study. The Valgus knee in total knee Arthroplasty, is considered a more demanding procedure, often with ligament balance a greater challenge than seen with neutral or Varus knees. It has also frequently been suggested that prostheses with higher levels of constraint be used to avoid late-onset instability. Various lateral release techniques have also been suggested in the literature. This study is aimed at assessing the outcomes of an unconstrained, rotating platform designed prosthesis, the LCS, using our technique, in the management of severe valgus deformity. Methods. 44 knees in 42 patients with a pre-operative valgus deformity of more than 10 degrees were included in our retrospective series. We analyzed the radiographs for the degree of correction, the angle of tibial tray implantation, and femoral implantation angle, tibial slope, as well as the presence (or degree) of lift off and any complications were noted. In this group, 7 had a Valgus deformity of greater than 25 degrees, with a mean Valgus deformity of 17,36 degrees. The mean age at operation was 65. Clinical and radiological analysis was done Pre-hospital discharge and again post-operatively 6 weeks. Results. The mean coronal alignment was corrected from 17,36 degrees to 5 degrees of Valgus post operatively. 2 knees were corrected past neutral to varus alignment. There was 1 case of bearing spin out experienced early on in the series. The mean tibial implant angle was 1,7 degrees from neutral. Lift off in the early post-operative X-rays was seen in 6 patients, however at 3 month follow up the knees appeared to be well balanced. There were no infections or revisions for wear, one re-operation for bearing dislocation, and no cases of loosening in our series. There were no cases of delayed instability. Patient satisfaction was 86 %. Conclusions. The rotating platform, mobile bearing prosthesis, using our technique, provided a reproducible correction of deformity in Valgus knees, a well-balanced knee, a low complication rate, and an excellent degree of patient satisfaction. NO DISCLOSURES

Valgus deformity is less common than varus. There is an associated bone deformity in many cases – dysplasia of the lateral femoral condyle. There are also soft tissue deformities, including tightness of the lateral soft tissues, and stretching of those on the medial side.

Unlike varus, where the bone deformity is primarily tibial, in valgus knees it is most often femoral. There is both a distal and a posterior hypoplasia of the lateral femoral condyle. This results in a sloping joint line, and failure to correct this results in valgus malalignment. Posterior lateral bone loss also results in accidental internal rotation of the femoral component, which affects patellar tracking. Using the trans-epicondylar axis and Whiteside's line helps to position the femoral component in the correct rotation.

Soft tissue balancing is more complex in the valgus knee. Releases are performed sequentially, depending on the particular combination of deformities. It is important to note whether the knee is tight in flexion, in extension, or both. Tightness in extension is the most common, and is corrected by release of the iliotibial band. Tightness in flexion as well as extension requires that the lateral collateral ligament +/− the popliteus tendon be released.

Cruciate substituting designs are helpful in many cases, and in extreme deformity with medial stretching, a constrained or “total stabilised” design is needed. Patellar maltracking is common, and a lateral retinacular release may be needed. Beware of over-releasing the posterolateral corner, as excessive release may cause marked instability. Use the pie-crust technique of Insall.

We present the case of an 83-year-old man who developed quadriparesis and respiratory embarrassment following osteomyelitis at the occipito-atlantoaxial junction. He had developed an abscess at this site after an earlier urinary infection with methicillin-resistant staphylococcus aureus. Stabilisation of the neck and antibiotic therapy led to an almost complete neurological recovery without recourse to anterior surgery.

We describe a retrospective review of the clinical and radiological parameters of 32 feet in 30 patients (10 men and 20 women) who underwent correction for malalignment of the hindfoot with a modified double arthrodesis through a medial approach. The mean follow-up was 21 months (13 to 37). Fusion was achieved in all feet at a mean of 13 weeks (6 to 30). Apart from the calcaneal pitch angle, all angular measurements improved significantly after surgery. Primary wound healing occurred without complications.

The isolated medial approach to the subtalar and talonavicular joints allows good visualisation which facilitated the reduction and positioning of the joints. It was also associated with fewer problems with wound healing than the standard lateral approach.

1. Further consideration has been given to the lateral rotation which occurs at the ankle joint in uncorrected club feet.

2. Medial rotation osteotomy of the tibia may be used to restore more normal alignment to the hind foot at the expense of an increase in varus of the forefoot, which must be corrected at a second operation.

3. The early results in seven feet treated in this manner are reported.

4. We hope that this paper will be regarded more as a contribution to the understanding of the anatomy of uncorrected club foot than as advocacy of a new method of surgical treatment.

Until recently the accepted treatment of choice for severe type-II fibular hemimelia has been Syme’s or Boyd’s amputation. The alternative of distraction lengthening using the Ilizarov technique is now available.

We report three patients (four limbs) with type-II fibular hemimelia who were treated by the Ilizarov technique and followed up for two to six years. Severe progressive procurvatum and valgus deformity of the tibia and valgus deformity and lateral subluxation of the ankle were found in all four limbs. Multiple additional soft-tissue and bony surgery was necessary. In view of these problems we feel that reappraisal of the indications for lengthening in type-II fibular hemimelia is necessary.

Aims: To study functional outcome and survivorship of custom designed knee implants for primary and revision TKR where off-the-shelf prostheses were unsuitable. Methods: Clinical and radiological results of twenty-three custom-designed total knee prosthesis in twenty patients were prospectively reviewed. The indications were bone loss following multiple revisions of total knee prosthesis and debridement for infection, periprosthetic fractures, bone deformity with rickets and small bones with juvenile chronic arthritis. All implants designed and manufactured at Centre for Biomedical Engineering, Stanmore, U.K. Four different designs of knee prosthesis used: Condylar knee of miniature size, CAD-CAM knee, Superstabiliser and Rotating Hinges. Hospital for Special Surgery (HSS) score taken preoperatively, at 3 months, and yearly by an independent research physiotherapist. Duration of follow up: 62.5 months (28–126 months) Results: Average HSS score improved from 13.5 points (range 0–48) pre-operatively to 86.5 points postoperatively (range 62–96) (p=0.025). Average maximum flexion post operatively: 86.4° (range 60°–122°). Sixteen knees had excellent, five good and two poor results. Extension lag of 15°–25° in three patients. One patient with juvenile chronic arthritis needed revision at five years after index arthroplasty. Conclusions: Clinical and radiological results for custom designed prostheses compare favourably with standard knee prosthesis for similar indications. Our results support the use of a custom designed knee implant as salvage prosthesis and also as an alternative to arthrodesis or amputation.

Flexion Deformity of knee is the most common deformity in post polio residual deformity. Wilson's release, supracondylar osteotomy etc have been described for its treatment. We present our result of fractional hamstring lengthening followed by gradual distraction using threaded rod in hollow tube to treat flexion deformity of knee. This retrospective study included 150 cases (80 males and 70 females) with the mean of 15 years (8-22yrs). The mean duration of deformity was 6 years (2 – 14yrs) with mean follow up 0f 3 years. The mean preoperative flexion deformity was 45degree (110 – 30 degree) with a mean pre operative further flexion of 110 degree (130 – 90) .20 cases were had a crawling gait and 10 cases were wheel chair bound. Flexion got corrected to 0 degree in 110 cases (P value <0.01). Post operative mean arc of motion was 80degree We had 10 cases who could not tolerate plaster and hence were put on traction . 20 cases had knee stiffness on removal of plaster which could not improve on physiotherapy. 10 cases had superficial infection cured with dressings.

Our findings indicate that this method is very effective in the treatment of flexion deformity of knee with complication of knee stiffness in older cases

Introduction. Severe, multiplanar, fixed, pantalar deformities present a challenge to orthopaedic surgeons. Surgical options include limb salvage or amputation. This study compares outcomes of patients with such deformities undergoing limb preservation with either pantalar fusion (PTF) or talectomy and tibiocalcaneal fusion (TCF), versus below knee amputation (BKA). Methods. Fifty-one patients undergoing either PTF, TCF and BKA for failed management of severe pantalar deformity were evaluated retrospectively. Twenty-seven patients underwent PTF, 8 TCF and 16 BKA. Median age at surgery was 55.0 years (17 to 72 years) and median follow-up duration was 49.9 months (18.0 to 253.7 months). Patients with chronic regional pain syndrome, tumour, acute trauma or diabetic Charcot arthropathy were excluded. Clinical evaluation was undertaken using the MOxFQ, EQ-5D and Special Interest Group in Amputee Medicine score (SIGAM). Patients were also asked whether they were satisfied with their surgical outcome and whether they would have the same surgery again. Results. There was no statistically significant difference in patient reported outcomes, satisfaction, or complication profile between the groups. Twenty-two patients undergoing PTF (81.5%), 6 patients undergoing TCF (75%), and 15 patients undergoing BKA (93.8%) were satisfied overall (p=0.414). Similarly, there was no difference in the proportion of patients who would opt for the same procedure again (p=0.142): 23 in the PTF group (85.2%), 8 in the TCF group (100%), and 11 in the BKA group (68.8%). Seven patients undergoing PTF (25.9%), 2 patients undergoing TCF (25%) and 6 patients undergoing BKA (37.5%) had major complications (p=0.692). Conclusion. This study has shown that PTF, TCF and BKA can all provide an acceptable outcome in treatment of severe, degenerative deformities of the lower extremity. Therefore, surgical decisions must be based on individual patient considerations. This data may also be useful in counselling patients when considering limb salvage versus amputation for severe deformity

Aims. The aim of this study was to inform the epidemiology and treatment of slipped capital femoral epiphysis (SCFE). Methods. This was an anonymized comprehensive cohort study, with a nested consented cohort, following the the Idea, Development, Exploration, Assessment, Long-term study (IDEAL) framework. A total of 143 of 144 hospitals treating SCFE in Great Britain participated over an 18-month period. Patients were cross-checked against national administrative data and potential missing patients were identified. Clinician-reported outcomes were collected until two years. Patient-reported outcome measures (PROMs) were collected for a subset of participants. Results. A total of 486 children (513 hips) were newly affected, with a median of two patients (interquartile range 0 to 4) per hospital. The annual incidence was 3.34 (95% confidence interval (CI) 3.01 to 3.67) per 100,000 six- to 18-year-olds. Time to diagnosis in stable disease was increased in severe deformity. There was considerable variation in surgical strategy among those unable to walk at diagnosis (66 urgent surgery vs 43 surgery after interval delay), those with severe radiological deformity (34 fixation with deformity correction vs 36 without correction) and those with unaffected opposite hips (120 prophylactic fixation vs 286 no fixation). Independent risk factors for avascular necrosis (AVN) were the inability of the child to walk at presentation to hospital (adjusted odds ratio (aOR) 4.4 (95% CI 1.7 to 11.4)) and surgical technique of open reduction and internal fixation (aOR 7.5 (95% CI 2.4 to 23.2)). Overall, 33 unaffected untreated opposite hips (11.5%) were treated for SCFE by two-year follow-up. Age was the only independent risk factor for contralateral SCFE, with age under 12.5 years the optimal cut-off to define ‘at risk’. Of hips treated with prophylactic fixation, none had SCFE, though complications included femoral fracture, AVN, and revision surgery. PROMs demonstrated the marked impact on quality of life on the child because of SCFE. Conclusion. The experience of individual hospitals is limited and mechanisms to consolidate learning may enhance care. Diagnostic delays were common and radiological severity worsened with increasing time to diagnosis. There was unexplained variation in treatment, some of which exposes children to significant risks that should be evaluated through randomized controlled trials. Cite this article: Bone Joint J 2022;104-B(4):519–528

The computational modelling and 3D technology are finding more and more applications in the medical field. Orthopedic surgery is one of the specialties that can benefit the most from this solution. Three case reports drawn from the experience of the authors’ Orthopedic Clinic are illustraded to highlight the benefits of applying this technology. Drawing on the extensive experience gained within the authors’ Operating Unit, three cases regarding different body segments have been selected to prove the importance of 3D technology in preoperative planning and during the surgery. A sternal transplant by allograft from a cryopreserved cadaver, the realization of a custom made implant of the glenoid component in a two-stage revision of a reverse shoulder arthroplasty, and a case of revision on a hip prosthesis with acetabular bone loss (Paprosky 3B) treated with custom system. In all cases the surgery was planned using 3D processing software and models of the affected bone segments, printed by 3D printer, and based on CT scans of the patients. The surgical implant was managed with dedicated instruments. The use of 3D technology can improve the results of orthopedic surgery in many ways: by optimizing the outcomes of the operation as it allows a preliminary study of the bone loss and an evalutation of feasibility of the surgery, it improves the precision of the positioning of the implant, especially in the context of severe deformity and bone loss, and it reduces the operating time; by improving surgeon training; by increasing patient involvement in decision making and informed consent. 3D technology, by offering targeted and customized solutions, is a valid tool to obtain the tailored care that every patient needs and deserves, also providing the surgeon with an important help in cases of great complexity

Children with osteogenesis imperfecta (OI) frequently present with coxa vara (CV). Skeletal fragility, severe deformity and limited fixation options make this a challenging condition to correct surgically. Our study aimed to determine the efficacy of the Fassier technique to correct CV and determine the complication rate. Retrospective, descriptive case series from a tertiary hospital. We retrospectively reviewed records of a cohort of eight children (four females, 12 hips) with OI (6/8 Sillence type III, 2/8 type IV) who had surgical treatment with Fassier technique for CV between 2014 and 2020. Inclusion Criteria: All patients with CV secondary to OI treated surgically with Fassier technique. Exclusion Criteria: Patients older than 18 years; Patients with CV treated non-operatively or by surgical technique different to Fassier technique. Data relating to the following parameters was collected and analyzed: demographic data, pre- and postoperative neck shaft angle (NSA), complications and NSA at final follow-up. The mean age at operation was 5.8 years (range 2–10). The mean NSA was corrected from 96.8° preoperatively to 137º postoperatively. At a mean follow-up of 38.6 months, the mean NSA was maintained at 133°, and 83% (10/12) of hips had an NSA that remained greater than 120°. There was a 42% (5/12) complication rate: three Fassier–Duval rods failed to expand after distal epiphyseal fixation was lost during growth; one Rush rod migrated through the lateral proximal femur cortex with recurrent coxa vara; and one Rush rod migrated proximally and required rod revision. The Fassier technique effectively corrected CV in children with moderate and progressively deforming OI. The deformity correction was maintained in the short term. The complication rate was high, but mainly related to the failed expansion of the Fassier–Duval rods

Introduction. Circular frames for ankle fusion are usually reserved for complex clinical scenarios. Current literature is heterogenous and difficult to interpret. We aimed to study the indications and outcomes of this procedure in detail. Materials & Methods. A retrospective cohort study was performed based on a prospective database of frame surgeries performed in a tertiary institution. Inclusion criteria were patients undergoing complex ankle fusion with circular frames between 2005 and 2020, with a minimum 12-month follow up. Data were collected on patient demographics, surgical indications, comorbidities, surgical procedures, external fixator time (EFT), length of stay (LOS), radiological and clinical outcomes, and adverse events. Factors influencing radiological and clinical outcomes were analysed. Results. 47 patients were included, with a mean follow-up of three years. The mean age at time of surgery was 63.6 years. Patients had a median of two previous surgeries. The median LOS was 8.5 days, and median EFT was 237 days. Where simultaneous limb lengthening was performed, the average lengthening was 2.9cm, increasing the EFT by an average of 4 months. Primary and final union rates were 91.5% and 95.7% respectively. At last follow-up, ASAMI bone scores were excellent or good in 87.2%. ASAMI functional scores were good in 79.1%. Patient satisfaction was 83.7%. 97.7% of patients experienced adverse events, most commonly pin-site related, with major complications in 30.2% and re-operations in 60.5%. There were 3 amputations. Adverse events were associated with increased age, poor soft tissue condition, severe deformities, subtalar fusions, peripheral neuropathy, peripheral vascular disease, and prolonged EFT. Conclusions. Complex ankle fusion using circular frames can achieve good outcomes in complicated clinical scenarios, however patients can expect a prolonged time in the frame and high rates of adverse events. Multiple risk factors were identified for poorer outcomes, which should be considered in patient counselling and prognostication

Background. The complex deformities in cavovarus feet may be difficult to assess and understand. Weight-bearing CT (WBCT) is increasingly used to evaluate complex deformities. However, the bone axes may be difficult to calculate in the setting of severe deformity. Computer-assisted 3D-axis calculation is a novel approach that may allow for more accurate assessment of foot alignment / deformity. The aim of this study was to assess differences in measurements done manually on 2D slices of WBCT versus 3D computer models in normal and cavus feet. Methods. We retrospectively analyzed WBCT scans from 16 normal and 16 cavus feet in patients with Charcot-Marie Tooth. Eight measurements were assessed: Talus-1. st. metatarsal angle (axial plane), Forefoot arch angle (coronal plane), and Meary's angle, calcaneal pitch, cuneiform to floor, cuneiform to skin, navicular to floor and navicular to skin distance (sagittal plane). 2D measurements were performed manually and 3D measurements were performed using specialised software (BoneLogic, DISIOR). Results. There was no significant difference in the measured variables (2D manual versus 3D automated) in normal feet. In the cavus group, 3D assessment calculated increased values for the sagittal angles: Meary's 7.3 degrees greater (p = 0.004), calcaneal pitch 2.4 degrees greater (p = 0.011)), and lower values for the axial talus-1. st. MT angle, 10.6 degrees less (p = 0.001). Conclusion. There were no significant differences in the normal group. This suggests 3D automated techniques can reliably assess the alignment of bony axes. However, the 3D axis calculations suggest there may be greater sagittal and lesser axial deformity in cavus feet than measured by 2D techniques. This discrepancy may be on account of the rotation seen in cavovarus feet, which may not be readily assessed manually. 3D automated measurements may therefore have a role in better assessing and classifying the cavus foot which may ultimately help inform treatment algorithms

Constrained implants with intra-medullary fixation are expedient for complex TKA. Constraint is associated with loosening, but can correction of deformity mitigate risk of loosening?. Primary TKA's with a non-linked constrained prosthesis from 2010-2018 were identified. Indications were ligamentous instability or intra-medullary fixation to bypass stress risers. All included fully cemented 30mm stem extensions on tibia and femur. If soft tissue stability was achieved, a posterior stabilized (PS) tibial insert was selected. Pre and post TKA full length radiographs showed. i. hip-knee-ankle angles (HKAA). ii. Kennedy Zone (KZ) where hip to ankle vector crosses knee joint. 77 TKA's in 68 patients, average age 69.3 years (41-89.5) with OA (65%) post-trauma (24.5%) and inflammatory arthropathy (10.5%). Pre-op radiographs (62 knees) showed varus in 37.0%. (HKAA: 4. o. -29. o. ), valgus in 59.6% (HKAA range 8. o. -41. o. ) and 2 knees in neutral. 13 cases deceased within 2 years were excluded. Six with 2 year follow up pending have not been revised. Mean follow-up is 6.1 yrs (2.4-11.9yrs). Long post-op radiographs showed 34 (57.6%) in central KZ (HKKA 180. o. +/- 2. o. ). . Thirteen (22.0%) were in mechanical varus (HKAA 3. o. -15. o. ) and 12 (20.3%) in mechanical valgus: HKAA (171. o. -178. o. ). Three failed with infection; 2 after ORIF and one with BMI>50. The greatest post op varus suffered peri-prosthetic fracture. There was no aseptic loosening or instability. Only full-length radiographs accurately measure alignment and very few similar studies exist. No cases failed by loosening or instability, but PPF followed persistent malalignment. Infection complicated prior ORIF and elevated BMI. This does not endorse indiscriminate use of mechanically constrained knee prostheses. Lower demand patients with complex arthropathy, especially severe deformity, benefit from fully cemented, non-linked constrained prostheses, with intra-medullary fixation. Hinges are not necessarily indicated, and rotational constraint does not lead to loosening

Introduction. Hip arthrodiastasis for paediatric hip conditions such as Perthes disease is growing in popularity. Intended merits include halting the collapse of the femoral head and maintaining sphericity by minimising the joint reaction force. This can also be applied to protecting hip reconstruction following treatment of hip dysplasia. Our aim was to assess functional outcomes and complications in a cohort of paediatric patients. Materials and Methods. A retrospective single-surgeon cohort study was performed in a University teaching hospital from 2018–2021. Follow-up was performed via telephone interview and review of patient records. Complications, time in frame and functional scores using the WOMAC hip score were recorded. Results. Following review, 26 procedures were identified in 24 patients. Indications included 16 cases of Perthes disease, 4 following slipper upper femoral epiphysis, 3 avascular necrosis, and single cases following infection, dysplasia and a bone cyst. Pre-treatment WOMAC scores averaged 53.9, improving to 88.5 post-removal. Pin site infections were encountered in 11 patients, all treated with oral antibiotics. Two patients required early removal of frame due to pin loosening. Average time in frame was 3.9 months. Conclusions. This series displays how hip arthrodiastasis can be used to manage paediatric hip conditions. Complex reconstructions may be required in patients with severe deformity following perthes disease, DDH or SUFE. The use of arthrodiastasis in these patients aims to protect the reconstruction and potentially improve outcomes. A dedicated team of specialist nurses, physiotherapists and psychologists are crucial to the treatment program

Aims. The aim of this study was to compare outcomes after growth-friendly treatment for early-onset scoliosis (EOS) between patients with skeletal dysplasias versus those with other syndromes. Methods. We retrospectively identified 20 patients with skeletal dysplasias and 292 with other syndromes (control group) who had completed surgical growth-friendly EOS treatment between 1 January 2000 and 31 December 2018. We compared radiological parameters, complications, and health-related quality of life (HRQoL) at mean follow-up of 8.6 years (SD 3.3) in the dysplasia group and 6.6 years (SD 2.6) in the control group. Results. Mean major curve correction per patient did not differ significantly between the dysplasia group (43%) and the control group (28%; p = 0.087). Mean annual spinal height increase was less in the dysplasia group (9.3 mm (SD 5.1) than in the control group (16 mm (SD 9.2); p < 0.001). Mean annual spinal growth adjusted to patient preoperative standing height during the distraction period was 11% in the dysplasia group and 14% in the control group (p = 0.070). The complication rate was 1.6 times higher (95% confidence interval (CI) 1.3 to 2.0) in the dysplasia group. The following complications were more frequent in the dysplasia group: neurological injury (rate ratio (RR) 5.1 (95% CI 2.3 to 11)), deep surgical site infection (RR 2.2 (95% CI 1.2 to 4.1)), implant-related complications (RR 2.0 (95% CI 1.5 to 2.7)), and unplanned revision (RR 1.8 (95% CI 1.3 to 2.5)). Final fusion did not provide additional spinal height compared with watchful waiting (p = 0.054). There were no significant differences in HRQoL scores between the groups. Conclusion. After growth-friendly EOS treatment, patients with skeletal dysplasias experienced a higher incidence of complications compared to those with other syndromes. Surgical growth-friendly treatment for skeletal dysplasia-associated EOS should be reserved for patients with severe, progressive deformities that are refractory to nonoperative treatment. Cite this article: Bone Joint J 2024;106-B(6):596–602

It is unusual to require the use of a total knee implant with more constraint than a posterior-stabilised post in primary knee arthroplasty. The most common indication is a knee with a severe deformity, usually fixed valgus with an incompetent medial collateral ligament, and an inability to correctly balance the knee in both flexion and extension. The pre-operative deformity is usually greater than 15–20 degrees fixed valgus and may be associated with a severe flexion contracture. This is usually seen in an elderly female patient with advanced osteoarthritis. Those pre-operative diagnoses more likely to require a constrained design include advanced rheumatoid arthritis, true neuropathic joint, and the “Charcot-like” joint due to bone loss or crystalline arthritis. Rarely, patients with periarticular knee Paget's disease of bone may require more constraint following correction of a severe deformity through the knee joint. Beware those patients with a staple or screw at the medial epicondyle or those with severe heterotopic ossification at the medial joint line, as this may signify a serious prior injury to the medial collateral ligament. Finally, there is a possibility of inadvertent division of the medial collateral ligament intra-operatively. Although this situation may be treated with suture repair and bracing, my choice is to switch to more constraint and early unbraced motion. There are over 20 designs of varus-valgus constrained components, with a variety of tibial post designs with specific rotary and angular biomechanics, and many have the option of adding modular stems. Our experience with constrained, non-linked designs has been favorable with both the use of nonmodular and modular stem extensions. Longer-term survival analysis has shown a 96% survival at 10 years with these constrained components. However, the older designs frequently required a lateral retinacular release for proper patella tracking, and there were patella complications (fracture and osteonecrosis) in 16%. With a more modern design, over the past 12 years, the need for a lateral retinacular release and patella complications have been notably decreased. Varus-valgus constrained components have a small but important role in primary total knee arthroplasty for patients with severe deformity or an incompetent medial collateral ligament

Despite multiple published reviews, the optimum method of correction and stabilisation of Blount's disease remains controversial. The purpose of this study is to evaluate the clinical and radiological outcomes of acute correction of late-onset tibial vara by percutaneous proximal tibial osteotomy with circular external fixation using two simple rings. This technique was developed to minimise cost in a context of limited resources. This study was conducted between 2016 and 2020. We retrospectively reviewed the clinical notes and radiographs of 30 patients (32tibiae) who had correction of late-onset tibia by proximal tibial osteotomy and Ilizarov external fixator. All cases were followed up to 2 years. The mean proximal tibial angle was 65.7° (±7.8) preoperatively and 89.8° (±1.7) postoperatively. The mean mechanical axis deviation improved from 56.2 (±8.3) preoperatively to 2.8 (±1.6) mm postoperatively. The mean femoral-tibial shaft angle was changed from – 34.3° (±6.7) preoperatively to 5.7° (±2.8) after correction. Complications included overcorrection (9%) and pin tract infection (25%). At final follow up, all patients had full knee range of motion and normal function. All cases progressed to union and there were no cases of recurrence of deformity. This simple procedure provides secure fixation allowing early weight bearing and early return to function. It can be used in the context of health care systems with limited resources. It has a relatively low complication rate. Our results suggest that acute correction and simple circular frame fixation is an excellent treatment choice for cases of late-onset tibia vara, especially in severe deformities

The periacetabular osteotomy (PAO) is a well-described procedure for symptomatic acetabular dysplasia. For severe acetabular deformities, the efficacy of acetabular reorientation remains controversial and the literature on mid to long-term outcomes is limited. The purpose of this study was to analyze average 10-year clinical and radiographic results of the PAO for severe acetabular dysplasia. We retrospectively analyzed a consecutive series of patients undergoing PAO for severe acetabular dysplasia as defined by LCEA < 5˚. Patient demographics, radiographic measurements, modified Harris Hip score (MHHS), UCLA activity, SF-12, and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) were assessed. Sixty-eight patients (82 hips; 54 females) with an average age 20.7 and BMI of 24.4 kg/m2 were included. Mean follow-up was follow up was 10.3 years. . The LCEA and ACEA improved a mean of 32.8˚ (8.4˚ to 24.4˚, p<0.0001) and 31.6˚ (−4.9˚ to 26.7˚, p< 0.0001), respectively. MHHS improved an average of 17.5 points (64.6 to 82.3, p<0.0001), WOMAC Pain subscore improved an average of 21.1 points (65.7 to 85.0, p = 0.004), and SF-12 physical improved 11.8 points (from 40.3 to 50.6, p = 0.006). Activity improved as indicated by a 1.5-point increase in the UCLA Activity score (6.4 to 7.9, p=0.005). Six hips (9.1%) converted to THA at average 6.8 years post-PAO. Kaplan-Meier survival analysis with THA as the endpoint was 92% at 15 years (95% confidence interval [CI] (81%–96%). Multivariable linear regression analysis revealed concurrent osteochondroplasty was associated with a decreased risk of PAO failure. PAO is an effective treatment for severe acetabular dysplasia. At average 10.3 years, clinical and radiographic outcomes demonstrate pain relief, improved hip function, and major deformity correction. We observed minimal clinical deterioration over time

Paediatric musculoskeletal (MSK) disorders often produce severe limb deformities, that may require surgical correction. This may be challenging, especially in case of multiplanar, multifocal and/or multilevel deformities. The increasing implementation of novel technologies, such as virtual surgical planning (VSP), computer aided surgical simulation (CASS) and 3D-printing is rapidly gaining traction for a range of surgical applications in paediatric orthopaedics, allowing for extreme personalization and accuracy of the correction, by also reducing operative times and complications. However, prompt availability and accessible costs of this technology remain a concern. Here, we report our experience using an in-hospital low-cost desk workstation for VSP and rapid prototyping in the field of paediatric orthopaedic surgery. From April 2018 to September 2022 20 children presenting with congenital or post-traumatic deformities of the limbs requiring corrective osteotomies were included in the study. A conversion procedure was applied to transform the CT scan into a 3D model. The surgery was planned using the 3D generated model. The simulation consisted of a virtual process of correction of the alignment, rotation, lengthening of the bones and choosing the level, shape and direction of the osteotomies. We also simulated and calculated the size and position of hardware and customized massive allografts that were shaped in clean room at the hospital bone bank. Sterilizable 3D models and PSI were printed in high-temperature poly-lactic acid (HTPLA), using a low-cost 3D-printer. Twenty-three operations in twenty patients were performed by using VSP and CASS. The sites of correction were: leg (9 cases) hip (5 cases) elbow/forearm (5 cases) foot (5 cases) The 3D printed sterilizable models were used in 21 cases while HTPLA-PSI were used in five cases. customized massive bone allografts were implanted in 4 cases. No complications related to the use of 3D printed models or cutting guides within the surgical field were observed. Post-operative good or excellent radiographic correction was achieved in 21 cases. In conclusion, the application of VSP, CASS and 3D-printing technology can improve the surgical correction of complex limb deformities in children, helping the surgeon to identify the correct landmarks for the osteotomy, to achieve the desired degree of correction, accurately modelling and positioning hardware and bone grafts when required. The implementation of in-hospital low-cost desk workstations for VSP, CASS and 3D-Printing is an effective and cost-advantageous solution for facilitating the use of these technologies in daily clinical and surgical practice

We reviewed 91 patients (103 feet) who underwent a Ludloff osteotomy combined with additional procedures. According to the combined procedures performed, patients were divided into Group I (31 feet; first web space release), Group II (35 feet; Akin osteotomy and trans-articular release), or Group III (37 feet; Akin osteotomy, supplementary axial Kirschner (K-) wire fixation, and trans-articular release). Each group was then further subdivided into severe and moderate deformities. The mean hallux valgus angle correction of Group II was significantly greater than that of Group I (p = 0.001). The mean intermetatarsal angle correction of Group III was significantly greater than that of Group II (p < 0.001). In severe deformities, post-operative incongruity of the first metatarsophalangeal joint was least common in Group I (p = 0.026). Akin osteotomy significantly increased correction of the hallux valgus angle, while a supplementary K-wire significantly reduced the later loss of intermetatarsal angle correction. First web space release can be recommended for severe deformity. Additionally, K-wire fixation (odds ratio (OR) 5.05 (95% confidence interval (CI) 1.21 to 24.39); p = 0.032) and the pre-operative hallux valgus angle (OR 2.20 (95% CI 1.11 to 4.73); p = 0.001) were shown to be factors affecting recurrence of hallux valgus after Ludloff osteotomy. Cite this article: Bone Joint J 2013;95-B:803–8

Unstable chest wall injuries have high rates of mortality and morbidity. These injuries can lead to respiratory dysfunction, and are associated with high rates of pneumonia, sepsis, prolonged ICU stays, and increased health care costs. Numerous studies have demonstrated improved outcomes with surgical fixation compared to non-operative treatment. However, an adequately powered multi-centre randomized controlled study using modern fixation techniques has been lacking. We present a multi-centred, prospective, randomized controlled trial comparing surgical fixation of acute, unstable chest wall injuries with the current standard of non-operative management. Patients aged 16–85 with a flail chest (3 or more consecutive, segmental, displaced rib fractures), or severe deformity of the chest wall, were recruited from multiple trauma centers across North America. Exclusion criteria included: severe pulmonary contusion, severe head trauma, randomization>72 hours from injury, inability to perform surgical fixation within 96 hours from injury (in those randomized to surgery), fractures of the floating ribs, or fractures adjacent to the spine not amendable to surgical fixation. Patients were seen in follow-up for one year. The primary outcome was days free from mechanical ventilation in the first 28 days following injury. Secondary outcomes were days in ICU, rates of pneumonia, sepsis, need for tracheostomy, mortality, general health outcomes, pulmonary function testing, and other complications of treatment. A sample size of 206 was required to detect a difference of 2 ventilator-free days between the two groups, using a 2-tailed alpha error of 0.05 and a power of 0.80. A total of 207 patients were recruited from 15 sites across Canada and USA, from 2011–2018. Ninety-nine patients were randomized to non-operative treatment, and 108 were randomized to surgical fixation. Overall, the mean age was 53 years, and 75% of patients were male, with 25% females. The commonest mechanisms of injury were: motor vehicle collisions (34%), falls (20%), motorcycle collisions (14%), and pedestrian injuries (11%). The mean injury severity score (ISS) at admission was 26, and patients had a mean of 10 rib fractures. Eighty-nine percent of patients had pneumothorax, 76% had haemothorax, and 54% had pulmonary contusion. There were no differences between the two groups in terms of demographics. The final results will be available and presented at the COA meeting in Halifax. This is the largest randomized controlled trial to date, comparing surgical fixation to non-operative treatment of unstable chest wall and flail chest injuries. The results of this study will shed light on the best treatment options for patients with such injuries, help understand outcomes, and guide treatment. The final results will be available and presented at the COA meeting in Halifax

Among the advanced technology developed and tested for orthopaedic surgery, the Rizzoli (IOR) has a long experience on custom-made design and implant of devices for joint and bone replacements. This follows the recent advancements in additive manufacturing, which now allows to obtain products also in metal alloy by deposition of material layer-by-layer according to a digital model. The process starts from medical image, goes through anatomical modelling, prosthesis design, prototyping, and final production in 3D printers and in case post-production. These devices have demonstrated already to be accurate enough to address properly the specific needs and conditions of the patient and of his/her physician. These guarantee also minimum removal of the tissues, partial replacements, no size related issues, minimal invasiveness, limited instrumentation. The thorough preparation of the treatment results also in a considerable shortening of the surgical and of recovery time. The necessary additional efforts and costs of custom-made implants seem to be well balanced by these advantages and savings, which shall include the lower failures and revision surgery rates. This also allows thoughtful optimization of the component-to-bone interfaces, by advanced lattice structures, with topologies mimicking the trabecular bone, possibly to promote osteointegration and to prevent infection. IOR's experience comprises all sub-disciplines and anatomical areas, here mentioned in historical order. Originally, several systems of Patient-Specific instrumentation have been exploited in total knee and total ankle replacements. A few massive osteoarticular reconstructions in the shank and foot for severe bone fractures were performed, starting from mirroring the contralateral area. Something very similar was performed also for pelvic surgery in the Oncology department, where massive skeletal reconstructions for bone tumours are necessary. To this aim, in addition to the standard anatomical modelling, prosthesis design, technical/technological refinements, and manufacturing, surgical guides for the correct execution of the osteotomies are also designed and 3D printed. Another original experience is about en-block replacement of vertebral bodies for severe bone loss, in particular for tumours. In this project, technological and biological aspects have also been addressed, to enhance osteointegration and to diminish the risk of infection. In our series there is also a case of successful custom reconstruction of the anterior chest wall. Initial experiences are in progress also for shoulder and elbow surgery, in particular for pre-op planning and surgical guide design in complex re-alignment osteotomies for severe bone deformities. Also in complex flat-foot deformities, in preparation of surgical corrections, 3D digital reconstruction and 3D printing in cheap ABS filaments have been valuable, for indication, planning of surgery and patient communication; with special materials mimicking bone strength, these 3D physical models are precious also for training and preparation of the surgery. In Paediatric surgery severe multi planar & multifocal deformities in children are addressed with personalized pre-op planning and custom cutting-guides for the necessary osteotomies, most of which require custom allografts. A number of complex hip revision surgeries have been performed, where 3D reconstruction for possible final solutions with exact implants on the remaining bone were developed. Elective surgery has been addressed as well, in particular the customization of an original total ankle replacement designed at IOR. Also a novel system with a high-tibial-osteotomy, including a custom cutting jig and the fixation plate was tested. An initial experience for the design and test of custom ankle & foot orthotics is also in progress, starting with 3D surface scanning of the shank and foot including the plantar aspect. Clearly, for achieving these results, multi-disciplinary teams have been formed, including physicians, radiologists, bioengineers and technologists, working together for the same goal

Introduction. Amputation or disarticulation is a reliable option for management of severe foot deformities and limb-length discrepancies, the surgical restoration of which are unpredictable or unfavourable. Of the various surgeries involving foot ablation, Syme's amputation is preferred for congenital deformities as it provides a growing, weight bearing stump with proprioception and cushioning. Materials and Methods. We reviewed data of all children who underwent Syme's amputation over the past 13 years at our institution. Surgical technique followed the same principles for Syme's but varied with surgeons. Results. Ten boys and ten girls, with an average age of 18 months and average follow up of 70 months were included in the study. The most common indication was fibular hemimelia. Wound complications were reported in three children, phantom pain in one, heel pad migration in two. None had wound dehiscence, flap necrosis, stump overgrowth, or calcaneal regrowth. None of this required surgical intervention. One child required an amputation at a higher-level secondary to a congenital malformation of nervous tissue in the affected leg. Prosthetic compatibility was 94.7 % and none used mobility aids. Six children participated in sports. Conclusions. Syme amputation is a safe and potentially advantageous procedure in children, with a low incidence of complications to offer patients with non-salvageable foot conditions. It offers good prosthetic use with minimal risk of complications and can offer patients a functional solution with only one surgical intervention throughout their childhood

Introduction. John Insall described medial release to balance the varus knee; the release he described included releasing the superficial MCL in severe varus cases. However, this release can create instability in the knee. Furthermore, this conventional wisdom does not correct the actual pathology which normally exists at the joint line, and instead it focuses on the distal end of the ligament where there is no pathology. We have established a new protocol consisting of 5 steps to balance the varus knee without releasing the superficial MCL and we tried this algorithm on a series of 115 patients with varus deformity and compared it to the outcome with a similar group that we have performed earlier using the traditional Insall technique. Material and method. 115 TKR were performed by the same surgeon using Zimmer Persona implant in varus arthritic knees. The deformities ranged from 15 to 35 degrees. First, the bony resection was made using Persona instrumentation as recommended by the manufacturer. The sequential balancing was divided into 5 steps (we will show a short video demonstrating the surgical techniques for each step) as follows:. Step 1: Releasing of deep MCL Step 2: Excising of osteophyte. Step 3: Excising of scarred tissue in the posteromedial corner soft phytes Step 4: Excision of the posteromedial capsule in case of flexion contracture Step 5: Releasing the semi-membranous (in gross deformity). We used soft tissue tensioner to balance the medial and lateral gaps. When the gaps are balanced at early step, there was no need to carry on the other steps. We used only primary implant and we did not have to use any constrained implant. We have compared this group with a similar group matched for deformity from previous 2 years where the conventional medial release as described by Insall. Results. We could balance all knees without releasing the superficial MCL ligament as follows:. -In[H1] 31 cases, we were able to balance the knees performing step 1 and step 2 only. -In 35 cases, we had to do step three in addition to 1 and 2 to achieve balance of cases. -In 25 cases, we performed step 4- those cases had pre-operative flexion contracture. -We had to proceed to step 5 only in 14 cases. These patients had the worst deformity in the group. We have used primary TKR in all cases; in 83 cases, we used a CR implant and in the rest, we used PS implant. Comparing this to the earlier conventional release we had to use 11 CCK implant on severe cases. Patient satisfaction was better with the new algorithm group when compared with the traditional release. Preserving the superficial MCL allowed us to maintain stability post-operatively and allowed us to use minimum constraint such as CR in severe deformity. Discussion. Many literatures have confirmed that cutting superficial MCL causes major medial instability after TKA. Releasing or pie crusting the superficial MCL can cause MCL insufficiency. Our protocol enable the surgeon to tackle the pathology rather than take a short-cut and releasing the superficial MCL. Reserving the superficial MCL allowed us to use minimal constraint even in severe deformity of 40 degrees of varus deformity. The conventional release has resulted in some cases instability, forcing us to use higher constraint such as CCK. Conclusion. Although releasing the superficial MCL has been described in different ways in multiple literature, little attention has been paid to the pathology of the posteromedial corner. This paper clearly shows that the complex anatomy of the posteromedial corner require us to pay better attention and this paper present better algorithm reserving the superficial MCL and enabling us to correct the deformity and balancing the soft tissue without instability. We strongly recommend surgeons not to release the superficial MCL because this will create instability in some cases

Aims. Tibiotalocalcaneal (TTC) fusion is used to treat a variety of conditions affecting the ankle and subtalar joint, including osteoarthritis (OA), Charcot arthropathy, avascular necrosis (AVN) of the talus, failed total ankle arthroplasty, and severe deformity. The prevalence of postoperative complications remains high due to the complexity of hindfoot disease seen in these patients. The aim of this study was to analyze the relationship between preoperative conditions and postoperative complications in order to predict the outcome following primary TTC fusion. Methods. We retrospectively reviewed the medical records of 101 patients who underwent TTC fusion at the same institution between 2011 and 2019. Risk ratios (RRs) associated with age, sex, diabetes, cardiovascular disease, smoking, preoperative ankle deformity, and the use of bone graft during surgery were related to the postoperative complications. We determined from these data which pre- and perioperative factors significantly affected the outcome. Results. Out of the 101 patients included in the study, 29 (28.7%) had nonunion, five (4.9%) required below-knee amputation (BKA), 40 (39.6%) returned to the operating theatre, 16 (15.8%) had hardware failure, and 22 (21.8%) had a postoperative infection. Patients with a preoperative diagnosis of Charcot arthropathy and non-traumatic OA had significantly higher nonunion rates of 44.4% (12 patients) and 39.1% (18 patients) (p = 0.016) and infection rates of 29.6% (eight patients) and 37% (17 patients) compared to patients with traumatic arthritis, respectively (p = 0.002). There was a significantly increased rate of nonunion in diabetic patients (RR 2.22; p = 0.010). Patients with chronic kidney disease were 2.37-times more likely to have a nonunion (p = 0.006). Patients aged over 60 years had more than a three-fold increase in the rate of postoperative infection (RR 3.60; p = 0.006). The use of bone graft appeared to be significantly protective against postoperative infection (p = 0.019). Conclusion. We were able to confirm, in the largest series of TTC ankle fusions currently in the literature, that there remains a high rate of complications following this procedure. We found that patients with a Charcot or non-traumatic arthropathy had an increased risk of nonunion and postoperative infection compared to individuals with traumatic arthritis. Those with diabetes, chronic kidney disease, or aged over 60 years had an increased risk of nonunion. These findings help to confirm those of previous studies. Additionally, our study adds to the literature by showing that autologous bone graft may help in decreasing infection rates. These data can be useful to surgeons and patients when considering, discussing and planning TTC fusion. It helps surgeons further understand which patients are at a higher risk for postoperative complications when undergoing TTC fusion. Cite this article: Bone Joint J. 2020;102-B(3):345–351

Background. Slipped capital femoral epiphysis (SCFE) creates a complex deformity of the hip that can result in cam type of femoroacetabular impingement (FAI), which may in turn lead to the early development of osteoarthritis of the hip. The purpose of this study was to evaluate the existing literature reporting on the efficacy of hip arthroscopic treatment of patients with FAI secondary to SCFE. Methods. A systematic computer search was conducted based on the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines using Embase, PubMed (Medline), and Cochrane Library up to November 2019. Data such as patient demographics, surgical outcomes and complications that described arthroscopic surgery following FAI secondary to SCFE were retrieved from eligible studies. Two authors independently reviewed study inclusion and data extraction with independent verification. Results. Following filtration, seven studies were included in this review comprising 96 patients (100 hips). The mean age was 14.9 years (SD, 2.7), and 54.2% of the cases were male. Eighty seven percent patients had undergone previous procedures at the first diagnosis of SCFE. Slip severity at the time of performing hip arthroscopy was mild for 54%, moderate for 31% and severe deformity for 15%. The mean alpha angle corrections was 32.0° (SD, 6.0°), and the mean improvement of internal rotation angle at 90° flexion was 23.6° (sd, 9.5°). ModifiedHarris Hip Scores (mHHS) was most reported (n = 3 studies; 38 hips) of the clinical outcomes, and the mean improvement of mHHS was 22.0 (sd, 3.6). Complication rates were 10%, and revision rate was 6.0%. Conclusion. Patients with FAI secondary to SCFE undergoing arthroscopic treatment demonstrate improved improvement in clinical outcome, rotation of the hip and correction of the alpha angle. It remains to be seen whether this eventually leads to prevention of OA and avoiding arthroplasty in this group of patients

Aim. In surgeries on patients with advanced ligament instabilities or severe bone defects modern-generation of rotating hinged knee prostheses are one of the main options. The objective of our study is to evaluate the mid-term functional results and complications of several surgeries using this form of prosthesis. Material and Method. The rotating hinged knee prosthesis (RHKP) was applied to 208 knees of 204 patients in primary surgeries between September 2009 and December 2017, the minimum followup was 15 months (mean, 65 months; range, 15–115 months). Of the total number of female patients there were 152 (74.5%), men − 52 (25.5%). The average age of the patients was 64,6 years (from 32 to 85). The main indications for using RHKP were severe varus deformity with flexion contracture in 107 knees (51,4%), severe valgus deformity (from 20 to 50 degrees) in 54 knees (26,0 %), severe ligamentous deficiencies in 24 knees (11,5%) and ankylosis in the flexion position in 23 cases (11,1%). Patients were evaluated clinically (Knee Society score) and radiographically (positions of components, signs of loosening, bone loss). Results. The average Knee Society Knee Scores, and Knee Society Functional Scores were 27, and 18, respectively, before the surgery; and 86, and 77 in the final post-surgery follow-ups. In addition, the average range of motion increased from the pre-operative level of 46 to 104 degrees at the final evaluation. Four patients (2%) had various complications after the surgery : two patients had deep infection, in one case took place fracture of the hinge mechanism and in one - post-operative rupture of the patellar tendon. Conclusions. Primary knee arthroplasty using RKHP can be successful in cases with advanced ligament instability or severe bone defects. Modern-generation of the kinematic rotating-hinge total knee prostheses allow to achieve in difficult primary cases the same consistently good results as commonly used constructions in standard situations