Aim. Haematogenous prosthetic joint infections account for 20-35% of total prosthetic infections. Debridement, antibiotics and implant retention (DAIR) is a well-accepted treatment for these infections and probably the most desired by surgeons, since it tries to maintain a functional and stable implant. However, the risk of DAIR failure is not negligible and some risk factors have been described, and also, different scores, such as CRIME80. Nonetheless, less is known about the impact of positive blood cultures may have on DAIR treatment. The aim of our study is to analyze whether the presence of a positive culture is a risk factor for DAIR failure. Method. A retrospective cohort study of 50 late acute haematogenous TKA infections was performed from 2015 to 2023. DAIR failure was defined as the need of a subsequent intervention either a new DAIR or a revision surgery. So, patients were divided into two groups depending on the surgical outcome: successful (SG) vs failure (FG). Demographic variables including age, gender, affected side and body mass index were collected. Patient's comorbidities were also collected including chronic obstructive pulmonary disease (COPD), diabetes, rheumatoid arthritis (RA), cirrhosis and chronic renal failure, etc. Other variables, such as ones included in CRIME80 (C-reactive protein (CRP) >150mg/dl and polyethylene exchange), were also collected. Results. 30 patients had a successful DAIR outcome (60%). Age and sex do not act as risk factors [OR 0.7 (0.2-2.6) and OR 0.4 (0.1-1.3)]. Neither do COPD [OR 3.3 (0.5-2.0), p=0.2]; RA [OR 0.8 (0.2-3.1), p=0.7]; CRP value [3.2 (0.9-11.2), p=0.06]; and polyethylene exchange [OR 0.4 (0.1-2.5), p= 0.3]. Thirty-five blood cultures (70%) were obtained before surgery (20 SG and 15 FG). Nine of the obtained blood cultures were positive (25.7%), being 7 from FG (46.7%) [OR 7.6 (1.3-4.8), p=0.02]. A logistic regression was performed where positive blood cultures were the only significant variable to predict DAIR failure (OR 12, 95% CI 1.1−18, p=0.049), after adjusting for all CRIME80 variables. Skin and soft tissue origin was described in 5 of the nine positive blood cultures (55.6%). Cardiovascular system was the second most common spread (22.2%), and then followed by urogenital and digestive tract. The most common microorganism in FG was Staphylococcus aureus (57.1%) [OR 6.4 (0.2-18.0), p=0.2]. Conclusions. Positive blood cultures may be another risk factor for DAIR failure. This can be important in diagnosis and it may be taken into account in antibiotic and surgical treatment strategies

Background. Two-stage revision arthroplasty is the standard treatment for chronic hip and knee periprosthetic joint infections (PJI). Accurate diagnosis of persistent infections at 2nd stage using established biomarkers and diagnostic criteria is of paramount importance. This study aimed to evaluate the diagnostic value of synovial calprotectin and alpha-defensin, and compare established diagnostic criteria from the International Consensus Meeting (ICM 2018) and the European Bone and Joint Infection Society (EBJIS 2021) to determine persistent PJI at the 2nd stage of a two-stage revision arthroplasty. Methods. We retrospectively analyzed 97 patients who underwent 100 two-stage revisions (hip: 39, knee: 61). Synovial fluid samples were assessed for calprotectin and alpha-defensin levels. ICM 2018 and EBJIS 2021 were applied to all patients undergoing 2nd stage revision. Receiver operating characteristic (ROC) curves and Youden Index were utilized to determine optimal cut-off values, and correlations between biomarkers were evaluated. The microbiological spectrum was analyzed at 2nd stage and re-revision surgery. Results. Calprotectin levels showed a sensitivity of 66.7%, specificity of 32.9%, and accuracy of 38.0% in predicting septic failure. Alpha-defensin showed sensitivity of 28.6%, specificity of 87.8%, and accuracy of 79.2%. Significant correlations included: calprotectin with PMN% (r = 0.471, p = 0.05) and alpha-defensin with WBC (r = 0.830, p < 0.01) in the successful cohort. For septic re-revisions, calprotectin and alpha-defensin were highly correlated (r = 0.969, p < 0.01). ICM correctly diagnosed persistent PJI in 26.7%, while EBJIS diagnosed 24.2%. The microbial spectrum shifted from gram-positive to gram-negative bacteria between reimplantation and re-revision surgeries. Conclusion. Synovial calprotectin and alpha-defensin demonstrated limited accuracy in ruling out persistent PJI at reimplantation. The low sensitivity of current diagnostic criteria, combined with the observed shift in microbial spectrum, underscores the challenges in diagnosing persistent PJI during 2nd stage of a two-stage revisions arthroplasty

Aim. Periprosthetic joint infection (PJI) is one of the main reasons for revision surgery after primary unicompartmental knee arthroplasty (UKA), total knee arthroplasty (TKA) or total hip arthroplasty (THA). Currently the MSIS and EBJIS criteria sets are considered to be the gold standards in determining PJI. These criteria sets are complex and contain tests that are time-consuming and many are rather costly. Therefore, further research is indicated to find a simpler but equally reliable diagnostic test. In this study we evaluated the additional value of calprotectine measurement in synovial fluid in patients undergoing hip and knee (revision) arthroplasty following routine work-up. Method. In a retrospective cohort study, we analyzed 182 synovial fluid samples from 143 patients with suspected PJI after UKA, TKA, THA or revision arthroplasty. Twenty-six of those cases were classified as PJI according to the MSIS and EBJIS criteria. Subsequently, synovial calprotectin was determined, using a lateral flow assay and two cut-off thresholds of ≥14 mg/L and ≥50 mg/L. Sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) of synovial calprotectin was determined. Results. When applying the MSIS and EBJIS criteria and a calprotectin level ≥14 mg/L, synovial calprotectin revealed an area under the curve of 0.96 (95% CI 0.90-1.00), with 92.3% sensitivity and 100% specificity. The PPV and NPV were 100% and 92.9% respectively. When applying the MSIS and EBJIS criteria and a calprotectin level ≥ 50 mg/L, synovial calprotectin revealed an area under the curve of 0.94 (95% CI 0.87-1.00), with 88.5% sensitivity and 100% specificity. The PPV and NPV were 100% and 89.7% respectively. Conclusions. The value of calprotectin in synovial fluid gives valuable information with a single test result, resulting in high predictive value in the diagnosis of PJI after hip or knee arthroplasty and should seriously be considered as part of PJI diagnostics in an outpatient clinical setting. The high specificity can help rule in patients that are suspected of PJI. Therefor this test can be helpful in a preop diagnostic work-up to avoid unnecessary revisions in patients with well-placed and well-fixed arthroplasties with a suspected PJI. These conclusions are independent of which criteria set was used as a gold standard

Aims

Pain is the most frequent complaint associated with osteonecrosis of the femoral head (ONFH), but the factors contributing to such pain are poorly understood. This study explored diverse demographic, clinical, radiological, psychological, and neurophysiological factors for their potential contribution to pain in patients with ONFH.

Aim. Accurate diagnosis is key in correctly managing prosthetic joint infection(PJI). Shoulder PJI definition and diagnosis is challenging. Current PJI definitions, based overwhelmingly in hip/knee research, may not accurately diagnose shoulder PJI. Our aim is to compare the preoperative performance of two PJI definitions comparing it to definitive postoperative classification. Method. This is a retrospective study of patients who have undergone total shoulder revision surgery for infection between 2005 and 2022. Cases were classified using two different PJI definitions: a)the European Bone and Joint Infection Society (EBJIS) and; 2)the 2018 International Consensus Meeting(ICM) PJI specific shoulder definition. Preoperative classification was based on clinical features, inflammatory markers and synovial fluid leukocyte count and definitive classification also considered microbiology and histology results. Results. Preoperative and definitive PJI classification status of the 21 patients included were evaluated and is summarized in table 1. The shoulder specific 2018 ICM definition showed the highest agreement between preoperative and definitive classification (76.2%, k=0.153, p=0.006) compared to EBJIS (52.4%, k=0.205, p=0.006). In all cases, the classification was changed because of positive intraoperative microbiology (at least two identical isolates). Microbiology findings showed coagulase negative staphylococci, Staphyloccocus aureus and Cutibacterium acnes to be the most frequent. Four patients had polymicrobial infections. Conclusions. Both the EBJIS 2021 and 2018 ICM definitions have low accuracy in predicting shoulder PJI preoperatively. Clearly further studies with larger cohorts are in dire need focusing specifically on shoulder revision arthroplasty to improve on existing definitions. Caution is advised while extrapolating of criteria/thresholds recommended for hip/knee joints. For any tables or figures, please contact the authors directly

Aim. Predicting success of a Debridement, Antibiotics and Implant Retention (DAIR) procedure for Periprosthetic Joint Infection (PJI) remains a challenge. A failed DAIR might adversely affect the outcome of any future revision surgery for PJI. Hence, the ability to identify and optimise factors predictive of DAIR success would help target the procedure to the appropriate patient cohort and avoid unnecessary surgery for patients where a DAIR is unlikely to eradicate infection. Method. A retrospective review of our prospective Bone Infection Group database was performed to identify all patients who underwent a DAIR of their hip or knee arthroplasty. Diagnosis of PJI was confirmed using the Musculoskeletal Infection Society (MSIS) 2013 and the European Bone and Joint Infection Society (EBJIS) 2021 classification systems. DAIR surgery was grouped into “successful” or “unsuccessful” outcomes as per the MSIS working group outcome-reporting tool. Results. Sixty-Four consecutive patients with an acute PJI underwent a DAIR procedure between 2009 and 2020. Treatment was successful in 44 (69%). The chance of a successful DAIR was significantly greater if performed within one week of symptom onset compared to greater than one week duration (adjusted odds ratio (OR 0.11; p=0.027; 95% CI [0.02- 0.78]). The chances of a successful DAIR was not influenced by whether the surgeon was an arthroplasty or non-arthroplasty surgeon (OR 0.28; p=0.13; 95% CI [0.05- 1.48]). Isolated Streptococcus infection had a success rate of 100%; followed by Coagulasenegative Staphylococci 71% and Methicillin-susceptible Staphylococcus Aureus 65%. Polymicrobial infection had the worst outcome with a success rate of 47%. Conclusions. In our experience DAIR surgery performed within one week of symptom onset, significantly increased chances of successful infection eradication. Collaborative work is required to ensure arthroplasty patients access prompt appropriate surgical decision-making, remove barriers to early assessment and minimise delays to surgery

Aim. Determine therapeutic and prognostic value of three different prosthetic joint infections (PJI) staging systems – JS-Bach, McPherson and PJI-TNM. Method. Retrospective analysis of patients who received surgery for PJI between 2011 and 2022 at one single institution, including DAIR, 1-stage revision and 2-stage revision. We applied three staging systems - JS-Bach, McPherson, PJI-TNM – and categorize the results into A (less severe), B (intermediate) and C (most severe). Demographic data and comorbidities, anatomic location, type of treatment, recurrency of infection, final outcome and antibiogram were analyzed. Results. 186 patients were included, 112 (60%) were woman. Median age was 70 years old. 51% were submitted to DAIR, 10% to 1-stage revision and 39% to 2-stage revision. Recurrence of infection was found on 27% of patients after initial treatment. 10% died with complication related to PJI. Final status at last follow-up showed 96% of cases were ultimately free of infection at last follow-up. JS-BACH was associated with recurrence. All three staging systems were associated with final outcome. Conclusions. Despite all existing knowledge around risk factors for treatment failure of PJI, there is still a lack of a generally accepted classification system to accurately predict patient outcome. JS-BACH, McPherson and PJI-TNM are three different proposed classifications developed to predict clinical outcomes. To the best of our knowledge there are no studies directly comparing their performance. We retrospectively evaluated our cohort and found that all three correlated with final patient outcome but JS-BACH was the only who significantly correlated with infection recurrence after initial treatment

Aim. There is controversy regarding the use of Antibiotic-loaded cement (ALBC) as compared to non-antibiotic-loaded cement (NALBC) to reduce the overall infection rate without affecting implant survival or adding additional risks on fixation for primary total knee arthroplasty (TKA). Method. To conduct the analysis, we utilized the Catalan Arthroplasty Registry (RACat) for the TKAs implanted between 2005 and 2017. The primary variable recorded was the use of cement with or without antibiotics. Other recorded variables included were age, sex, diabetes mellitus, obesity, Charlson index and type of hospital. We analyzed the effect of ALBC vs. NALBC in reducing the risk of prosthetic infection at 3, 6, 12, and 24 months as well as prosthetic survival due to mechanical causes at 1, 5, and 10 years. Univariate and multivariable analyses of risk factors were conducted. Thereby, an interactive predictive model that determines the risk of prosthetic infection based on each patient's characteristics was created. Results. A total of 28,287 TKAs from the RACat were analyzed. In that total, there were 19,788 NALBC and 8,499 ALBC. The infection rates for TKAs with NALBC vs. those with ALBC at 3, 6, 12, and 24 months were respectively: 1.69% vs. 1.39% (p=0.132); 1.81% vs. 1.56% (p=0.147); 2.14% vs. 1.73% (p=0.030); 2.51% vs. 1.86% (p=0.001). A statistically significant reduction in periprosthetic infection rate was observed in the ALBC group at 12 and 24 months. No differences were observed between the two groups in terms of prosthetic mechanical survival. Being younger, male and having had previous knee surgery or having a high comorbidity index all led to a higher risk of prosthetic revision due to infection. Conclusions. The use of ALBC as a fixation method for TKA leads to a reduction in the risk of prosthetic infection without altering the mechanical survival of the implant. The creation of a predictive model helps determine the individualized risk of prosthetic infection based on the patient's characteristics

Aim. dalbavancin, a lipo-glycopeptide antibiotic effective against Gram-positive bacteria (including methicillin-resistant Staphylococcus aureus), allows extended dosing interval due to its peculiar pharmacokinetics. Despite being registered for treatment of acute skin infections, off-label use has shown promise in various settings, particularly in osteo-articular infections. This study aims to assess dalbavancin's pharmacological efficacy and its safety and clinical success in patients treated according to personalized schedules guided by Therapeutic Drug Monitoring (TDM), particularly in long-term therapies. Methods. non-interventional, retrospective, single-center pharmacological study. We included adult patients with at least one dalbavancin TDM determination from July 1, 2022 to February 1, 2024 and treated with outpatient parenteral antimicrobial therapy. We recorded dalbavancin trough concentration (Cmin) and its peak concentration (Cmax) and employed log-linear regression models to predict the timing of dalbavancin dosing, aiming to sustain Cmin levels above 4 or 8.04 mg/L, according to recent literature. Data regarding index infections, patients’ characteristics, outcomes, and adverse events were also collected. Results. we included 32 patients, whose clinical and microbiological characteristics are depicted in Table 1. Regarding the primary outcome, 132/134 (98.5%) trough concentration was >4 mg/L, while 112/134 (83.6%) was >8.04 mg/L. For the secondary outcomes, 2/32 patients experienced an adverse event correlated to dalbavancin: (i) exanthema one week after the start of therapy and (ii) exanthema, conjunctivitis, angioedema, and nausea one month after the start of therapy. Moreover, we observed 4/32 clinical unsuccess (one failure during treatment, one relapse after the end of therapy, one switch to another antibiotic, and one isolation of non-susceptible microorganism). Conclusions. a TDM-based approach with the use of a log-linear regression model allows a more precise timing of dalbavancin administration by maintaining sufficient concentration of circulating drugs. This approach is promising for infections requiring a long-term treatment, such as orthopedic infection where source control is not possible. For any tables or figures, please contact the authors directly

Aim. Prosthetic joint infection (PJI) is assessed using clinical history and examination, imaging studies and laboratory investigations which inform diagnostic tools such as that proposed by the European Bone and Joint Infection Society to determine the probability of infection. Infection is often confirmed by microbiology culture and histology from intraoperative samples, but ideally a diagnosis of infection is made preoperatively to guide management decisions. At our institution, a tertiary referral centre for PJI, ultrasound (US)-guided synovial biopsy is routinely used as an adjunct to preoperative joint aspiration. Our aim was to evaluate the sensitivity and specificity of microbiology and histology results from US-guided synovial biopsy samples when compared to intraoperative samples. Method. In this retrospective study we analysed all prosthetic hip and knee US-guided biopsies performed at our institution over a 5 year period between 2018 and 2022. Microbiology and histology results from preoperative biopsy samples were individually compared to microbiology and histology findings from intraoperative samples. Results. 381 biopsies were performed; 281 knee, 100 hip. US-guided biopsy results showed strong positive predictive values (PPVs) in hip biopsies (microbiology PPV (79.3%), histology PPV (85.7%)) and knee biopsies (microbiology PPV (77%), histology PPV (85%)). Biopsies showed low sensitivity in predicting intraoperative findings (hip microbiology sensitivity (62%), hip histology sensitivity (31%), knee microbiology sensitivity (70%), knee histology sensitivity (21%). Biopsies showed high specificity for knee (microbiology specificity (89%), histology specificity (97%)) and hip (microbiology specificity (73%), histology specificity (91%)). Conclusions. This study demonstrates that US-guided biopsy is a valuable diagnostic aid for PJI with high specificities and PPVs. Furthermore US-biopsy is valuable when there is limited fluid for aspiration

Aim. This study aimed to externally validate promising preoperative PJI prediction models in a recent, multinational European cohort. Method. Three preoperative PJI prediction models (by Tan et al., Del Toro et al., and Bülow et al.) which previously demonstrated high levels of accuracy were selected for validation. A multicenter retrospective observational analysis was performed of patients undergoing total hip arthroplasty (THA) and total knee arthroplasty (TKA) between January 2020 and December 2021 and treated at centers in the Netherlands, Portugal, and Spain. Patient characteristics were compared between our cohort and those used to develop the prediction models. Model performance was assessed through discrimination and calibration. Results. A total of 2684 patients were included of whom 60 developed a PJI (2.2%). Our patient cohort differed from the models’ original cohorts in terms of demographic variables, procedural variables, and the prevalence of comorbidities. The c-statistics for the Tan, Del Toro, and Bülow models were 0.72, 0.69, and 0.72 respectively. Calibration was reasonable, but precise percentage estimates for PJI risk were most accurate for predicted risks up to 3-4%; the Tan model overestimated risks above 4%, while the Del Toro model underestimated risks above 3%. Conclusions. In this multinational cohort study, the Tan, Del Toro, and Bülow PJI prediction models were found to be externally valid for classifying high risk patients for developing a PJI. These models hold promise for clinical application to enhance preoperative patient counseling and targeted prevention strategies. Keywords. Periprosthetic Joint Infection (PJI), High Risk Groups, Prediction Models, Validation, Infection Prevention

Aim. Periprosthetic joint infection (PJI) is a devastating complication that develops after total joint arthroplasty (TJA) whose incidence is expected to increase over the years. Traditionally, surgical treatment of PJI has been based on algorithms, where early infections are preferably treated with debridement, antibiotics, and implant retention (DAIR), while late infections with two-stage revision surgery. Two-stage revision is considered the “gold standard” for treatment of chronic PJI. In this observational retrospective study, we investigated the potential role of inflammatory blood markers (neutrophil-to- lymphocyte ratio (NLR), monocyte-to-lymphocyte ratio (MLR), platelet-to-lymphocyte ratio (PLR), systemic inflammatory index (SII)], systemic inflammatory response index (SIRI), and aggregate index of systemic inflammation (AISI)) as prognostic factors in two-stage exchange arthroplasty for PJI. Method. A single-center retrospective analysis was conducted, collecting clinical data and laboratory parameters from patients submitted to prosthetic explantation for chronic PJI. Laboratory parameters (PCR, NLR, MLR, PLR, SIRI, SII and AISI) were evaluated at the explantation time, at 4, 6, 8 weeks after surgery and at reimplantation time. Correlation between laboratory parameters and surgery success was evaluated, defined as infection absence/resolution at the last follow up. Results. 57 patients with PJI were evaluated (62% males; average age 70 years, SD 12.14). Fifty-three patients with chronic PJI were included. Nineteen patients completed the two-stage revision process. Among them, none showed signs of re-infection or persistence of infection at the last available follow up. The other twenty-three patients did not replant due to persistent infection: among them, some (the most) underwent spacer retention; others were submitted to Girdlestone technique or chronic suppressive antibiotic therapy. Of the patients who concluded the two-stage revision, the ones with high SIRI values (mean 3.08 SD 1.7, p-value 0.04) and MLR values (mean 0.4 SD 0.2, p-value 0.02) at the explantation time were associated with a higher probability of infection resolution. Moreover, higher variation of SIRI and PCR, also defined respectively delta-SIRI (mean −2.3 SD 1.8, p-value 0.03) and delta-PCR (mean −46 SD 35.7, p-value 0.03), were associated with favorable outcomes. Conclusions. The results of our study suggest that, in patients with PJI undergoing two-stage, SIRI and MLR values and delta-SIRI and delta-PCR values could be predictive of favorable outcome. The evaluation of these laboratory indices, especially their determination at 4 weeks after removal, could therefore help to determine which patients could be successfully replanted and to identify the best time to replant

Aim. Debridement, antibiotics and implant retention (DAIR) is recommended for acute postoperative and late acute prosthetic joint infection (PJI). There are two recommend scores to predict its outcome, KLIC and CRIME 80 scores respectively. They have not been widely adopted for decision making. We aim to evaluate them in predicting DAIR failure in our cohort. Method. All patients submitted to DAIR after total hip or knee PJI, between 2010 and 2021, with a minimum one-year follow-up, were retrospectively evaluated. We excluded tumoral total joint replacements. KLIC score was applied to acute PJIs and CRIME 80 to late acute (LA) PJI. LA PJI was defined as the development of acute symptoms occurring ≥ 3 months after implantation. Repeat DAIR was performed as needed. Failure was defined as the need for implant removal, amputation, infection related death and suppressive antibiotic therapy. Results. We included 102 patients. The overall failure rate was 35.5% (36/102). There was no significant difference for the rate of failure in patients that had one DAIR and those who repeated DAIR - 32.5% (26/80) vs. 45.5% (10/22) (p=0.26). There were no significant correlations between KLIC or CRIME 80 scores and failure rates (p=0.54 and p=0.93 respectively, figure 1). Focusing specifically on the cohort who underwent repeat DAIR (n=22), KLIC and CRIME-80 score were also not associated with failure (p= 0.44 and p=0.50 respectively, figure 1). No host, pathogen or antibiotic treatment related factors were found to predict failure. Conclusions. In our cohort KLIC- and CRIME-80 scores failed to be predictive of DAIR failure, even in the cohort that needed repeat DAIR. We were unable to find any independent failure risk factors. For any tables or figures, please contact the authors directly

Introduction. Patients with external fixators are at risk of pin site infection. A more objective assessment of possible pin site infection is warranted, particularly for future home-based monitoring of pin sites. The aim was to determine if thermography can detect signs of inflammation around pin sites by 1) Establishing a maximum temperature cut-off value 2) Investigating the correlation between local temperature and visual signs of inflammation 3) Adjust for anatomical location and ambient room temperature. Method. This was a cross-sectional international multi-center study following STROBE guidelines. All patients with external ring-fixators scheduled for a visit in the out-patient clinic were eligible. Visual signs of inflammation were categorized using the Modified Gordon classification System (MGS, simplified sMGS). Thermographic imaging was done with an infrared camera (FLIR T540) and the maximum temperature within the ROI (MaxTp) was the primary outcome measure. Sample size and reliability were estimated. Cohen-Kappa, ROC-curve/AUC and Poisson regression were used for statistical analysis. Result. Data from 1970 pin sites were included. Inter-rater reliability of MGS was Kappa=0.79 and for MaxTp ICC=0.99 (95%CI: 0.99;0.99). Overall, a tendency of rising temperature with increasing sMGS was seen. The difference between sMGS=0 and sMGS>0 was significant. The performance of MaxTp as a screening tool to detect inflammation was reasonable with an AUC of 0.71 (95% CI: 0.65-0.76). The empirically optimal cut-off value was 34.1°C (Sensitivity=65%, Specificity=72%, Positive predictive value=23%, Negative Predictive value=94%). A 1°C increase in MaxTp increased the RR of visual signs of inflammation by a factor 1.5 (95% CI: 1.3; 1.7). Conclusion. We found a clinical positive association between the temperature at the pin site measured with thermography and visual signs of inflammation. The empirically optimal temperature cut-off value for inflammation screening was 34.1°C. Thermography may be a promising tool for a for a future point of care technology

Introduction. This study aims to investigate the relationship between ulnar fixation and postoperative satisfaction among patients with distal radius fractures accompanied by ulna styloid fractures, with a particular focus on how sociodemographic factors influence outcomes. Method. A retrospective cohort study was conducted involving 120 patients aged 26-53 who underwent surgical treatment for distal radius fractures with concomitant ulna styloid fractures between January 2018 and December 2022. Patients were divided into two groups based on whether ulnar fixation was performed. Sociodemographic data, including age, gender, socioeconomic status, education level, and occupation, were collected. All patients underwent similar physical therapy protocols in the postoperative period, and no complications were observed in any patient. Postoperative satisfaction was assessed using the Patient-Rated Wrist Evaluation (PRWE) and the Disabilities of the Arm, Shoulder, and Hand (DASH) scores at 6 and 12 months post-surgery. Statistical analysis was conducted to evaluate the influence of ulnar fixation and sociodemographic factors on patient satisfaction. Result. Patients who underwent ulnar fixation (n=60) reported significantly higher satisfaction levels compared to those who did not (n=60), as evidenced by lower PRWE and DASH scores (p < 0.05). Age, gender, and socioeconomic status were significant predictors of postoperative satisfaction. Younger patients, females, and those with higher socioeconomic status exhibited greater improvements in functional outcomes and satisfaction. However, education level and occupation did not significantly influence satisfaction scores. Conclusion. Ulnar fixation in the surgical treatment of distal radius fractures accompanied by ulna styloid fractures is associated with improved postoperative satisfaction. Sociodemographic factors, particularly age, gender, and socioeconomic status, play a crucial role in patient-reported outcomes. Tailoring postoperative care to address these sociodemographic differences may enhance overall patient satisfaction and recovery

Introduction. Knee arthroplasty (KA), encompassing Total Knee Replacement (TKR) and Unicompartmental Knee Replacement (UKR), is one of the most common orthopedic procedures, aimed at alleviating severe knee arthritis. Postoperative KA management, especially radiographic imaging, remains a substantial financial burden and lacks standardised protocols for its clinical utility during follow-up. Method. In this retrospective multicentre cohort study, data were analysed from January 2014 to March 2020 for adult patients undergoing primary KA at Imperial NHS Trust. Patients were followed over a five-year period. Four machine learning models were developed to evaluate if post-operative X-ray frequency can predict revision surgery. The best-performing model was used to assess the risk of revision surgery associated with different number of X-rays. Result. The study assessed 289 knees with a 2.4% revision rate. The revision group had more X-rays on average than the primary group. The best performing model was Logistic Regression (LR), which indicated that each additional X-ray raised the revision risk by 52% (p<0.001). Notably, having four or more X-rays was linked to a three-fold increase in risk of revision (OR=3.02; p<0.001). Our results align with the literature that immediate post-operative X-rays have limited utility, making the 2nd post-operative X-ray of highest importance in understanding the patient's trajectory. These insights can enhance management by improving risk stratification for patients at higher revision surgery risk. Despite LR being the best-performing model, it is limited by the dataset's significant class imbalance. Conclusion. X-ray frequency can independently predict revision surgery. This study provides insights that can guide surgeons in evidence-based post-operative decision-making. To use those findings and influence post-operative management, future studies should build on this predictive model by incorporating a more robust dataset, surgical indications, and X-ray findings. This will allow early identification of high-risk patients, allowing for personalised post-operative recommendations

Introduction. The increased prevalence of osteoporosis in the patient population undergoing reverse shoulder arthroplasty (RSA) results in significantly increased complication rates. Mainly demographic and clinical predictors are currently taken into the preoperative assessment for risk stratification without quantification of preoperative computed tomography (CT) data (e.g. bone density). It was hypothesized that preoperative CT bone density measures would provide objective quantification with subsequent classification of the patients’ humeral bone quality. Methods. Thirteen bone density parameters from 345 preoperative CT scans of a clinical RSA cohort represented the data set in this study. The data set was divided into testing (30%) and training data (70%), latter included an 8-fold cross validation. Variable selection was performed by choosing the variables with the highest descriptive value for each correlation clustered variables. Machine learning models were used to improve the clustering (Hierarchical Ward) and classification (Support Vector Machine (SVM)) of bone densities at risk for complications and were compared to a conventional statistical model (Logistic Regression (LR)). Results. Clustering partitioned this cohort (training data set) into a high bone density subgroup consisting of 96 patients and a low bone density subgroup consisting of 146 patients. The optimal number of clusters (n = 2) was determined based on optimization metrics. Discrimination of the cross validated classification model showed comparable performance for the training (accuracy=91.2%; AUC=0.967) and testing data (accuracy=90.5 %; AUC=0.958) while outperforming the conventional statistical model (Logistic Regression (LR)). Local interpretable model-agnostic explanations (LIME) were created for each patient to explain how the predicted output was achieved. Conclusion. The trained and tested model provides preoperative information for surgeons treating patients with potentially poor bone quality. The use of machine learning and patient-specific calibration showed that multiple 3D bone density scores improved accuracy for objective preoperative bone quality assessment

Introduction. Epiphysiodesis, defined as the process of closing the growth plate (physis), have been used for several years as a treatment option of cases where the predicted leg-length discrepancy (LLD) falls between 2 to 5 cm. The aim of this study was to systematically review the existing literature on the effectiveness of three different epiphysiodesis techniques with implant usage for the treatment of leg-length discrepancy in the pediatric population. The secondary aim was to address the reported complications of staples, tension-band plates (TBP) and percutaneous epiphysiodesis screws (PETS). Method. This systematic review was performed according to PRISMA guidelines. We searched MEDLINE (PubMed), Embase, Cochrane Library, Web of Science and Scopus for studies on skeletally immature patients with LLD treated with epiphysiodesis with an implant. The extracted outcome categories were effectiveness of epiphysiodesis (LLD measurements pre/post-operatively, successful/unsuccessful) and complications that were graded on severity. Result. Forty-four studies (2184 patients) were included, from whom 578 underwent TBP, 455 PETS and 1048 staples. From pooled analysis of the studies reporting success rate, 64% (150/234) successful TBP surgeries (10 studies), 78% (222/284) successful PETS (9 studies) and 52% (212/407) successful Blount staples (8 studies). Severe complications rate was 7% for PETS, 17% for TBP and 16% for Blount staples. TBP had 43 cases of angular deformity (10%), Blount staples 184 (17%) while PETS only 18 cases (4%). Conclusion. Our results highlighted that PETS seems to be the most successful type of epiphysiodesis surgery with an implant, with higher success rate and lower severe complications than TBP or Blount staples

Introduction. Achieving an appropriate primary stability after implantation is a prerequisite for the long-term viability of a dental implant. Virtual testing of the bone-implant construct can be performed with finite element (FE) simulation to predict primary stability prior to implantation. In order to be translated to clinical practice, such FE modeling must be based on clinically available imaging methods. The aim of this study was to validate an FE model of dental implant primary stability using cone beam computed tomography (CBCT) with ex vivo mechanical testing. Method. Three cadaveric mandibles (male donors, 87-97 years old) were scanned by CBCT. Twenty-three bone samples were extracted from the bones and conventional dental implants (Ø4.0mm, 9.5mm length) were inserted in each. The implanted specimens were tested under quasi-static bending-compression load (cf. ISO 14801). Sample-specific homogenized FE (hFE) models were created from the CBCT images and meshed with hexahedral elements. A non-linear constitutive model with element-wise density-based material properties was used to simulate bone and the implant was considered rigid. The experimental loading conditions were replicated in the FE model and the ultimate force was evaluated. Result. The experimental ultimate force ranged between 67 N and 789 N. The simulated ultimate force correlated better with the experimental ultimate force (R. 2. =0.71) than the peri-implant bone density (R. 2. =0.30). Conclusion. The developed hFE model was demonstrated to provide stronger prediction of primary stability than peri-implant bone density. Therefore, hFE Simulations based on this clinically available low-radiation imaging modality, is a promising technology that could be used in future as a surgery planning tool to assist the clinician in evaluating the load-bearing capacity of an implantation site. Acknowledgements. Funding: EU's Horizon 2020 grant No: 953128 (I-SMarD). Dental implants: THOMMEN Medical AG

Introduction. Pedicle screw loosening in posterior instrumentation of thoracolumbar spine occurs up to 60% in osteoporotic patients. These complications may be alleviated using more flexible implant materials and novel designs that could be optimized with reliable computational modeling. This study aimed to develop and validate non-linear homogenized finite element (hFE) simulations to predict pedicle screw toggling. Method. Ten cadaveric vertebral bodies (L1-L5) from two female and three male elderly donors were scanned with high-resolution peripheral quantitative computed tomography (HR-pQCT, Scanco Medical) and instrumented with pedicle screws made of carbon fiber-reinforced polyether-etherketone (CF/PEEK). Sample-specific 3D-printed guides ensured standardized instrumentation, embedding, and loading procedures. The samples were biomechanically tested to failure in a toggling setup using an electrodynamic testing machine (Acumen, MTS) applying a quasi-static cyclic testing protocol of three ramps with exponentially increasing peak (1, 2 and 4 mm) and constant valley displacements. Implant-bone kinematics were assessed with a stereographic 3D motion tracking camera system (Aramis SRX, GOM). hFE models with non-linear, homogenized bone material properties including a strain-based damage criterion were developed based on intact HR-pQCT and instrumented 3D C-arm scans. The experimental loading conditions were imposed, the maximum load per cycle was calculated and compared to the experimental results. HR-pQCT-based bone volume fraction (BV/TV) around the screws was correlated with the experimental peak forces at each displacement level. Result. The nonlinear hFE models accurately (slope = 1.07, intercept = 0.2 N) and precisely (R. 2. = 0.84) predicted the experimental peak forces at each displacement level. BV/TV alone was a weak predictor (R. 2. <0.31). Conclusion. The hFE models enable fast design iterations aiming to reduce the risk of screw loosening in low-density vertebrae. Improved flexible implant designs are expected to contribute to reduced complication rates in osteoporotic patients