The aim of this study was to report the restauration of the normal vertebral morphology and the absence of curve progression after removal the instrumentation in AIS patients that underwent posterior correction of the deformity by common all screws construct whitout fusion. A series of 36 AIS immature patients (Risser 3 or less) were include in the study. Instrumentation was removed once the maturity stage was complete (Risser 5). Curve correction was assessed at pre and postoperative, before instrumentation removal, just post removal, and more than two years after instrumentation removal. Epiphyseal vertebral growth modulation was assessed by a coronal wedging ratio (WR) at the apical level of the main curve (MC). The mean preoperative coronal Cobb was corrected from 53.7°±7.5 to 5.5º±7.5º (89.7%) at the immediate postop. After implants removal (31.0±5.8 months) the MC was 13.1º. T5–T12 kyphosis showed a significant improvement from 19.0º before curve correction to 27.1º after implants removal (p<0.05). Before surgery, WR was 0.71±0.06, and after removal WR was 0.98±0.08 (p<0.001). At the end of follow-up, the mean sagittal range of motion (ROM) of the T12-S1 segment was 51.2±21.0º. SRS-22 scores improved from 3.31±0.25 preoperatively to 3.68±0.25 at final assessment (p<0.001). In conclusion, fusionless posterior approach using a common all pedicle screws construct correct satisfactory scoliotic main curves and permits removal of the instrumentation once the bone maturity is reached. The final correction was highly satisfactory and an acceptable ROM of the previously lower instrumented segments was observed

The development of spinal deformity in children with underlying neurodisability can affect their ability to function and impact on their quality of life, as well as compromise provision of nursing care. Patients with neuromuscular spinal deformity are among the most challenging due to the number and complexity of medical comorbidities that increase the risk for severe intraoperative or postoperative complications. A multidisciplinary approach is mandatory at every stage to ensure that all nonoperative measures have been applied, and that the treatment goals have been clearly defined and agreed with the family. This will involve input from multiple specialities, including allied healthcare professionals, such as physiotherapists and wheelchair services. Surgery should be considered when there is significant impact on the patients’ quality of life, which is usually due to poor sitting balance, back or costo-pelvic pain, respiratory complications, or problems with self-care and feeding. Meticulous preoperative assessment is required, along with careful consideration of the nature of the deformity and the problems that it is causing. Surgery can achieve good curve correction and results in high levels of satisfaction from the patients and their caregivers. Modern modular posterior instrumentation systems allow an effective deformity correction. However, the risks of surgery remain high, and involvement of the family at all stages of decision-making is required in order to balance the risks and anticipated gains of the procedure, and to select those patients who can mostly benefit from spinal correction.

Introduction. Traditionally correction of idiopathic paediatric scoliosis is done by hybrid fixation. This involves a judicious combination of mono-axial and poly-axial screw constructs. This has inherent perceived advantages with better deformity correction and maintaining alignment without loss of correction over time. Study design. Single centre retrospective review of prospective collected data on the radiological analysis of idiopathic paediatric scoliosis corrections. The study compared hybrid screw constructs (poly-axial & mono-axial) to all poly-axial screw constructs over 28 months. Objective. Compare loss of correction between hybrid screw construct group (HSG) and all poly-axial screw construct group (PSG). Method. Retrospective review of preoperative, post-operative and latest follow-up radiographs on the cohort of 42 consecutive patients over a period of 28 months from a single surgeon series. Results. There were 19 patients (16 females, 3 male) in HSG and 23 (18 females, 5 male) in PSG. Average age at surgery was 14 years for HSG and 15.8 years for PSG. The average baseline Cobbs angle for HSG was 64.57°and 60.79° for PSG. In the HSG, on average 11.6 levels were fused and, in the PSG, it was 11.3 level. Mean screw density for HSG was 1.54 and PSG was 1.6. Mean correction from pre-op to immediate post-op was 46.06° (70.10%) in the HS group and 41.24 degrees (67.78%) in the PS group. At the last follow-up, mean correction was 45.12° (68.0%) for the HSG and 42.43° (70.39%) for PSG. Loss of correction from post-operative radiographs to latest follow up averaged 10.05% in HSG and 3.86% for PSG. Discussion. All poly-axial screw constructs has the advantage of minimal tray inventory, simple logistics, decreased surgical time and overall better efficiency. Rod application and derotation over poly-axial screw constructs is well controlled and we found no difference in the performance of these screws during and after the procedure. Conclusion. There was no statistically significant difference in the degree or loss of correction in HSG or PSG. No difference in radiological outcomes. In poly-axial pedicle screw construct, threading the rod and correction manoeuvres are easier and thereby reducing surgical times. There was no compromise on the derotation manoeuvre and correction of the apical rotation deformity. Our findings show that all poly-axial screw constructs in the management of idiopathic scoliosis corrections is emerging as a tangible alternative for the future

Aims

To describe the clinical, radiological, and functional outcomes in patients with isolated congenital thoracolumbar kyphosis who were treated with three-column osteotomy by posterior-only approach.

Aims

The aim of this retrospective study was to compare the correction achieved using a convex pedicle screw technique and a low implant density achieved using periapical concave-sided screws and a high implant density. We hypothesized that there would be no difference in outcome between the two techniques.

Aims

Significant correction of an adolescent idiopathic scoliosis in the coronal plane through a posterior approach is associated with hypokyphosis. Factors such as the magnitude of the preoperative coronal curve, the use of hooks, number of levels fused, preoperative kyphosis, screw density, and rod type have all been implicated. Maintaining the normal thoracic kyphosis is important as hypokyphosis is associated with proximal junctional failure (PJF) and early onset degeneration of the spine. The aim of this study was to determine if coronal correction per se was the most relevant factor in generating hypokyphosis.

Aims

The direct posterior approach with subperiosteal dissection of the paraspinal muscles from the vertebrae is considered to be the standard approach for the surgical treatment of adolescent idiopathic scoliosis (AIS). We investigated whether or not a minimally-invasive surgery (MIS) technique could offer improved results.

Aims

There is little information about the optimum number of implants to be used in the surgical treatment of idiopathic scoliosis. Retrospective analysis of prospectively collected data from the Swedish spine register was undertaken to discover whether more implants per operated vertebra (implant density) leads to a better outcome in the treatment of idiopathic scoliosis. The hypothesis was that implant density is not associated with patient-reported outcomes, the correction of the curve or the rate of reoperation.

Aims

The aim of this study was to report a retrospective, consecutive series of patients with adolescent idiopathic scoliosis (AIS) who were treated with posterior minimally invasive surgery (MIS) with a mean follow-up of two years (sd 1.4; 0.9 to 0 3.7). Our objectives were to measure the correction of the deformity and record the peri-operative morbidity. Special attention was paid to the operating time (ORT), estimated blood loss (EBL), length of stay (LOS) and further complications.

Aims

A total of 30 patients with thoracolumbar/lumbar adolescent idiopathic scoliosis (AIS) treated between 1989 and 2000 with anterior correction and fusion surgery using dual-rod instrumentation were reviewed.

Aim:. To review the use of traction x-rays under anaesthesia in Late Onset Scoliosis to correlate traction x-ray flexibility and postoperative correction using posterior nonsegmental all pedicle screw constructs. Methods:. Prospective study. Preoperative anteroposterior, lateral and side bending x-rays were done and Cobb angles were measured. Intraoperatively, traction anteroposterior x-rays were taken under anaesthesia and Cobb angles were measured. All patients underwent nonsegmental posterior all pedicle screw construct correction using Biomet implants. Cobb angles greater than 60 degees were included in the study. Calculations were done including correction rate, traction flexibility and traction correction index. Results were entered onto an excel spreadsheet and analyzed using Statistica software. Results:. 16 patients were studied, 3 boys and 13 girls, average age 14, ranging from 8 to 17 years. Preoperative Cobb angles were mean 82 (60 to 105) degrees. Traction x-rays mean Cobb angle was 42 degrees with mean traction flexibility rate 49%. Mean correction rate was 65% and mean traction correction index 106. Preoperative Cobb angles correlated with traction flexibility with a p value of 0.01. Traction x-rays Cobb angle correlated with the traction correction index (p = 0.003), postoperative x-rays (p = 0.000) and also with correction rate (p = 0.024). There was no correlation between preoperative Cobb angle and correction rate. Conclusion:. Traction x-rays under anaesthesia in late onset scoliosis are a good predictor of postoperative correction with posterior nonsegmental all pedicle screw constructs in curves greater than 60 degrees

The December 2014 Spine Roundup³⁶⁰ looks at: surgeon outcomes;

complications and scoliosis surgery; is sequestrectomy enough in lumbar disc prolapse?; predicting outcomes in lumbar disc herniation; sympathectomy has a direct effect on the dorsal root ganglion; and distal extensions of fusion in adolescent idiopathic scoliosis.

To present the results of surgical correction in patients with double or triple thoracic/lumbar AIS (Lenke types 2,3,4) with the use of a novel convex/convex unilateral segmental screw correction technique in a single surgeon's prospective series. We reviewed the medical records and spinal radiographs of 92 consecutive patients (72 female-20 male). We measured scoliosis, thoracic kyphosis, lumbar lordosis, scoliosis flexibility and correction index, coronal and sagittal balance before and after surgery, as well as at minimum 2-year follow-up. SRS-22 data was available preoperatively, 6-month, 12-month and 2-year postoperatively for all patients. Surgical technique. All patients underwent posterior spinal fusion using pedicle screw constructs. Unilateral screws were placed across the convexity of each individual thoracic or lumbar curve to allow for segmental correction. ‘Corrective rod’ was the one attached to the convexity of each curve with the correction performed across the main thoracic scoliosis always before the lumbar. Maximum correction of main thoracic curves was always performed, whereas the lumbar scoliosis was corrected to the degree required to achieve a balanced effect across the thoracic and lumbar segments and adequate global coronal spinal balance. Concave screws were not placed across any deformity levels. Bilateral screws across 2 levels caudally and 1–2 levels cephalad provided proximal/distal stability of the construct. Mean age at surgery was 14.9 years with mean Risser grade 2.8. The distribution of scoliosis was: Lenke type 2–26 patients; type 3–43 patients; type 4–23 patients. Mean preoperative Cobb angle for upper thoracic curves was 45°. This was corrected by 62% to mean 17° (p<0.001). Mean preoperative Cobb angle for main thoracic curves was 70°. This was corrected by 69% to mean 22° (p<0.001). Mean preoperative Cobb angle for lumbar curves was 56°. This was corrected by 68% to mean 18° (p<0.001). No patient lost >2° correction at follow-up. Mean preoperative thoracic kyphosis was 34° and lumbar lordosis 46°. Mean postoperative thoracic kyphosis was 45° (p<0.001) and lumbar lordosis 46.5° (p=0.69). Mean preoperative coronal imbalance was 1.2 cm. This corrected to mean 0.02 cm at follow-up (p<0.001). Mean preoperative sagittal imbalance was −2 cm. This corrected to mean −0.1 cm at follow-up (p<0.001). Mean theatre time was 187 minutes, hospital stay 6.8 days and intraoperative blood loss 0.29 blood volumes (1100 ml). Intraoperative spinal cord monitoring was performed recording cortical and cervical SSEPs and transcranial upper/lower limb MEPs and there were no problems. None of the patients developed neurological complications, infection or detected non-union and none required revision surgery to address residual or recurrent deformity. Mean preoperative SRS-22 score was 3.6; this improved to 4.6 at follow-up (p<0.001). All individual parameters also demonstrated significant improvement (p<0.001) with mean satisfaction rate at 2-year follow-up 4.9. The convex-convex unilateral pedicle screw technique can reduce the risk of neurological injury during major deformity surgery as it does not require placement of screws across the deformed apical concave pedicles which are in close proximity to the spinal cord. Despite the use of a lesser number of pedicle fixation points compared to the bilateral segmental screw techniques, in our series it has achieved satisfactory scoliosis correction and restoration of global coronal and sagittal balance with improved thoracic kyphosis and preserved lumbar lordosis. These results have been associated with excellent patient satisfaction and functional outcomes as demonstrated through the SRS-22 scores

The August 2014 Spine Roundup³⁶⁰ looks at: rhBMP complicates cervical spine surgery; posterior longitudinal ligament revisited; thoracolumbar posterior instrumentation without fusion in burst fractures; risk modelling for VTE events in spinal surgery; the consequences of dural tears in microdiscectomy; trends in revision spinal surgery; radiofrequency denervation likely effective in facet joint pain and hooks optimally biomechanically transition posterior instrumentation.

We describe 13 patients with cerebral palsy and lordoscoliosis/hyperlordosis of the lumbar spine who underwent a posterior spinal fusion at a mean age of 14.5 years (10.8 to 17.4) to improve sitting posture and relieve pain. The mean follow-up was 3.3 years (2.2 to 6.2).

The mean pre-operative lumbar lordosis was 108^° (80 to 150^°) and was corrected to 62^° (43^° to 85^°); the mean thoracic kyphosis from 17^° (-23^° to 35^°) to 47^° (25^° to 65^°); the mean scoliosis from 82^° (0^° to 125^°) to 22^° (0^° to 40^°); the mean pelvic obliquity from 21^° (0^° to 38^°) to 3^° (0^° to 15^°); the mean sacral slope from 79^° (54^° to 90^°) to 50^° (31^° to 66^°). The mean pre-operative coronal imbalance was 5 cm (0 cm to 8.9 cm) and was corrected to 0.6 cm (0 to 3.2). The mean sagittal imbalance of -8 cm (-16 cm to 7.8 cm) was corrected to -1.6 cm (-4 cm to 2.5 cm). The mean operating time was 250 minutes (180 to 360 minutes) and intra-operative blood loss 0.8 of estimated blood volume (0.3 to 2 estimated blood volume). The mean intensive care and hospital stay were 3.5 days (2 to 8) and 14.5 days (10 to 27), respectively. Three patients lost a significant amount of blood intra-operatively and subsequently developed chest or urinary infections and superior mesenteric artery syndrome.

An increased pre-operative lumbar lordosis and sacral slope were associated with increased peri-operative morbidity: scoliosis and pelvic obliquity were not. A reduced lumbar lordosis and increased thoracic kyphosis correlated with better global sagittal balance at follow-up. All patients and their parents reported excellent surgical outcomes.

Lordoscoliosis and hyperlordosis are associated with significant morbidity in quadriplegic patients. They are rare deformities and their treatment is challenging. Sagittal imbalance is the major component: it can be corrected by posterior fusion of the spine with excellent functional results.

Cite this article: Bone Joint J 2014;96-B:800–6.

Aim:. To evaluate the effect of a stiffer rod in normalising thoracic hypokyphosis in adolescent idiopathic scoliosis (AIS). Methods:. A retrospective review of AIS cases performed at our institution was carried out. In order to reduce variability, the analysis included only Lenke 1 cases which had all pedicle screw constructs, with similar constructs and implant density. Cases that underwent anterior release were excluded. All cases had the same implant (Expedium 5.5, Depuy-Synthes, Raynham, USA). The rod material differed in that some cases had 5.5 titanium, whilst others had 5.5 cobalt chrome. The preoperative and postoperative sagittal Cobb angle was measured. Results:. 35 patients met the inclusion criteria. 15 had titanium rods and 20 had cobalt chrome rods. The mean fulcrum correction index was similar between groups. The preoperative coronal and sagittal Cobb was similar between the two groups. There was no statistically significant difference in the postoperative sagittal Cobb between the two groups (ANOVA one way test). Discussion:. Despite the theoretical advantage of a stiffer construct improving the sagittal profile in AIS, this study identified no such benefit despite closely matching the two groups. All pedicle screw constructs do not seem to improve the sagittal profile despite the use of a stiffer rod. Conflict of interest:. Depuy-Synthes fund a fellow in this unit. Conflict Of Interest Statement: No conflict of interest

Aim:. To compare the ability of fulcrum bend and traction radiographs to predict correction of AIS using pedicle screw only constructs and to compare the fulcrum bending correction index (FBCI) with a new measurement: the traction correction index (TCI). Method:. Retrospective radiographic analysis of eighty patients, average age 14 yrs, who underwent posterior correction of scoliosis using pedicle screw only construct. Analysis was carried out on the pre-op and immediate post-op PA radiographs and the pre-op fulcrum bend and traction radiographs. Correction rate, fulcrum flexibility, traction flexibility, FBCI and TCI was calculated. Results:. Preoperative mean Cobb angle of 63.9 degrees was corrected to 25.8 degrees postoperatively. The mean fulcrum bending Cobb angle was 37.6 degrees and traction Cobb angle 26.6 degrees. The mean fulcrum flexibility was 41.1%, traction flexibility 58.4% and correction rate 59.6%. The mean FBCI was 144.9% and TCI was 102.1%. Discussion:. Radiographic correction of scoliosis based on correction rate does not take into consideration the curve flexibility. It has been suggested by Cheung et al, that fulcrum bending radiographs predict curve correction in AIS. Ibrahim et al, have questioned this, and they suggested that traction radiographs are more predictive in a mixed group of patients with hybrid and screw only constructs. Conclusions:. When comparing fulcrum bend and traction radiographs, we found the latter to be more predictive of curve correction in AIS using pedicle screw constructs. The TCI better takes into account the curve flexibility than the FBCI. Conflict Of Interest Statement: No conflict of interest

The June 2013 Spine Roundup³⁶⁰ looks at: the benefit of MRI in the follow-up of lumbar disc prolapse; gunshot injury to the spinal cord; the link between depression and back pain; floating dural sack sign; short segment fixation at ten years; whether early return to play is safer than previously thought; infection in diabetic spinal patients; and dynesis.