Aims

The aims of this study were to determine the change in pelvic sagittal alignment before, during, and after total hip arthroplasty (THA) undertaken with the patient in the lateral decubitus position, and to determine the impact of these changes on acetabular component position.

Aims

The anterior pelvic internal fixator is increasingly used for the treatment of unstable, or displaced, injuries of the anterior pelvic ring. The evidence for its use, however, is limited. The aim of this paper is to describe the indications for its use, how it is applied and its complications.

The October 2015 Trauma Roundup³⁶⁰ looks at: PCA not the best in resuscitation; Impact of trauma centre care; Quality of life after a hip fracture; Recovery and severity of injury: open tibial fractures in the spotlight; Assessment of the triplane fractures; Signs of an unstable paediatric pelvis; Safe insertion of SI screws: are two views required?; Post-operative delirium under the spotlight; Psychological effects of fractures; K-wires cost effective in DRAFFT

We hypothesised that the anterior and posterior walls of the body of the first sacral vertebra could be visualised with two different angles of inlet view, owing to the conical shape of the sacrum. Six dry male cadavers with complete pelvic rings and eight dry sacrums with K-wires were used to study the effect of canting (angling the C-arm) the fluoroscope towards the head in 5° increments from 10° to 55°. Fluoroscopic images were taken in each position. Anterior and posterior angles of inclination were measured between the upper sacrum and the vertical line on the lateral view. Three authors separately selected the clearest image for overlapping anterior cortices and the upper sacral canal in the cadaveric models. The dry bone and K-wire models were scored by the authors, being sure to check whether the K-wire was in or out. In the dry bone models the mean score of the relevant inlet position of the anterior or posterior inclination was 8.875 (standard deviation (. sd. ) 0.35), compared with the inlet position of the opposite inclination of –5.75 (. sd. 4.59). We found that two different inlet views should be used separately to evaluate the borders of the body of the sacrum using anterior and posterior inclination angles of the sacrum, during placement of iliosacral screws. Cite this article: Bone Joint J 2015;97-B:705–10

Introduction. Pelvic and acetabular injuries are relatively rare and surgical reconstruction usually occurs only in specialist centres. As part of their work up there is a local protocol for radiological investigations including Judet oblique views for acetabular fractures, pelvic inlet and outlet for pelvic ring fractures and urethrograms for sustaining anterior pelvic injury. The aim of this service evaluation was to assess whether patients had these radiological investigations prior to transfer. Methods. The last 50 patients transferred for surgery were evaluated (41 male, 9 female), average age 48 (range 17–86). Four were excluded as original radiology not available and one due to non-acute presentation. Regional PACS systems were accessed and radiological investigations recorded. Results. Transfers were from 17 different hospitals including 27 acetabular fractures, 17 pelvic ring fractures and one patient with both. 22 patients sustained isolated injuries. 16 patients were investigated radiologically asstipulated in the protocol. No inlet/outlet views were performed for 10 of the ring fractures, and no Judet views for eight of the acetabular fractures. An antero-posterior pelvic radiograph was not performed on one patient. No urethro/cystogram was performed for 10 pelvic ring fractures. Average time to transfer 5.4 days (range 0–22). Discussion. A significant proportion of patients are not assessed as per protocol prior to transfer. This can lead to undetected injuries, delays to diagnosis or definitive management and increased morbidity/mortality. The reasons for not being able to perform these investigations need to be understood

We investigated whether lateral compression type I injuries of the pelvic ring are inheritably mechanically stable. Between January 2005 to January 2007 all consecutive admissions of a tertiary referral center for pelvic ring reconstruction with a LC I injury pattern were eligible for inclusion. Exclusion criteria were other patterns of pelvic ring injuries. All patients underwent radiological assessment including AP pelvis, inlet/outlet views and CT. Patient demographics, mechanism of injury, other associated injuries, ISS, length of hospitalisation, type of operation, mode of mobilization, preoperative and postoperative visual analogue score pain VAS and follow up until fracture union were prospectively documented. Mechanical stability of the pelvic ring was assessed in the operating theatre under general anaesthesia. Instability was defined as displacement > 2 cm of the anterior or posterior elements. The minimum follow up was 12 months. Of 210 patients admitted with pelvic fractures, 40 fulfilled the inclusion criteria (LC1 type). There were 23 female 17 male and with a mean age of 33.5 (range 18–68). The mean ISS was 10 (range 9–19). 23 patients (group 1) were found to have more than 2 cm rotational displacement during EUA and were stabilised with SI screws posteriorly and a combination of retro-pubic screws, external fixator or plating anteriorly. 17 patients (group 2) exhibited minimal displacement less than 5mm and were not stabilised. Rotational instability > 2cm was characterised by complete fracture of the sacrum posteriorly. Stabilisation of the pelvic ring in group I was associated with a significant reduction of the VAS within 72 hours from surgery, early ambulation and discharge from the hospital. This study supports the view that not all LCI fracture patterns are mechanically stable. Examination under anaesthesia of the pelvic ring can assist the clinician in the decision making progress

High energy fractures of the pelvis are a challenging problem both in the immediate post-injury phase and later when definitive fixation is undertaken. No single management algorithm can be applied because of associated injuries and the wide variety of trauma systems that have evolved around the world.

Initial management is aimed at saving life and this is most likely to be achieved with an approach that seeks to identify and treat life-threatening injuries in order of priority. Early mortality after a pelvic fracture is most commonly due to major haemorrhage or catastrophic brain injury. In this article we review the role of pelvic binders, angiographic embolisation, pelvic packing, early internal fixation and blood transfusion with regard to controlling haemorrhage.

Definitive fixation seeks to prevent deformity and reduce complications. We believe this should be undertaken by specialist surgeons in a hospital resourced, equipped and staffed to manage the whole spectrum of major trauma. We describe the most common modes of internal fixation by injury type and review the factors that influence delayed mortality, adverse functional outcome, sexual dysfunction and venous thromboembolism.

Aim: To investigate whether lateral compression type I injuries of the pelvic ring are inheritably mechanically stable. Patients and Methods: Between January 2005 to January 2007 all consecutive admissions of a tertiary referral center for pelvic ring reconstruction with a LC I injury pattern were eligible for inclusion. Exclusion criteria were other patterns of pelvic ring injuries. All patients underwent radiological assessment including AP pelvis, inlet/outlet views and CT. Patient demographics, mechanism of injury, other associated injuries, ISS, length of hospitalisation, type of operation, mode of mobilization, preoperative and postoperative visual analogue score pain VAS and follow up until fracture union were prospectively documented. Mechanical stability of the pelvic ring was assessed in the operating theatre under general anaesthesia. Instability was defined as displacement > 2 cm of the anterior or posterior elements. The minimum follow up was 12 months. Results: Out of 210 patients admitted with pelvic fractures, 40 fulfilled the inclusion criteria (LC1 type). There were 23 female 17 male and with a mean age of 33.5 (range 18–68). The mean ISS was 10 (range 9–19). 23 patients (group 1) were found to have more than 2 cm rotational displacement during EUA and were stabilised with SI screws posteriorly and a combination of retropubic screws, external fixator or plating anteriorly. 17 patients (group 2) exhibited minimal displacement less than 5mm and were not stabilised. Rotational instability > 2cm was characterised by complete fracture of the sacrum posteriorly. Stabilisation of the pelvic ring in group I was associated with a significant reduction of the VAS within 72 hours from surgery, early ambulation and discharge from the hospital. Conclusion: This study supports the view that not all LCI fracture patterns are mechanically stable. Examination under anaesthesia of the pelvic ring can assist the clinician in the decision making progress

Fluoronavigation is an image-guided technology which uses intra-operative fluoroscopic images taken under a real-time tracking system and registration to guide surgical procedures. With the skeleton and the instrument registered, guidance under an optical tracking system is possible, allowing fixation of the fracture and insertion of an implant. This technology helps to minimise exposure to x-rays, providing multiplanar views for monitoring and accurate positioning of implants. It allows real-time interactive quantitative data for decision-making and expands the application of minimally invasive surgery. In orthopaedic trauma its use can be further enhanced by combining newer imaging technologies such as intra-operative three-dimensional fluoroscopy and optical image guidance, new advances in software for fracture reduction, and new tracking mechanisms using electromagnetic technology. The major obstacles for general and wider applications are the inability to track individual fracture fragments, no navigated real-time fracture reduction, and the lack of an objective assessment method for cost-effectiveness.

We believe that its application will go beyond the operating theatre and cover all aspects of patient management, from pre-operative planning to intra-operative guidance and postoperative rehabilitation.

We reviewed 15 consecutive patients, 11 women and four men, with a mean age of 48.7 years (37.3 to 62.6), who between July 2004 and August 2007 had undergone percutaneous sacroiliac fusion using hollow modular anchorage screws filled with demineralised bone matrix.

Each patient was carefully assessed to exclude other conditions and underwent pre-operative CT and MR scans. The diagnosis of symptomatic sacroiliac disease was confirmed by an injection of local anaesthetic and steroid under image intensifier control.

The short form-36 questionnaire and Majeed’s scoring system were used for pre- and post-operative functional evaluation. Post-operative radiological evaluation was performed using plain radiographs.

Intra-operative blood loss was minimal and there were no post-operative clinical or radiological complications. The mean follow-up was for 17 months (9 to 39). The mean short form-36 scores improved from 37 (23 to 51) to 80 (67 to 92) for physical function and from 53 (34 to 73) to 86 (70 to 98) for general health (p = 0.037). The mean Majeed’s score improved from 37 (18 to 54) pre-operatively to 79 (63 to 96) post-operatively (p = 0.014). There were 13 good to excellent results. The remaining two patients improved in short form-36 from a mean of 29 (26 to 35) to 48 (44 to 52). Their persistent pain was probably due to concurrent lumbar pathology.

We conclude that percutaneous hollow modular anchorage screws are a satisfactory method of achieving sacroiliac fusion.

Sacral insufficiency fractures are traditionally treated with bed rest and analgesia. The importance of early rehabilitation is generally appreciated; but pain frequently delays this, resulting in prolonged hospital stay and the risk of complications related to immobility. We describe three women with sacral insufficiency fractures who were treated with percutaneous sacroiliac screws and followed up for a mean of 18 months (12 to 24). They had immediate pain relief, uncomplicated rehabilitation and uneventful healing.

With the development of systems of trauma care the management of pelvic disruption has evolved and has become increasingly refined. The goal is to achieve an anatomical reduction and stable fixation of the fracture. This requires adequate visualisation for reduction of the fracture and the placement of fixation. Despite the advances in surgical approach and technique, the functional outcomes do not always produce the desired result. New methods of percutaneous treatment in conjunction with innovative computer-based imaging have evolved in an attempt to overcome the existing difficulties. This paper presents an overview of the technical aspects of percutaneous surgery of the pelvis and acetabulum.

Because there are a number of complicating factors, total hip arthroplasty (THA) performed following acetabular fractures has a less favourable prognosis than when done for primary degenerative arthritis. Patients who have had ace-tabular fracture and present for consideration of THA need careful clinical and radiological assessment. Investigation should include AP and lateral radiographs, 45° inlet/outlet views, obturator and iliac obliques, Judet views and CT scan, with or without 3D reconstruction. There are various classifications defining whether the bone deficiency is contained or uncontained and the extent of the structural defect. Treatment options include autograft, allograft together with mesh, screws, plates, rings, cages, etc. It is probably preferable to undertake THA sooner (as soon as there is radiological evidence of incongruent articular surfaces) rather than later, as this reduces the delay between fracture and recovery from THA, and any inadequate reduction can be minimised or corrected. The surgical approach must allow adequate access for the intended reconstruction. Small contained or uncontained defects can be treated with cemented or cementless implants and limited grafting. Large defects require structural reinforcement, bone grafting, a retaining cage and, unless a custom-made implant is used, cemented fixation. Potential problems at the time of surgery include sciatic nerve injury (beware the ‘double crush syndrome’) obstructive hardware, heterotopic ossification, avascular necrosis of the acetabulum and occult infection. Patients who are elderly or who present with markedly impacted fracture, extensive abrasion or fracture of the femoral head, displaced femoral neck fracture, and extensive acetabular comminution in the presence of osteopoenic bone, may warrant acute management with THA. Early experience of THA in the treatment of selected acute fractures is encouraging. However, the clinical results of THA after fractures of the acetabulum are often disappointing, and there is no current evidence that open reduction and internal fixation improves the success of the subsequent THA. THA following acetabular fractures is a challenging procedure with a high complication rate. Appropriate investigation and preoperative planning reduces the risk of complications