Aims

Spinopelvic pathology increases the risk for instability following total hip arthroplasty (THA), yet few studies have evaluated how pathology varies with age or sex. The aims of this study were: 1) to report differences in spinopelvic parameters with advancing age and between the sexes; and 2) to determine variation in the prevalence of THA instability risk factors with advancing age.

Aims

The aim of this study was to evaluate the reliability and validity of a patient-specific algorithm which we developed for predicting changes in sagittal pelvic tilt after total hip arthroplasty (THA).

In 2021, Vigdorchik et al. published a large multicentre study validating their simple Hip-Spine Classification for determining patient-specific acetabular component positioning in total hip arthroplasty (THA). The purpose of our study was to apply this Hip-Spine Classification to a sample of Australian patients undergoing THA surgery to determine the local acetabular component positioning requirements. Additionally, we propose a modified algorithm for adjusting cup anteversion requirements. 790 patients who underwent THA surgery between January 2021 and June 2022 were assessed for anterior pelvic plane tilt (APPt) and sacral slope (SS) in standing and relaxed seated positions and categorized according to their spinal stiffness and flatback deformity. Spinal stiffness was measured using pelvic mobility (PM); the ΔSS between standing and relaxed seated. Flatback deformity was defined by APPt <-13° in standing. As in Vigdorchik et al., PM of <10° was considered a stiff spine. For our algorithm, PM of <20° indicated the need for increased cup anteversion. Using this approach, patient-specific cup anteversion is increased by 1° for every degree the patient's PM is <20°. According to the Vigdorchik simple Hip-Spine classification groups, we found: 73% Group 1A, 19% Group 1B, 5% Group 2A, and 3% Group 2B. Therefore, under this classification, 27% of Australian THA patients would have an elevated risk of dislocation due to spinal deformity and/or stiffness. Under our modified definition, 52% patients would require increased cup anteversion to address spinal stiffness. The Hip-Spine Classification is a simple algorithm that has been shown to indicate to surgeons when adjustments to acetabular cup anteversion are required to account for spinal stiffness or flatback deformity. We investigated this algorithm in an Australian population of patients undergoing THA and propose a modified approach: increasing cup anteversion by 1° for every degree the patient's PM is <20°

Aims

Pelvic incidence (PI) is a position-independent spinopelvic parameter traditionally used by spinal surgeons to determine spinal alignment. Its relevance to the arthroplasty surgeon in assessing patient risk for total hip arthroplasty (THA) instability preoperatively is unclear. This study was undertaken to investigate the significance of PI relative to other spinopelvic parameter risk factors for instability to help guide its clinical application.

Aims

Pelvic tilt (PT) can significantly change the functional orientation of the acetabular component and may differ markedly between patients undergoing total hip arthroplasty (THA). Patients with stiff spines who have little change in PT are considered at high risk for instability following THA. Femoral component position also contributes to the limits of impingement-free range of motion (ROM), but has been less studied. Little is known about the impact of combined anteversion on risk of impingement with changing pelvic position.

Aims. Patients with spinal pathology who undergo total hip arthroplasty (THA) have an increased risk of dislocation and revision. The aim of this study was to determine if the use of the Hip-Spine Classification system in these patients would result in a decreased rate of postoperative dislocation in patients with spinal pathology. Methods. This prospective, multicentre study evaluated 3,777 consecutive patients undergoing THA by three surgeons, between January 2014 and December 2019. They were categorized using The Hip-Spine Classification system: group 1 with normal spinal alignment; group 2 with a flatback deformity, group 2A with normal spinal mobility, and group 2B with a stiff spine. Flatback deformity was defined by a pelvic incidence minus lumbar lordosis of > 10°, and spinal stiffness was defined by < 10° change in sacral slope from standing to seated. Each category determined a patient-specific component positioning. Survivorship free of dislocation was recorded and spinopelvic measurements were compared for reliability using intraclass correlation coefficient. Results. A total of 2,081 patients met the inclusion criteria. There were 987 group 1A, 232 group 1B, 715 group 2A, and 147 group 2B patients. A total of 70 patients had a lumbar fusion, most had L4-5 (16; 23%) or L4-S1 (12; 17%) fusions; 51 patients (73%) had one or two levels fused, and 19 (27%) had > three levels fused. Dual mobility (DM) components were used in 166 patients (8%), including all of those in group 2B and with > three level fusions. Survivorship free of dislocation at five years was 99.2% with a 0.8% dislocation rate. The correlation coefficient was 0.83 (95% confidence interval 0.89 to 0.91). Conclusion. This is the largest series in the literature evaluating the relationship between hip-spine pathology and dislocation after THA, and guiding appropriate treatment. The Hip-Spine Classification system allows surgeons to make appropriate evaluations preoperatively, and it guides the use of DM components in patients with spinopelvic pathology in order to reduce the risk of dislocation in these high-risk patients. Cite this article: Bone Joint J 2021;103-B(7 Supple B):17–24

Introduction. Patients with reduced lumbar spine mobility are at higher risk of dislocation after THA as their hips have to compensate for spinal stiffness. Therefore our study aimed to 1) Define the optimal protocol for identifying patients with mobile hips and stiff lumbar spines and 2) Determine clinical and standing radiographic parameters predicting high hip and reduced lumbar spine mobility. Methods. This prospective diagnostic cohort study followed 113 consecutive patients with end-stage hip osteoarthritis (OA) awaiting THA. Radiographic measurements were performed for the lumbar lordosis angle, pelvic tilt and pelvic-femoral angle on lateral radiographs in the standing, ‘relaxed-seated’ and ‘deep-seated’ (i.e. torso maximally leaning forward) position. A “hip user index” was calculated in order to quantify the contribution of the hip joint to the overall sagittal movement performed by the femur, pelvis and lumbar spine. Results. Radiographs in the relaxed-seated position had an accuracy of 56% (95%CI:46–65%) to detect patients with stiff lumbar spines, compared to a detected rate of 100% in the deep-seated position. The mean ‘hip user index’ was 63±12% and ten patients (9%) were hip users, having an index of 80% or more. A standing pelvic tilt of ≥18.5° was the only predictor for being a hip user with a sensitivity of 90% and specificity of 71% (AUC 0.83). Patients with a standing pelvic tilt ≥18.5° and an unbalanced spine with a flatback deformity had a 30xfold relative risk (95%-CI:4–226; p<0.001) of being a hip user. Conclusion. Patients awaiting THA and having high hip and reduced lumbar spine mobility can be screened for with lateral standing radiographs of the spinopelvic complex and a thorough clinical examination. If the initial screening is positive, radiographs in the deep-seated position allow for better identification of patients being ‘hip users’ compared to radiographs in the relaxed-seated position

Aims. The aim of this study was to determine the influence of pelvic parameters on the tendency of patients with adolescent idiopathic scoliosis (AIS) to develop flatback deformity (thoracic hypokyphosis and lumbar hypolordosis) and its effect on quality-of-life outcomes. Patients and Methods. This was a radiological study of 265 patients recruited for Boston bracing between December 2008 and December 2013. Posteroanterior and lateral radiographs were obtained before, immediately after, and two-years after completion of bracing. Measurements of coronal and sagittal Cobb angles, coronal balance, sagittal vertical axis, and pelvic parameters were made. The refined 22-item Scoliosis Research Society (SRS-22r) questionnaire was recorded. Association between independent factors and outcomes of postbracing ≥ 6° kyphotic changes in the thoracic spine and ≥ 6° lordotic changes in the lumbar spine were tested using likelihood ratio chi-squared test and univariable logistic regression. Multivariable logistic regression models were then generated for both outcomes with odds ratios (ORs), and with SRS-22r scores. Results. Reduced T5-12 kyphosis (mean -4.3° (. sd. 8.2); p < 0.001), maximum thoracic kyphosis (mean -4.3° (. sd. 9.3); p < 0.001), and lumbar lordosis (mean -5.6° (. sd. 12.0); p < 0.001) were observed after bracing treatment. Increasing prebrace maximum kyphosis (OR 1.133) and lumbar lordosis (OR 0.92) was associated with postbracing hypokyphotic change. Prebrace sagittal vertical axis (OR 0.975), prebrace sacral slope (OR 1.127), prebrace pelvic tilt (OR 0.940), and change in maximum thoracic kyphosis (OR 0.878) were predictors for lumbar hypolordotic changes. There were no relationships between coronal deformity, thoracic kyphosis, or lumbar lordosis with SRS-22r scores. Conclusion. Brace treatment leads to flatback deformity with thoracic hypokyphosis and lumbar hypolordosis. Changes in the thoracic spine are associated with similar changes in the lumbar spine. Increased sacral slope, reduced pelvic tilt, and pelvic incidence are associated with reduced lordosis in the lumbar spine after bracing. Nevertheless, these sagittal parameter changes do not appear to be associated with worse quality of life. Cite this article: Bone Joint J 2019;101-B:1370–1378

Aims

While previously underappreciated, factors related to the spine contribute substantially to the risk of dislocation following total hip arthroplasty (THA). These factors must be taken into consideration during preoperative planning for revision THA due to recurrent instability. We developed a protocol to assess the functional position of the spine, the significance of these findings, and how to address different pathologies at the time of revision THA.

There remains confusion in the literature with regard to the spinopelvic relationship, and its contribution to ideal acetabular component position. Critical assessment of the literature has been limited by use of conflicting terminology and definitions of new concepts that further confuse the topic. In 2017, the concept of a Hip-Spine Workgroup was created with the first meeting held at the American Academy of Orthopedic Surgeons Annual Meeting in 2018. The goal of this workgroup was to first help standardize terminology across the literature so that as a topic, multiple groups could produce literature that is immediately understandable and applicable. This consensus review from the Hip-Spine Workgroup aims to simplify the spinopelvic relationship, offer hip surgeons a concise summary of available literature, and select common terminology approved by both hip surgeons and spine surgeons for future research.

Cite this article: Bone Joint J 2019;101-B:808–816.

INTRODUCTION. Standing spinal alignment has been the center of focus recently, particularly in the setting of adult spinal deformity. Humans spend approximately half of their waking life in a seated position. While lumbopelvic sagittal alignment has been shown to adapt from standing to sitting posture, segmental vertebral alignment of the entire spine is not yet fully understood, nor are the effects of DEGEN or DEFORMITY. Segmental spinal alignment between sitting and standing, and the effects of degeneration and deformity were analyzed. METHODS. Segmental spinal alignment and lumbopelvic alignment (pelvic tilt (PT), pelvic incidence (PI), lumbar lordosis (LL), PI-LL, sacral slope) were analyzed. Lumbar spines were classified as NORMAL, DEGEN (at least one level of disc height loss >50%, facet arthropathy, or spondylolisthesis), or DEFORMITY (PI-LL mismatch>10°). Exclusion criteria included lumbar fusion/ankylosis, hip arthroplasty, and transitional lumbosacral anatomy. Independent samples t-tests analyzed lumbopelvic and segmental alignment between sitting and standing within groups. ANOVA assessed these differences between spine pathology groups. RESULTS. There were 183 NORMAL, 216 DEGEN and 92 DEFORMITY patients with significant differences in age, gender, and hip OA grades. After propensity matching for these factors, there were 56 patients in each group (age 63±14, 58% female) [Fig. 1]. Significant differences were noted between spinal pathology groups with regard to changes from standing to sitting alignment with regard to NORMAL vs DEGEN vs DEFORMITY groups in PT (13.93° vs −11.98° vs − 7.95°; p=0.024), LL (21.91° vs 17.45° vs 13.23°; p=0.002), PI-LL (−22.32° vs −17.28° vs −13.18°; p<0.001), SVA (−48.99° vs −29.98° vs −32.12°; p=0.002), and TPA(−16.35° vs −12.69° vs −9.64; p=0.001). TK (−2.08° vs −2.78° vs −2.00°, p=0.943) and CL (−3.84° vs −4.14° vs −3.57°, p=0.621) were not significantly different across spinal pathology groups [Fig. 2]. NORMAL patients had overall greater mobility in the lower lumbar spine from standing to sitting compared to DEGEN and DEFORMITY patients. L4-L5 (7.50° vs 5.23° vs 4.74°, p=0.012) and L5-S1 (6.96° vs 5.28° and 3.69°, p=0.027). There were no significant differences in change in alignment from standing to sitting at the upper lumbar levels or lower thoracic levels between the three groups [Fig. 3]. CONCLUSION. The lower lumbar spine provides the greatest sitting to standing change in lumbopelvic alignment in normal patients. Degeneration and deformity of the spine significantly reduces the mobility of the lower lumbar spine and PT. With lumbar spine degeneration and flatback deformity, relatively more alignment change occurs at the upper lumbar spine and thoracolumbar junction

Aims

The aims of this study were to measure sagittal standing and sitting lumbar-pelvic-femoral alignment in patients before and following total hip arthroplasty (THA), and to consider what preoperative factors may influence a change in postoperative pelvic position.

Objective. To determine if there is a differing effect between two spinal implant systems on sagittal balance and thoracic kyphosis in adolescent idiopathic scoliosis. Methods. Retrospective analysis of pre and post-operative radiographs to assess sagittal balance, C7-L1 kyphosis angles and metal implant density. Group 1 (Top loading system): 11 patients (9 females, 2 males) Single surgeon NB. Group 2 (Side loading system): 17 patients (16 females, 1 male) Single surgeon ED. Total 28 patients. All single right sided thoracic curves. Comparison of pre and postoperative sagittal balance and C7-L1 kyphosis angle for each spinal system. Assessment of implant density (i.e. proportion of pedicle screw relative to number of spinal levels involved in correction). Results. 16 patients demonstrated improved sagittal balance following surgery. There was no significant difference between the pre and post op C7-L1 kyphosis angle in either group (p value 0.06 and 0.83 respectively) although a greater discrepancy was noted in Group 1. In group 1, the mean angle pre op was 33.1 (95% CI 27.3 to 38.9) and post op was 26.2 (95% CI 22.5 to 29.9). In Group 2, the mean angle pre op was 28.9 (95% CI 20.3 to 37.5) and post op was 29.6 (95% CI 22.2 to 37.0). No correlation identified between sagittal balance correction and kyphosis angle. Metal density ranged from 60-100%. Conclusions. Although the numbers in this series are modest they do suggest that high density metal implants do not lead to a flatback deformity in the sagittal plane. There is no significant difference in the pre and post op kyphosis angles for either implant system used in this study although the results for Group 1 do approach statistical significance. Larger prospective multicentre studies are required to quantify the true significance of these results. Ethics Approval: Audit/Service Standard in Trust

To determine if the use of high density implants (i.e. high proportion of pedicle screws relative to number of spinal levels involved) causes significant loss of thoracic kyphosis and its effect on sagittal balance in adolescent idiopathic scoliosis.

Retrospective analysis of pre and post-operative radiographs to assess sagittal balance and C7-L1 kyphosis angle.

17 patients (16 females, 1 male). All right sided single thoracic curves. All surgery performed by single surgeon (Senior author, ED)

Comparison of pre and post operative sagittal balance and C7-L1 kyphosis angle. Assessment of implant density (i.e. proportion of pedicle screw relative to number of spinal levels involved in correction).

9 patients demonstrated improved sagittal balance following surgery. There was no significant difference (p value 0.83) between the pre and post op C7-L1 kyphosis angle. Mean angle pre op 28.9 (95% CI 20.3 to 37.5). Mean angle post op 29.6 (95% CI 22.2 to 37.0). No correlation identified between sagittal balance correction and kyphosis angle. Metal density ranged from 79-100%.

Although the sample size in this series is modest, high density implants do not significantly affect the kyphosis angle in the operative management of adolescent idiopathic scoliosis in the thoracic spine.