Sequelae of Legg-Calve -Perthes disease (LCPD) and treatment of developmental dysplasia of the hip (DDH) can present a coxa breva or coxa magna deformity, sometimes associated with coxa vara. This unique deformity decreases the efficiency of the abductor mechanism, causing a Trendelenburg gait and hip pain, leg length discrepancy and leads to intra- and extra-articular impingement, and eventually osteoarthritis. Several surgical techniques have been advocated to treat this kind deformity, such as great trochanter transfer, relative femoral neck lengthening. We evaluated primary results of true femoral neck-lengthening osteotomy (TFNLO) in combination with periacetabular osteotomy (PAO) for treatment of Coxa Breva through surgical hip dislocation (SHD). Fourteen patients with Coxa Breva received true femoral neck lengthening osteotomy in combination of PAO through SHD between March 2020 and October 2023. Ten patients with minimum 1 year followed-up were retrospectively reviewed clinically and radiographically. Eight patients had Perthes disease, 2 had DDH received closed reduction and fixation during childhood. The mean age at surgery was 16 years (range, 12 to 31 years). Clinical findings, radiographic analyses including the change in horizontal femoral offset and the leg length discrepancy as well as complications were assessed. Horizontal femoral offset improved 19.5mm(6–28mm). Limb length increase 16.8mm(11–30mm). Mean HHS increased from 80.6(66–91) to 91.8(88–96). Complication: screw broken in 1(no need operation). Asymptomatic fibrous union of the great trochanter was found in 1. No infection and joint space narrow as well as nerve palsy happened. TFNLO combined with PAO can be effective for the treatment of patients with Coxa breva. But long term follow up is warranted

Ulnar shortening osteotomy (USO) is a procedure performed to alleviate ulnar sided wrist pain caused by ulnar impaction syndrome (UIS) and/or triangular fibrocartilage complex (TFCC) injury. Presently, non-union rates for ulnar shortening osteotomy is quoted to be 0–18% in the literature. However, there is a dearth of literature on the effect of site of osteotomy and plate placement on the rate of complications like a delayed union, symptomatic hardware and need for second surgery for hardware removal. In this study, we performed a multi-centered institutional review of ulnar shortening osteotomies performed, focusing on plate placement (volar vs. dorsal) and osteotomy site (distal vs. proximal) and determining if it plays a role in reducing complications. This study was a multi-centered retrospective chart review. All radiographs and charts for patients that have received USO for UIS or TFCC injury between 2013 and 2017 from hand and wrist fellowship-trained surgeons in Calgary, Alberta and Winnipeg, Manitoba were examined. Basic patient demographics including age, sex, past medical history, and smoking history were recorded. Postoperative complications such as delayed union, non-union, infection, chronic regional pain syndrome, hardware irritation requiring removal were evaluated with a two-year follow-up period. Osteotomy sites were analyzed based on the location in relation to the entire length of the ulna on forearm radiographs. Surgical techniques including volar vs. dorsal plating, oblique vs. transverse osteotomy cuts, and plate type were documented. Continuous variables of interest were summarized as mean or medians with standard deviation or inter-quartile range as appropriate. Differences in baseline characteristics were determined by t-test or one-way ANOVA for continuous variables and chi-square or Fischer exact test for dichotomous variables. All analyses were conducted using SPSS V24.0 (Chicago, IL, USA). All statistical tests were considered significant if p < 0.05. Between 2013–2017 there were 117 ulnar shortening osteotomies performed. The average age of patients was 46.2 ± 16.2, with 62.4% being female. The mean pre-operative ulnar variance was +3.89 ± 2.17 mm and post-operative ulnar variance was −1.90 ± 1.80 mm. 84.6% of the plates were placed on the volar aspect of the ulna and 14.5% were placed on the dorsal aspect. An oblique osteotomy was made 99.1% of the time. In measuring osteotomy placement, the average placement was made in the distal 1/3 of the ulna. Overall, there was a 40% complication rate. Hardware irritation requiring removal encompassed 23%, non-union 14%, and wound infection covered 0.8%. When comparing dorsal vs volar plating, there was no statistically significant difference for non-union or hardware removal. Similarly, in evaluating osteotomy level, there was no statistical difference between proximal vs distal osteotomy for non-union and hardware removal. In this multi-centered retrospective review of ulnar shortening osteotomies, we found that there was an overall complication rate of 40%. There was no statistically significant difference in complication rates between dorsal vs volar plate placement or proximal vs distal osteotomy sites. Further studies examining other potential risk factors in lowering the complication rate would be beneficial

The Bernese periacetabular osteotomy (PAO) is a well-established procedure in the management of symptomatic hip dysplasia. The associated Smith-Petersen exposure offers excellent visualization of the acetabulum and control of acetabular osteotomy and mobilization. The traditional exposure of the true pelvis involves osteotomy of the iliac wing in order to mobilize the sartorial and inguinal ligament insertion. However, full osteotomy of the iliac spine may necessitate screw fixation if a relatively large segment of bone is included. A known complication with screw fixation of the iliac wing osteotomy involves failure of fixation and screw back out. Moreover, the screw may be irritative to the patient even in the setting of adequate fixation. A larger osteotomy may also injure the lateral femoral cutaneous nerve as it travels near the anterior superior spine. To minimize the risk of these potential complications, a wafer osteotomy may be used to develop a sleeve of tissue involving the sartorial insertion. Markings may be made so that the curvilinear incision is centered about the anterior-superior iliac spine (ASIS). The sartorial sleeve also mobilizes the entirety of the lateral femoral cutaneous nerve medially as it runs and branches to varying degrees in a fatty tissue layer in the tensor-sartorius interval directly beneath the subcutaneous layer, thereby affording protection throughout the procedure. When the ASIS is first osteotomized as a several millimeter-thick mobile fragment and reflected, the sartorius attachment to the mobile fragment of the wafer osteotomy may be preserved. Furthermore, the wafer osteotomy may be re-fixed to the stable pelvis during closure with simple heavy suture fixation alone, avoiding screw insertion or associated removal. Because only a wafer or bone is taken during the spine osteotomy, more bone is available at the ASIS for fixation of the mobile fragment after repositioning. In this technical note, we describe the wafer osteotomy technique in further detail. For any figures or tables, please contact authors directly

Objectives. Minimally invasive surgery (MIS) has gained popularity for hallux valgus, compared to the traditional scarf osteotomy (OS). Though evidence suggests similar clinical outcomes, there is paucity of randomised controlled studies. This study aimed to assess the feasibility of conducting a randomised controlled trial comparing the patient recorded and clinical outcomes for the surgical management of Hallux Valgus between OS and MIS Chevron Akin (MICA). Methods. Patients suitable for surgical correction were invited to participate. Post-op rehabilitation was standardised for both groups. Patients completed a validated questionnaire (Manchester Oxford Foot questionnaire and EQ-5D-5L) pre-operatively and post-operatively at 6 months and 1 year. Radiological parameters and range of motion were measured pre-and post-operatively. Results. 31 patients were recruited between Dec 2017 and June 2022. 17 patients were randomised to MICA (15 female, mean age 51) and 15 to OS (14 female, mean age 51). Both groups had a significant improvement in all MOXFQ parameters at 6m and 12m, as well as radiological parameters. VAS improved for OS (p=0.048) and for MICA (p=0.059) at 6m. There was no significant improvement in EQ-5D in either group at 12 months and no significant difference in operative time (p=0.53). There was a higher number of complications in the MICA group with 5 removal of metalwork (29.4%) and 2 superficial infections (11.8%) versus none in the OS group. The dorsiflexion significantly improved in the OS group at 6months (p=0.04). Recruitment rate dipped during COVID. No patients were lost at follow up. Conclusion. Both surgical options show similar clinical results, but higher complication rates were seen with MICA. This study illustrates the feasibility to conduct a randomised control trial for the comparison between the two techniques. Challenges to recruitment included surgeon equipoise, patient preference, training requirement and the pandemic which could be mitigated in a larger study

Abstract. Introduction. Knee osteotomy, both high tibial and distal femoral osteotomy, is a well-recognised treatment for young, active patients with unicompartmental knee osteoarthritis. Osteotomy around the knee is usually performed as an inpatient procedure. The aim of this study was to assess the effectiveness and patient satisfaction of our day-case protocol for knee osteotomy. Methodology. All patients who underwent day-case knee osteotomy at the study unit, over a three-year period, were reviewed to assess the success of ambulatory care for knee osteotomy. Patients were sent questionnaires to assess functional outcome and patient satisfaction with our day-case process. Results. Thirty-three knee osteotomies were performed as a day-case protocol, of which same day discharge was achieved in 24 patients (73%) and discharge within 24 hours achieved in 32 patients (97%). The mean post-operative Knee Osteoarthritis Outcome Score (KOOS) was 67.1 and 79% of patients rated their care as good or excellent. Return to sporting activities was achieved in 75% of patients, and 88% of patients reported they would be happy to undergo day-case knee osteotomy again. Conclusion. Knee osteotomy, both high tibial and distal femoral osteotomy, can be successfully performed as a day-case procedure with similar improvements in functional outcomes and no increased complication rate, compared to in-patient osteotomy

Introduction. This study assessed outcomes of total knee joint replacements (TKJR) in patients who had undergone previous periarticular osteotomy compared with unicompartmental knee replacement (UKR). Establishing a difference in the results of total knee joint replacements following these operations may be an important consideration in the decision-making and patient counselling around osteotomy versus UKR for the management of single-compartment osteoarthritis. Method. Using data from the New Zealand Joint Registry, we identified 1,895 total knee joint replacements with prior osteotomy and 1,391 with prior UKR. Revision rates and patient-reported outcomes, as measured by the Oxford Knee Score (OKS), between these two groups were compared. Adjusted hazard ratios were also calculated to compare the groups. Results. The revision rate for total knee joint replacement following osteotomy was significantly lower than TKJR following UKR (0.88 per 100 component years versus 1.38 per 100 component years, respectively). Adjusted hazard ratio calculations found that those with TKJR with prior UKR had more than double the risk of requiring revision than those with prior osteotomy. Additionally, there was a statistically significant difference in the mean adjusted OKS scores between the two groups, with improved outcomes in the group with prior osteotomy. Conclusion. Our findings suggest that total knee joint replacement following periarticular osteotomy have a lower risk of revision and improved OKS when compared to those with prior UKR. Previous studies assessing New Zealand Joint Registry have not found a statistically significant difference between the two groups however, these results are no longer in keeping with more contemporary literature. Our study confirms the New Zealand population to be comparable with international studies with TKJR after osteotomy performing significantly better compared with prior UKR

Introduction. Osteotomy is a key step in distraction osteogenesis. Various techniques of osteotomy have been described with its own benefits and pitfalls. Percutaneous osteotomy using multiple drill holes is one of the most widely used osteotomy techniques. It still remains a challenge however to keep the drill holes aligned prior to the osteotomy. Moreover, the efficacy of percutaneous irrigation practice to keep the temperature low during drilling with this technique is also debatable. With an aim to overcome these challenges, we are introducing a device called the Double Barrel Drill Sleeve (DBDS) to perform percutaneous osteotomies. We attempted to compare this method to the conventional multiple drill holes technique using laboratory experiments and clinical data. Materials & Methods. DBDS has two adjacent parallel barrels that can fit 3.2 to 3.5 mm diameter drill bits. It has a guide member at the drilling end that can be inserted through a pre drilled hole at the near and far cortices of a bone. This provides a constant rotating point for drilling of holes through the barrels. An osteotomy simulation was performed to compare percutaneous drilling with DBDS vis-a-vis a conventional single drill sleeve (SDS) by qualified orthopaedic surgeons, mainly to assess the drilling patterns of both techniques. Percutaneous drilling was done on PVC pipes wrapped in thick sponge to simulate tubular bone with surrounding soft tissue. We also assessed the effect of indirect irrigation on temperature during drilling using the DBDS against a control group on a cadaveric bone model. Ultimately we reviewed our patients who had undergone osteotomy for distraction osteogenesis with DBDS and the conventional technique, and compared their outcomes. Results. Completion time for the osteotomy simulation in the DBDS group was significantly faster than the conventional drilling group; 74 seconds to 179 seconds. There was significantly less drilling deviation from the midpoint in the DBDS group as compared to the SDS group. Mean bone temperature during drilling with indirect irrigation using DBDS was significantly lower (32.6'C) compared to the control group (48.4'C). There was no significant difference in healing index between patients treated with DBDS and the conventional method. None of these patients developed non union. Conclusions. Percutaneous drilling with DBDS was quicker and more linear compared to the conventional method. Its double-barreled feature allows effective indirect irrigation during drilling. A comparable healing index in both of the techniques shows its clinical efficacy. These attributes make DBDS a usefull tool to overcome some of the pitfalls associated with the conventional multiple drill holes technique

Mixed Reality has the potential to improve accuracy and reduce required dissection for the performance of peri-acetabular osteotomy. The current work assesses initial proof of concept of MR guidance for PAO. A PAO planning module, based on preoperative computed tomography (CT) imaging, allows for the planning of PAO cut planes and repositioning of the acetabular fragment. 3D files (holograms) of the cut planes and native and planned acetabulum positions are exported with the associated spatial information. The files are then displayed on mixed reality head mounted device (HoloLens2, Microsoft) following intraoperative registration using an FDA-cleared mixed reality application designed primary for hip arthroplasty (HipInsight). PAO was performed on both sides of a bone model (Pacific Research). The osteotomies and acetabular reposition were performed in accordance with the displayed holograms. Post-op CT imaging was performed for analysis. Cutting plane-accuracy was evaluated using a best-fit plane and 2D angles (°) between the planned and achieved supra (SA)- and retroacetabular (RA) osteotomy and retroacetabular and ischial osteotomies (IO) were measured. To evaluate the accuracy of acetabular reorientation, we digitized the acetabular rim and calculated the acetabular opening plane. Absolute errors of planned and achieved operative inclination and anteversion (°) of the acetabular fragment, as well as 3D lateral-center-edge (LCE) angles were calculated. The mean absolute difference between the planned and performed osteotomy angles was 3 ± 3°. The mean absolute error between planned and achieved operative anteversion and inclination was 1 ± 0° and 0 ± 0° respectively. Mean absolute error between planned and achieved 3D LCE angle was 0.5 ± 0.7°. Mixed-reality guidance for the performance of pelvic osteotomies and acetabular fragment reorientation was feasible and highly accurate. This solution may improve the current standard of care by enabling reliable and precise reproduction of the desired acetabular realignment

Introduction. Recurrence after surgical correction of hallux valgus may be related to coronal rotation of the first metatarsal. The scarf osteotomy is a commonly used procedure for correcting hallux valgus but has limited ability to correct rotation. Using weightbearing computed tomography (WBCT), we aimed to measure the coronal rotation of the first metatarsal before and after a scarf osteotomy, and correlate these to clinical outcome scores. Methods. We retrospectively analyzed 16 feet (15 patients) who had a WBCT before and after scarf osteotomy for hallux valgus correction. On both scans, hallux valgus angle (HVA), intermetatarsal angle, and anteroposterior/lateral talus-first metatarsal angle were measured using digitally reconstructed radiographs. Metatarsal pronation (MPA), alpha angle, sesamoid rotation angle and sesamoid position was measured on standardized coronal CT slices. Preoperative and postoperative(12 months) clinical outcome scores(MOxFQ and VAS) were captured. Results. Mean HVA was 28.6±10.1 degrees preoperatively and 12.1±7.7 degrees postoperatively. Mean IMA was 13.7±3.8 degrees preoperatively and 7.5±3.0 degrees postoperatively. Before and after surgery, there were no significant differences in MPA (11.4±7.7 and 11.4±9.9 degrees, respectively; p = 0.75) or alpha angle (10.9±8.0 and 10.7±13.1 degrees, respectively; p = 0.83). There were significant improvements in SRA (26.4±10.2 and 15.7±10.2 degrees, respectively; p = 0.03) and sesamoid position (1.4±1.0 and 0.6±0.6, respectively; p = 0.04) after a scarf osteotomy. There were significant improvements in all outcome scores after surgery. Poorer outcome scores correlated with greater postoperative MPA and alpha angles (r= 0.76 (p = 0.02) and 0.67 (p = 0.03), respectively). Conclusion. A scarf osteotomy does not correct first metatarsal coronal rotation, and worse outcomes are linked to greater metatarsal rotation. Rotation of the metatarsal needs to be measured and considered when planning hallux valgus surgery. Further work is needed to compare postoperative outcomes with rotational osteotomies and modified Lapidus procedures when addressing rotation

Rotational acetabular osteotomy (RAO), one of periacetabular osteotomies, is an effective joint-preserving surgical treatment for developmental dysplasia of the hip. Since 2013, we have been using a CT-based navigation for RAO to perform safe and accurate osteotomy. CT-based navigation allows precise osteotomy during surgery but cannot track the bony fragment after osteotomy. Thus, it is an issue to achieve successful reorientation in accordance with preoperative planning. In this presentation, we introduce a new method to achieve reorientation and evaluate its accuracy. Thirty joints in which CT-based navigated RAO was performed were included in this study. For the first 20 joints, reorientation was confirmed by tracing the lateral aspect of rotated fragment with navigation and checked if it matched with the preoperative planning. For the latter 10 joints, a new method was adopted. Four fiducial points were made on lateral side of the acetabulum in the preoperative 3-dimensional model and intraoperatively, rotation of the osteotomized bone was performed so that the 4 fiducial points match the preoperative plan. To assess the accuracy of position of rotated fragment in each group, preoperative planning and postoperative CT were compared. A total of 24 radial reformat images of postoperative CT were obtained at a half-hour interval following the clockface system around the acetabulum. In every radial image, femoral head coverage of actual postop- and planned were measured to evaluate the accuracy of acetabular fragment repositioning. The 4-fiducial method significantly reduced the reorientation error. Especially in the 12:00 to 1:00 position of the acetabulum, there were significantly fewer errors (p<0.01) and fewer cases with under-correction of the lateral acetabular coverage. With the new method with 4 reference fiducials, reorientation of the acetabulum could be obtained as planned with lesser errors

Abstract. Introduction. Recurrent groin pain following periacetabular osteotomy (PAO) is a challenging problem. The purpose of our study was to evaluate the position and dynamics of the psoas tendon as a potential cause for recurrent groin pain following PAO. Methods. Patients with recurrent groin pain following PAO were identified from a single surgeon series. A total of 13 patients with 18 hips (4.7%) out of a 386 PAO, had recurrent groin pain. Muscle path of the psoas tendon was accurately represented using 3D models from CT data were created with Mimics software. A validated discrete element model using rigid body springs was used to predict psoas tendon movement during hip circumduction and walking. Results. Five out of the 18 hips did not show any malformations at the osteotomy site. Thirteen hips (72%) showed malformation secondary to callus at the superior pubic ramus. These were classified into: osteophytes at the osteotomy site, hypertrophic callus or non-union and malunion at the osteotomy. Mean minimal distance of the psoas tendon to osteophytes was found to be 6.24 mm (n=6) and to the osteotomy site was 14.18 mm (n=18). Conclusions. Recurrent groin pain after PAO needs a thorough assessment. One need to have a high suspicion of psoas issues as a cause. 3D CT scan may be necessary to identify causes related to healing of the pubic osteotomy. Dynamic ultrasound of the psoas psoas tendon may help in evaluating for psoas impingement as a cause of recurrent groin pain in these cases

Developmental dysplasia of the hip (DDH) is defined as abnormal, pathological relations between the elements of the hip joint, resulting from disorders of its development. Since 1984, periacetabular bernese osteotomy (PAO) has been a method of treating DDH. The aim of this study was to evaluate the results of the PAO in persistent deformity from childhood and primary late dysplasia in adolescents and adults. Patients were divided into four groups: A - adolescent patients not operated of DDH in childhood, B – adolescent patient after a surgical treatment of DDH in childhood, C - adults with hip dysplasia not previously operated, D - control group. Radiological evaluation of standard AP view of hip joints was performed before and after the surgery and included parameters: Wiberg angle (CEA), femoral head cover (FHC), medialization, distalisation, the ilio-ischial angle. Improvement in radiological parameters and statistical significance were achieved in all measurements in all patients. The greatest improvement was achieved in: CEA − 19˚ in Group B, Medialization − 3mm in Group C, Distalization − 6mm in Group B, FHC − 17% in Group B, Ilio-ischial angle − 5˚ in Group B. The greatest correction of radiological parameters was obtained in children operated in childhood. Surgical treatment of DDH in childhood worsens the operating conditions in adolescents and adults due to scars, adhesions and altered bone anatomy but leaves the need for less deformity correction. The surgical treatment of DDH in childhood has a beneficial effect on the final outcome of the treatment of patients undergoing PAO surgery in adolescents and young adults

Abstract. Introduction. Osteotomy is recognised treatment for osteoarthritis of the knee. Evidence suggests favourable outcomes when compared to arthroplasty, for younger and more active individuals[1]. Double level osteotomy (DLO) is considered when a single level is insufficient to restore both joint line obliquity and adequate realignment[2]. This paper aims to establish the functional outcomes up to two years post operatively for patients undergoing DLO, using patient reported outcome measures (PROMs). Methodology. All patients who underwent a DLO at either Lister Hospital, Stevenage, or One Hatfield Hospital, Hertfordshire, between 1st January 2018 and 1st October 2020 were identified. DLO were performed by two specialist consultants, independently or in combination. PROMs including pain scores, health score, Oxford knee score (OKS) and knee injury and osteoarthritis outcome score (KOOS) were recorded pre-operatively and at six month, one and two year post operative intervals. Results. 24 patients underwent DLO; a medial opening wedge high tibial osteotomy and lateral closing wedge distal femoral osteotomy. The cohort comprised 21 males, 3 females with an average age of 54.09 (38–77) years. Preoperative pain scores graded from 0–10 improved from 6.86 to 2.0 at 2 years. OKS improved from 23.94 to 47.88, as did KOOS 43.55 to 87.51, over the same duration. Conclusion. DLO was associated with improvements in pain and functional outcomes, compared to pre-operative levels. In patients for whom arthroplasty may be unfavourable, this provides an alternative to non-operative management, the options for which are frequently exhausted early in the disease process

Medial opening wedge high tibial osteotomy (MOWHTO) is the workhorse procedure for correcting varus malalignment of the knee. There have been recent developments in the synthetic options to fill the osteotomy gap. The current gold standard for filling this osteotomy gap is autologous bone graft which is associated with donor site morbidity. We would like to introduce and describe the process of utilizing the novel Osteopore® 3D printed, honeycomb structured, Polycaprolactone and β-Tricalcium Phosphate wedge for filling the gap in MOWHTO. In the advent of additive manufacturing and the quest for more biocompatible materials, the usage of the Osteopore® bone wedge in MOWHTO is a promising technique that may improve the biomechanical stability as well the healing of the osteotomy gap

Abstract. INTRODUCTION. Fracture neck of femur is aptly called as “the fracture of necessity” owing to the various factors responsible for its non-union. Pauwel's inter-trochantric valgus osteotomy is a useful approach to deal with such fractures. AIM. The aim of this study is to evaluate the functional outcome of valgus osteotomy in treatment of neglected and non-union fracture neck of femur using Harris Hip Scoring system (HHS). MATERIAL AND METHODS. This observational study included 25 patients of the age between 25 years and 50 years with more than 3 weeks since injury and the patients with failed primary fixation. Valgus osteotomy using120° double angled blade plate was done. The patients were followed up till one year. The patients' functional outcome was evaluated with pre-operative and post-operative Harris Hip Score (HHS) at 6 months and one year. RESULTS. Outcome was excellent in 14 patients (HHS>90), good in 8 patients (HHS between 80–90) and fair in one patient (HHS=75.6). Two patients ended up in non-union with blade cut out. The mean HHS at the end of one year was 89.18 + 7.822. The mean change in HHS values pre-operatively and one year post-operatively came out to be 69.58 + 20.032. CONCLUSION. We conclude that for the patients under 50 years of age with neglected fracture of the femoral neck, the Pauwel's osteotomy produces many good results

Abstract. Introduction. Compared to the standard Tomofix plate, the anatomical Tomofix medial high tibial (MHT) plate has been shown to improve anatomical fit and post correction tibial contour, following high tibial osteotomy (HTO). Clinical data on surgical complications, osteotomy union rates and survivorship with the anatomical Tomofix MHT plate however remain limited. This study reports mid-term results of HTO surgery, using the anatomical Tomofix MHT plate. Methods. All patients undergoing HTO surgery using the anatomical Tomofix MHT plate between 2017 and 2022 were included in the study. Data on complications, osteotomy union rates and survivorship were collected prospectively and retrospectively analysed. Results. 78 HTO procedures were performed using the anatomical Tomofix plate in 68 patients. Follow-up ranged between 6 weeks and 5 years. Postoperative complications included 5 hinge fractures that united without further intervention, 1 deep vein thrombus and 1 subclinical pulmonary embolism. There were no wound problems and no returns to theatre, other than for planned removal of metalwork at 1 year. All osteotomies united with no loss of correction. Only 1 HTO was successfully revised to a partial medial knee replacement 2.5 years following osteotomy. The 5-year survivorship was 98.7%. Conclusion. The anatomical Tomofix MHT plate achieves excellent biomechanical stability and union rates in HTO surgery, with minimal complications and excellent mid-term HTO survivorship

Reorientating pelvic osteotomies are performed to improve femoral head coverage and secondary degenerative arthritis. A rectangular triple pelvic innominate osteotomy (3PIO) is performed in symptomatic cases. However, deciding optimal screw fixation type to avoid complications is questionable. Therefore, this study aimed to investigate the biomechanical behavior of two different acetabular screw configurations used for rectangular 3PIO osteosynthesis. It was hypothesized that bi-directional screw fixation would be biomechanically superior to mono-axial screw fixation technique. A rectangular 3PIO was performed in twelve right-side artificial Hemi-pelvises. Group 1 (G1) had two axial and one transversal screw in a bi-directional orientation. Group 2 (G2) had three screws in the axial direction through the iliac crest. Acetabular fragment was reoriented to 10.5° inclination in coronal plane, and 10.0° increased anteversion along axial plane. Specimens were biomechanically tested until failure under progressively increasing cyclic loading at 2Hz, starting at 50N peak compression, increasing 0.05N/cycle. Stiffness was calculated from machine data. Acetabular anteversion, inclination and medialization were evaluated from motion tracking data from 250-2500 at 250 cycle increments. Failure cycles and load were evaluated for 5° change in anteversion. Stiffness was higher in G1 (56.46±19.45N/mm) versus G2 (39.02±10.93N/mm) but not significantly, p=0.31. Acetabular fragment anteversion, inclination and medialization increased significantly each group (p≤0.02) and remained non-significantly different between the groups (p≥0.69). Cycles to failure and failure load were not significantly different between G1 (4406±882, 270.30±44.10N) and G2 (5059±682, 302.95±34.10N), p=0.78. From a biomechanical perspective, the present study demonstrates that a bi-directional screw orientation does not necessarily advantageous versus mono-axial alignment when the latter has all three screws evenly distributed over the osteotomy geometry. Moreover, the 3PIO fixation is susceptible to changes in anteversion, inclination and medialization of the acetabular fragment until the bone is healed. Therefore, cautious rehabilitation with partial weight-bearing is recommended

Abstract. Introduction. To investigate the impact medial opening wedge high tibial osteotomy (MOWHTO) has on the progression of patellofemoral OA, patella height and contact pressure within the patellofemoral joint (PF). Methods. A systematic review was conducted in January 2022 according to PRISMA guidelines. Each study was graded as per the MINORS criteria for non-randomised trials. The ICRS cartilage grade of the PF joint at the initial MOWHTO surgery and at second look surgery was compared and relative risk of progression of PF OA was calculated. Evaluation of patella height was assessed by Caton-Deschamps index, Blackburne-Peel index or Insall-Salvati ratio pre and post MOWHTO. Cadaveric studies assessing contact pressures in the PF after MOWHTO were included. Results. Forty-two studies comparing 2,419 patients were included. The mean age was 53.1 years (16–84), 61.3% female. The risk of progression of PF OA was highest in the uniplanar and biplanar MOWHTO with proximal tubercle osteotomy groups (RR= 1.28-1.51, I2= 0%), compared to biplanar MOHWTO with distal tubercle osteotomy (RR= 0.96-1.04, I2 = 0%). Patella height was not affected after biplanar MOWHTO and distal tubercle osteotomy. (P<0.001). Cadaveric studies demonstrate that PF contact pressures increase with more severe corrections (10°) but suggest biplanar MWOHTO and distal tubercle osteotomy induces lower contact pressures within the PF joint than other OWHTO techniques. Conclusion. This novel systematic review demonstrates that biplanar MOWHTO and distal tubercle osteotomy causes lower contact pressures in the PF joint, less severe progression of PF OA and has minimal impact on patella height

Aim. Clavicular osteotomy was described as an adjunct to deltopectoral approach for improved exposure of the glenohumeral joint. This study aims to present contemporary outcomes and complications associated with the routine use of clavicular osteotomy by a single surgeon in a regional setting within New Zealand. Methods. A retrospective case series of patients who have undergone any shoulder arthroplasty for any indication between March 2017 to August 2022. This time period includes all patients who had clavicular osteotomy(OS) and patients over an equal time period prior to the routine use of osteotomy as a reference group (N-OS). Oxford Shoulder Score (OSS) and a Simple Shoulder Test (STT) were used to assess functional outcomes and were compared with the reported literature. Operative times and Complications were reviewed. Results. 66 patients were included in the study. 33 patients in the OS group and 33 in the N-OS group. No difference in age, sex, indications for operative intervention and the surgery provided was identified. No significant difference in operative time between groups (N-OS 121 minutes; OS 128 minutes). No clinically significant difference was identified in the OSS (N-OS; mean 38 vs OS 39) or the STT (N-OS 8.3 vs OS 9). The outcomes scores of both groups are in keeping with published literature. Two post operative clavicle fractures, one prominent surgical knot occurred in the OS that required further surgical intervention. Two cases of localized pain over the clavicle and one case of the prominent lateral clavicle were reported in the OS group. Two cases of localized pain over clavicle reported in the N-OS group. Conclusion. Use of clavicular osteotomy is not associated with inferior patient reported. The osteotomy introduces specific risks, however, the study provides evidence that these complications are infrequent and avoidable. Surgeons should feel confident in using this adjunct when exposure to the shoulder is difficult

Introduction. Curved varus intertrochanteric osteotomy of the femur is an excellent and minimally invasive method for the treatment of osteonecrosis of the femoral head or osteoarthritis of the hip for joint preservation. However, the early postoperative complications of this procedure may be due to separation at the osteotomy site and an increase in varus angle due to early partial weight bearing. Methods. We modified the curved varus intertrochanteric osteotomy of the femur by performing an additional rotation. Regarding the surgical technique, curved varus osteotomy is performed at an angle of 30 degrees to the femoral shaft and an additional rotational osteotomy is also performed at an angle of 15 or 20 degrees to the osteotomy plane. Partial weight bearing with one-third body weight is permitted 3 weeks after surgery. Results. Curved varus intertrochanteric osteotomy of the femur was designed for developmental dysplastic hip by Nishio in 1969 and reported to have good outcomes in 1971. An important feature of this method is that the incidence of high riding of the greater trochanter or shortening of leg length is less than that in varus intertrochanteric osteotomy. Moreover, good contact at the osteotomy site and less lateral shift of the femoral shaft is observed. However, we have experienced a case of separation at the osteotomy site and increase of the varus angle in our hospital. Previous reports recommended that partial weight bearing with one-third body weight should be initiated after 5 weeks and full weight bearing after 6 months because the contact area is decreased at the osteotomy site by varus osteotomy. The post-operative recovery of the patients with total hip arthroplasty is rapid, therefore, we must consider important issues such as initiating the rehabilitation program early and reducing the duration of hospitalization. As per our experience, we think that partial weight bearing with one-third body weight should be initiated at 3 weeks. At the osteotomy site, we rotated the nearest bone segment to move it such that it intersects the proximal and distal bone cortex. Therefore, the osteotomy site will be stabilized and will have the ability to endure load. Another feature of this technique is that the partial removal of the necrotic area leads to an increase in the healthy load-bearing area. A limitation of this method is that an angle of an additional rotation is up to 30 degrees, because the joint capsule cannot be incised circumferentially and the short external rotator tendons should also be preserved. Conclusion. Modified curved varus intertrochanteric osteotomy is a useful method for the prevention of increased degree of a varus angle as well as for obtaining more intact area of femoral head in osteonecrosis