Telemedicine is the delivery of healthcare from a remote location using integrated computer/communication technology. This systematic review aims to explore evidence for telemedicine in orthopaedics to determine its advantages, validity, effectiveness and utilisation particularly during our current pandemic where patient contact is limited. Databases of PubMed, Scopus and CINHAL were systematically searched and articles were included if they involved any form of telephone or video consultation in an orthopaedic population. Findings were synthesised into four themes: patient/clinician satisfaction, accuracy and validity of examination, safety and patient outcomes and cost effectiveness. Quality assessment was undertaken using Cochrane and Joanna Briggs Institute appraisal tools. Twenty studies were included consisting of nine RCTs across numerous orthopaedic subspecialties including fracture care, elective orthopaedics and oncology. Studies revealed high patient satisfaction with telemedicine for convenience, less waiting and travelling time. Telemedicine was cost effective particularly if patients had to travel long distances, required hospital transport or time off work. No clinically significant differences were found in patient examination nor measurement of patient reported outcome measures. Telemedicine was reported to be a safe method of consultation. However, studies were of variable methodological quality with selection bias. In conclusion, evidence suggests that telemedicine in orthopaedics can be safe, cost effective, valid in clinical assessment with high patient/clinician satisfaction. Further work with high quality RCTs is required to elucidate long term outcomes. This systematic review presents up-to-date evidence on the use of telemedicine and provides data for organisations considering its use in the current COVID-19 pandemic and beyond

Industries such as agriculture, construction and military have stringent rules about hearing protection due to the risk of noise induced hearing loss (NIHL). Due to the use of power tools, orthopaedic staff may be at risk of the same condition. The UK Health and Safety Executive (HSE) have clear standards as to what is deemed acceptable occupational noise levels on an A-weighted and C weighted scale. This review is aimed to assess evidence on noise exposure testing within Orthopaedic theatres to see if it exceeds the HSE regulations. A targeted search of online databases PUBMED and EMBASE was conducted using Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) principles. This review was registered prospectively in PROSPERO. An eligibility criterion identifying clinical studies which assessed noise exposure for Orthopaedic staff in theatres were included. Noise exposure data was extracted from these studies and a comparison was made with A weighted and C weighted acceptable exposure levels as quoted in the HSE regulations. Fourteen papers were deemed eligible, which reviewed 133 Orthopaedic operations and 64 Orthopaedic instruments. In total, 61% (81 of 132) of Orthopaedic operations and 70% (45 of 64) of instruments exceeded the noise regulations on an A weighted scale. 22% (10 of 46) of operations exceeded the maximum C weighted peak acceptable noise level. Orthopaedic instruments and operations can exceed safe occupational noise levels. NHS Trusts have clear policies about noise exposure in the workplace but have yet to identify Orthopaedic theatres as a potential at risk area. Orthopaedic staff need education, monitoring and protection whereas Employers and Occupational Health should consider assessments to identify at risk staff in Orthopaedic theatres and offer preventative methods from NIHL

Abstract. INTRODUCTION. With increasing use of fluoroscopy in Orthopaedic theatres in recent years, the occupational radiation exposure to the surgeons and the theatre staff has increased significantly. Thyroid is one of the most radio-sensitive tissues in the body, but there is a clear lack of awareness among theatre staff of risks of radiation to thyroid. METHODS. We prospectively reviewed the use of thyroid shield by the theatre staff in the orthopaedic theatre for two weeks period. We also recorded the number of fluoroscopic images taken and total radiation dosage for each case. RESULTS. Our results showed that of 249 staff in the theatres of which, only 35 people (14.2%) wore thyroid shields during fluoroscopy, whereas 100% were complaint with body protection shield. We noticed that only 30% of the surgeons, 40% of the scrub nurses and 5% anaesthetist use this, while 95% of the radiographers uses thyroid protection in theatre. Average total radiation during upper-limb procedures was 1.25 cGy, during lower-limb procedures it was 43.48 cGy. Total radiations were very high particularly during lower-limb nailing procedures (80.98 cGy). CONCLUSION. Extensive use of fluoroscopy has a stochastic effect (accumulative effect) on thyroid gland particularly, if the dose in higher than 65 cGy. Despite its availability, only 14% people use the thyroid protection shield. We must emphasise the use of thyroid protection shield to the Orthopaedic surgeons, particularly during lower-limb procedures

Paediatric musculoskeletal (MSK) disorders often produce severe limb deformities, that may require surgical correction. This may be challenging, especially in case of multiplanar, multifocal and/or multilevel deformities. The increasing implementation of novel technologies, such as virtual surgical planning (VSP), computer aided surgical simulation (CASS) and 3D-printing is rapidly gaining traction for a range of surgical applications in paediatric orthopaedics, allowing for extreme personalization and accuracy of the correction, by also reducing operative times and complications. However, prompt availability and accessible costs of this technology remain a concern. Here, we report our experience using an in-hospital low-cost desk workstation for VSP and rapid prototyping in the field of paediatric orthopaedic surgery. From April 2018 to September 2022 20 children presenting with congenital or post-traumatic deformities of the limbs requiring corrective osteotomies were included in the study. A conversion procedure was applied to transform the CT scan into a 3D model. The surgery was planned using the 3D generated model. The simulation consisted of a virtual process of correction of the alignment, rotation, lengthening of the bones and choosing the level, shape and direction of the osteotomies. We also simulated and calculated the size and position of hardware and customized massive allografts that were shaped in clean room at the hospital bone bank. Sterilizable 3D models and PSI were printed in high-temperature poly-lactic acid (HTPLA), using a low-cost 3D-printer. Twenty-three operations in twenty patients were performed by using VSP and CASS. The sites of correction were: leg (9 cases) hip (5 cases) elbow/forearm (5 cases) foot (5 cases) The 3D printed sterilizable models were used in 21 cases while HTPLA-PSI were used in five cases. customized massive bone allografts were implanted in 4 cases. No complications related to the use of 3D printed models or cutting guides within the surgical field were observed. Post-operative good or excellent radiographic correction was achieved in 21 cases. In conclusion, the application of VSP, CASS and 3D-printing technology can improve the surgical correction of complex limb deformities in children, helping the surgeon to identify the correct landmarks for the osteotomy, to achieve the desired degree of correction, accurately modelling and positioning hardware and bone grafts when required. The implementation of in-hospital low-cost desk workstations for VSP, CASS and 3D-Printing is an effective and cost-advantageous solution for facilitating the use of these technologies in daily clinical and surgical practice

Medical Genetics is a transversal discipline with the potential to impact on every specialty and subspecialty in medicine and the allied health sciences. The completion of the human genome project resulted in technical advancements in genomics, genomic testing and our understanding of genetic disorders in general. These advancements have greatly enhanced our understanding of the role of genetics in Orthopaedic practice, with respect to both monogenic and complex disorders. Tygerberg Hospital is currently the only state hospital in South Africa to support genetic testing in the form of gene panels as part of routine care. This is complemented by more comprehensive research testing in the form of exome and genome sequencing as part of the Undiagnosed Disease Programme. We audit the genetic and genomic testing done on patients referred from the Orthopaedic clinic over a period of 3 years (2020–2022) and review diagnostic rates and interesting results. The largest group of patients referred (n=50) had a clinical diagnosis of osteogenesis imperfecta (OI). A 100% diagnostic yield was achieved for these patients with the identification of recurring variants (FKBP10, COL1A2). Further families (n=20) with much rarer conditions are presented with important implications on the orthopaedic and medical management, prognosis, and genetic counselling for the families. We highlight the impact of genomic testing in the Orthopaedic clinic. Management changes and precision orthopaedic intervention were only possible due to a genetic diagnosis. We motivate for increased access to testing, especially for younger patients presenting with complex orthopaedic phenotypes

The number of women entering medical school has been steadily increasing over the past two decades; however, the number of women pursuing careers in orthopaedic surgery has not increased at the same rate. One of the suggested reasons for this discrepancy is the perceived incompatibility of having a family while upholding the demands of a surgical career in orthopaedics. A growing body of scientific literature has also outlined the increased rate of infertility and pregnancy complications in women surgeons. The extent to which these factors play a role in the recruitment and retention of women in orthopaedic surgery is unknown. Understanding pregnancy and parenthood in orthopaedic surgery is a critical first step in addressing this issue. A scoping review was conducted to identify literature pertaining to the perceptions and experiences of pregnancy and/or parenthood of women in orthopaedic surgery. Embase, MEDLINE and PsychINFO were searched on June 7th, 2021 with Boolean operators to combine the following terms: orthop?e*, pregnancy, maternity, motherhood, parenthood, parental, and parenting. Studies pertaining to orthopaedic surgery residents, fellows and staff were included. The Arksey and O'Malley framework for scoping studies was followed. Descriptive statistics were used to quantify the included studies while thematic analysis as described by Braun and Clarke was used to analyze the qualitative data. A total of 17 studies from 2006 to 2021 met inclusion criteria. Over half of the available research was conducted within the last two years (n=9, 53%). The majority of studies were conducted in the United States (n=15, 88%) and the United Kingdom (n=2, 12%). The most commonly used study design was survey-based research (n=13, 76%), followed by review studies (n=3, 18%), and case series (n=1, 6%). Thematic analysis revealed five key themes contributing to the women's experiences of pregnancy and/or parenthood in orthopaedics: (1) women are subtly or blatantly discouraged from becoming pregnant by their colleagues and superiors, (2) women delay childbearing to preserve their professional reputation, (3) there are higher rates of infertility and preterm labor in orthopaedic surgeons than in the general population, (4) the orthopaedic work environment can be hazardous and challenging for the pregnant woman, but accommodations are possible to mitigate risks, and (5) overall, there is limited support for pregnant and/or parenting women in orthopaedics throughout their career. The first woman to be board-certified in orthopaedic surgery in the United States was Ruth Jackson in 1937. Eighty-four years later, orthopaedic surgery has the lowest number of women of the surgical specialties. The barriers related to pregnancy and/or parenthood during a woman's career in orthopaedics may be one cause. This study identified five themes related to pregnancy and parenthood that warrant further investigation. Qualitative research approaches can be used to elucidate the details of women's experiences and to provide suggestions for structural changes in the orthopaedic work environment

The use of cannabis is increasingly medically relevant as it is legalized and gains acceptance more broadly. However, the effects of marijuana use on postoperative outcomes following orthopedic surgery have not been well-characterized. This study seeks to illuminate the relationship between marijuana use and the incidence postoperative complications including: DVT, PE, nonunion, and infection following common orthopedic procedures. This study was conducted using a national orthopaedic claims insurance database. We identified all patients undergoing knee arthroscopy, shoulder arthroscopy, operatively managed long bone fractures (humerus, femur, tibia and/or fibula, and radius and/or ulna), and single-level lumbar fusion. The proportion of patients within each surgery cohort who had a diagnostic code for marijuana dependence was assessed. The rates of DVT, PE, and infection within 90 days were assessed for all patients. The rate of nonunion was assessed for the long bone fracture and lumbar fusion cohorts. Univariate analyses of marijuana dependence on all outcomes were performed, followed by a multivariate logistic regression analysis controlling for known patient comorbidities. We identified 1,113,944 knee arthroscopy, 747,938 shoulder arthroscopy, 88,891 lumbar fusion, and 37,163 long bone fracture patients. Out of the 1,987,936 patients, 24,404 patients had a diagnostic code for marijuana dependence. Within all four surgical subgroups, the marijuana dependence cohort experienced increased rates of infection, PE, and DVT, as well as increased rates of nonunion in the lumbar fusion and long bone fracture populations. In the multivariate analyses controlling for a variety of patient risk factors including tobacco use, marijuana dependence was identified as an independent risk factor for infection within all four surgical subgroups (Knee: OR 1.85, p < 0.001; Shoulder: OR 1.65, p < 0.001; Spine: OR 1.45, p < 0.001; Long bone: OR 1.28, p < 0.001), and for nonunion in the lumbar fusion (OR 1.38, p < 0.001) and long bone fracture (OR 1.31, p < 0.001) subgroups. Our data suggests that marijuana dependence may be associated with increased rates of infection and nonunion following a variety of orthopaedic procedures. During preoperative evaluation, surgeons may consider marijuana use as a potential risk factor for postoperative complications, especially within the context of marijuana legalization. Future research into this relationship is necessary

In March 2020, COVID-19 was declared a pandemic by the World Health Organization. The pandemic imposed drastic changes in our social and professional routine. Professionally at all levels our hospital tasks were changed and prioritized. Surgeons and residents were deployed on rotations to fields other than their expertise in orthopaedics. Health-care education received major changes in these challenging times, and students did face difficulties in receiving education, as well as training due to limited clinical and surgical exposure. In response to the WHO regulations, most of the teaching centres and hospitals worldwide have adopted the web-based teaching and learning model to continue the education and training of orthopaedic residents. These results brought significant changes to the training experience in orthopaedic surgery in combination with the fact that clinical duty hours and case volume were substantially reduced. In what concerns orthopaedic journal publications, the Covid-19 pandemic resulted in a decline in the annual publication rate for the first time in over 20 years. Although not uniform, the reduction was most likely due to multifactorial causes. Regarding the appraisal at the end of training, at the Orthopaedic European Board Examination we were able to verify that the outcome at the written part 1 exam was good, equivalent to the outcome prior to the pandemic. However the oral viva was much worse, probably due to the fact that residents skipped much of the clinical and surgical teaching and exposure during 2020 and 2021. At the end of training, theoretical/factual knowledge was good but poor from the clinical practical experience

Years ago, we identified the need of a dedicated group and conference for advanced therapies with musculoskeletal indications. We saw a disconnect between high-level science and the criticality of actual medical need, thus creating a gap between research and industry – a gap that needed to be bridged. To achieve this goal, a vehicle to connect and amplify the expertise of key opinion leaders in advanced therapies in orthopaedics was needed. With that purpose in mind and after years of preparation, the “Advanced Therapies in Orthopaedics Foundation” (ATiO) was established with the aim to create a network consisting of all important stake holders in the field, ranging from clinics & research, to corporates, finance and regulators – an Alliance for Advanced Therapies in Orthopaedics to form the future

Geometric deep learning is a relatively new field that combines the principles of deep learning with techniques from geometry and topology to analyze data with complex structures, such as graphs and manifolds. In orthopedic research, geometric deep learning has been applied to a variety of tasks, including the analysis of imaging data to detect and classify abnormalities, the prediction of patient outcomes following surgical interventions, and the identification of risk factors for degenerative joint disease. This review aims to summarize the current state of the field and highlight the key findings and applications of geometric deep learning in orthopedic research. The review also discusses the potential benefits and limitations of these approaches and identifies areas for future research. Overall, the use of geometric deep learning in orthopedic research has the potential to greatly advance our understanding of the musculoskeletal system and improve patient care

Abstract. Objectives. The objective of this study is to investigate if genomic sequencing is a useful method to diagnose orthopaedic infections. Current methods used to identify the species of bacteria causing orthopaedic infections take considerable time and the results are frequently insufficient for guiding antibiotic treatment. The aim here is to investigate if genomic sequencing is a faster and more reliable method to identify the species of bacteria causing infections. Current methods include a combination of biochemical markers and microbiological cultures which frequently produce false positive results and false negative results. Methods. Samples of prosthetic fluid were obtained from surgical interventions to treat orthopaedic infections. DNA is extracted from these samples lab and nanopore genomic sequencing is performed. Initial investigations informed that a sequencing time of 15 minutes was sufficient. The resulting genomic sequence data was classified using Basic Local Alignment Tool (BLAST) against the NCBI bacterial database and filtered by only including reads with an identity score of 90 and E-value of 1e-50. An E-value of 1e-50 suggests a high-quality result and is commonly used when analysing genomic data. This data was then filtered in R Studio to identify if any species were associated with orthopaedic infections. The results from genomic sequencing were compared to microbiology results from the hospital to see if the same species had been identified. The whole process from DNA extraction to output took approximately 2 hours, which was faster than parallel microbiological cultures. Results. In these preliminary analyses, 15 samples have been collected from patients with confirmed/suspected orthopaedic infections. To date, 11 samples from confirmed infected patients have been sequenced and a summary of the findings are presented in the table attached. As well as finding bacteria species to match microbiological cultures, genomic sequencing has also identified bacteria when culture results have been negative, but the patient is known to have an infection due to clinical indication and previous culture results. This example suggests genomic sequencing may have higher sensitivity than microbiological cultures at detecting bacteria causing orthopaedic infections. Results in table indicate the identification of bacteria from genomic sequencing that match microbiological cultures are high quality. Conclusions. Preliminary data presented using genomic sequencing suggests that the technique may be useful to identify bacterial species causing orthopaedic infections and can do so in a shorter time frame than current microbial methods. The results from genomic sequencing all produced a number of false positive results which hopefully can be reduced by improving the bioinformatic techniques used and increasing the sample number to include individuals without an infection. Further analysis will also look at identifying antibiotic resistance genes in the sequencing data and seeing if this ca be used to predict which patients will and will not respond to antibiotic treatment. The aim at the end of this project is to demonstrate if genomic sequencing is a more sensitive method to identify bacteria causing orthopaedic infections that current methods and if it can be used to guide antibiotic treatment. Include limitations, next steps and bigger picture. Declaration of Interest. (b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project

This qualitative study aims to explore and highlight the experiences of trainees in the Orthopaedic Surgical Education Training (SET) program in New Zealand, with a focus on identifying gender-specific biases which may impact professional development. Orthopaedic SET trainees in New Zealand were invited to complete a qualitative, semi-structured questionnaire exploring their experiences in the Orthopaedic SET program. A broad range of topics were covered, addressing culture, belonging, learning styles and role modelling. Recurrent themes were identified using inductive methods. Analysis of questionnaire responses identified several key themes for women in the Orthopaedic SET program, compared to their male counterparts, including (1) role incredulity, (2) confidence vs. competence, (3) adaptation, (4) interdisciplinary relationships and (5) role modelling. Female participants described experiencing gender bias or discrimination by both patients and interdisciplinary colleagues at a higher rate than their male counterparts. The majority of female participants described feeling as competent as their male counterparts at the same SET level, however, identified that they do not typically exhibit the same confidence in their surgical abilities. Whilst similar numbers of female and male participants described experiencing barriers to career progression, female participants described having to adapt both physically and socially to overcome additional gender-specific barriers. Positive influences on training experience included role modelling and supportive relationships amongst trainee groups. This study highlighted gender-specific biases experienced by trainees in the Orthopaedic SET program in New Zealand. Further investigation is warranted to determine how these experiences affect professional development, and how they may be addressed to foster increased gender equity in the surgical profession. This will likely require system-level interventions to create meaningful and sustainable culture change

Non-linear methods in statistical shape analysis have become increasingly important in orthopedic research as they allow for more accurate and robust analysis of complex shape data such as articulated joints, bony defects and cartilage loss. These methods involve the use of non-linear transformations to describe shapes, rather than the traditional linear approaches, and have been shown to improve the precision and sensitivity of shape analysis in a variety of applications. In orthopedic research, non-linear methods have been used to study a range of topics, including the analysis of bone shape and structure in relation to osteoarthritis, the assessment of joint deformities and their impact on joint function, and the prediction of patient outcomes following surgical interventions. Overall, the use of non-linear methods in statistical shape analysis has the potential to advance our understanding of the relationship between shape and function in the musculoskeletal system and improve the diagnosis and treatment of orthopedic conditions

Abstract. Introduction. The NHS generates 4–5% of the nation's total carbon emissions and over 500,000 tonnes of waste annually. Up to one-third of waste from orthopaedic procedures are recyclable, with large joint arthroplasties producing more than other subspecialties. However, there is limited evidence demonstrating the principles of sustainability and its benefits within orthopaedic surgery. This study aimed to analyse the environmental impact and sustainable initiatives undertaken within orthopaedic surgery. Methodology. A systematic review was performed according to PRISMA guidelines. The systematic search was conducted through EMBASE, Medline, and PubMed libraries. Results. Four studies analysed waste management in primary total knee replacements (TKRs) during the perioperative period. The most prevalent environmental issue was waste management. A total of 33 TKRs were observed across the studies. The mean waste generated per TKR was 13.1kg (range 11.6-15.1kg), with up to 69.9% being hazardous waste. The number of waste streams reported ranged from two to six. This study has further demonstrated that TKRs generated the highest amount of waste per procedure compared to other orthopaedic subspecialties. Three studies reported recycling waste, with up to 43% of total waste from TKRs being potentially recyclable material. Conclusion. Primary TKRs one of the largest contributors of waste generated by orthopaedic procedures during the perioperative period. Environmental sustainability in orthopaedic surgery is a growing area of interest with a wide potential for meaningful change. Further research is needed to study the cumulative carbon footprint of primary TKRs and long-term benefits of environmentally sustainable changes

Aim. Smoking is known to impair wound healing and to increase the risk of peri-operative adverse events and is associated with orthopaedic infection and fracture non-union. Understanding the magnitude of the causal effect on orthopaedic infection recurrence may improve pre-operative patient counselling. Methods. Four prospectively-collected datasets including 1173 participants treated in European centres between 2003 and 2021, followed up to 12 months after surgery for clinically diagnosed orthopaedic infections, were included in logistic regression modelling with Inverse Probability of Treatment Weighting for current smoking status [1–3]. Host factors including age, gender and ASA score were included as potential confounding variables, interacting through surgical treatment as a collider variable in a pre-specified structural causal model informed by clinical experience. The definition of infection recurrence was identical and ascertained separately from baseline factors in three contributing cohorts. A subset of 669 participants with positive histology, microbiology or a sinus at the time of surgery, were analysed separately. Results. Participants were 64% male, with a median age of 60 years (range 18–95); 16% of participants experienced treatment failure by 12 months. 1171 of 1173 participants had current smoking status recorded. As expected for the European population, current smoking was less frequent in older participants (Table 1). There was no baseline association between Charlson score or ASA score and smoking status (p=0.9, p=1, Chi squared test). The estimated adjusted odds ratio for treatment failure at 12 months, resulting from current smoking at the time of surgery, was 1.37 for all participants (95% CI 0.75 to 2.50) and 1.53 for participants with recorded confirmatory criteria (95% CI 1.14 to 6.37). Conclusions. Smoking contributes to infection recurrence, particularly in people with unequivocal evidence of osteomyelitis or PJI. People awaiting surgery for orthopaedic infection should be supported to cease smoking, not only to reduce anaesthetic risk, but to improve treatment outcomes. Limitations of this study include unmeasured socioeconomic confounding and social desirability bias resulting in uncertainty in true smoking status, resulting in underestimated effect size

Aim. Recurrence of bone and joint infection, despite appropriate therapy, is well recognised and stimulates ongoing interest in identifying host factors that predict infection recurrence. Clinical prediction models exist for those treated with DAIR, but to date no models with a low risk of bias predict orthopaedic infection recurrence for people with surgically excised infection and removed metalwork. The aims of this study were to construct and internally validate a risk prediction model for infection recurrence at 12 months, and to identify factors that predict recurrence. Predictive factors must be easy to check in pre-operative assessment and relevant across patient groups. Methods. Four prospectively collected datasets including 1173 participants treated in European centres between 2003 and 2021, followed up to 12 months after surgery for orthopaedic infections, were included in logistic regression modelling [1–3]. The definition of infection recurrence was identical and ascertained separately from baseline factors in three contributing cohorts. Eight predictive factors were investigated following a priori sample size calculation: age, gender, BMI, ASA score, the number of prior operations, immunosuppressive medication, glycosylated haemoglobin (HbA1c), and smoking. Missing data, including systematically missing predictors, were imputed using Multiple Imputation by Chained Equations. Weekly alcohol intake was not included in modelling due to low inter-observer reliability (mean reported intake 12 units per week, 95% CI for mean inter-rater error −16.0 to +15.4 units per week). Results. Participants were 64% male, with a median age of 60 years (range 18–95). 86% of participants had lower limb orthopaedic infections. 732 participants were treated for osteomyelitis, including FRI, and 432 for PJI. 16% of participants experienced treatment failure by 12 months. The full prediction model had moderate apparent discrimination: AUROC (C statistic) 0.67, Brier score 0.13, and reasonable apparent calibration. Of the predictors of interest, associations with failure were seen with prior operations at the same anatomical site (odds ratio for failure 1.51 for each additional prior surgery; 95% CI 1.02 to 2.22, p=0.06), and the current use of immunosuppressive medications (odds ratio for failure 2.94; 95% CI 0.89 to 9.77, p=0.08). Conclusions. This association between number of prior surgeries and treatment failure supports the urgent need to streamline referral pathways for people with orthopaedic infection to specialist multidisciplinary units

Physician health is a global concern, with increasing research efforts directed towards the challenge. Australia has limited published specialty-specific well-being data for trainees and consultants in medicine and surgery. We measured distress in Australian Orthopaedic trainees using the Physician Well-Being Index (PWBI, MedEd Web Solutions) using an online anonymous survey sent by the Australian Orthopaedic Association. The survey response rate was 38% (88/230). Forty-four percent of survey respondents met criteria for distress. Self-reported burnout in the 30 days prior was reported by 63% of respondents. Fifty-eight percent of females and 41% of males met criteria for distress. Of the 19% or respondents identifying as an ethnic minority, 53% were distressed compared to 42% of those identifying as non-ethnic minority. Trainees without a mentor had a 50% distress rate compared to those with a mentor (37% distress rate). Twenty-five percent of all trainees wished they had picked a career outside of medicine and 16% wished they had pursued a medical career other than Orthopaedic Surgery. Of those trainees who had already passed the fellowship exam, 17% wished they had pursued a career outside of medicine and 21% wished they had pursued a medical career in an area other than Orthopaedic Surgery. These findings suggest concerning rates of career regret and gender-related trends in distress in Australian Orthopaedic trainees. Females may be over-represented in our results as 17% of the source population was female compared to 22% of respondents. Further research is required across all Australian specialties to gain further understanding of factors contributing to distress and to assist in the development of strategy to protect against physician burnout

The role of dual consultant operating (DCO) in general orthopaedics has not been researched; where it has shown benefit in other specialties, there is a lack of information on how DCO affects the surgeons themselves. We wanted to explore the potential effects of DCO on stress, as a foundation for further research to guide support for our surgeons. We conducted a survey among orthopaedic consultants around New Zealand, containing questions pertaining to the demographics of respondents, their experience with DCO, what the expected risks and benefits of DCO would be, and provided two high-stress exemplar clinical scenarios where respondents were asked to rate their expected stress level at baseline, with a more junior consultant present, and with a more senior consultant present. We found 99% of respondents had been involved in DCO at some point in their careers, yet only 38% were involved in DCO on at least a monthly basis. Perceived benefits greatly outweighed potential risks: 95% felt DCO would decrease their stress, 91% felt it improved intraoperative decision making, and 89% felt it provided more enjoyment at work and enhanced collegiality. A decrease in perceived stress was seen from baseline with a more junior consultant available and a greater decrease in stress seen with a more senior consultant, particularly in a complex elective setting. All respondents felt there is benefit in DCO and the vast majority feel it has positive effects on stress levels. In a time where burnout is more prevalent, using tools such as DCO could be an effective way to decrease stress, enhance enjoyment and collegiality — challenging some key contributors to burnout — and support mentorship with further skill acquisition. This research provides a good base to pursue further qualitative and quantitative research into the area, with a view to addressing barriers to provision of regular DCO

Instant messaging via WhatsApp is used within hospital teams. Group messaging can lead to efficient and non-hierarchical communication. Despite being end-to-end encrypted, WhatsApp is owned by Facebook, raising concerns regarding data security. The aims of this study were: 1) to record the prevalence of WhatsApp group instant messaging amongst clinical teams; 2) to ascertain clinician attitudes towards use of instant messaging, 3) to gauge clinicians’ awareness of best practice regarding mobile data protection and 4) to create a practical guideline based off available literature that can be used to by clinicians to improve data security practice. Over a two-week period, clinical nurse specialists in the Auckland District Health Board Department of Orthopaedics retrospectively completed a blind audit of all messaging activity across the five teams WhatsApp group message threads, recording quantity of messages sent and the nature of the messages. Concurrently individuals in these WhatsApp groups completed an anonymous survey of their use of WhatsApp and their awareness of local data security policies and practice. A guideline adapted from available literature was created to compare current practice to recommended standards and subsequently adopted into local policy. 1360 messages were sent via WhatsApp in a two-week period. 384 (28%) of the messages contained patient identifiable data. Thirty-six photos were shared. Participants rated use of WhatsApp at 9.1/10 – extremely beneficial. Sixty-five per cent of clinicians reported they had not read or were unaware of the ADHB policies regarding mobile devices and information privacy and security. WhatsApp use is widespread within the Orthopaedic department and is the preferred platform of communication with many perceived benefits. Data security is a risk and implementation of an appropriate guideline to assist clinicians in achieving best practice is crucial to ensure patient data remains protected

Orthopedic Device-Related Infections (ODRIs) are a major medical challenge, particularly due to the involvement of biofilm-encased and multidrug-resistant bacteria. Current treatments, based on antibiotic administration, have proven to be ineffective. Consequently, there is a need for antibiotic-free alternatives. Antimicrobial peptides (AMPs) are a promising solution due to their broad-spectrum of activity, high efficacy at very low concentrations, and low propensity to induce resistance. We aim to develop a new AMP-based chitosan nanogel to be injected during orthopedic device implantation to prevent ODRIs. Chitosan was functionalized with norbornenes (NorChit) through the reaction with carbic anhydride and then, a cysteine-modified AMP, Dhvar5, a peptide with potent antibacterial activity, even against methicillin-resistant Staphylococcus aureus (MRSA), was covalently conjugated to NorChit (NorChit- Dhvar5), through a thiol-norbornene photoclick chemistry (UV= 365 nm). For NorChit-Dhvar5 nanogels production, the NorChit-Dhvar5 solution (0.15% w/v) and Milli-Q water were injected separately into microfluidic system. The nanogels were characterized regarding size, concentration, and shape, using Transmission Electron Microscopy (TEM), Nanoparticle Tracking Analysis (NTA) and Dynamic light scattering (DLS). The nanogels antibacterial properties were assessed in Phosphate Buffer (PBS) for 6 h, against four relevant microorganisms (Pseudomonas aeruginosa, S. aureus and MRSA, and in Muller- Hinton Broth (MHB), 50% (v/v) in PBS, supplemented with human plasma (1% (v/v)), for 6 and 24 h against MRSA. The obtained NorChit-Dhvar5 nanogels, presented a round-shaped and ∼100 nm. NorChit- Dhvar5 nanogels in a concentration of 10. 10. nanogels/mL in PBS were capable of reducing the initial inoculum of P. aeruginosa by 99%, S. aureus by 99%, and MRSA by 90%. These results were corroborated by a 99% MRSA reduction, after 24 h in medium. Furthermore, NorChit-Dhvar5 nanogels do not demonstrate signs of cytotoxicity against MC3T3-E1 cells (a pre-osteoblast cell line) after 14 days, having high potential to prevent antibiotic-resistant infection in the context of ODRIs