We studied the wear generated by motion between polished and shot-blasted titanium-alloy (Ti-6Al-4V) or cobalt-chrome alloy (Co-Cr) surfaces and cortical bone in vitro. Semicircular sections of human proximal femoral cortex were reamed to fit metal cylinders of each alloy. The cylinders were then fitted in the bone, loaded and rotated in physiological saline. Ti-alloy resulted in more wear both of the bone and of the metal than did Co-Cr alloy. Metal wear was reduced and bone wear was increased by shot-blasting, a procedure which introduces surface residual stresses and roughens the metal surface. We conclude that when there is gross motion between a metal implant and bone, Ti-alloy is likely to generate more wear debris than Co-Cr alloy. The least wear both of bone and of metal was produced by polished Co-Cr.

The correction of angular deformities of long bones by incomplete osteotomy, followed three weeks later by manual osteoclasis, overcomes the problem of secondary displacement sometimes seen after correction by complete osteotomy and makes internal fixation unnecessary. This paper presents an experience of twenty-six operations in eighteen patients. In all cases the deformity was corrected with excellent cosmetic and functional results. Complete bony union was achieved and there were no problems with displacement at the osteotomy site. Four cases are described in detail to illustrate use of the technique in different clinical situations.