In recent years, the progressive technology of hemodialysis provides long-term survival for renal failure patients. On the other hand, avascular necrosis of the femoral head from the use of steroids or renal osteodystorophy or femoral neck fracture due to amyloid arthropathy have increased. In such cases, bipolar femoral head prosthesis (FHP) and total hip replacement (THR) are usually performed. But it is at risk of developing severe complications, such as early loosening or infection of the implant.

The aim of this study is to evaluate the stability of the cementless stems in radiograms and clinical results after FHP or THR using three types cementless prosthesis in hemodialysis patients.

The study included 14 patients (19 hips) on hemodialysis who underwent FHP or THR using three types cementless prosthesis at our institution between 1983 to 2005 and we could follow up at least two years. There were 8 women (11 hips) and 6 men (8 hips) with an average age of 43.9 years (range, 20–88). The average follow-up was 6.75 years. The average hemodialysis term was 10.5 years. Three types of hip prosthesis (7 stems were CLS, 6 stems were IMC, 6 stems were Duetto S-I) has been used for the treatment at our institution in the past. The initial diagnosis was avascular necrosis of the femoral head in 8 hips, femoral neck fracture in 5, osteoarthritis in 4 and amyloid arthropathy in two. We assessed at least 3° of varus-valgus deviation or at least 3 mm of subsidence as aseptic loosening of stems, and assessed radiolucent line and stress shielding of the stems in radiograms, also. As for clinical results, we measured postoperative infection rate and revision rate.

Aseptic loosening of stems were identified in 3 hips (15.8%). Radiolucent lines were identified in 5%–26% of hips categolised by Gruen’s classification zone I-VII, although their zones differed according to the stem model. Stress shieldings were identified in 10 hips (53%), most of which were level 1, according to the criteria described by Engh et al. Infection rate and revision rate were 5.3% (1 hip) and it was a long-term hemodialysis patient.

Several studies report, there is a high probability that early loosening of the stems is associated with amyloid deposition. We experienced early loosening of the stems in our case and considered prevention of amyloid deposition very important in improving the prognosis of the arthroplasty. We must follow carefully hemodialysis patients after an operation because their nutrition level is low and their bodies are compromised due to steroids use and their postoperative infection rate is high.

Several stems have been used for revision of total hip replacement (THR). Moreover, management of proximal femoral bone loss at the time of revision THR remains one of the challenges for hip surgeons. Recently, impaction bone grafting has been suggested to resolve this problem, but it is a demanding technique that results in frequent complications.

We have used the Wagner self-locking stem with cancellous chip allograft for reconstruction of proximal femoral bone defect during revision surgery since 1992.

This study evaluated the midterm results of using Wagner revision stem with bone allograft for femoral revision of THR. We could evaluate forty-one femoral revisions performed between 1992 and 2005 using Wagner revision stem with bone allograft.

All patients had been followed for a minimum of three years with a mean follow-up of 8.6 years. Preoperative radiological femoral bone defects were assessed and classified by Gustillo’s classification. Subsidence of the stem was measured on radiograms taken immediately after revision surgery and again at the latest follow-up. Femoral component fixation was graded as radiographic ingrowth, fibrous stable, or unstable according to the criteria described by Engh et al. The incidence of surgical complications was examined. Allografts were assessed for incorporation into host bone as evidenced by trabecular bridging of the host-graft interface. A clear reduction in density or breakdown of the allograft was defined as bone resorption. Kaplan-Meier survival analysis was performed. The end point was revision because of mechanical loosening of the stem.

Bone defects were classified as: 10 hips type I, 20 hips type II, and 7 hips type III and 4 hips were a periprosthetic fracture. Subsidence was measured at the time of last follow-up in six hips (3, 3, 12, 16, 21, 30 mm). At the latest follow-up 37 of 41 stems were stable. Allograft incorporation could clearly be observed in the proximal femoral bone defects of 31 stems. Three stems were defined as showing bone resorption. Surgical complications included 11 intraoperative fractures, two femoral shafts were perforated during reaming, one dislocation postoperatively, and 3 greater trochanter pseudoarthroses. There was one deep infection, and these cases were excluded from survivorship analysis. One unstable stem and one stem with infection had to be revised. Kaplan-Meier survival was 97.1 % at 10 years.

Wagner self-locking stem with allograft for reconstruction for proximal femoral bone defect in revision surgery is a beneficial procedure. However, because there is a high incidence of intraoperative fractures, surgery should be performed carefully.

Improper rotation of the femoral and tibial components in total knee arthroplasty may leads to various patellofemoral(PF) complications. As for the femoral component, alignment it to the epicondylar axis of the femur has been a widely used method. The tibial component traditionally has been aligned to the medial 1/3 of the tibial tuberosity. However, there is no consensus concerning how to determine the tibial component rotation. The purpose of the current study is to evaluate the influence rotational alignment of tibial component upon PF joint. We divided the cases to two groups. Group A: 41cases 50knees (OA 34cases, RA16cases). The average age was 69.5(35~84). Group B: 30cases 30knees (OA 25 cases, RA 5cases). The average age was 72.6(59~86). In group A, the anteropostrior (AP) axis was defined as the line connecting the medial 1/3 of tibial tuberosity and the center of PCL attachment. In group B, the line connecting the medial edge of patellar tendon attachment and the center of PCL attachment was defined as AP axis. We measured the PF alignment on postoperative X-rays. Tangential radiographs were used to measure the amount of patellar tilt (tilting angle: TA), subluxation and patellar lateral shift (LS).

Group A showed that tilting angle 14±4°, lateral shift 0.3±0. These values of group B were 12±5°,0.2±0.1, respectively.

In rotation of tibial component, Insall reported that the landmark in front of tibia was medial 1/3 tibial tuberosity. Akagi et,, al reported that the landmark was midial edge of patellar tendon attachment. This study indicated that the latter had better alignment in patellofemoral joint.

Background: It is known that not only the size but also the shape was different between races. We previously compared the distal femur shapes between the American and the Japanese by lateral radiograph and demonstrated the morphological difference in detail. In this study we evaluated the morphologic feature of the lateral and medial condyles separately between the American and the Japanese using MRI in the sagittal plane.

Patients and methods: The subjects were 99 American and 41 Japanese adult women. MRI scan of sagittal section through the distal half of the femur was taken with the slice thickness about 4.0 mm. The envelope curve of each condyle was superimposed to be approximated to an ellipse. The length and inclination of two axes of the ellipse were estimated as the parameters of the statistical comparison.

Results: The ratio major axis/minor axis of the lateral condyles in American women was significantly larger than that in Japanese, while the ratio of the medial condyles in American was significantly smaller. The inclination of the major axis to the anatomical axis of the distal femur in the American lateral condyles were significantly more than that in Japanese lateral condyles, while both the American and Japanese medial condyles showed similar inclination.

Discussion: The morphological feature of both the lateral and medial condyles in American women was significantly different from that in Japanese. The ratio major axis/minor axis and inclination of lateral condyle in American women were different from those in Japanese, while only the ratio was different between the American and Japanese medial condyles. Understanding of these morphological differences between American and Japanese women is beneficial in elucidating discrepancies in normal knee kinematics and in tailoring the design and procedure for successful total knee arthroplasty.

We evaluated the geometry of the resected femoral surface according to the theory for total knee arthroplasty (TKA) using three-dimensional computed tomography (3D CT).

The 3D CT scans were performed in 44 knees indicated as requiring total knee arthroplasty. The 3D images of the femurs were clipped according to the following procedures. The distal femur was cut perpendicular to the mechanical axis at 10 mm proximal from the medial condyle. Rotational alignment was fixed at 3 degrees external rotation from the posterior condylar line. The anterior condyle was resected using the anterior cortex as the reference point. The posterior condyle was cut at 10 mm anterior from the medial posterior condyle.

The medial-lateral (ML) width/anterior-posterior (AP) length was 1.58 ± 0.14 (mean ± SD). AP length of the 3D images tended to be longer than the box length of the three kinds of components provided when the ML width of the images was approximately equal to that of each component. The widths of medial and lateral posterior condyles of the images were 30.1 ± 3.8 mm and 24.8 ± 3.0 mm, respectively. In all except one case, the widths of the resected medial posterior condyles were greater than those of the medial condyles of all components when those of resected lateral posterior condyles were equal to those of the lateral condyles of the components.

The shapes of the resected femoral surface did not always match those of the components. The configuration of Japanese knee joints is different from that of American knee joints. Components with appropriate geometry should be designed for Japanese patients.

Introduction: Correct rotational alignment of the femoral component is an important factor for successful total knee arthroplasty. This study evaluated relationship between the transepicondylar axis and the posterior condylar axis in normal, varus, and valgus knees.

Methods: Thirty normal knees (mean age: 66.2 years), 30 osteoarthritic knees with varus deformity (67.9 years), and 25 osteoarthritic knees with valgus deformity (70.7 years) were evaluated using magnetic resonance imaging. Femo-rotibial angle on standing anteroposterior radiograph was 185° in the varus knees and 166.1° in the valgus knees. In the transverse view, the angle between the transepicondylar axis and the posterior condylar axis, and the angle between the line perpendicular to the anteroposterior (AP) axis and the posterior condylar axis were measured in each group.

Results: Transepicondylar line showed 6.4° of external rotation in the normal knees and 6.1 of external rotation in the varus knees relative to the posterior condylar axis. However, transepicondylar axis of the valgus knee showed 11.6° of external rotation. This angle was significantly larger than that of normal knee and varus knee (p < 0.05). The line perpendicular to the AP axis was externally rotated from the posterior condylar axis in 6.3° in the normal knees, 6.6° in the varus knees, and 8.8° in the valgus knees. The external rotational angle in the valgus knees was significantly larger than that of the normal and varus knees (p < 0.05).

Discussion and conclusion: These results suggest that there is no hypoplasia of the posterior part of the medial condyle in varus knees, however, posterior part of the lateral condyle in valgus knee is severely distorted. Based on the results of this study, 3 to 5 degrees of external rotation relative to the posterior condyles is not large enough to achieve correct rotational alignment for valgus knees.