Device-associated bacterial infections are a major and costly clinical challenge. This project aimed to develop a smart new biomaterial for implants that helps to protect against infection and inflammation, promote bone growth, and is biodegradable. Gallium (Ga) doped strontium-phosphate was coated on pure Magnesium (Mg) through a chemical conversion process. Mg was distributed in a graduated manner throughout the strontium-phosphate coating GaSrPO4, with a compact structure and a Ga-rich surface. We tested this sample for its biocompatibility, effects on bone remodeling and antibacterial activities including Staphylococcus aureus, S. epidermidis and E. coli - key strains causing infection and early failure of the surgical implantations in orthopaedics and trauma.

Ga was distributed in a gradient way throughout the entire strontium-phosphate coating with a compact structure and a gallium-rich surface. The GaSrPO4 coating protected the underlying Mg from substantial degradation in minimal essential media at physiological conditions over 9 days. The liberated Ga ions from the coatings upon Mg specimens inhibited the growth of bacterial tested. The Ga dopants showed minimal interferences with the SrPO4 based coating, which boosted osteoblasts and undermined osteoclasts in in vitro co-cultures model.

The results evidenced this new material may be further translated to preclinical trial in large animal model and towards clinical trial.

Acknowledgements: Authors are grateful to the financial support from the Australian Research Council through the Linkage Scheme (ARC LP150100343). The authors acknowledge the facilities, and the scientific and technical assistance of the RMIT University and John Curtin School of Medical Research, Australian National University.

Variations in pelvic anatomy are a major risk factor for misplaced percutaneous sacroiliac screws used to treat unstable posterior pelvic ring injuries. A better understanding of pelvic morphology improves preoperative planning and therefore minimises the risk of malpositioned screws, neurological or vascular injuries, failed fixation or malreduction. Hence a classification system which identifies the clinically important anatomical variations of the sacrum would improve communication among pelvic surgeons and inform treatment strategy.

300 Pelvic CT scans from skeletally mature trauma patients that did not have pre-existing posterior pelvic pathology were identified. Axial and coronal transosseous corridor widths at both S1 and S2 were recorded. Additionally, the S1 lateral mass angle were also calculated. Pelvises were classified based upon the sacroiliac joint (SIJ) height using the midpoint of the anterior cortex of L5 as a reference point. Four distinct types could be identified:

Differences in transosseous corridor widths and lateral mass angles between classification types were assessed using two-way ANOVAs.

Type-B was the most common pelvic type followed by Type-A, Type-C, and Type-D. Significant differences in the axial and coronal corridors was observed for all pelvic types at each level. Lateral mass angles increased from Types-A to C, but were smaller in Type-D.

This classification system offers a guide to surgeons navigating variable pelvic anatomy and understanding how it is associated with the differences in transosseous sacral corridors. It can assist surgeons’ preoperative planning of screw position, choice of fixation or the need for technological assistance.

Total knee replacement (TKR) design aims to restore normal kinematics with emphasis on flexion range. The survivorship of a TKR is dependent on the kinematics in six-degrees-of-freedom (6-DoF). Stepping up, such as stair ascent is a kinematically demanding activity after TKR. The debate about design choice has not yet been informed by 6-DoF in vivo kinematics. This prospective randomised controlled trial (RCT) compared kneeling kinematics in three TKR designs.

68 participants were randomised to receive either cruciate retaining (CR-FB), rotating platform (CR-RP) or posterior stabilised (PS-FB) prostheses. Image quality was sufficient for 49 of these patients to be included in the final analysis following a minimum 1-year follow-up. Patients completed a step-up task while being imaged using single-plane fluoroscopy. Femoral and tibial computer-aided design (CAD) models for each of the TKR designs were registered to the fluoroscopic images using bespoke software OrthoVis to generate six-degree-of-freedom kinematics. Differences in kinematics between designs were compared as a function of flexion.

There were no differences in terminal extension between the groups. The CR-FB was further posterior and the CR-RP was more externally rotated at terminal extension compared to the other designs. Furthermore, the CR-FB designs was more posteriorly positioned at each flexion angle compared to both other designs. Additionally, the CR-RP design had more external femoral rotation throughout flexion when compared with both fixed bearing designs. However, there were no differences in total rotation for either step-up or down. Visually, it appears there was substantial variability between participants in each group, indicating unique patient-specific movement patterns.

While use of a specific implant design does influence some kinematic parameters, the overall patterns are similar. Furthermore, there is high variability indicating patient-specific kinematic patterns. At a group level, none of these designs appear to provide markedly different step-up kinematic patterns. This is important for patient expectations following surgery. Future work should aim to better understand the unique patient variability.

Hip and knee arthroplasty (HKA) are two of the most successful orthopaedic procedures. However, one major complication necessitating revision surgery is osteolysis causing aseptic loosening of the prosthesis. JAK-STAT has been demonstrated to influence bone metabolism and can be regulated by microRNA (miRNA).

Adult patients with osteolysis or aseptic loosening undergoing revision HKA were recruited. Age and gender matched patients undergoing primary hip or knee arthroplasty were our controls. Samples of bone, tissue and blood were collected and RNA isolation was performed. The best quality samples were used for RNA-sequencing. Data analysis was performed using RStudio and Galaxy to identify differentially expressed genes. Western blotting of IL6 was used to confirm protein expression.

Five circulating miRNA were identified which had 10 differentially expressed genes in bone and 11 differentially expressed genes in tissue related to the JAK-STAT pathway. IL6 in bone and EpoR in bone were highly significant and IL6 in tissue, MPL in bone, SOCS3 in tissue, JAK3 in bone and SPRED1 in bone were borderline significant. Western blot results demonstrated up-expression of IL6 in bone tissue of revision patients.

Periprosthetic osteolysis and aseptic loosening can be attributed to miRNA regulation of the JAK-STAT pathway in osteoblasts and osteoclasts, leading to increased bone resorption. These findings can be used for further experiments to determine utility in the clinical setting for identifying diagnostic markers or therapeutic targets.

Dysmorphic pelves are a known risk factor for malpositioned iliosacral screws. Improved understanding of pelvic morphology will minimise the risk of screw misplacement, neurovascular injuries and failed fixation. Existing classifications for sacral anatomy are complex and impractical for clinical use. We propose a CT-based classification using variations in pelvic anatomy to predict the availability of transosseous corridors across the sacrum. The classification aims to refine surgical planning which may reduce the risk of surgical complications.

The authors postulated 4 types of pelves. The “superior most point of the sacroiliac joint” (sSIJ) typically corresponds with the mid-lower half of the L5 vertebral body. Hence, “the anterior cortex of L5” (L5_a) was divided to reference 3 distinct pelvic groups. A 4^th group is required to represent pelves with a lumbosacral transitional vertebra. The proposed classification:

Specific measures such as the width of the S1 and S2 axial and coronal corridors and the S1 lateral mass angles were used to differentiate between pelvic types.

Three-hundred pelvic CT scans were classified into their respective types. Analysis of the specific measures mentioned above illustrated the significant difference between each pelvic type. Changes in the size of S1 and S2 axial corridors formed a pattern that was unique for each pelvic type. The intra- and inter-observer ratings were 0.97 and 0.95 respectively.

Distinct relationships between the sizes of S1 and S2 axial corridors informed our recommendations on trans-sacral or iliosacral fixation, number and orientation of screws for each pelvic type. This classification utilises variations in the posterior pelvic ring to offer a planning guide for the insertion of iliosacral screws.

Prosthetic joint infections (PJI) are one of the most devastating complications of joint replacement surgery. They are associated with significant patient morbidity and carry a significant economic cost to treat. The management of PJI varies from antibiotic suppression, debridement, antibiotics, and implant retention (DAIR) procedures through to single/multiple stage revision procedures. Concerns have been raised recently in relation to the rising number of revision arthroplasty procedures that are being undertaken in relation to infection. This database aims to collect data on all PJIs that have been managed in the Australian Capital Territory (ACT) region. This will allow us to investigate the microbial trends, outcomes of surgical intervention and patient outcomes within our local population.

This database will incorporate diagnostic, demographic, microbiological and treatment information in relation to local PJI cases. The data will be collated from the local infectious diseases database, hospital medical records, and where available the Australian Orthopaedic Association National Joint Replacement Registry Data.

The first 100 cases of PJI were assessed. 76% were defined as being acute. 56% of the patients received antibiotics prior to their diagnosis however only 3% were culture negative. 89% were monomicrobial and 11% polymicrobial. The intended management strategy was a DAIR in 38% of patients and a 2-stage revision in 12% of cases. The intended management strategy was successful in 46% of the patients.

The ACT is uniquely placed to analyze and create a local PJI database. This will allow us to guide further treatment and local guidelines in terms of management of these complex patients.

Aim

Advocates of Debridement-Antibiotics-and-Implant-Retention (DAIR) in hip peri-prosthetic joint infection (PJI) argue that a procedure not disturbing a sound prosthesis-bone interface is likely to lead to better survival and functional outcome compared to revision. However, no evidence supports this. This case-control study's aims were to compare outcome of DAIRs for infected 1° total hip arthroplasty (THA) with outcomes following 1° THA and 2-stage revisions of infected 1° THAs.

Introduction

Native hip joint infection can result in hip arthrosis as a complication requiring the need for subsequent arthroplasty. There is little evidence to support single or staged THA. We present the results of patients who have undergone total hip arthroplasty (THA) following hip joint sepsis in our institution.

Introduction

The value of Debridement-Antibiotics-and-Implant-Retention (DAIR) in prosthetic-joint-infection (PJI) is still a matter of debate as most studies to-date are underpowered with variable end-points. In our, tertiary referral, bone infection unit we consider DAIR to be a suitable option in all PJIs with soundly fixed prostheses, despite chronicity. The aims of this study were to define the long-term outcome following DAIR in hip PJI and identify factors that influence it.

Debridement, antibiotics and implant retention (DAIR) is a surgical option in the treatment of prosthetic joint infection (PJI). It is thought to be most appropriate in the treatment of early (≤6 weeks post-op) PJI. Most studies to-date reporting on DAIRs in hip PJI have been underpowered by reporting on small cohorts (n= <45), or report on registry data with associated biases and limitations. In our, tertiary referral, bone infection unit we consider DAIR to be a suitable option in all cases of PJI with a soundly fixed prosthesis, with early or late presentation, especially in patients who are too elderly or infirm to undergo major surgery.

Aim: To define the 10-year outcome following DAIR in hip PJI and identify factors that influence it.

We retrospectively reviewed all DAIRs performed in our unit between 1997 and 2013 for hip PJI. Only infected cases confirmed by histological and microbiological criteria were included. Data recorded included patient demographics and medical history, type of surgery performed (DAIR or DAIR + exchange of modular components), organism identified and type/duration of antibiotic treatment. Outcome measures included complications, mortality rate, implant survivorship and functional outcome.

121 DAIRs were identified with mean age of 71 years (range: 33–97). 67% followed an index procedure of 1° arthroplasty. 53% included exchange of modular components. 60% of DAIRs were for early onset PJI. Isolated staphylococcus was present in 50% of cases and 25% had polymicrobial infection. At follow-up (mean:7 years, range: 0.3 – 18), 83 patients were alive; 5- and 10- year mortality rates were 15% and 35% respectively. 45% had a complication (persistence of infection: 27%, dislocation: 10%) and 40% required further surgery. Twenty hips have been revised to-date (17%). Performing a DAIR and not exchanging the modular components was associated with an almost 3× risk (risk ratio: 2.9) of subsequent implant failure (p=0.04). 10-yr implant survivorship was 80% (95%CI: 70 – 90%). Improved 10-year implant survivorship was associated with DAIR performed for early PJI (85% Vs 68%, p=0.04). Functional outcome will be discussed.

DAIR is a particularly valuable option in the treatment of hip PJI, especially in the early post-operative period. Whenever possible, exchange of modular implants should be undertaken, however DAIRs are associated with increased morbidity even in early PJI. Factors that predict success of DAIR in late PJI need to be identified.

Introduction

Joint preserving procedures have gained popularity in an attempt to delay arthroplasty in young, dysplastic hips. Excellent results can be achieved with peri-acetabular osteotomy (PAO) in congruent non-arthritic hips. The role of salvage procedures such as the Shelf acetabuloplasty remains undefined. This study aims to determine the long-term survival and functional outcome following Shelf acetabuloplasty and to identify factors that influence outcome.

Summary Statement

Using the latest Next Generation Sequencing technologies, we have investigated miRNA expression profiles in human trabecular bone from total hip replacement (THR) revision surgery where wear particle associated osteolysis was evident.

Purpose of the study

To determine the outcome after the Semi-tendinosis tendon was used in reconstruction of the Medial Patella-femoral ligament using a fixed dynamic stabilising structure.

Thoracic kyphosis increases with age. The resultant increase in compression forces on the anterior vertebral bodies leads to further kyphotic deformity and, an increased likelihood of vertebral collapse. This study aimed to determine the relative efficacy of two therapeutic strategies commonly used to treat hyperkyphosis.

69 subjects (26 male: 43 female) were randomised into 4 groups: strengthening, postural re-education (PEd), both and control. The strengthening group attended a gym 3 times a week for 12 weeks to perform seated extension exercises. The PEd group had 3 physiotherapy sessions within a 12 week period in which they received postural assessment and a home exercise programme. The combined group received both interventions while the control group received neither. Outcome measurements were assessed at baseline and 12 weeks. They included static (inclinometer) and 6-hour angular measurements (using flexible electrogoniometer (FEG)) and physical function tests.

There were no significant differences between the marginal means of the angular measurements for any of the intervention groups. However, the group which received both interventions demonstrated reduced kyphosis as measured by the FEG angles (apex of the curve between T3 and T11), while the strengthening group showed reduced inclinometer angles (between T1 and T12). The strengthening group showed improvement in back extensor strength (BES) (0.6 +/− 0.2 N/kg, p < 0.01), time to walk 10 metres (−0.3 +/− 0.6 s, p < 0.05), and time to stand and sit 5 times (−0.9 +/− 0.6 s, p < 0.05). However, there was no relationship between change in BES and change in kyphotic angle. The PEd group showed the greatest improvement in the timed up and go test but this was not significant. Improvement in inclinometer angle over the 12 weeks was associated with degree of kyphosis at baseline (upright inclinometer r = −0.47, p=0.0001) but this relationship was not apparent in the FEG measurements. Both the FEG and inclinometer angles showed a marked decrease in degree of improvement in subjects aged >70.

(50/50). A combination of strengthening and PEd was most effective at reducing hyperkyphosis. BES was improved with resisted strengthening but not with home-based postural exercises. However, increased BES was not associated with decreased kyphosis. Larger baseline kyphosis was associated with greater angular improvement. Subjects aged >70 were less likely to improve.

Introduction

Since the introduction of 3rd generation Metal-on-Metal-Hip-Resurfacing-Arthroplasty (MoMHRA), thousands of such prostheses have been implanted worldwide in younger patients with end-stage hip osteoarthritis. However, no independent centre has reported their medium-to-long term outcome. The aim of this study is to report the ten year survival and outcome of the Birmingham Hip Resurfacing (BHR), the most commonly used MoMHRA worldwide.

INTRODUCTION

Femoral neck narrowing (NN) following Metal-on-Metal Hip Resurfacing Arthroplasty (MoMHRA) is a well-recognised clinical phenomenon. The incidence of resurfaced hips with NN > 10% is reported to be up to 27%. Its pathogenesis is thought to be multi-factorial secondary to stress shielding, impingement, osteolysis secondary to wear/ion particles and as a result of reduced vascularity and pressure effect on cancellous bone secondary to the presence of a soft-tissue mass around the resurfaced hip. Recognised risk factors for its development include: female gender and the presence of a pseudotumour. Serum Chromium (Cr) and Cobalt (Co) are recognised surrogate markers of in-vivo wear of MoMHRA. The aims of this study were to establish whether NN is associated with increased wear.

2D/3D image registration techniques have supplanted RSA for kinematic analysis as they are faster, non-invasive and enable pre and post op studies. Improved algorithms have solved the problem of accuracy of out-of-plane translation [1,2]. The aim of this study is to apply these new algorithms to the post op case.

In this study, Computer-Aided Design (CAD) models of the femoral and tibial components were registered to fluoroscopic images. The prosthesis (RBK knee, Global Orthopaedic Technology), was implanted into a sawbones knee. A perspex cage held the knee static while simultaneous fluoroscopy and dual X-rays were taken from 0 and 90 degrees flexion. Translations orthogonal to the fluoroscope were simulated by sliding the cage at 5 mm intervals. The CAD models were then registered with the fluoroscopy frames. Registration information was used to perform kinematic analysis.

This study has demonstrated greater accuracy for the post operative than pre-operative registration applications. The standard deviation of error for flexion/extension was 0.23° with respect to RSA. The average standard deviation of error for out-of-plane rotations (i.e. abduction/adduction and internal/external rotation) was 0.46°. Translations such as anterior-posterior drawer, compression/distraction and medio-lateral shift had errors of 0.16 mm, 0.17 mm and 0.59 mm, respectively. Both the registration and kinematic analysis accuracies for prosthesis components were superior to those for registration of natural (e.g. cadaver) bones [1]. While rotation accuracies improved about 0.1°, improvement in translation was substantial. In particular, medio-lateral translation accuracy has improved from 1 mm (in our previous study) to 0.59 mm, which is promising. It is worth noting that the best reported accuracy for out-of-plane or medio-lateral translation has been 1.03 mm [2]. Hence, this technique is competitive with other 3D/2D registration methods reported in the literature.

Our experiments show that our 3D CAD to 2D fluoroscopy registration method is sufficiently accurate to produce confident and reliable analysis of prospective kinematics studies.

Greater trochanteric pain syndrome (GTPS) is common, yet the impact on function and quality of life has not been measured. The aim of this study was to quantify the impact on function and quality of life, comparing the results to people with severe hip osteoarthritis and an asymptomatic control group.

Forty two people with GTPS – including 11 not actively seeking treatment and 11 seeking surgical treatment, 20 with severe hip osteoarthritis (OA), and 23 age and sex matched asymptomatic participants (ASC) where recruited from public and private hospitals, and the community. Upon confirming meeting inclusion and exclusion criteria participants were interviewed. Exclusion criteria included lumbar nerve root signs; inflammatory, neoplastic and metabolic disorders. Measured used were the Harris hip score (HHS); the Oswestry disability index (ODI); the Australian quality of life instrument (AQoL); the Functional co-morbidity index (FCI); and fulltime work assessments.

No difference was found between the GTPS and the OA group on the HHS, ODI, AQoL or the FCI measures. Both symptomatic groups were significantly more disabled than the ASC group on the HHS and ODI (p<0.001). The GTPS and OA groups had lower AQoL than the ASC group (p<0.001); and higher FCI results than the ASC group (GTPS vs ASC, p=0.005; OA vs ASC, p=0.019). GTPS participants were least likely to be in full time work; full time work participation probability (95% C.I.): GTPS Prob=0.288 (0.160 to 0.463), OA Prob= 0.518 (0.273 to 0.753); ASC group of Prob=0.676 (0.439 to 0.847).

People with GTPS have similar levels of pain, disability and quality of life, but are less likely to be in full time employment than people with severe hip OA which puts them at risk of economic hardship. Research on conservative and surgical treatments should measure pain, disability and work participation.

INTRODUCTION

Studies have suggested that there is a reduction in head-neck-ratio (HNR) associated with MoMHRA. A reduction in HNR at operation would decrease range of movement and increase impingement risk. Impingement could lead to 20 edge loading, increasing wear. Serum ion levels of Chromium (Cr) and Cobalt (Co) are surrogate markers of wear. Although acetabular component orientation has been shown to contribute to wear and PT development, the role of a decrease in HNR has only been highlighted in PT development. This study aimed to measure changes in HNR that occur at resurfacing and determine any gender- and component size-specific differences. In addition it aimed to determine whether changes in HNR could be associated with increased wear.

Purpose

No knee-specific outcome measures have demonstrated reliability, validity or responsiveness in patients with multiligament knee injuries. Furthermore, the content validity of existing questionnaires has been challenged and remains unknown for patients with concomitant neurovascular injury. As a first step in developing a disease-specific outcome measure, the objective of this study was to identify items from existing knee questionnaires pertinent to patients with multiligament knee injuries using established a priori criteria.