Advertisement for orthosearch.org.uk
Results 1 - 10 of 10
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_11 | Pages 32 - 32
1 Jun 2016
Sharma V Shamoon R Maheson M Jones SA
Full Access

Introduction

The Corail stem is a fully HA coated tapered implant that has demonstrated long-term success. On the NJR it has become one of the most commonly used implants in the UK. The aim of our study was to document our experience of the revision of this implant together highlighting some important technical considerations.

Patients/Materials & Methods

A retrospective review of a consecutive case series of revision procedures where the Corail stem was extracted. We considered time since implantation, collared or uncollared design, indication for revision, Paprosky classification of femoral deficiency, endo-femoral reconstruction or extended approach/osteotomy, subsequent reconstruction either further primary type implant (cemented or cementless) or revision femoral implant.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_3 | Pages 142 - 142
1 Jan 2016
Sabesan V Sharma V Schrotenboer A
Full Access

Introduction

Recent literature has shown that RSAs successfully improve pain and functionality, however variability in range of motion and high complication rates persist. Biomechanical studies suggest that tensioning of the deltoid, resulting from deltoid lengthening, improves range of motion by increasing the moment arm. This study aims to provide clinical significance for deltoid tensioning by comparing postoperative range of motion measurements with deltoid length for 93 patients.

Methods

Deltoid length measurements were performed radiographically for 93 patients. Measurements were performed on both preoperative and postoperative x-rays in order to assess deltoid lengthening. The deltoid length was measured as the distance from the infeolateral tip of the acromion to the deltoid tuberosity on the humerus for both pre- and post- x-rays. For preoperative center of rotation measurements, the distance extended from the center of humeral head (estimated as radius of best fit circle) to deltoid length line. For postoperative measurements, the distance was from the center of glenosphere implant to deltoid length line. Forward flexion and external rotation was measured for all patients.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 516 - 516
1 Dec 2013
Sabesan V Callanan M Sharma V Ghareeb G Moravek J Wiater JM
Full Access

Background

There has been increased focus on understanding the risk factors associated with scapular notching in reverse shoulder arthroplasty (RSA). The purpose of this study is to evaluate the effect of scapular morphology and surgical technique on the occurrence of scapular notching using the notching index as a comprehensive predictive tool.

Methods

Ninety-one patients treated with a primary RSA were followed for a minimum of 24 months. Using a previously published notching index formula ((PSNA × 0.13) + (PGRD)), a notching index value for all patients was calculated. Radiographic assessment of patients were grouped by Nerot grade of scapular notching, group mean differences for prosthetic scapular neck angle (PSNA), peg glenoid rim distance (PGRD), preoperative scapular neck angle (SNA), notching index and clinical outcomes were compared.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 166 - 166
1 Dec 2013
Kurdziel M Sabesan V Ackerman J Sharma V Baker K Wiater JM
Full Access

Purpose:

The optimal degree of conformity between the glenoid and humeral components in cemented total shoulder arthroplasty (TSA) has not been established. Glenoid component stability is thought to be at risk due to the “rocking-horse” phenomenom, which, can lead to increased micromotion and loosening in response to humeral head edge loading. The goal of this biomechanical study is to investigate the influence of glenohumeral mismatch on bone-implant interface micromotion in a cemented glenoid implant model.

Methods:

Twenty-Five cemented glenoid components (Affiniti, Tornier, Inc., Bloomington, MN, USA) were implanted in polyurethane foam biomechanics testing blocks. Five glenoid sizes, 40 mm, 44 mm, 48 mm, 52 mm and 55 mm (n = 5 per glenoid size), were cyclically tested according to ASTM Standard F-2028-08. A 44 mm humeral head (Affiniti, Tornier, Inc., Bloomington, MN, USA) was positioned centrally within the glenoid fixed to a materials testing frame (MTS Mini-Bionix II, Eden Prairie, MN, USA). Phase I testing (n = 3 per glenoid size) involved a subluxation test for determination of the humeral head translation distance which would be used for phase II cyclic testing. During cyclic loading, the humeral head was translated ± distance for 50,000 cycles at a frequency of 2 Hz, simulating approximately 5 years of device use. Glenoid compression, distraction, and superior-inferior glenoid translation were measured throughout testing via two differential variable reluctance transducers.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 515 - 515
1 Dec 2013
Sabesan V Callanan M Sharma V
Full Access

Background

Total shoulder arthroplasty is technically demanding in regards to implantation of the glenoid component, especially in the setting of increased glenoid deformity and posterior glenoid wear. Augmented glenoid implants are an important and innovative option; however, there is little evidence accessible to surgeons to guide in the selection of the appropriate size augmented glenoid.

Methods

Solid computer models of a commercially available augmented glenoid components (+3, +5, +7) contained within the software allowed for placement of the best fit glenoid component within the 3D reconstruct of each patient's scapula. Peg perforation, amount of bone reamed and amount of medialization were recorded for each augment size.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 184 - 184
1 Sep 2012
Dhawan R Sharma V
Full Access

Aims

The aim of this study was to statistically analyse the incidence and distribution of humerus fractures in the adult age group between 3rd and 10th decades.

Methods

The total number of patients was retrieved from the audit department of the hospital using the codes to identify patients between 1997 and 2009. The data included total number of patients aged 20 to 100 years who were either reviewed in the fracture clinics or admitted to the hospital with forearm fractures along with patient gender, age at the time of incident and time of the year the incident occurred. Annual incidence of fractures along with the distribution of fracture incidence per year and per individual month was calculated. The patients’ age were classified in to 3rd to 10th decades. Linear regression analysis was carried out to identify the relationship between fracture incidence and the age or time of the injury. Correlation coefficients(R) and r2 were calculated for all the regression analyses. SPSS (version 16) and Microsoft Excel 2007 were used for statistics.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 469 - 469
1 Sep 2012
Dhawan R Sharma V
Full Access

Aims

The aim of this study was to statistically analyse the incidence and distribution of forearm fractures in the adult age group (3rd–10th Decades) between 1997 and 2009.

Methods

Records of patients with forearm fractures were retrieved from the hospital audit department using the predetermined codes to identify patients. The data included total number of patients between 20 and 100 years who were either reviewed in the fracture clinics or admitted to the hospital with forearm fractures along with patient gender, age at the time of incident and time of the year the incident occurred. Incidence of total fractures per year and per each month in the year was calculated. The patients were divided into age groups between 2nd to 10th decades. Linear regression analysis was carried out to identify the relationship between fracture incidence and the age or time of the injury. Correlation coefficients(R) and r2 were calculated for all the regression analyses. Fractures were also classified according to the Orthopaedic Trauma Association (OTA) classification system. SPSS (version 16) and Microsoft Excel 2007 were used for statistics.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 484 - 484
1 Sep 2012
Sharma V Dhawan R
Full Access

Aims and objectives

The aim of this study was to assess the radiographic outcome by using Lindstrom grading for the management of Malone 2A and 2B fractures by 3 different methods of treatment. The three different methods included manipulation under anaesthesia, k-wire fixation and open reduction internal fixation.

Methods and materials

Between March 2006 and February 2007, 62 intra-articular distal radius fractures were retrospectively selected. 31 patients including 21 females and 9 males with an average age of 62 years were classified as Malone 2A fractures and 32 patients including 18 females and 14 males with an average age of 64.5 years were classified as Malone 2B fractures. 18 patients had manipulation under anaesthetic (MUA) and immobilisation in a plaster of paris (POP) cast, 27 patients had manipulation and k-wire fixation and 17 patients had open reduction internal fixation (ORIF) of the fractures. All the patients had radiographic assessment at 6 weeks post op using Lindstrom grading. Grade 1 and 2 were considered acceptable, grade 3 and 4 were considered unacceptable.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXVII | Pages 485 - 485
1 Sep 2012
Dhawan R Sharma V
Full Access

Aims and objectives

The aim of this study was to statistically analyse the calcaneal fractures occurring in the community and distribution within the various age groups divided into decades.

Methods and materials

Records of calcaneal fractures were retrieved from the audit department of the hospital using the various codes to identify patients reviewed in the clinics or admitted to the hospital between 1997 and 2009. The data collected included the total number of calcaneal fractures, total number in either gender, age at the time of incident, month of the year the incident occurred. Annual distribution of incidence of forearm fractures was calculated for every year and every month of the year. The age of the patients was divided into decades. Linear regression analysis and correlation coefficients were calculated between the incidence of fractures and different variables including age, gender and the time of the injury.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_IV | Pages 559 - 559
1 Oct 2010
Sharma V Gale Mansouri R Maqsood M
Full Access

Distal femoral LCP was used in 41 consecutive distal AO type A and type C fractures; Vancouver C periprosthetic femoral shaft fractures and Lewis and Rorabeck Type 2 periprosthetic supracondylar fractures of the femur between Oct 2005 and Feb 2008 at a District General Hospital in UK. We aim to present the functional and radiological results at a mean duration of 18.7 months after the surgery.

Between Oct 2005 and Feb 2008, forty patients with a total of forty-one fractures were treated with a distal femoral LCP. There were seventeen male patients and twenty three female patients with a mean age of 73.8 years. There were 29 distal femoral fractures (AO type A = 20; type C = 9) and 12 periprosthetic fractures (Vancouver C = 4; Lewis and Rorabeck Type 2 = 8). Six of the fractures were open. Clinical and radiographic results, including union time, malalignment and implant complications were assessed. Function was assessed by using the Knee Society score. The mean duration of follow-up was 18.7 months (range, seven to thirty five months).

Thirty seven fractures united during this follow up. Three fractures which showed features of delayed or non union needed additional procedures. Screw loosening necessitating screw removal was required in three patients. Deep infection was seen in one patient. Malalignment more than 10 degrees in AP or Lat views was evident in five cases. Excellent to good Knee Society score was achieved in 82 percent of cases. Fair to poor score was seen in 18 percent of cases.

Distal femoral locking plates offer more fixation versatility without an apparent increase in mechanical complications or loss of reduction.