Aims

Accumulated evidence indicates that local cell origins may ingrain differences in the phenotypic activity of human osteoblasts. We hypothesized that these differences may also exist in osteoblasts harvested from the same bone type at periarticular sites, including those adjacent to the fixation sites for total joint implant components.

The aim of this study was to evaluate the role of peripheral blood derived mononucleated cells (PBMC) in osteochondral repair. We compared the healing of a critical size osteochondral defect in the medial femoral condyle and lateral trochlear sulcus in an ovine model.

Introduction

Massive rotator cuff repairs have up to 60% failure rate and repair of a chronic repair can have up to 40% failure rate. With this in mind, new methodologies are being to being developed to overcome this problem. The use of tendon augmentation grafts is one of them. Prior attempts have shown equivocal or poorer outcomes to control repairs. Aims and objectives: The specific aim of these expereiments was to test how well ovine tendon cells would take to a specific biological augmentation graft (Ligamimetic), and wheter tissue engineering techniques would enhance this.

Introduction

Rotator cuff tears remain a problem, with massive tears having a failure rate of repair reported of up to 60%, despite advances in surgical techniques. Tissue engineering techniques offers the possibility of regenerating damaged tendon tissue to a pre-injury state. We explore these techniques by implanting two novel tendon augmentation grafts with use of platelet rich plasma (PRP) in sheep.

Introduction

The MITCH PCR is an anatomic, flexible, horse-shoe shaped acetabular component, with 2 polar fins. The rationale of the PCR cup design is to reproduce a near-physiological stress distribution in the bone adjacent to the prosthesis. The thin composite cup is designed to fuse and flex in harmony with the surrounding bony structure. Only the pathological acetabular cartilage and underlying subchondral bone of the horseshoe-shaped, load-bearing portion of the acetabular socket is replaced, thus preserving viable bone stock. The PCR is manufactured from injection moulded carbon fibre reinforced polyetheretherketone (PEEK), with a two layer outer surface comprising hydroxyapatite and plasma sprayed commercially pure titanium. It is implanted in conjunction with a large diameter low wear femoral head, producing a bearing that will generate minimal wear debris with relatively inert particles.

Pre-clinical mechanical testing, finite element analysis and biocompatibility studies have been undertaken. FEA evaluation predicts preservation of host bone density in the load bearing segments. A pilot clinical study was completed on a proto-type version of the PCR cup (the “Cambridge” cup), achieving excellent 5 and 10 year results.

Mesenchymal stem cells (MSCs) have potential for therapeutic repair of cartilage and bone but still require optimization in terms of their capacity to deposit an appropriate extracellular matrix (ECM). Adult human cartilage has a limited capacity for repair and is unusual in that it is one of the few tissues where injury is not followed by an influx of monocytes. We are studying the effects of co-culturing primary monocytes with MSCs differentiating along chondrogenic lineage but in addition we needed to investigate the effects of the monocytes on the mature chondrocytes that will result from the MSCs and will also be present in the host tissue.

Human articular cartilage chondrocytes were isolated from human donors undergoing knee replacement surgery for osteoarthritis (OA) with full ethical consent. Cultures were expanded and cells used below passage five for co-culture experiments. Monocytes were prepared from fresh heparinized human blood samples by Ficoll gradient. Co-cultures consisted of either chondrocyte micromasses overlaid with monocytes, or chondrocytes and monocytes seeded together within a collagen/glycosaminoglycan scaffold (Chondromimetic, Tigenix UK). Media, cell pellets and scaffolds were analysed for extracellular matrix (ECM) proteins and proteases by dot blot, western blot, zymography and immunohistochemistry.

Human chondrocytes maintained stable micromasses and laid down an ECM for at least 40 days. Human monocytes eventually formed a proliferating cell population with a rounded morphology on top of the chondrocyte micromasses. These cells established an adherent population with a fibroblastic morphology when replated on plastic. Analysis of chondrocyte ECM proteins indicated that monocytes affected deposition of types I and II collagen, decorin and fibronectin and the overall amounts of gelatinases released. RTPCR demonstrated a decrease in type I collagen expression and a concomitant increase in MMP13 expression.

The precise interaction between monocytes and and chondrocytes has yet to be established but is thought to involve a mixture of contact and paracrine factors. In this study co-culture of monocytes with chondrocytes resulted in phenotypic changes to the chondrocytes which may warrant the inclusion of monocytes in cartilage/bone repair and also provide information as to the responses of OA chondrocytes to external stimuli.

Introduction

Mesenchymal stem cells (MSC) are an attractive cell population for regeneration of mesenchymal tissue such as bone and cartilage. Various studies have demonstrated the repair capacity of MSCs and even their usefulness in treating critical size defects. Much of the work conducted on adult stem cells has focused on MSCs found within the bone marrow stroma. Adipose tissue, like bone marrow, is derived from the embryonic mesenchyme and contains a stroma that is easily isolated. The aim of the present study is to evaluate the differentiation capability of adipose-tissue derived stem cells (ASC) extracted from the infrapatellar fat pad.

Porous collagen-glycosaminoglycan (Col/GAG) scaffolds have previously been used clinically as regeneration templates for peripheral nerves and skin^[1]. For defects involving even minimal load-bearing applications however, these scaffolds do not possess the required stiffness. Calcium phosphates (CaPs) are often used as bone-graft substitutes due to their biocompatibility and direct bone-bonding ability. While CaPs have sufficient stiffness for bone-defect applications, unlike Col/GAG they lack elasticity and are very brittle. Combining these two materials produces a composite with enhanced material properties and chemical similarity to natural bone. The addition of CaP nanocrystallites into the Col/GAG matrix produces a 3-dimensional structure that maintains its structural integrity even when wet. In this study, the in vivo performance of mineralised Col/GAG composites was evaluated by implantation into a six-week ovine bone-defect model.

Four different materials were implanted; Col/GAG alone, Col/GAG with octacalcium phosphate, Col/GAG with hydroxyapatite and Col/GAG with brushite. Implants with a diameter of 9mm and length of 9mm, were placed bilaterally into the distal femoral condyle of the hind legs of thirteen sheep. This site was selected due to the large volume of load-bearing cancellous bone. Cancellous autograft was harvested from the tibial tuberosity and placed in the defect sites of two sheep as a positive control.

All animals were sacrificed after 6 weeks and tissue containing the implants was prepared for histological evaluation. Image analysis of Von Kossa stained sections showed that all mineralised Col/GAG implants had significantly more bone in the implant site than unmineralised Col/GAG but were not significantly different between CaPs. Interestingly, new bone formation often followed the structure of the porous material struts which acted as a template. The defect containing the autograft contained the greatest amount of new bone.

Maintaining femoral neck cortical thickness may help prevent hip fracture. Fracture initiation probably starts superiorly at flaws, ie where the cortex is thinnest. Whole body computed tomography (QCT) is now being used to study cortical thickness but limited resolution (> 300 micrometers) makes in vivo estimates imprecise, whereas microscopy s resolution approaches 1 micrometer. We have therefore extended our microscopic studies on femoral neck biopsies to include men (14 cases, 26 controls) and women (50 cases, 23 controls), and here provide data on true cortical thickness in subjects with and without hip fracture.

Whole femoral neck cross-sections obtained at hemiarthroplasty (or at post-mortem in controls) were embedded in methacrylate, cut, stained and imaged at medium power. Image-J was used to define cortical boundaries and to measure cortical thicknesses at 5 degree intervals of arc from the cross-sections centre of area.

We confirmed that the mid-femoral neck (or narrow neck) site, defined as where the ratio of maximum to minimum neck diameter (max:min) is 1.4, shows great asymmetry, with the thick inferior cortical octant averaging over 3mm thickness (mean age 79 years inter-quartile range 74-85). In the superior 3 octants cortical thickness averaged 26% of that seen inferiorly. To assess statistical determinants of cortical thickness, the data were modelled with linear regression in octants after adjusting for subjects age, sex, max:min, and hip fracture status. To achieve normality of residuals the cortical thickness data were log-transformed. 95% of measured cortical thicknesses fell between 45% and 220% of the mean for octant. In the thinner, superior three octants, minimum thicknesses were just under 0.3 mm in the fracture cases ie close to 35% of the subjects mean for octant. Cases had about 17% thinner cortical thicknesses in all octants than controls, while female controls had cortical thicknesses that uniformly averaged 90% of male. In conclusion, compared to gender and age-matched controls, intra-capsular hip facture cases had generalized cortical thinning in all mid-neck octants. This disease effect contrasts markedly with the effect of normal ageing, which thins preferentially the mechanically under-loaded superior cortex and spares the infero-anterior cortex.

Meniscal cartilage provides joint stabilisation, load distribution, impact absorption and decreased friction in joints that have a complex movement such as the knee. If the meniscal cartilage degrades or is surgically removed, there is a strong probability, over time, of damage to the articular surface. The ability to regenerate damaged meniscal cartilage with an implanted device that replaces the biological equivalent would allow for joint stabilisation, robust movement and reduce the risk of damage to the articular cartilage. An implant with many of the characteristics of meniscus and with the ability to integrate correctly and firmly with the surrounding tissue, would be advantageous.

Inclusion of Platelet Rich Plasma (PRP) into the scaffolds to provide a concentrated source of matrix proteins and autologous growth factors may further enhance the regenerative repair process. To investigate the suitability of the collagen scaffolds, addition of meniscal chondrocytes and or PRP was examined in vitro.

Human meniscal chondrocyte cells were isolated, via collagenase digestion, from meniscal cartilage recovered from total knee replacement surgery. Meniscal chondrocytes were cultured in vitro to expand cell numbers. PRP was produced from volunteer's blood using a centrifuge and density based platelet recovery system. Release of Platelet Derived Growth Factor type AB (PDGF-AB) was measured by ELISA as an indicator of the behaviour of the peptide growth factor component. Combinations of scaffold, meniscal chondrocytes and PRP were tested for interaction, suitability and viability.

Experiments so far have shown good biocompatibility, in vitro, as meniscal chondrocytes were able to grow within the range of scaffolds produced. Cell retention could be enhanced by addition of PRP to the scaffolds. PDGF-AB was released over 5 days from the scaffold and PRP combination.

Further studies are in progress to derive relevant scaffold modifications and combinations for practical, robust, treatment strategies.

The aseptic loss of bone after hip replacement is a serious problem leading to implant instability. Hydroxyapatite coating of joint replacement components produces a bond with bone and helps to reduce loosening. However, over time bone remodeling at the implant interface leads to loss of hydroxyapatite. One possible solution would be to develop a coating that reduces hydroxyapatite and bone loss. Hydroxyapatite can be chemically modified through the substitution of ions to alter the biological response. Zinc is an essential trace element that has been found to inhibit osteoclast-like cell formation and decrease bone resorption. It was hoped that by substituting zinc into the hydroxyapatite lattice, the resultant zinc-substituted hydroxyapatite (ZnHA) would inhibit ceramic resorption and the resorption of bone. The aim of this work was to investigate the effect of ZnHA on the number and activity of osteoclasts.

Discs of phase pure hydroxyapatite (PPHA), 0.37wt% ZnHA and 0.58wt% ZnHA were produced, sintered at 1100 degrees Celsius and ground with 1200 grit silicon carbide paper. They were cultured in medium containing macrophage colony stimulating factor and receptor activator of nuclear factor kappa B ligand (RANKL) for 11 and 21 days. A control disc of PPHA cultured in medium containing no RANKL was also used. On the required dates the discs were removed and the cells stained for actin with phalloidin-TRITC and the cell nuclei with 4',6-Diamidino-2-phenylindole dihydrochloride. Cells with 3 or more nuclei were classed as osteoclasts and counted using ImageJ. On day 21 after the cells had been counted, the cells were removed and the discs coated in platinum before viewing with a scanning electron microscope. Resorption areas were then measured using ImageJ.

The addition of zinc was observed to significantly decrease the number of differentiated osteoclasts after 21 days (p<0.005 for 0.58wt% ZnHA compared to PPHA and p<0.01 for 0.37wt% ZnHA compared to PPHA). The area of resorption was also significantly decreased with the addition of zinc (p<0.005 for the comparison of 0.58wt% ZnHA with PPHA)

The work found that zinc substituted hydroxyapatite reduced the number and subsequent activity of osteoclasts.

Background

Mechanical trauma to articular cartilage is a known risk factor for Osteoarthritis (OA). The application of single impact load (SIL) to equine articular cartilage is described as a model of early OA changes and shown to induce a damage/repair response. Recombinant Human Fibroblast Growth Factor-18 (rhFGF-18) has been previously shown to have anabolic effects on chondrocytes in vitro. The aim of this in vitro study was to ascertain the effect of rhFGF-18 on the repair response of mechanically damaged articular cartilage.

Objectives

There is increasing application of bone morphogenetic proteins (BMPs) owing to their role in promoting fracture healing and bone fusion. However, an optimal delivery system has yet to be identified. The aims of this study were to synthesise bioactive BMP-2, combine it with a novel α-tricalcium phosphate/poly(D,L-lactide-co-glycolide) (α-TCP/PLGA) nanocomposite and study its release from the composite.

In vitro femoral studies have demonstrated the addition of hydroxyapatite (HA), to morcellised bone graft (MBG) decreases femoral prosthesis subsidence. However, with an increased risk of femoral fracture during the impaction of a MBG:HA mixture, possibly due to greater force transmission to the femoral cortex via the HA. The aim was to compare the hoop strains and subsidence of a 1:1 mixture of MBG:HA with pure bone allograft during impaction and subsequent endurance testing in a revision hip arthroplasty model.

Materials and methods Large Sawbone femurs were prepared to represent a femur with bone loss (Sawbones, Sweden). 12 uniaxial strain gauges were attached to each femur at 0, 90, 180 and 270 degrees, at distal, midshaft, proximal points to measure hoop strain. Impaction grafting was performed using X-Change 2 instruments and an Instron servohydaulic machine for 2 distal impactions and 4 proximal impactions for 60 impactions each.

Introduction

The annual incidence of fractures in the UK is almost 4%. Bone grafting procedures and segmental bone transport have been employed for bone tissue regeneration. However, their limited availability, donor site morbidity and increased cost mean that there is still a large requirement for alternative methods and there is considerable research into regeneration using bone morphogenetic proteins (BMPs). The aims of this study are to synthesise and combine BMP-2 with a novel nanocomposite and study its release.

Problems associated with allograft are well known. The addition of hydroxyapatite (HA) to allograft has various mechanical advantages, especially within revision arthroplasty. The mixing of bone and HA results in mechanical properties different from the individual parts. However, at present the changes in material properties the mix have not been fully investigated and the optimum mixing ratio not characterized. A compressive uniaxial chamber was used to investigate the change in mechanical properties occurring with the addition of HA in varying proportions to morcellised bone graft (MBG).

Introduction

The purpose of this study was to investigate whether combining PRP or concentrated bone marrow aspirate (CBMA) with a biphasic collagen/glycosaminoglycan (CG) scaffold would improve the outcome of the treatment of full thickness osteochondral defects in sheep.

Introduction: Platelet rich plasma (PRP) has been hypothesised to be of potential benefit to articular cartilage tissue engineering, through its release of autologous growth factors. The aim of this study was to ascertain whether the addition of thrombin is required to achieve platelet activation and sustained growth factor release in-vitro, when PRP is applied to a collagen based osteochondral scaffold.

Methods: Collagen/glycosaminoglycan scaffolds were fashioned, to which equal combined volumes of test substances were added (n=3): 500μl PRP; 375μl PRP + 125μl autologous thrombin (3:1); 455μl PRP + 45μl bovine thrombin (10:1). One ml of DMEM/F12 medium was added to each scaffold and changed completely at 12/24 hours, and 3/10 days, following which release of TGF-β1, PDGF-AB and bFGF were measured using ELISA. Secondly, equal sized collagen/glycosaminoglycan and polylactide co-glycolide scaffolds were fashioned to which 500μl of PRP were added (n=3). Similar conditions were followed as previously except that only PDGF-AB was assayed.

Results: A similar cumulative release profile of all growth factors was found over the 10 day period. An increase in growth factor release was seen in the PRP only group at all time points with PDGF-AB in particular reaching statistical significance at all time points (p< 0.006). These findings remained apparent when a correction for volume was made (p< 0.028) suggesting a particular role of the collagen in platelet activation. This was shown in the second experiment, in which a significantly increased cumulative volume of PDGF-AB was released from the collagen/glycosaminoglycan scaffold without thrombin activation (p< 0.04).

Discussion: This study shows that collagen is a potent activator of platelets, requiring no further addition to achieve satisfactory growth factor release when applied clinically. These results suggest that if PRP is combined with polymer scaffolds, it should be activated with thrombin to achieve optimum growth factor release.

Aims: Minimum ten year clinical, radiological and postmortem results of the flexible Cambridge Cup. This acetabular prosthesis was designed to replace the horseshoe shaped articular cartilage and provide physiological loading with minimal resection of healthy bone.

Method: Fifty female patients aged over 70 years with a displaced intra-capsular fracture of the femoral neck were recruited to the ethically-approved prospective study. They underwent implantation of the Cambridge Cup, which has an outer polybutyleneterephthalate shell and an inner UHMWPE bearing, with a Thompson-type hemiarthroplasty. The cups were manufactured with a 60μm plasma-sprayed coating of hydroxyapatite. This was removed from half the cups to simulate the effects of long-term HA resorption. Implants were sterilised by gamma irradiation in air. Independent clinical and radiological assessments were undertaken before discharge, at 6 weeks, one year, 18 months, two -, five-, seven- and ten years. Patients were scored using the Barthel Index, the Charnley-modified Merle d’Aubigne scores and latterly the Oxford hip score. The date and cause of death were obtained from hospital records and death certificates. Fifteen Cambridge Cups were retrieved post-mortem for histological and wear analysis

Results: The mean functional scores recovered to levels before fracture. These scores decreased with advancing age at five years. The mortality rates were 16%, 28%, 46% and 92% at 1, 2, 5 and 10 years. The Oxford hip scores in patients surviving between five and ten years were maintained.

The HA coated implants remained asymptomatic. Three uncoated components required revision for migration. No evidence of accelerated UHMWPE wear was seen on retrievals or radiographs. Histological analysis of the retrieved HA coated specimens showed excellent bony fixation, uncoated cups showed predominantly fibrous tissue.

Conclusion: The uncemented Cambridge Cup was implanted in a challenging environment of osteoporotic bone. Clinical, radiographic and post-mortem results up to ten years are excellent.

Introduction: Current treatment options for small, contained articular cartilage defects include microfracture, osteochondral autograft plugs or newer synthetic plugs. Chondromimetic is a novel biphasic biological scaffold composed of collagen and glycosaminoglycan. The addition of brushite provides the scaffold with a regionally specific component mimicking both phases of the osteochondral unit. The aim of this study was to show the efficacy of Chondromimetic in repairing a surgically created osteochondral defect in a caprine model.

Methods: Osteochondral defects were made in the lateral trochlear sulcus (LTS) and medial femoral condyle (MFC) of nine goats. Chondromimetic scaffolds (6x6mm) were inserted into each defect (n=6), while three controls had defects left empty (n=3). All animals were sacrificed at 26 weeks postoperatively. Macroscopic evaluations and quantitative stiffness properties were assessed. Histological sections were taken at approximately the centre of the defect, stained with Safrinin O/Fast Green and scored using a validated quantitative assessment tool.

Results: Macroscopically, the repair tissue scored higher in the MFC and LTS (p< 0.05) compared to controls. In all defects, the mechanical stiffness was found to be within one standard deviation of native cartilage, except that of the LTS controls. Histologically, the predominant tissue in the cartilage layer was deemed to be hyaline-like in three of six MFC defects, and five of six LTS defects according to the modified Sellers score. This was compared to one in three and zero of three in the MFC and LTS controls respectively.

Discussion: These results represent the early findings from an ongoing in-vivo study in which a further group of animals will be sacrificed at one year. At six months, the histology and mechanical properties are encouraging and should continue to improve with time. These results show that Chondromimetic may represent an acceptable alternative to marrow stimulation in the treatment of osteochondral defects.