Quadriceps tendon ruptures are a rare but debilitating injury resulting in loss of knee extension necessitating surgical intervention. Currently, multiple different surgical techniques and rehabilitation programs are utilized by surgeons. Researchers have been unable to determine the best surgical technique with respect to function and complication rate; certain techniques are more cost-effective than others. Early vs. late motion rehabilitation programs are utilized; recent evidence suggests that less aggressive initial rehabilitation may lead to decreased extensor lag and fewer additional surgeries. The goal of our study is to determine the treatment practices of orthopaedic surgeons across Canada.

Our study was completed anonymously via SurveyMonkey.com (Palo Alto, California). Based on current literature, a 26-question survey was distributed. E-mail invitations were be sent to all members of the Canadian Orthopaedic Association. Participation is voluntary.

Currently, 104 surveys have been completed. 78% of respondents utilize transosseous drill holes, 13% utilize suture anchors and 9% utilize a combined surgical technique. The majority of surgeons begin range of motion (ROM) at 2 weeks (42%) or 6 weeks (24%); ROM is then commonly progressed in a step-wise fashion at 2-week intervals (58%). Approximately half of respondents have performed revision surgery for quadriceps re-rupture.

Surgical management of quadriceps tendon ruptures is fairly consistent amongst Canadian orthopaedic surgeons. However, wide variation exists regarding rehabilitation, favoring early initiation and progression of ROM despite some evidence recommending a longer period of immobilization.

Rotator cuff tears are the most common cause of shoulder disability, affecting 10% of the population under 60 and 40% of those aged 70 and above. Massive irreparable rotator cuff tears account for 30% of all tears and their management continues to be an orthopaedic challenge. Traditional surgical techniques, that is, tendon transfers are performed to restore shoulder motion, however, they result in varying outcomes of stability and complications. Superior capsular reconstruction (SCR) is a novel technique that has shown promise in restoring shoulder function, albeit in limited studies. To date, there has been no biomechanical comparison between these techniques. This study aims to compare three surgical techniques (SCR, latissimus dorsi tendon transfer and lower trapezius tendon transfer) for irreparable rotator cuff tears with respect to intact cuff control using a clinically relevant biomechanical outcome of rotational motion.

Eight fresh-frozen shoulder specimens with intact rotator cuffs were tested. After dissection of subcutaneous tissue and muscles, each specimen was mounted on a custom shoulder testing apparatus and physiologic loads were applied using a pulley setup. Under 2.2 Nm torque loading maximum internal and external rotation was measured at 0 and 60 degrees of glenohumeral abduction. Repeat testing was conducted after the creation of the cuff tear and subsequent to the three repair techniques. Repeated measures analysis with paired t-test comparisons using Sidak correction was performed to compare the rotational range of motion following each repair technique with respect to each specimen's intact control. P-values of 0.05 were considered significant.

At 0° abduction, internal rotation increased after the tear (intact: 39.6 ± 13.6° vs. tear: 80.5 ± 47.7°, p=0.019). Internal rotation was higher following SCR (52.7 ± 12.9°, intact - SCR 95% CI: −25.28°,-0.95°, p=0.034), trapezius transfer (74.2 ± 25.3°, intact – trapezius transfer: 95% CI: −71.1°, 1.81°, p=0.064), and latissimus transfer (83.5 ± 52.1°, intact – latissimus transfer: 95% CI: −118.3°, 30.5°, p=0.400) than in intact controls. However, internal rotation post SCR yielded the narrowest estimate range close to intact controls. At 60° abduction, internal rotation increased after the tear (intact: 38.7 ± 14.4° vs. tear: 49.5 ± 13°, p=0.005). Internal rotation post SCR did not differ significantly from intact controls (SCR: 49.3 ± 10.1°, intact – SCR: 95% CI: −28°, 6.91°, p=0.38). Trapezius transfer showed a trend toward significantly higher internal rotation (65.7 ± 21.1°, intact – trapezius transfer: 95% CI: −55.7°, 1.7°, p=0.067), while latissimus transfer yielded widely variable rotation angle (65.7 ± 38°, intact – latissimus transfer: 95% CI: −85.9°, 31.9°, p=0.68). There were no significant differences in external rotation for any technique at 0° or 60° abduction.

Preliminary evaluation in this cadaveric biomechanical study provides positive evidence in support of use of SCR as a less morbid surgical option than tendon transfers. The cadaveric nature of this study limits the understanding of the motion to post-operative timepoint and the results herein are relevant for otherwise normal shoulders only. Further clinical evaluation is warranted to understand the long-term outcomes related to shoulder function and stability post SCR.

Reverse total shoulder arthroplasty (RSA) with glenoid bone grafting has become a common option for the management of significant glenoid bone loss and deformity associated with glenohumeral osteoarthritis. Despite the increasing utilization of this technique, our understanding of the rates of bone graft union, complications and outcomes are limited. The objectives of this systematic review are to determine 1) the overall rate of bone graft union, 2) the rate of union stratified by graft type and technique, 3) the reoperation and complication rates, and 4) functional outcomes, including range of motion (ROM) and functional outcome scores following RSA with glenoid bone grafting.

A comprehensive search of MEDLINE, Embase, and CINAHL databases was completed for studies reporting outcomes following RSA with glenoid bone grafting. Inclusion criteria included clinical studies with greater than 10 patients, and minimum follow up of one year. Studies were screened independently by two reviewers and quality assessment was performed using the MINORs criteria. Pooled and frequency-weighted means and standard deviations were calculated where applicable.

Overall, 15 studies were included, including nine retrospective case series (level IV), four retrospective cohort studies (level III), one prospective cohort study (level II) and one randomized control trial (level I). The entire cohort consisted of 555 patients with a mean age of 71.9±2.1 years and 70 percent female. The mean follow-up was 33.8±9.4 months. Across all procedures, 84.9% (N=471) were primary arthroplasties, and 15.1% (N=84) were revisions. The overall graft union rate was 89.2%, but was higher at 96.1% among studies that used autograft bone (9 studies, N=308). When stratified by technique, bone graft for the purposes of lateralization resulted in a 100% union rate (4 studies, N=139), while eccentric bone grafts used in asymmetric bone loss resulted in a lower union rate of 84.9% (10 studies, N=345). The overall revision rate was 6.5%, and was lowest following primary cases at 1.8% (11 studies, N=393). The pooled mean scapular notching rate was 20.1% (12 studies, N=497). Excluding notching, the pooled mean complication rate was 21.5% for all cases and 13% for primary cases (11 studies, N=393). When reported, there was significant improvement in post-operative ROM in all planes. There was also improvement in functional outcome scores, whereby the frequency-weighted mean Constant score increased from 25.9 to 67.2 (8 studies, N=319), ASES score increased from 34.7 to 75.2 (4 studies, N=142), and SST score increased from 2.1 to 7.6 (5 studies, N=196) at final follow up.

This review demonstrates that glenoid bone grafting with RSA results in good mid-term clinical and radiographic outcomes. Union rate appears to depend highly on graft type and technique, whereby the highest union rates were seen following the use of autograft bone for the purposes of lateralization. Interestingly, the union rate of autograft bone for the purposes of augmentation in eccentric bone loss is considerably lower and its impact on the long-term survivorship of the implant remains unknown.

Acute metatarsal fractures are a common extremity injury. While surgery may be recommended to reduce the risk of nonunion or symptomatic malunion, most fractures are treated with nonoperative management. However, there is significant variability between practitioners with no consensus among clinicians on the most effective nonoperative protocol, despite how common the form of treatment. This systematic review identified published conservative treatment modalities for acute metatarsal fractures and compares their non-union rate, chronic pain, and length of recovery, with the objective of identifying a best-practices algorithm.

Searches of CINAHL, EMBASE, MEDLINE, and CENTRAL identified clinical studies, level IV or greater in LOE, addressing non-operative management strategies for metatarsal fractures. Two reviewers independently screened the titles, abstracts, and full texts, extracting data from eligible studies. Reported outcome measures and complications were descriptively analyzed. Studies were excluded if a rehabilitation program outlining length of immobilization, weight-bearing and/or strengthening approaches was not reported.

A total of 12 studies (8 RCTs and 4 PCs), from the 2411 studies that were eligible for title screening, satisfied inclusion criteria. They comprised a total of 610 patients with acute metatarsal fractures, with a mean age of 40.2 years (range, 15 – 82). There were 6 studies that investigated avulsion fractures, 2 studies on true Jones fractures, and 4 studies with mixed fracture types. Studies assessed a variety of treatment modalities including: WB and NWB casts, elasticated support bandages, hard-sole shoes, plaster slippers, metatarsal shoe casts, and air cast boots. Most studies investigated the outcomes of NWB casts and elasticated support bandages.

The NWB short leg cast had no reported non-unions, delayed-unions, or refractures for avulsion fractures. In true Jones fractures, there was an average non-union rate of 23.6% (range, 5.6 – 27.8%), delayed-union rate of 11.8% (range, 5.6 – 18.8%), and refracture rate of 3% (range, 0 – 5.6%). Overall, the average AOFAS score was 87.2 (range, 84 – 91.7) and the average VAS score was 83.7 (range, 75 – 93).

The elasticated support bandage had an average non-union rate of 3.4% (range, 0 – 12%), and delayed-union rate of 3.8% for acute avulsion fractures, with no reported refractures. No included study arm investigated outcomes of elasticated support bandages for the true Jones fracture. The average AOFAS score for elasticated support bandages was 93.5 (range, 90 – 100). The average VAS score was 88.9 (range, 90 – 100).

Most acute metatarsal fractures heal well, with good-to-excellent functional outcomes and moderate-to-high patient satisfaction. Conservative strategies for avulsion fractures are highly successful and based on this data the authors recommend patients undergo a schedule that involves 3 – 4 weeks in an elasticated support bandage, short leg cast, or equivalent, and WB thereafter as tolerated, with return-to-activity after clinical union. Despite poorer conservative outcomes for true Jones fractures, patients should undergo 8 weeks in a NWB short leg cast, followed by a walking cast or hard-sole shoe for an additional 4 – 6 weeks, or until clinical union. However, surgical consultation is recommended.

Fibular head avulsion fractures represent a significant injury to the posterolateral corner of the knee. There is a high rate of concomitant injuries including rupture of the cruciate ligaments. Surgical fixation is indicated to restore stability, protect repaired or reconstructed cruciate ligaments and possibly decrease the likelihood of degenerative change. The current presentation describes a novel technique which provides secure fixation to the fibular head, restoring integrity of the posterolateral ligament complex and facilitating early motion. We also present a case series of our experience by a single surgeon at our tertiary referral center.

Twenty patients underwent open reduction and internal fixation between 2006 and 2016 using a large fragment cannulated screw and soft tissue washer inserted obliquely from the proximal fibula to tibia. Fixation was augmented with suture repair of the lateral collateral ligament and biceps tendon. The orientation of the fracture was assessed based on preoperative imaging. Repair / reconstruction of concomitant injuries was performed during the same procedure. Early range of motion was initiated at 2 weeks postoperatively under physical therapy guidance.

All patients returned for clinical and radiographic assessment (average 3.5 years). All fractures went on to bony union. There were no reoperations for recurrent instability. All patients regained functional range of motion with mean extension of 0.94 degrees and mean flexion of 121.4 degrees. Two patients underwent hardware removal. One patient developed a late local infection, which occurred greater than 5 years after surgery. Eleven patients underwent postoperative varus stress radiographs which demonstrated less than 1 mm difference between the operated and contralateral side. Fracture morphology typically demonstrated an oblique pattern in the coronal plane and a transverse pattern in the sagittal plane.

This study represents a novel surgical technique for the repair of fibular head avulsion fractures with a large fragment cannulated screw placed obliquely from the fibula to tibia. Fixation is augmented with a soft tissue washer and suture repair. Our results suggest that this technique allows for early range of motion with maintenance of reduction, high rates of union, and excellent postoperative stability.

Purpose

The anterior inferior tibiofibular ligament (AiTFL) is the primary lateral ligamentous stabilizer of the ankle syndesmosis. Current syndesmosis repair techniques traverse the tibia and fibula, but do not anatomically reconstruct the AiTFL. We compared a novel AiTFL anatomic repair technique (ART) to rigid syndesmosis screw fixation (SCREW).