Trunk muscles play an important role in supporting the spinal column. A decline in trunk muscle mass, as measured by bioelectrical impedance analysis (TMM–BIA), is associated with low back pain and poor quality of life. The purpose of this study was to determine whether TMM–BIA correlates with quantitative and functional assessments traditionally used for the trunk muscles.Background
Purpose
Surgical treatment of AIS includes several purposes such as arrest deformity progression through a solid fusion, obtain a permanent correction of the deformity and others. To evaluate the improvement of sagittal spinopelvic parameters and clinical outcomes in patients with adolescent idiopathic scoliosis 2 years after corrective surgery.Background
Objectives
Surgical-site-infections (SSI) prolong hospital stay, and they are leading nosocomial cause of morbidity and a source of excess cost. Recently, a waterless hand-rubbing protocol containing aqueous 1% chlorhexidine gluconate was developed before surgery, but there is no literature in orthopaedic surgery. The aim was to compare the SSI rates between waterless hand-rubbing and traditional hand-scrubbing protocol. STUDY 1: A total of 996 consecutive patients who underwent orthopaedic surgery between August 1, 2012 and January 31, 2014, were screened for SSI within 30 days after surgery. 500 patients from August 1, 2012 to April 1, 2013 were used by traditional hand-scrubbing, and 496 patients from June 1, 2013 to January 1, 2014 were by waterless hand-rubbing. STUDY 2: The twelve operating room staff members were randomly recruited, and the participants were assigned equally to use either a traditional hand-scrubbing protocol or a waterless hand-rubbing on 2 separate days. Washing times were recorded and microorganisms on hands were sampled on bacterial culture plates. Two days after sampling, the grown colonies were counted.[Introduction]
[Materials and Methods]
In 1970's, condylar type knee prosthese with anatomic design appeared, however, joint flexion was not satisfactory. Y/S II total knee arthroplasty (TKA) was developed to obtain deep flexion together with bilateral ligament balance in 1980. The articular surface of the tibial component was flattened to permit femoral shift posteriorily during knee flexion. Medial and lateral soft tissue release was determined by a unique ligament tensor both at flexion and extension. A metal tray was embedded in polyethylene, which had a shape of glasses frame. Though the usage of Y/SII TKA was finished in 1984, we here studied its long term surgical results using the Kaplan-Meyer method. From 1988 to 1991, 122 knees were replaced by Y/SII TKA in 81 patients with rheumatoid arthritis (RA). Among them, 24 joints in 12 patients were examined directly. The average age of follow-up was 19.5 years. The survival rate was investigated according to medical records.Back ground
Study design
Clinical outocome of revision total elbow arthroplasty(TEA) in rheumatoid arthritis(RA) patients were evaluated. Clinical outocome of revision TEA that underwent between 2005 and 2013 were evaluated. Causes of revision, implanted revised prosthesis, a clinical score (the Japanese Orthopaedic Association (JOA) elbow assessment score), the arc of motion and complications were investigated. Totally, 6 patients underwent revision TEA. The patients were females with a mean age of 60.4 years (range, 32 to 72).Purpose
Methods
Cup orientation of total hip arthroplasty (THA) is critical for dislocation, range of motion, polyethylene wear, pelvic osteolysis, and component migration. But, substantial error under manual technique has been reported specially in revision THA due to a bone loss and poor anatomical landmark. We have used three kinds of navigation systems for cup positioning in primary and revision THA. The purpose of this study is to evaluate the accuracy of navigation in revision THAs.INTRODUCTION
OBJECTIVES
Recently, as the number of total knee arthroplasty (TKA) is increasing, the number of revision TKA due to loosening or osteolysis is rapidly increasing. Large bone defect is one of the most critical issues during revision TKA. Therefore, early detection of bone loss around the TKA prosthesis before bone loss has been enlarged is very important. However, it is difficult to detect the loosening or ostolysis at the early stage around the femoral component even using fluoroscopically guided plain radiograph. A novel technique of tomography (Tomosynthesis; Shimazu Corporation, Kyoto, Japan) was introduced to detect the small bone loss. The purpose of this study was to examine, in a pig model of radiolucent line and osteolysis around TKA, the sensitivity and specificity of detection of radiolucent line and osteolysis using fluoroscopically guided plain radiographs and a novel technique of tomography. Six cemented femoral components (PFC Sigma; DePuy, Warsaw, IN, USA) were implanted in pig knees. Two components were implanted with standard cement technique (Standard model). Two components were implanted with 2 mm-thick defect between the cement and bone (Radiolucent line model). Two components were implanted with cystic defects (mean size = 0.7 cm3) in femoral condyles (Osteolysis model). The simulated bone lesions were filled with agarose to simulate granuloma tissue and to reduce the air artifact around the bone lesions, which can interfere with imaging techniques (Figure 1). Fluoroscopically guided plain radiographs (63 kV, 360 mA, 50 msec) were taken in 4 postures (antero-posterior, lateral, and +/−45 degrees oblique views) for each specimen (Figure 2). For Tomosynthesis, 74 frames were acquired in the rate 30 frames/sec with fixed X-ray condition (65 kV 1.25 mAs) and were reconstructed (Figure 3). Seven blinded assessors experienced in clinical radiographic analysis examined. The sensitivities, specificities and accuracy of the two imaging techniques were compared.INTRODUCTION
METHODS
Over the past decade, there has been an increase in the number of total knee arthropalsty (TKA). Demand of TKA for the young patients who often have high physical demands is also increasing. However, the revision rate in such young patients is much higher due to polyethylene (PE) wear and instability (Julin J, Acta Orthop 2010). Therefore, next generation total knee prostheses are expected to decrease PE wear and to provide stability. Although Patients who underwent bilateral staged TKAs were more likely to prefer medial pivot prosthesis or ACL-PCL retaining prosthesis than the other types of prostheses, because they feels “more stable overall” (Pritchett JW, J Arthroplasty 2011). The excellent mid-term clinical results of those newly introduced total knee prosthesis, such as alumina medial pivot TKA (Iida T, ORS 2008), medial pivot TKA (Mannan K, JBJS Br 2009, Kakachalions T, Knee 2009), ACL-PCL retaining TKA (Clouter JM, JBJS Am 1999), and highly cross-linked PE (Hodrick JT, CORR 2008), have been reported. From the point of view of
Total ankle arthrpoplasty (TAA) was performed frequently for ankle deformity caused by rheumatoid arthritis (RA) and osteoarthritis (OA). TAA has some advantages over ankle arthrodesis in range of motion (ROM). However, loosening and sinking of implant have been reported with several prostheses, especially constrained designs. Recently, we have performed mobile bearing TAA and report short term results of this prosthesis followed average 3 years. 20 total ankle prostheses were implanted in patients with RA (n=14) or OA (n=6) in 19 patients (5 male and 14 female, one bilateral), between 2005 and 2009. We used FINE total ankle arthroplasty that is mobile bearing system (Nakashima Medical Co., Ltd, Okayama, Japan). All patients were assessed for American Orthopaedic Foot and Ankle Society (AOFAS) score, ROM in plantar flexion and dorsiflexion at the point of pre-operation and final follow-up. We evaluated radiolucent line, sinking, and alignment of prostheses at final follow-up.Background
Method
There is many reports about complications with a resurfacing total hip arthroplasty (RHA). One of the most common complications is the femoral neck fracture. A notch and malalignment were risk factors for this. For an accurate implanting the femoral component in RHA, we performed 3D template and made a patient specific template (PST) using 3D printer and applied this technique for a clinical usage. We report a preliminary early result using this novel technique. We performed 10 RHAs in nine patients (7 male, 2 female) from June 2009 to March 2010 due to osteonecrosis in 7 hips and secondary osteoarthritis in 3hips with a mean age of 48 years (40-60). We obtained a volumetric data from pre-operative CT and planned using 3D CAD software. Firstly, size of femoral components were decided from the size planning of cups. We aimed a femoral component angle as ten degrees valgus to the neck axis in AP and parallel in lateral view avoiding a notch. We measured femoral shaft axis and femoral neck axis in AP and lateral view using 3D processing software. PSTs were made using Laser Sintering by 3D printer which had the heat tolerance for sterilization in order to insert the femoral guide wire correctly. We operated in postero-lateral approach for all the patients PST has the base (contact part) fit to poterior inter trochanteric area. It has the arm reached from the base and sleeve hole to insert the guide pin into the femoral head. We measured the femoral component angle in three dimensions using the 3D processing software postoperatively. We compared the difference of this angle and the pre-operative planed angles. We also investigated the operation time, the volume of bleeding during operation and complications.Introduction
material and method
Posterior approach to the lumbar spine necessarily induces structural damage of paravertebral muscles. In order to avoid these changes, we have started to utilize a microscopic decompression of the spinal canal via an unilateral approach since 1998. The purpose of this study was to evaluate the results of this operative procedure for lumbar spinal canal stenosis. A total of 18 patients, 13 men and five women, were reviewed. The age at the time of surgery ranged from 53years to 78years with a mean of 69.0years. Follow up period averaged 12.3months ranging from one to 32months. As for operative procedure, unilateral paravertebral muscle was retracted laterally and lam-inotomy in the approached side was performed. Following complete decompression of a nerve root in the approached side, microscope was tilted and the inner aspect of lamina in the contralateral side was resected using high-speed drill with a guard of yellow ligament to dural sac and nerve root. Following the procedure, yellow ligament was resected and nerve root in the contralateral side was decompressed. Results: In operation time, blood loss and recovery rate of JOA score, there were no statistical differences compared with ordinal laminotomy cases. Dural sac was well decompressed not only in the hemilaminec-tomy side but also in the contralateral side. All cases showed intensity change of paravertebral muscle in the approached side on T2 weighted MRI. Conclusion: The procedure described here was definitely effective because paravertebral muscle in the contralateral side and midline structure of the lumbar spine could be completely preserved.
