header advert
Results 1 - 20 of 30
Results per page:
Orthopaedic Proceedings
Vol. 104-B, Issue SUPP_11 | Pages 58 - 58
1 Nov 2022
Garg V Barton S Jagadeesh N
Full Access

Abstract

Background

Aim of this study is to determine the difference between re-operation rates after conventional Methods of fixation of patella fractures using Metallic implants and novel technique of all suture fixation using Ethibond or fiber tape.

Methods

This is a retrospective comparative analysis involving 62 patients who had a transverse patellar fracture and underwent surgery between January 2013 to December 2021. Selected patients were divided, based on different fixation methods used, into four groups - TBW group, CC screw group, Encirclage group and Suture Fixation Group. Patients were followed till bone union was evident on radiographs. Number of patients in Metallic implant group undergoing repeat operation were compared with the patients who underwent patella fracture fixation using all suture technique. Mean and standard deviation (SD) were calculated for all continuous variables. Mean of the two groups was compared using unpaired t-test.


Orthopaedic Proceedings
Vol. 102-B, Issue SUPP_7 | Pages 82 - 82
1 Jul 2020
Barton K Hazenbiller O Monument M Puloski S Freeman G Ball M Aboutaha A
Full Access

The burden of metastatic bone disease (MBD) in our Canadian cancer population continues to increase. MBD has a significant effect on patient morbidity, mortality, and health-related quality of life (HRQOL). There are various technical options used to surgically stabilize MBD lesions, surgical decision-making is variable and largely dependent on anatomic and surgeon-based factors. There is a paucity of research examining how surgical decision-making for MBD can be modified or individualized to improve quality of life (QOL) and functional outcomes, while more accurately aligning with patient-reported goals and expectations. The objective of this study was tosurvey MBD patients, support persons, physicians, and allied health care providers (HCP) with the goal of identifying 1) important contributors to HRQOL, 2) discordance in peri-operative expectations, and 3) perceived measures of success in the surgical management of MBD.

This project is a longitudinal patient-engaged research initiative in MBD. A survey was developed based on HRQOL themes in the literature and based on feedback from our patient research partners. Participants were asked to identify 1) important contributors to HRQOL and 2) perceived measures of success relevant to the surgical management of MBD. Participants were asked to rank themes from ‘extremely important’ to ‘not important at all’. Using open-ended questions, participants were asked to identify areas of improvement. Responses from the open-ended questions were analyzed by an experienced qualitative researcher using conventional content analysis. Participant's demographics were calculated using descriptive statistics. Concordance or discordance of perceived measure of success was assessed via a Chi-Square test of independence. All statistical analyses were performed using IBM SPSS® software.

Nine patients, seven support persons, 23 orthopaedic surgeons, 11 medical oncologists, 16 radiation oncologists, 16 nurses, and eight physiotherapists completed the survey. Regarding perceived measures of success, increased life expectancy (p Two main themes emerged around the timeliness of surgical care and the coordination of multidisciplinary care from patients and support persons. Patients and support persons expressed a sense of urgency in progressing to surgery/treatment, and frustration at perceived delays in treatment. Within coordination of care, patients and support persons would like clearer communication from the health care team.

There is discordance between patient/support person goals compared to physicians/HCP goals in the surgical management of MBD. Surgical decision-making and operative techniques that minimize disease progression and improve survival are important to MBD patients. Timely access to surgery/surgical consultation and improved multidisciplinary communication is important to patients. This data suggests improved peri-operative communication and education is needed for MBD patients. Furthermore, future research evaluating how modern orthopaedic surgical techniques influence survival and disease progression in MBD is highly relevant and important to patients with MBD.


Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_4 | Pages 31 - 31
1 Feb 2017
Jahani F Fisher J Barton D Brooks J Wilcox R Jones A
Full Access

Introduction

The performance of total hip replacement (THR) devices can be affected by the quality of the tissues surrounding the joint or the mismatch of the component centres during hip replacement surgery. Experimental studies have shown that these factors can cause the separation of the two components during walking cycle (dynamic separation) and the contact of the femoral head with the rim of the acetabular liner (edge loading), which can lead to increased wear and shortened implant lifespan1. There is a need for flexible pre-clinical testing tools which allow THR devices to be assessed under these adverse conditions. In this work, a novel dynamic finite element model was developed that is able to generate dynamic separation as it occurs during the gait cycle. In addition, the ability to interrogate contact mechanics and material strain under separation conditions provides a unique means of assessing the severity of edge loading. This study demonstrates these model capabilities for a range of simulated surgical translational mismatch values, for ceramic-on-polyethylene implants.

Methodology

The components of the THR were aligned and constrained as illustrated in Figure 1. CAD models of commercially available implant geometries were used (DePuy Synthes, Leeds, UK) modified for model simplicity by removing anti-rotation features.

The polyethylene cup liner was given elastic-plastic behaviour. An axial load following the Paul cycle pattern (5 repetitive cycles) with maximum of 3KN and swing phase load of 0.3KN, was applied through the cup holder. The effect of translational mismatch was implemented by using a spring element connected to the cup unit on the lateral side. The spring was compressed by a fixed amount to replicate a degree of medial-lateral mismatch of the components. The instantaneous resultant force vector dictated the dynamic sliding behaviour of the cup against the head. In this study, translational medial-lateral mismatch values of 1, 2, 3 and 4mm were used and the medial-lateral dynamic separation, contact pressure maps and plastic strain were recorded.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_1 | Pages 110 - 110
1 Jan 2016
De Burlet K Widnall J Barton C Gudimetla V
Full Access

Introduction

Enhanced Recovery Protocol (ERP) for elective total hip or total knee replacement has become the gold standard. The main principles are to reduce bleeding, both with a tranexamic acid infusion and local injection of adrenaline, and to reduce the risk of postoperative thrombo-embolic complications by early mobilisation, enabled by local anaesthetic infiltration at time of surgery. The aim of this study is to evaluate the impact of the ERP.

Methods

A retrospective review was performed including all patients who underwent primary hip or knee arthroplasty surgery between January 2011 and December 2013. The ERP was implemented in our department in August 2012 thus creating two cohorts; the traditional postoperative group and those undergoing ERP. Outcome measurements of length of stay, postoperative transfusion, thrombo-embolic complications and number of re-admissions were assessed.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_2 | Pages 2 - 2
1 Jan 2013
Foster P Barton S Jones S Britten S
Full Access

Introduction

Segmental tibia fractures are high-energy injuries that are difficult to treat. We report on the use of the Ilizarov Method to treat 40 consecutive AO42C (35) and AO42B3 (5) fractures by a single surgeon. Fractures with bone loss requiring transport were excluded, as were fractures initially treated with nail or plate.

Patients

28 adult males, 12 adult females, average age 43. The most common mechanism of injury was RTA (50%). 12 (30%) had associated injuries. 19 (48%) fractures were open (6 3A, 13 3B) and 21 closed. 24 (60%) had temporary monolateral external fixation before definitive treatment. The mean time from injury to definitive Ilizarov frame was 8 days.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLIII | Pages 70 - 70
1 Sep 2012
McKenzie J Barton T Linz F Barnet S Winson I
Full Access

The relationship between hindfoot and forefoot kinematics is an important factor in the planning of ankle arthrodesis and ankle arthroplasty surgery. As more severe ankle deformities are corrected, improved techniques are required to assess and plan hindfoot to forefoot balancing.

Gait analysis has previously been reported in patients with ankle arthritis without deformity. This group of patients have reduced intersegment motion in all measured angles. We have looked at a small group of patients with hindfoot deformity and ankle arthritis awaiting fusion or replacement.

Using the Oxford Foot Model we have assessed lower limb kinematics with a focus on hindfoot to forefoot relationships. The results of our pilot study are in variance to previous studies in that we have shown that in the presence of hindfoot/ankle deformity, the forefoot range of motion increases. We feel that these data may impact on surgical planning.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XLI | Pages 116 - 116
1 Sep 2012
Barton T Chesser T Harries W Gleeson R Topliss C Greenwood R
Full Access

Controversy exists whether to treat unstable pertrochanteric hip fractures with either intra-medullary or extra-medullary devices. A prospective randomised control trial was performed to compare the outcome of unstable pertrochanteric hip fractures stabilised with either a sliding hip screw or long Gamma Nail. The hypothesis was that there is no difference in outcome between the two modes of treatment.

Over a four year period, 210 patients presenting with an unstable pertrochanteric hip fracture (AO/OTA 31 A2) were recruited into the study. Eligible patients were randomised on admission to either long Gamma Nail or sliding hip screw. Follow-up was arranged for three, six, and twelve months. Primary outcome measures were implant failure or ‘cut-out’. Secondary measures included mortality, length of hospital stay, transfusion rate, change in mobility and residence, and EuroQol outcome score.

Five patients required revision surgery for implant cut-out (2.5%), of which three were long Gamma Nails and two were sliding hip screws (no significant difference). There were no incidences of implant failure or deep infection. Tip apex distance was found to correlate with implant cut-out. There was no statistically significant difference in either the EuroQol outcome scores or mortality rates between the two groups when corrected for mini mental score. There was no difference in transfusion rates, length of hospital stay, and change in mobility or residence. There was a clear cost difference between the implants.

The sliding hip screw remains the gold standard in the treatment of unstable pertrochanteric fractures of the proximal femur.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXIX | Pages 242 - 242
1 Sep 2012
Varghese M Ibrahim M Barton S Hopton B
Full Access

Introduction

Anterior cruciate ligament (ACL) rupture is a common sporting injury, often managed surgically with patella-tendon or hamstrings autograft. Surgeons are under increasing pressure for open transparent assessment of their performance. Scoring systems can be used to assess outcome. More than 50 different scoring systems have been identified to assess the ACL deficient knee.

Aims

The survey is investigating the use of ACL scoring systems between knee surgeons in the United Kingdom as a method of assessing performance.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXIX | Pages 59 - 59
1 Sep 2012
Lintz F Barton T Harries W Hepple S Millett M Winson I
Full Access

Background

Traditional measurements of hindfoot alignment are based on the tibio-calcaneal angle and do not take the forefoot into account. We have developed an algorithm based on standard radiographs to calculate calcaneal offset using Ground Reaction Force (GRF).

Hypothesis

The GRF algorithm measures hindfoot alignment without using the tibial axis


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXIX | Pages 81 - 81
1 Jul 2012
Haughton D Fountain J Barton-Hanson N
Full Access

Purpose

Investigate the functional outcome of medial patellofemoral ligament (MPFL) surgery for patella instability.

Compare functional outcome of direct MPFL repair and reconstruction using hamstring graft.

Methods

All patients that underwent MPFL surgery for patella instability between 2007-2010 were retrospectively identified from operative records. Patients were divided based on whether they underwent direct repair of MPFL, or reconstruction using hamstring graft. The Kujala scoring questionnaire for patellofemoral disorders (max score 100) was used to assess their functional outcome following surgery.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXII | Pages 61 - 61
1 May 2012
Lintz F Millett M Barton T Adams M
Full Access

Background

The Plantaris Longus Tendon (PLT) may be implicated in Achilles (AT) tendinopathy. Different mechanical characteristics may be the cause. This study is designed to measure these.

Methods

Six PLT and six AT were harvested from frozen cadavers (aged 65-88). Samples were stretched to failure using a Minimat 2000(tm) (Rheometric Scientific Inc.). Force and elongation were recorded. Calculated tangent stiffness, failure stress and strain were obtained. Averaged mechanical properties were compared using paired, one-tailed t-tests.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_IV | Pages 83 - 83
1 Mar 2012
Kerin C Barton C Shaylor P
Full Access

Introduction

Trochanteric bursitis is described as pain over the lateral side of the hip and thigh. The usual treatment is rest, administration of NSAIDs and injection of local anaesthetic and corticosteroid. Occasionally it is resistant to these measures.

Background

Whilst performing an ablation of the trochanteric bursa we noticed that the fascia lata looked particularly tight. Therefore a z-plasty of the fascia lata was performed.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_III | Pages 287 - 287
1 Jul 2011
Rees A Gajjar S Tawfiq S Barton-Hanson N
Full Access

Aim: The purpose of this study was to evaluate the results of transphyseal ACL reconstruction technique in skeletally immature patients.

Material & Methods: Between 2002 and 2008, twenty knees in twenty skeletally immature patients with a mean chronological age of 13.2 years (range, 7 to 16.2 years) underwent transphyseal reconstruction of the anterior cruciate ligament with use of an autogenous quadrupled hamstrings-tendon graft with metaphyseal fixation. Ten knees had additional meniscal surgery. The functional outcome, graft survival, radiographic outcome, and any growth disturbance were evaluated at a mean of 2.2 years (range, 1.0 to 5.9 years) after the surgery.

Results: No patient underwent revision anterior cruciate ligament reconstruction. The mean International Knee Documentation Committee subjective knee score (SD) was 90.5 (10.0) points and the mean Lysholm knee score was 92.2 (10.0) points. The result of the Lachman examination was normal in 18 knees and nearly normal in two; it was not abnormal or severely abnormal in any knee. The mean increase in total height was 7.2 cm (range, 1.2 to 20.4 cm) from the time of surgery to the time of final follow-up. No angular deformities of the lower extremity were measured radiographically, and no lower-extremity length discrepancies were measured clinically. Complications included one case of knee stiffness requiring physiotherapy, one case of persistent pain leading to medial menisectomy for tear and one case of re-injury five months post ACL reconstruction requiring medial meniscus repair.

Conclusion: Excellent functional outcome was noted in skeletally immature patients after transphyseal reconstruction of the anterior cruciate ligament with use of an autogenous quadrupled hamstrings-tendon graft with metaphyseal fixation. There were very few complications and no growth disturbance.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_I | Pages 33 - 33
1 Jan 2011
Barton T Gleeson R Topliss C Harries W Chesser T
Full Access

Controversy exists whether to treat unstable pertrochanteric hip fractures with either intramedullary or extramedullary devices. A prospective randomised control trial was performed to compare the outcome of unstable pertrochanteric hip fractures stabilised with either a sliding hip screw (SHS) or Long Gamma Nail (LGN). The hypothesis was that there is no difference in outcome between the two modes of treatment.

Over a four year period, 210 patients presenting with an unstable pertrochanteric hip fracture (AO/OTA 31 A2.1/A2.2/A2.3) were recruited into the study. Eligible patients were randomised on admission to either LGN or SHS. Follow-up was arranged for three, six, and twelve months. Primary outcome measures were implant failure and implant ‘cut-out’. Secondary measures included mortality, length of hospital stay, and EuroQol outcome score.

Five patients required revision surgery for implant cutout, of which three were LGNs and two were SHSs (no significant difference). There was a significant correlation between tip apex distance and the need for revision surgery. There were no incidences of implant failure or deep infection. Mortality rates between the two groups were similar when corrected for mini mental score. There was no difference between the two groups with respect to tip apex distance, hospital length of stay, blood transfusion requirement, and EuroQol outcome score.

The sliding hip screw remains the gold standard in the treatment of unstable pertrochanteric fractures of the proximal femur.


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_I | Pages 72 - 73
1 Jan 2011
Tarsuslugil S Hanlon C O’Hara R Dunne N Buchanan F Orr J Barton D Wilcox R
Full Access

Introduction: Computational modelling of the spine offers a particularly difficult challenge to analysts due to its complex structure and high level of functionality. Previous studies [Wijayathunga, 2008; Jones, 2007] have shown that finite element (FE) predictions of vertebral stiffness are highly sensitive to the applied boundary conditions and therefore validation requires careful matching between the experimental and simulated situation. The aim of this study was to develop and experimentally validate specimen specific FE models of porcine vertebrae in order to accurately predict the stiffness of single vertebra specimens.

METHOD: Nine single vertebra specimens were excised from the thoracolumbar region of two porcine spines. The specimens were mounted between two parallel PMMA housings and each specimen was imaged using a micro computed tomography (μCT) system (μCT80; Scanco Medical, Switzerland). In order to accurately match the experimental conditions, a radio-opaque marker was positioned on the specimen housing at the point of load application. The vertebrae were separated into two groups: a development set (set 1) consisting of three specimens and a validation set (set 2) of six specimens. Specimens from set 1 were used to establish the optimum method of conversion from image greyscale, to element material properties. The models in set 2 were used to assess the accuracy of the stiffness predictions for each model. The vertebrae were tested in a materials testing machine (AGS-10kNG; Shimadzu Corp., Japan) under axial compression and the stiffness for each specimen was calculated. The μCT data was imported into an image processing package (Scan IP, Simpleware, UK). The software enabled the images to be segmented and the vertebra, cement housings and position of load application to be identified. The segmented images were down-sampled to 1mm voxels, enabling a FE mesh to be generated (Scan FE; Simpleware, UK) based on direct voxel to element conversion. The Young’s modulus of each bone element was assigned, based on the greyscale of the corresponding image voxel. The PMMA housing plates were assigned homogeneous material properties (E = 2.45 GPa). Abaqus CAE 6.8 (Simula, Providence, Rhode Island, USA) was used for the processing and post-processing of all the models.

Results: The mean experimental stiffness was 4321 N/ mm (standard deviation = 415 N/mm). The optimum conversion factor was calculated for set 1, which yielded a root mean squared (RMS) percentage error of 7.5% when compared with the experimental stiffness. Using this optimised scale factor, FE models of specimens from set 2 were created. The predicted stiffnesses for set 2 were compared to the corresponding experimental values and yielded an RMS error of 10.1%.

Conclusion: The results indicate that specimen specific models can provide good agreement with the corresponding experimental specimen stiffness. In addition, the method employed in this study proved robust enough to be applied to vertebral tissue obtained from different animals of the same species. This method will now be developed to assess treatments for traumatic spinal injuries.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 426 - 426
1 Jul 2010
Bertram W Ahmad R Orpen N Barton T Nelson I Hutchinson J
Full Access

The main objective of our review was to access the inter-net websites providing information on non operative treatment of scoliosis and to assess the evidence for each treatment in the medical literature.

Methods: We identified top five search engines at the site www.searchengines.com. The search term “scoliosis treatment” was entered into each search engine. The websites were reviewed and each search engine produced from 145,354 to 5460,000 results. We identified twenty non operative treatments for scoliosis. We further evaluated and studied these non operative treatments by using each treatment as a search term. The accuracy of these treatments was checked by doing a medical literature review. We used Medline 1950 to November 2008 and Embase 1980 to November 2008.

Results: 260 websites were duplicated in the five search engines, 103 websites only mentioned surgical treatment of scoliosis, and 10 websites could not be accessed at the time of the study. We evaluated the remaining 127 websites using the key words “scoliosis treatment” to generate a list of twenty unique non operative scoliosis treatments. These treatments when entered individually into the search engines enabled us to produce a list of these treatments in decreasing order of frequency. This was based on the number of results that each treatment generated.

These treatments were then entered for search in Medline and Embase, only 45% (9/20) of these treatments were found to have been described in the medical literature.

Conclusion: Our study did reveal that information on non operative treatment of scoliosis leaves much to be desired. Based on this study we recommend that it is the duty of the treating surgeon to warn the patients of the potential danger of misinformation that is abundant on the internet.

Ethics approval: None

Interest Statement: None


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 383 - 383
1 Jul 2010
Orpen N Barton T Ahmad R Nelson I Hutchinson J
Full Access

Spinal lipomatosis is seldom reported in spinal literature and although the condition occurs commonly, we seldom recognise it in reviewing spinal MRI scans. We aim to highlight the condition and show MRI signs to allow easier recognition. We also introduce a new method of evaluation of the severity of the condition using T1 MRI axial views to evaluate the area of the spinal canal involved in the pathological process.

We have evaluated 30 patients with a diagnosis of spinal lipomatosis made on sagittal MRI scanning of the spine. The T1 and T2 axial images have been evaluated using standard digital software which allows calculation of the surface area occupied by fat and allows representation of this as a ratio to total canal diameter. This has then been correlated to the traditional method of classifying lipomatosis on sagittal MRI sequences.

We have found this method useful and believe it provides a more accurate representation of how fat in the canal may produce symptoms of nerve compression. This shows that the condition behaves more like our traditional understanding of spinal stenosis with symptoms more likely when the relationship of fat to canal reaches greater than 50%. This approach to spinal lipomatosis has not been described before but we feel produces a better understanding of the condition than we have had before by using a classification based on purely on sagittal MRI sequences.

Ethics approval: None Audit

Interest Statement: No conflict of interest


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_III | Pages 428 - 428
1 Jul 2010
Barton T Orpen N Ahmed R
Full Access

To identify changes in curve magnitude in patients with degenerative scoliosis between the lying and standing positions.

Thirty five patients who underwent surgical correction of a degenerative scoliosis were identified. The pre-operative standing antero-posterior radiographs were compared with the coronal MRI images and Cobb angles measured.

The mean patient age was 64 years old. The mean increase in Cobb angle in the degenerative curve on standing was ten degrees. This was not associated with age or magnitude of curve.

A degenerative scoliosis is often considered inflexible. These results show that such curves do retain some flexibility and therefore patients may present with dynamic symptoms not represented on supine MRI images. Furthermore, pre-operative supine radiographs will identify the degree of flexibility that can be expected intra-operatively.

Ethics approval: none

Interest statement: none


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_II | Pages 356 - 356
1 May 2009
Barton T Gash K Da Costa TM Bhattacharya
Full Access

Theatre discipline remains a vital adjunct in the fight against infection in joint replacement surgery. The aim of this audit was to compare local theatre practise in two hospitals with that which is recommended in the literature. Factors assessed included the correct use of the ‘plenum’, the application of hats and masks, the opening of theatre doors intra-operatively, and the number of staff in the theatre.

Results suggest that basic principles and practises of theatre antisepsis are not being adhered to during joint replacement surgery. Suggestions are made as to how theatre behaviour may be improved in order to optimise the operating environment.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_I | Pages 177 - 177
1 Mar 2009
Chambers C Barton T Bannister G
Full Access

Introduction: Radial shortening has been associated with a poor functional outcome following a fractured distal radius. Traditionally, outcome has been measured using doctor-based scores such as the Gartland and Werley Scoring System or modifications thereof.

Aims: The aim of this study is to compare patient based outcome scores with the Frykman class of the fracture and radial shortening both at injury and fracture union.

Methods: We followed up 60 patients over 55 who underwent closed reduction and k-wire fixation of distal radial fractures. Outcome was recorded by the Patient Rated Wrist Evaluation (PRWE) score, a validated subjective outcome measure.

Results: No association was found between radial shortening either at injury or fracture union with subjective outcome score but there was a significant association between Frykman Classification and outcome (p< 0.05).

Discussion: Our results showed that for distal radius fractures that united with a moderate degree of radial shortening, increasing Frykman Class was associated with a worse functional score.