Volar Locking Plates (VLP) have revolutionised the treatment of distal radius fractures allowing the anatomic reduction and stable fixation of the more comminuted and unstable of fractures. The benefits of this in terms of range of movement (ROM), pain and earlier return to work and daily activities is documented. However we were interested in was what improvements in wrist function patients made from 6 to 12 months after injury?

Distal radius fractures have an incidence rate of 17.5% among all fractures. Their treatment in case of comminution, commonly managed by volar locking plates, is still challenging. Variable-angle screw technology could counteract these challenges. Additionally, combined volar and dorsal plate fixation is valuable for treatment of complex fractures at the distal radius. Currently, biomechanical investigation of the competency of supplemental dorsal plating is scant. The aim of this study was to investigate the biomechanical competency of double-plated distal radius fractures in comparison to volar locking plate fixation. Complex intra-articular distal radius fractures AO/OTA 23-C 2.1 and C 3.1 were created by means of osteotomies, simulating dorsal defect with comminution of the lunate facet in 30 artificial radii, assigned to 3 study groups with 10 specimens in each. The styloid process of each radius was separated from the shaft and the other articular fragments. In group 1, the lunate facet was divided to 3 equally-sized fragments. In contrast, the lunate in group 2 was split in a smaller dorsal and a larger volar fragment, whereas in group 3 was divided in 2 equal fragments. Following fracture reduction, each specimen was first instrumented with a volar locking plate and non-destructive quasi-static biomechanical testing under axial loading was performed in specimen's inclination of 40° flexion, 40° extension and 0° neutral position. Mediolateral radiographs were taken under 100 N loads in flexion and extension, as well as under 150 N loads in neutral position. Subsequently, all biomechanical tests were repeated after supplemental dorsal locking plate fixation of all specimens. Based on machine and radiographic data, stiffness and angular displacement between the shaft and lunate facet were determined. Stiffness in neutral position (N/mm) without/with dorsal plating was on average 164.3/166, 158.5/222.5 and 181.5/207.6 in groups 1–3. It increased significantly after supplementary dorsal plating in groups 2 and 3. Predominantly, from biomechanical perspective supplemental dorsal locked plating increases fixation stability of unstable distal radius fractures after volar locked plating. However, its effect depends on the fracture pattern at the distal radius

Background. Volar locking plates have revolutionised the treatment for distal radius fractures. The DVR (Depuy) plate was one of the earliest locking plates which were used and they provided fixed angle fixation. Recently, newer volar locking plates, such as the Aptus (Medartis), have been introduced to the market that allow the placement of independent distal subchondral variable-angle locking screws to better achieve targeted fracture fixation. The aim of our study was to compare the outcomes of DVR and Aptus volar locking plates in the treatment of distal radial fractures. Methods. Details of patients who had undergone open reduction and internal fixation of distal radii from October 2007 to September 2010 were retrieved from theatre records. 60 patients who had undergone stabilisation of distal radius fractures with either DVR (n=30) or Aptus (n=30) plate were included in the study. Results. Mean age of patients undergoing fixation using DVR plate was 56.6 years (n=30) with 22 females and 8 males. Fractures in this group included 20 type 23-C, three type 23-B and seven type 23-A. The patients were followed up for an average of 5.5 months (2-16 months). 3 patients underwent revision of fixation due to malunion (n=1), non-union (n=1) and failure of fixation (n=1). Four patients had reduced movements even after intensive physiotherapy necessitating removal of plate. Mean age of patients undergoing Aptus volar locking plate fixation was 56.38 years (n=30) with 21 females and 9 males. There were 27 type 23-C, two type 23-B and one type 23-A fractures according to AO classification. The patients were followed up for an average of 4.1 months (2-11 months). 2 patients developed complex regional pain syndrome (CRPS) and 1 patient underwent removal of screws due to late penetration of screws into the joint. Conclusion. Complex and unstable fractures of the distal radius can be optimally managed with volar locking plates. Both systems are user friendly. Aptus plates provide an additional advantage of flexibility in implant positioning and enhanced intra-fragmentary fixation compared to the DVR plate. In our study Aptus plates had lower secondary surgical procedures compared to DVR plates

Aim: Volar locking plates are increasingly used in the management of distal radius fractures. As with any new implant, understanding the rate and type of potential metalwork related complications is important. The aim of the study was to determine the type and rate of implant related complications that require further surgery when using volar locking plates in the management of distal radius fractures. Methods: In this study, we reviewed 114 distal radius fractures treated with volar locking plating. Patient records were reviewed with regards to demographics, operative details and post-operative outcomes. Fractures were classified as intra-articular or extra-articular. They were further classified using the AO classification system. Results: In our series, 12 cases (10%) underwent further surgery for metal work related complications mainly for screw protrusion into the radiocarpal joint following fracture collapse. Intra-articular fractures had a significantly greater complication rate as compared to extra-articular ones (11 vs. 1, P=0.04). There was no significant difference between the three plating systems used in this series with regards to need of further surgery (P=0.43). There was no significant difference between the grade of the operating surgeon with regards to metal work complications (P=0.9). There was no difference in rate of complications between males and females (P=0.27). Similarly there was no difference in metal work complications between patients aged less than 60 as compared to those aged more than 60 years (P=0.58). Our study has shown that volar locking plates may be associated with up to 10% rate of metalwork complications requiring revision surgery. The most common (8 out of 12) cause of re-operation was to remove the screws protruding into the radio-carpal joint. Discussion: Our results suggest that volar locking plates are associated with a high rate of metal work related complications requiring further surgery. In conclusion our study suggests that volar locking plates are associated with high reoperation rates for implant related complications. Intraoperative screening to ensure that there is no intrarticular penetration is also essential. We favour obtaining intra-operatively a lateral view with the forearm elevated 15–20 degrees to the horizontal plane to allow for the medial-lateral radial inclination and taking the posterior-anterior view at about 20 degrees to the horizontal plane to allow for the normal volar distal radial tilt. We feel that for a common fracture such as distal radial fractures an ideal implant should be easily reproducible with a low complication rate

Purpose of the study: Defective reduction and secondary displacement after osteosynthesis of distal radius fractures can compromise wrist function. Volar locking plates enable solid fixation which remains stable over time but section of the pronator quadrates necessary for the anterior approach raises the risks of destabilising the distal radioulnar joint and loss of pronation force. Our study was designed to evaluate recovery of grip, pronation and supination force after volar locking plate fixation. Material and methods: This was a prospective study of 29 fractures of the distal radius with dorsal displacement fixed with a volar locking plate in 28 patients (17 men, 11 women, mean age 48.75 years) from January 2007 to May 2008. The quality of the pronator quadrates suture was assessed at the end of the operation. The assessment included the classical parameters of wrist movement, the Herzberg and Dumontier score, radial slope and ulnar variance on the ap and lateral views of the wrist, and recovery of grip, pronation and supination force compared with the opposite side using an ambulatory device. Results: The pronator quadratus suture was considered solid in eight cases, precarious in seven. Complete suture was not possible in 14 cases. At mean follow-up of 10 months, patients had on average recovered 77% of the grip force, 74% of the pronation force, and 76% of supination force, compared with the opposite side. Complications included one defective reduction, one secondary displacement (by defective plate position), two dystrophy syndromes, and four posttrauma carpal tunnel syndromes. Discussion: The literature shows that volar plate fixation enables recovery of 74% to 84% of grip force. Few studies have examined the recovery of pronosupination and none have described results after osteosynthesis for fracture. Our study did not find that section of the pronator quadrates, a muscle difficult to suture, had a deleterious effect. Conclusion: Osteosynthesis using a volar locking plate for distal fractures of the radius remains a controversial issue. Study of recovery of the grip, pronation and supination force did not reveal any prejudice attributable to this technique

There is theoretical concern that volar plating has a disadvantage in cantilever bending when axially loaded dorsal to the neutral axis. This has implications for postoperative rehabilitation protocols and overall outcomes related to maintenance of reduction. Most recent biomechanical studies have compared volar locking plates to traditional dorsal non-locked plates. The purpose of this study was to compare the biomechanical stability of volar and dorsal locking plate fixation in a model of dorsally unstable distal radius fractures. Fourteen synthetic composite radii (Pacific Research Laboratories, Vashon, WA) were used for this study. A dorsally unstable, extra-articular distal radius fracture was simulated by creating a dorsal wedge-shaped defect in the distal metaphysis. Half of the specimens were plated dorsally (n=7) while the other half were plated volarly (n=7) with 2.4mm distal radius locking T-plates (Synthes, Canada). Each specimen was loaded axially in five different positions: central (along the neutral axis of the radius) as well as dorsal, volar, radial and ulnar to the neutral axis using a MTS Sintech 1/G materials testing machine (MTS Systems, Eden Prairie, MN). The plated radii were loaded to 100 N in each position simulating physiological loading during normal range of motion. The main outcome measure was construct stiffness of the plate-bone system (slope of load-displacement curve) for all five loading positions. Construct stiffness with dorsal locking plates was seven times greater than volar locking plates when dorsally loaded (p < 0.001), 60% greater when centrally loaded (p = 0.055) and 35% greater when volarly loaded (p = 0.029). There was no significant difference in stiffness with any other loading configurations. The stability of dorsal locking plate fixation is superior to volar locking plate fixation in the setting of large dorsal defects in the distal radius. This is applicable to both fractures with dorsal comminution and dorsal opening-wedge distal radial osteotomies. Further clinical investigation is needed to compare functional outcomes and complication rates between modern dorsal and volar locking plate techniques

Purpose: This study compares clinical and radiological outcomes of K-wire fixation with volar locking plate (i.e. fixed angle) fixation in unstable, dorsally angulated, distal radius fractures. Materials and methodology: Fifty four adult patients with an isolated, closed, unstable, dorsally angulated fracture without articular comminution were randomised to closed reduction and K-wire fixation (3 wires) or volar locking plate fixation. All were immobilised in a cast for six weeks and prescribed physiotherapy. Independent clinical and radiological assessment was performed at 3 and 6 months post injury, using the DASH and Gartland & Werley scoring systems. Results: Twenty-four patients were treated with a plate and thirty with K-wires. There were no complications in the plate group. There were 9 complications in the K-wire group. Three patients required re-operation (for malunion, median nerve compression, and retrieval of a migrated wire). Remaining complications included: 5 pin-site infections and 1 superficial radial nerve palsy. Plate fixation achieved statistically significant better radiological and functional results. Conclusion: Volar locking plate fixation achieves better radiological and functional results with fewer complications than K-wire fixation in unstable, dorsally angulated, distal radius fractures

Distal radius fractures are the most common upper extremity injury, and are increasingly being treated surgically with pre-contoured volar-locking plates. These plates are favored for their low-profile template while allowing for rigid anatomic fixation of distal radius fractures. The geometry of the distal radius is extremely complex, and little evidence within the medical literature suggests that current implant designs are anatomically accurate. The main objective of this study is to determine if anatomic alignment of the distal radii corresponds accurately with modern volar-locking plate designs. Additionally, this study will examine sex-linked differences in morphology of the distal radius. Segmented CT models of ten female cadaver (mean age, 88.7 ± 4.57 years, range, 82 – 97) arms, and ten male cadaver (mean age, 86 ± 3.59 years, range, 81 – 91) arms were created. Micro CT models were obtained for the DePuy Synthes 2.4mm Extra-articular (EA) Volar Distal Radius Plate (4-hole and 5-hole head), and 2.4mm LCP Volar Column (VC) Distal Radius Plate (8-hole and 9-hole head). Plates were placed onto the distal radii models in a 3D visualization software by a fellowship-trained orthopaedic hand surgeon. The percent contact, volar cortical angle (VCA), border and overlap of the watershed line (WSL) were measured. Both sexes showed an increase in the average VCA measure from medial to lateral columns which was statistically significant. Female VCA ranged from 28 – 36 degrees, and 38 – 45 degrees for males. WSL overlap ranged from 0 – 34.7629% for all specimens without any statistical significance. The average border distance for females was 2.58571 mm, compared to 3.52411 mm for males, with EA plates having a larger border than VC plates. The border distances had statistically significant differences between the plate types, and was approaching significance between sexes. Lastly, a maximum percent contact of 21.966 % was observed in specimen F4 at a 0.3 mm threshold. No statistical significance between plate or sex populations was observed. This study investigated the incoherency between the volar cortical angle of the distal radius, and the pre-contoured angle of volar locking plates. It was hypothesized that if the VCA measures between plate and bone were unequal then there would be an increase in watershed line overlap, and decrease in percent contact between the surfaces. Our results agreed with literature, indicating that the VCA of bone was larger than that of the EA and VC pre-contoured plates examined in this study. With distal radius fracture incidences and prevalence on the rise for elderly female patients, it is a necessity that volar locking plates be re-designed to factor in anatomical features of individual patients with a particular focus on sex differences. New designs should focus on providing smaller head sizes that are more accurately tailored to the natural contours of the volar distal radius. It is recommended that future studies incorporate expertise from multiple surgeons to diversify and further understand plate placement strategies

Distal radial volar locking plating systems (DRVLP) are increasingly used for complex fractures of the distal radius. There have been limited studies on volar locking plating systems focusing on functional outcome and complications data. The aim of this study is to assess whether the surgeon can predict which fractures will have a good or poor outcome in terms of clinical, radiological and functional outcome assessment. Patients who sustained a distal radial fracture managed with a radial volar locking plate were identified from hospital audit data systems. Data was collected on all patients from patient notes including radiographs performed pre- and post-operatively and functional scores using the Patient Rated Wrist Evaluation score (PRWE). The study was approved by the Barwon Health Research and Ethics Advisory Committee. In total, there were 153 patients (105 female, 48 male) from all 11 surgeons in the unit. Patients ranged in age from 17 to 91 years, average age of 53.7 years at time of injury (IQR 41-70yr). A quarter had concomitant other injuries, and 60% had type C1-C3 fractures. Most of the patients (n = 147) had the AO Synthes DRVLP, six patients had other volar locking plate systems. Twenty-seven percent of patients (n = 42) had exogenous bone graft insertion for more unstable fracture patterns. The major complication rate was 12% (18/153) with 17 cases requiring further surgery. Post-operative radiographs demonstrated no increase in ulnar variance (median 0.0mm IQR 2.0 to1.0 mm) but an increase in radial inclination by 5 deg (IQR 0-12 deg), radial length by 3.5 mm (IQR 1.0-6.3 mm) and radial tilt by 17 deg (IQR 3-32 deg) (volar angulation) compared to pre-operative radiographs, which was statistically significant (all p<0.001). Ninety percent of patients returned a PRWE form with an average follow-up of 1.16 years (IQR 0.46-2.16yr). Median score for those aged less than 50 years was 14.00 (IQR 6.00-41.50) and did not differ from those greater than 50 years (median 16.00 IQR 4.50-36.00) (p = 1.00). PRWE score across groups categorised by classification of fracture showed large variance within each category and were not significantly different: Class A median 8.00 (IQR 3.50-26.25), Class B 13.00 (IQR 6.75-34.00) and Class C 17 (IQR 5.00-38.50) (p = 0.65). The majority of patients were female and had a type C fracture. Post-operative x-rays displayed an increase in radial inclination, length and tilt, and restoration of radial antatomy. PRWE scores were not different across age groups or classification of the fracture. This demonstrates that predictable outcomes can be achieved with volar locking plates despite fracture complexity if attention is paid to anatomical restoration of the radius, and in more unstable patterns with void support using injectable graft. Quadratus can act as an effective barrier to prominent hardware and superficial infection. Supination range may be reduced by this approach due to a tight repair, though a palmar DRUJ capsule contracture may also be an explanation

Distal radius fractures are very common and they often require surgical intervention to prevent long-term complications. We noticed that several patients were being managed non-operatively for prolonged periods of time, when ultimately surgical fixation was inevitable. Delayed fixation of these injuries results in prolonged immobilisation, repeat fracture clinic attendances, callous formation, poor soft tissues, stiffness and union. Our aim was to analyse the time to fixation of distal radius fractures at our hospital using a standard volar locking plate. Between December 2010 and September 2011, our study population included all patients who underwent surgical fixation for a distal radius fracture at Royal Derby Hospital. All fractures were fixed using a volar locking plate. Data collected included date of injury, fracture clinic attendances, date listed for surgery and date of surgery. There were 100 patients who underwent surgical fixation, with a mean age of 63.6 years (17 to 91). The mean date from injury to fixation was 7.7 days (range 0 to 23). 82% of fractures were operated on within 14 days, and 98% were fixed within 21 days. We accept that our study does have some limitations; this includes patients who are unwilling to accept surgery at their initial consultation. Distal radius fractures have a strong tendency to revert back to their original configuration; hence we suggest that a decision to operate should ideally be made at the one-week fracture clinic appointment. This avoids the difficulties and complications associated with delayed surgical intervention. Stability, displacement, reduction and patient factors should all be taken into account

Despite the variety of implants or techniques that exist to treat displaced distal radial fractures, the majority fail to provide sufficient stability to permit early functional recovery. However, locking plates have the advantage over other implants in that locking screws add considerably to the overall stability. The aim of this study was to assess the functional outcome of patients with displaced distal radial fractures treated with a volar distal radial locking plate (Synthes). During a two year period, details of 98 patients admitted to our unit with inherently unstable dorsally displaced distal radial fractures treated with volar locking plates were collected prospectively. For the purpose of this analysis, only those patients (55) with unilateral fracture, able to attend the study clinic at 6 months post-injury were considered. Patients were immobilised in wool and crepe for a 2 week period. The group consisted of 15 males and 40 females with an average age of 54 (28 to 83). At 6 months, patients' perceived functional recovery averaged 80%. Objective assessment was considered in relation to the uninjured side: grip strength 73%; pinch strength 83%; palmarflexion 77%, dorsiflexion 80%; radial deviation 74%; ulnar deviation 74%; pronation 93%, and supination 92%. Seven patients complained of symptoms relating to prominent metalwork. Good/excellent early subjective and objective functional recovery was made following open reduction and internal fixation using volar locking plates of dorsally displaced distal radial fractures. We suggest that objective assessment of grip strength and dorsiflexion can be used as a measure of patient perception of function

Historically the management of distal radial fracture has been often inadequate. It can be difficult to internally fix complex distal radial fractures with conventional plates. The fracture often collapses with metalwork failure. Literature suggests that malunion may lead to painful wrist with loss of function. In recent years fixed angle locking plate has been advocated for treatment of complex distal radius fracture. Our aim was to assess to assess the effectiveness of the volar locking plate (DePuy) in maintaining fracture reduction in distal radial fractures. Radiographs of 170 distal radius fractures treated by the DVR plate were analysed. Fractures were classified according to the Melone and AO classifications. The post injury, intra-operative, 6 weeks postoperative and final postoperative radiographs were reviewed to obtain measurements for radial height, radial slope and volar inclination. The measurements were correlated with fracture pattern, locking screw length, presence or absence of radial styloid screw and plate placement in relation to the wrist joint. The results were analysed statistically using Wilcoxon signed rank test. Radiologically there was minor loss of radial height, slope and volar inclination but this was not statistically significant. There was a statistically significant correlation between complexity of fracture and loss of radiological parameters. There was no statistically significant correlation between loss of radiological parameters and screw length, plate placement or presence or absence of radial styloid screw. The DVR volar locking plate appears to maintain a satisfactory reduction of the fracture except for some complex fractures with dorsal comminution in which case dorsoradial plates may be preferable

Purpose: The goal was to determine whether locking screws (LS) or smooth locking pegs (SP), optimize fixation of 4-part intraarticular distal radius fractures. The secondary goal was to determine which combinations of LS and SP influence construct stability. Method: In anatomic radius models, 4-part intraarticular distal radius fractures were fixed using volar locking plates. For the first part, 16 specimens were randomized to receive either 2 LS or 2 SP in each of the 3 pairs of holes in the plate. For the second part, 30 specimens were randomized to receive any 4 combinations of LS and SP in each of the 3 pairs of holes. Axial loading to failure was applied. Results: Constructs consisting of 4 SP within the lunate fragment were significantly weaker than constructs with 4 LS (mean 626.18 N vs. mean 980.76 N, p=0.01283). Constructs with SP in the ulnar positions of the lunate fragment were weaker than with LS in these positions (mean 736.73 N vs. 977.37 N respectively, p=0.00866). LS in the subchondral position of the lunate fragment were stronger than SP in these positions (mean 1226.99 N vs. 933.64 N, p= 0.00468) and any other combination (mean 1226.99 N vs. 941.97 N, p=0.0027). Conclusion: The use of LS as opposed to SP for 4-part intraarticular distal radius fractures, particularly subchondral and in ulnar side of the lunate fragment, optimizes construct stability. This may have implications on postoperative rehabilitation protocols and may limit costs related to the use of volar locking plates

Aim: To assess the ability of volar locking plates to maintain fracture reduction when used to treat dorsally displaced extra and intra-articular distal radial fractures. Methods: This prospective study was conducted over a 12 month period. Consenting patients who had sustained a closed, dorsally displaced distal radial fracture, treated by open reduction and internal fixation using a volar distal radial locking plate, were included in the study. Radial inclination, volar tilt and ulnar variance were measured from radiographs taken at least 3 months after surgery and compared with radiographs of the uninjured side. Only two of the eight participating surgeons have a specialist interest in upper limb surgery. Results: Thirty-three patients were included in the study. There were 23 females and 10 males. The mean age was 49.5 years, range 26–82 years. According to the OTA classification there were 19 Type A, 1 Type B and 13 Type C fractures. The mean restoration of volar tilt was 1° of under-correction, median 1.1° under-correction with a range of 7.3° of under-correction to 3.7° of over-correction, when compared with the uninjured side. The mean restoration of radial inclination was 1.9° of under-correction, median 1.6° under-correction with a range of 10° of under-correction to 8.4° of over-correction. As a group the mean ulnar variance was 0mm with a range of 2mm of relative ulnar shortening to 3.5mm of ulnar prominence when compared with the uninjured side. Conclusion: In the hands of general trauma surgeons, the volar approach combined with the application of a suitable volar locking plate is a good treatment for restoring and maintaining the anatomy of dorsally displaced intra and extra-articular distal radial fractures

Introduction: Distal radial volar locking plating systems (DRVLP) are commonly used for complex fractures of the distal radius in all ages. There have been few studies in the current literature that analyse the success of volar locking plating systems. Those studies with functional outcome and complications data have yet to be. The purpose of the study is assess whether the surgeon can predict which fractures will have a good versus a poor outcome in terms of clinical, radiological and functional outcome assessment. Method: Patients who sustained a distal radial fracture managed with a radial volar locking plate were identified from hospital audit data systems, after appropriate research ethical approval. Retrospective data was collected on all patients from patient case notes, radiographs performed pre- and postoperatively and functional data by completed patient rated wrist evaluation scores (PRWE). Demographic, clinical, radiographic and functional data was collected and statistically analysed by a bio-statistician. Results: 153 patients were included (116 female, 38 male). Patients were included from all 11 surgeons at the Geelong Hospital between November 2004 and February 2008. The age range was 17 to 91 years. Average age was 53.7 years at time of injury. 24% patients had concomitant other injuries. In terms of AO fracture classification 53% patients had type C1 – C3 fractures. 147 patients had the AO Synthes DRVLP, 6 patients had other volar locking plate systems. 27% patients had an exogenous bone graft insertion. The major complication rate was 12% (18/153) with 94% of these cases requiring further surgery. Post operative radiographs demonstrated an average increase in ulnar variance by 1.25mm, radial inclination by 7 deg, radial length by 4mm and radial tilt by 16 deg (volar angulation) compared to pre-operative radiographs that was statistically significant. 90% patients returned a PRWE form and. Discussion: Predictive parameters for a poor functional outcome were: men, dominant hand injury, other concomitant injuries, pre operative reduced inclination and volar tilit & high ulnar variance on radiographs. Poor functional outcome correlated with poor radiological outcome

The treatment of unstable distal radius fractures remains controversial. Volar locking plates provide stable fixation using the fixed angle device principle. More recently this technique has gained increasing popularity with several reports demonstrating good results. We present our experience from the first 259 patients performed at this institution. Method: Local Ethics Committee approval was obtained prior to the onset of the study. Theatre records and implant forms were used to recruit all patients in whom a Distal Volar Radius (DVR) Plate, (DePuy, Leeds, United Kingdom) was used for an unstable distal radius fracture between August 2005 and February 2008. Surgery was performed either by a consultant, or a specialist registrar. Two hundred and fifty nine consecutive patients were identified. Six patients had bilateral distal radius fractures. Patient records were reviewed, and each patient contacted via a postal questionnaire and Patient-Rated Wrist Evaluation (PRWE). Other outcome measures included return to work and complication rate. Results: Of the 259 patients 160 responses were received, response rate 62%. The mean follow up was 30.8 months, (Range 18–48). The mean age of the patients was 57.3 years (Range 16–93). The mean inpatient stay was 1.6 days, (mode 1 day). The median PRWE was 3; (range 0–83) and the mode was 0. Ninety four of the patients had a PRWE of ≤5. Seventy one out of 78 patients (91%) returned to the same job. The mean return to work was 40.6 days (SD37.5). There were 13 minor complications in total (7.8%). Six patients had extensor tendon irritation, of which two patients required extensor tendon reconstruction. One further patient had a spontaneous EPL rupture which was not associated with prominent metal work. Four (2.4%) patients had median nerve symptoms postoperatively. Two patients subsequently required carpal tunnel decompression, the other two settled spontaneously. Two (1.2%), patients developed Complex Regional Pain Syndrome. One patient developed a minor superficial wound infection. In all, 9 (5.4%) patients had removal of their metalwork, 6 for tendon irritation, 2 for wrist stiffness (one which was positioned too distally) and 1 for pin penetration into the joint. Discussion: Our results show that the DVR plate can be used reliably with good results and an early return to high levels of function. This is the largest series to date of the use of this distal volar locking plate

Aims: In recent years, volar locking plates have increased in popularity for the treatment of displaced distal radial fractures. The angular stability of the screws help maintain reduction permitting early mobilisation. The aim of this study was to assess functional outcome using both subjective and objective methods. Methods: The study was a prospective cohort study. Over a 2 year period 110 patients with closed, displaced distal radial fractures were considered suitable for treatment with the distal radius volar locking plate. Of these, 51 patients were followed up for a full 12 months. One year post-operatively all patients were reviewed and both subjective and objective measurements made:. Subjective:. Pain – visual analogue scale (VAS) (0 = no pain, 10 = worst pain ever). Overall function – patients’ perception – VAS (0 = no function, 100 = full function). Objective: Strength – grip and pinch – measured objectively as a percentage of the uninjured side. Range of Motion – Flexion, extension, pronation and supination – measured objectively as percentages of the uninjured side. For the purpose of this analysis, the fractures were divided into intra- and extra-articular fracture patterns based on the initial pre-operative X-rays. Results: The mean age was 55 years (28 – 83), 36 were female and 15 male. Of the fractures, 26 were extra-articular and 25 intra-articular. 28 of the 51 patients had a period of physiotherapy post-operatively. 23 patients were either not referred to physiotherapy or failed to attend. Subjectively 75% of patients had an excellent result with a pain VAS score of 0–1/10 (mean 0.9 for extra-articular and 1.2 for intra-articular) and an overall function VAS score of 9–10/10 (mean 92% for extra-articular and 86% for intra-articular). Objective outcome measures were also very good. The results for the extra-articular group showed a mean grip strength of 85%, a mean pinch grip of 91%, a mean flexion of 82%, a mean extension of 88%, a mean pronation of 98% and a mean supination of 98%. The results for intra-articular fractures showed a mean grip strength of 80%, a mean pinch grip of 88%, a mean flexion of 78%, a mean extension of 83%, a mean pronation of 94% and a mean supination of 93%. Conclusions: Overall patients made an excellent recovery. The majority of patients had little or no pain and almost complete return to function at 12 months post-operatively. Interestingly, individual patient demographics (age, sex, fracture type, physiotherapy) did not make a statistically significant difference to the outcome measures. This study confirmed excellent functional results comparable with other methods of fixation for extra-articular fractures, but it also showed good results with the more complex intra-articular fractures

Introduction: Distal radial fractures are common and sometimes surgery is necessary. The volar locking plate has become the standard solution in the last years in many hospitals but the method is unproven scientifically. In this series we have retrospectively followed our early cases of volar plates. Patients and Material: We identified all 68 patients (44 women and 9 men) at Lund University Hospital undergoing surgery using the TriMed. ®. volar fixed-angle plate for distal radius fracture between January 2006 and December 2007. The mean age was 57 years (20–84). The patients were contacted by mail and sent a Quick-DASH, a validated outcome questionnaire. Eleven patients were excluded according to the protocol due to having another concomitant or bilateral fractures or other complicating conditions like stroke or hemiparesis or psychiatric disorder. 53 of the remaining 57 patients completed the Quick-DASH and plotted their subjective function, pain at rest and at activity as well as the cosmetic appearance on a 0–100 mm visual analogue scale (VAS). 50 patients came to the hospital for an additional radiogram and measurement of the range of motion (goniometer) and grip strength (JAMAR). Results: Quick-DASH median was 4,5 (range 0–80), and mean 14. Seventeen (32%) of the patients had zero for VAS at rest. Ten (19%) had a DASH value of more than 30 implicating a less than satisfying result. Range of motion in de fractured wrists were 91% of the non-fractured and the grip strngth 82% of the contralateral. Discussion: In the present study the patients regained near full function in their fractured wrists after the operation with the volar locking plate. The ROM of the fractured wrists was 91% of the ROM of the non-fractured wrists, whereas the grip strength of the fractured wrists was 82% compared to the contralateral side. These data are excellent and similar both to previous own results as well as other published studies. The results of the Quick-DASH questionnaire, representing the subjective perception of the outcome, indicate that the patients are satisfied. Seventeen of the 53 patients scored zero on the DASH, suggesting a full recovery without any sequelae. In the population the median value is 2,5 (Abramo 2008). Ten of the patients had a DASH score over 30, indicating substantial subjective limitations in the daily life. Interestingly, there appears to be little or no correlation between high DASH scores and impaired ROM or grip strength. However, we noted that patients with high DASH scores also tended to score high in the VAS-question regarding subjective pain at activity. It was further noted that the patients with a DASH over 30 had a delay between injury and operation for a mean of 10,3 days (1–19 days) between injury and operation, compared to the patients with a DASH score below 30 who had a mean of 5,6 days (2–16 days) delay

Distal radius fracture is one of the most common fractures in older women (∼70,000 cases annually in Canada). Treatment of this fracture has been shifting toward surgery (mainly volar locking plate (VLP) technology), which significantly enhances surgeon's ability to maintain correction. However, current surgical outcomes are far from perfect. There is a need for an implant which maintains the corrected position (reduction), minimizes soft tissue disruption, and is technically easy to perform. A novel internal, composite-based implant was designed to achieve these ends. It is unclear, however, whether this novel implant offers similar fracture fixation as the VLP. As such, the objective of this research was to evaluate the fracture stability (assessed by calculating change in fracture length) of the novel implant and VLP under cyclic fatigue loading. Specimens: Seven radius specimens derived from older female cadavers (mean = 82.3 years, SD = 11.3 years) were used for the experiment. Preparation: A standardized dorsal wedge was removed from the cortex. The distance from the proximal and distal transverse osteotomies was 10 mm and was positioned 20 mm proximal to the tip of the radial styloid. The osteotomy removed all load-bearing capabilities of bone, equivalent to a worst-case-scenario for DRF fixation. Simulated Loading: The proximal end of the radii was potted (fixed) and positioned in a material testing system. To mimic natural loading conditions, hands were cycled between −30°/30° flexion/extension, at 0.5 Hz, for 2000 cycles, while tension load was applied to the tendons (25-N constant force per tendon, 100-N in total). Mechanical testing outcomes: A position tracking sensor used to measure change in fracture length. This change, as a function of number of cycles, was used to assess implant resistance to fatigue loading. Statistical Analysis: A paired student t-test was used to compare the change in fracture length. Level of significance was determined as 5% (p < 0.05). Changes in fracture fracture-length for both the novel implant and plate is shown in Table 1. The paired t-test indicated significant differences between the two groups in terms of change in fracture length (p = 0.026). The outcome of the novel implant ranged from very stable (change in fracture-length = 0.01 mm) to highly un-stable (2.88 mm). We believe the reason for this variance, at least in part, originates from the surgical procedures. Presumably, given that one very strong stabilization (0.01 mm) and one acceptable stabilization (0.37 mm) was obtained, future research directed towards surgical procedures may improve fracture stability. For any figures or tables, please contact authors directly

Distal radius fractures are the most common osteoporotic fractures among women. The treatment of these fractures has been shifting from a traditional non-operative approach to surgery, using volar locking plate (VLP) technology. Surgery, however, is not without risk, complications including failure to restore an anatomic reduction, fracture re-displacement, and tendon rupture. The VLP implant is also marked by bone loss due to stress-shielding related to its high stiffness relative to adjacent bone. Recently, a novel internal, composite-based implant, with a stiffness less than the VLP, was designed to eradicate the shortcomings associated with the VLP implant. It is unclear, however, what effect this less-stiff implant will have upon adjacent bone density distributions long-term. The objective of this study was to evaluate the long-term effects of the two implants (the novel surgical implant and the gold-standard VLP) by using subject-specific finite element (FE) models integrated with an adaptive bone formation/resorption algorithm. Specimen: One fresh-frozen human forearm specimen (female, age = 84 years old) was imaged using CT and was used to create a subject-specific FE model of the radius. Finite element modeling: In order to simulate a clinically relevant (unstable) fracture of the distal radius, a wedge of bone was removed from the model, which was approximately 10 mm wide and centered 20 mm proximal to the tip of the radial styloid. Bone remodeling algorithm: A strain-energy density (SED) based bone remodeling theory was used to account for bone remodeling. With this approach, bone density decreased linearly when SED per bone density was less than 67.5 µJ/g and increased when it was more than 232.5 µJ/g. When it was in the lazy zone (67.5 to 232.5 µJ/g), no changes in density occurred. Boundary conditions: A 180 N quasi-static force representing the scaphoid, and a 120 N quasi-static force representing the lunate was applied to the radius. The midshaft of the radius was constrained. FE outcomes: To examine the effects of stress shielding associated with each implant, the long-term changes of bone density within proximal transverse cross-sections of radius were inspected. The regional density analysis focused on three transverse cross-sections. The transverse cross-sections were positioned proximal to the subchondral plate, and were distanced 50 (cross-section A), 57 (cross-section B), and 64 mm (cross-section C) from the subchondral endplate. For both implants in all three cross-sections, cortical bone was reserved completely at the volar side. On the dorsal side, the cortical bone was completely resorbed in the VLP model. In all cross-sections, the averaged resultant density was higher for the “novel implant”. The difference ranged from 33% (cross-section A) to 36% (cross-section C) in favor of the “novel implant”. On average, the density values of the novel implant were 34% higher in transverse cross-sections (A, B, and C). This study showed that the novel implant offered higher density distributions compared to the VLP, which suggests that the novel implant may be superior to the VLP in terms of avoiding stress shielding