Aims

Revision total knee arthroplasty (rTKA) is a technically challenging and costly procedure. It is well-documented that primary TKA (pTKA) have better survivorship than rTKA; however, we were unable to identify any studies explicitly investigating previous rTKA as a risk factor for failure following rTKA. The purpose of this study is to compare the outcomes following rTKA between patients undergoing index rTKA and those who had been previously revised.

Aims

The aim of this study was to describe the pattern of revision indications for unicompartmental knee arthroplasty (UKA) and total knee arthroplasty (TKA) and any change to this pattern for UKA patients over the last 20 years, and to investigate potential associations to changes in surgical practice over time.

Aim. Antimicrobial resistance (AMR) aggravates an already difficult treatment of periprosthetic joint infections (PJI). The prevalence of drug-resistant pathogens varies across countries and increases over time. Regular monitoring of bacteriological analyses should be performed. Due to many factors influencing the AMR, the correct choice of antimicrobial management remains arguable. The primary purpose of this retrospective study was to identify and compare causative bacteria and to compare the incidence of antibiotic resistance between the septic revision total knee arthroplasty (TKA) and septic revision total hip arthroplasty (THA). Method. A review of all revision TKAs and revision THAs, undertaken between 2007 and 2020 in a tertiary referral centre, was performed. Included were cases meeting the consensus criteria for PJI, in which an organism has been identified. There were no major differences in tissue sampling between revision TKAs and revision THAs over time. Results. A total of 228 bacterial strains, isolated after revision TKA and THA, were analysed for their resistance to 20 different antibiotics. There was a statistically significant higher occurrence of Gram-negative bacteria (p=0.002) and Enterococcus species (p=0.026) identified after revision THAs compared to TKA. The comparison of antibiotic resistance between revision TKAs and revision THAs was statistically significant in 9 of 20 analysed antibiotics. Pathogens isolated after revision THA were much more resistant compared to pathogens isolated after revision TKA. Resistance in revision THAs was significantly higher to oxacillin (p=0.03), ciprofloxacin (p<0.001), levofloxacin (p<0.001), moxifloxacin (p=0.005), clindamycin (p<0.001), co-trimoxazole (p<0.001), imipenem (p=0.01), rifampicin (p=0.005) and tetracycline (p=0.009). There was no significantly higher resistance of pathogens isolated after revision TKAs detected. No statistically significant difference in antibiotic resistance of Gram-negative bacteria between revision TKA and revision THA was observed. Conclusions. The occurrence and the resistance of bacteria to antibiotics differs significantly between revision TKAs and revision THAs. This has implications on of the choice of empirical antibiotic in revision surgery as well as prophylactic antibiotic in primary surgery, depending on the joint that is to be replaced

Background. The knowledge about the common mode of failure and each period in primary and revision TKAs offers useful information to prevent those kinds of failure in each surgery. However, there has been limited report that simultaneously compared the mode of failure between primary and revision TKAs using single prosthesis. We compared the survival rate, mode of failure, and periods of each mode of failure between primary and revision TKAs. Methods. A consecutive cohort of 1606 knees (1174 patients) of primary TKA and 258 knees (224 patients) of revision TKA using P.F.C® prosthesis was retrospectively reviewed. The mean follow-up periods of primary and revision TKAs were 10.2 and 10.8 years, respectively. We compared the above variables between primary and revision TKAs. Results. The average 5-, 10-, 15-year survivor rate of primary TKA were 99.1% (CI 95%, ±0.3%), 96.7% (CI 95%, ±0.7%), and 85.4% (CI 95%, ±2.0%). They were 97.8% (CI 95%, ±1.0%), 91.4% (CI 95%, ±2.5%), and 80.5% (CI 95%, ±4.5%) in revision TKA. The common mode of failure included polyethylene wear, loosening, and infection in both primary and revision TKAs. The most common mode of failure was polyethylene wear in primary TKAs and infection in revision TKAs. The mean periods of polyethylene wear and loosening were not significantly different between primary and revision TKAs, but the mean period of infection was significantly long in revision TKA (4.8 years vs. 1.2 years, p=0.003). Conclusions. The survival rate decreased with time, especially after 10 years in both primary and revision TKAs. The continuous efforts are required to prevent and detect various modes of failure during the long-term follow-up after primary and revision TKAs. More careful attention is necessary to detect the late infection as a mode of failure after revision TKA. Level of Evidence. Level III, Therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence

Introduction. Revision total knee arthroplasty (revision TKA) occurs for a wide variety of indications and along with revision total hip arthroplasty is billed for using Diagnosis-Related Groups (DRGs) 466, 467, and 468 in the United States. However, DRGs do not account for revision etiology, a potentially substantial driver of cost. This study investigates revision TKA costs and 30-day complications by indication, employing both local granular as well as national standardized databases. Methods. Hospitalization costs and complication rates for 1,422 aseptic revision TKAs performed at a high-volume center between 2009 and 2015 were retrospectively reviewed. Additionally, charges for 28,173 revision TKAs in the National Inpatient Sample (NIS) were converted to costs using the Healthcare Cost and Utilization Project cost-to-charge ratios. 30-day complication rates for 3,450 revision TKAs were obtained using the American College of Surgeons National Surgical Quality Improvement Project (ACS-NSQIP). Costs and complications were compared between revision TKAs performed for the indication of fracture, wear/loosening, and instability with use of simultaneous and pairwise comparisons and a multivariable model accounting for American Society of Anesthesiologists (ASA) score, age, and sex. Results. Local hospitalization costs for fracture (median, $30,643) were significantly higher than those for wear/loosening ($24,734; p < 0.001) or instability ($22,932; p < 0.001), with differences remaining significant even after adjusting for patient comorbidities (p < 0.001). Local fracture patients were admitted for an average of 1.9 days longer (mean length of stay [LOS]: 4.8 days; IQR: 3 – 6) than instability patients (mean LOS: 2.9; IQR: 2 – 3; p < 0.001) and 1.7 days longer than wear/loosening patients (mean LOS: 3.1, IQR: 2 – 3; p < 0.001) but had similar 30-day orthopedic-specific complication rates (10.8%) as compared to instability (11.2%; p > 0.999) and wear/loosening (15.9%; p = 0.333). Nationally, NIS costs for fracture (median, $31,207) were higher than those for other aseptic indications (wear/loosening: $21,747; instability: $16,456; p< 0.001). Combined medical and surgical complication rates for fracture (56.6% of patients with ≥1 complication) were significantly higher than those for wear/loosening (19.7%) and instability (15.5%) (p < 0.001), with 3.5 – 5.4 fold increased transfusion rates (45.7% fracture, 13.2% wear/loosening, 8.5% instability; p < 0.001) and 1.2 – 3.3 fold increased urinary tract infection rates (2.3% fracture, 0.7% wear/loosening, 1.9% instability; p = 0.004). Discussion and Conclusion. Hospitalization costs for revision TKA for fracture were 37% to 50% higher than for all other aseptic revision TKAs, both locally and nationally. This increased cost persisted even after multivariable comorbidity adjustment, the current approach for DRG assignment for both revision TKA and THA reimbursement. Indication-specific coding and reimbursement systems are necessary to maintain sustainable access to revision TKA for all patients. For figures, tables, or references, please contact authors directly

Background. As life expectancy increases, the number of octogenarians requiring primary and revision total knee arthroplasty (TKA) is increasing. Recently, primary TKA has become a common treatment option in octogenarians. However, surgeons are still hesitant about performing revision TKA on octogenarians because of concerning about risk- and cost-benefit. The purpose of this study was to investigate postoperative complications and mid-term survival in octogenarians following primary and revision total knee arthroplasty (TKA). Methods. We retrospectively reviewed 231 primary TKAs and 41 revision TKAs performed on octogenarians between 2000 and 2016. The mean age was 81.9 for primary TKA and 82.3 for revision TKA (p=0.310). The American Society of Anesthesiologists (ASA) score was not different, but the age-adjusted Charlson comorbidity index was higher in revision TKA (4.4 vs. 4.8, p=0.003). The mean follow-up period did not differ (3.8 vs. 3.5 years, p=0.451). The WOMAC scores and range of motion (ROM) were evaluated. The incidence of postoperative complication and survival rate (end point; death determined by telephone or mail communication with patient or family) were investigated. Results. The postoperative WOMAC and ROM were better in primary TKA (33.1 vs. 47.2, p<0.001; 128.9° vs. 113.6°, p<0.001). The most common postoperative complication was delirium in both groups (7.4% vs. 14.6%, p=0.131). There were no differences in the specific complication rates between the two groups. The 5- and 10-year survival rates were 87.2% and 62.9%, respectively, in primary TKA and 82.1% and 42.2%, respectively, in revision TKA (p=0.017). Conclusions. Both primary and revision TKAs are viable options for octogenarians when considering the clinical results and mid-term survival. Delirium needs to be managed appropriately as the most common complication in both primary and revision TKAs for octogenarians

Introduction. Metaphyseal cones with cemented stems are frequently used in revision total knee arthroplasties (TKAs). However, if the diaphysis has been previously violated (as in revision of a failed stemmed implant), the resultant sclerotic canal can impair cemented stem fixation, which is vital for cone ingrowth and long-term fixation. We report the outcomes of our novel solution to this problem, in which impaction grafting and a cemented stem in the diaphysis was combined with an uncemented metaphyseal cone for revision TKAs with severely compromised bone. Methods. A metaphyseal cone was combined with diaphyseal impaction grafting and cemented stems in a novel fashion for 35 revision TKAs. Mean age at revision TKA was 70 years, with 63% being male. Patients had a mean of 4 prior knee arthroplasty procedures. Indications for the revision with this construct were aseptic loosening (80%) and two-stage re-implantation for periprosthetic infection (PJI; 20%). Mean follow-up was 3 years. Results. Survivorship free from revision of the cone/impaction grafting construct due to aseptic loosening was 100% at 5 years. Survivorships free from any revision of the cone/impaction grafting construct and free from any reoperation were 92% and 73% at 5 years, respectively. Six knees (17%) required a reoperation (4 for infection/wound issues and 2 for periprosthetic fractures). Radiographically, 97% of cones were ingrown (1 loose cone in setting of PJI). In all but one case, impacted diaphyseal bone graft appeared to have incorporated radiographically. Conclusions. When presented with a sclerotic diaphysis and substantial metaphyseal bone loss, this innovative technique combining diaphyseal impaction grafting with a metaphyseal cone provided near universal success in regards to implant fixation. Moreover, radiographs revealed incorporation of the bone graft, and ingrowth of the cones. While long-term follow-up is required, this novel technique provides an excellent option in the most difficult of revision TKAs. For figures, tables, or references, please contact authors directly

Introduction. Vancomycin is a prophylactic antibiotic used to protect against methicillin resistant staph aureus. Recent literature has suggested that using intraosseus (IO) infusions are capable of providing improved local tissue concentrations compared to intravenous (IV) access. The purpose of this study is to evaluate clinical outcomes of patients who received pre-operative IO vancomycin for total knee arthroplasty (TKA). Methods. Patients who received IO vancomycin (500mg vancomycin in 200ml NS) as standard of care from September 1, 2018 to March 1, 2019 were retrospectively evaluated. This data was compared to primary and revision TKAs performed immediately prior to the initiation of IO administration. Evaluation included pre and post-op creatinine values, tourniquet time (TT), and knee-related 30 and 90-day complications. Data for primary and revision TKA cases were analyzed independently. Results. Final analysis had 100 primaries and 29 revisions in the control (IV) and 100 primaries and 19 revisions in the intervention (IO) arm. 30 and 90-day complications were not significantly different in primaries, while decreased 30–day complications for revisions approached significance (control=17.2%, intervention=10.5%). 90-day complications were decreased in the revision group receiving IO (Control=27.6%, Intervention = 0%; p=0.015). No cases of Redman Syndrome were identified. No increase in post-operative creatinine values occurred. TT was increased by 1.87min in the PI, which was not statistically significant (p=0.10). Discussion / Conclusion. We've demonstrated IO vancomycin is a safe and effective alternative to using pre-operative IV vancomycin. This is one of the largest series to date evaluating the clinical outcomes while using IO antibiotics pre-operatively in TKA. Patients who receive IO vancomycin have equivalent or improved 30 and 90-day complication rates, significantly so in revision TKAs. In addition, this study evaluated longer-term outcomes of revision TKAs that are provided IO vancomycin, proving it may be appropriate to extend indications. For figures, tables, or references, please contact authors directly

Introduction. Tibial cones are often utilized in revision total knee arthroplasty (TKA) with metaphyseal defects. However, there are few studies evaluating outcomes out to five years with a sufficient cohort. The purpose of this study was to evaluate implant survivorship and complications in revision TKAs with tibial cones. Methods. A retrospective review was completed from September 2006 through March 2018 evaluating 149 revision TKAs that received a tibial cone. The mean follow-up was 5.3 years. According to the AORI classification: 8% were 1, 18% were 2A, 55% were 2B, and 19% were 3. Results. Survival analysis at 6 years showed 96% free of revision for aseptic tibial loosening, 85% free of tibial component revision for any reason, and 72% free of reoperation. Eleven knees had progressive radiolucent lines with eight having tibial construct migration on serial radiographs. Aseptic tibial loosening was associated with significant tibial bone loss, AORI 3 (p=0.0001). Tibial component revision for any reason was associated with AORI 3 (p=0.013) and a pre-revision diagnosis of reimplantation after PJI (p<0.0001). Four knees had revision for aseptic tibial loosening, 12 knees had revision of the tibial construct for reasons other than aseptic loosening (11/12 were for PJI), and 15 knees had reoperation for reasons other than tibial construct revision. Conclusions. Revision TKA with tibial cones had excellent survivorship free of revision for tibial construct aseptic loosening, 96% at 6 years. Patients receiving a tibial cone construct at the time of reimplantation for PJI were at increased risk for tibial construct revision

Introduction. Mechanical or corrosive failure of total knee arthroplasties (TKAs) is difficult to diagnose with current laboratory and radiographic analyses. As such, the goal of this study was to determine the mean blood concentration of cobalt, chromium, and titanium in a series of revision TKAs with mechanical implant failure and evaluate whether they facilitated identification of the underlying TKA failure mechanism. Methods. Serum cobalt, chromium, and titanium levels and synovial fluid characteristics were evaluated in 12 patients (13 aseptic revision TKAs) who underwent revision TKA between 2000 and 2020 at a single academic institution for mechanical implant failure or corrosion. Seventy-five percent were re-revisions of previously revised TKAs. Mean time to revision was 6 years. Modular metallic junctions were present in 100%. Twenty-five percent did not have another in situ total joint arthroplasty, and the remaining patients did not have a metal-on-metal articulation that could lead to elevation in serum metal ion levels. Mean follow-up after the revision TKA was 8 months. Results. Mean serum cobalt, chromium, and titanium concentrations were 11 ng/mL, 6 ng/mL, and 3 ng/mL, respectively. Serum metal ion levels facilitated failure mechanism identification in 75%, which included modular junction failure (6 cases), constraint locking mechanism failure (3 cases), corrosion of modular metallic interfaces (2 cases), and implant fracture (1 case). Arthrocentesis was performed in 75%. Mean synovial fluid cell count was 950 cells/mcL. Monocytes were the predominant mean cell type (41%), followed by neutrophils (35%), and lymphocytes (22%). Conclusion. Serum metal ion assessment should be considered when the etiology of painful primary or revision TKAs, particularly those with modular metallic junctions, remains elusive after routine evaluation

Introduction. Arthrofibrosis remains a persistent complication following total knee arthroplasty (TKA). Although manipulation under anesthesia (MUA) is an effective early treatment, the risks and value of this procedure beyond 3 months after TKA remain controversial. The purpose of this study was to examine the safety and efficacy of late MUAs for arthrofibrosis. Methods. From our institutional total joint registry, 82 TKAs (77 patients) who underwent MUA >3 months after primary (83%) or revision (17%) TKA were identified. Mean time to MUA was 7 months: 66% performed between 4–6 months, 18% between 7–12 months, 16% beyond 12 months. MUAs were coupled with arthroscopic assistance in 26% (12% limited lysis of adhesions, 13% formal arthroscopic debridement). Mean age was 61 years, 59% females, and mean BMI was 33kg/m. 2. Mean follow-up was 5 years. Results. No fractures, extensor mechanism disruptions, or other complications related to late MUA occurred. The mean ROM gained after MUA was 18° (76° to 94°, p<0.001). Substantial ROM gains (≥20°) occurred in 50%, while 21% made no gains or lost ROM after MUA. ROM gains ≥20° occurred in 54% of primary TKAs and 28% of revision TKAs. While ROM gains were higher when performed between 3–6 months (21°) compared to 6–12 months (13°) and >12 months (11°), these differences did not reach statistical significance (p=0.26). No differences in mean ROM gains were observed in MUAs performed with or without arthroscopic assistance (19° versus 15°, p=0.54). Kaplan Meier survivorship free of repeat MUA and revision TKA were 85% and 80% at 20 years, respectively. Conclusion. Late MUA, coupled with arthroscopic assistance in selected patients, was safe in a broad range of stiff primary and revision TKAs with no fractures or extensor disruptions occurring. While mean ROM improvements were modest, a substantial subset of patients achieved clinically important ROM gains ≥20°. Summary. Late MUA substantially improved ROM in a subset of patients with stiff TKAs and was done safely. In selected patients, arthroscopic lysis of adhesions or formal debridement aided the perceived safety and efficacy

Introduction. Metaphyseal fixation during revision total knee arthroplasties (TKAs) is important, but potentially challenging with historical cone designs. Material and manufacturing innovations have improved the size and shape of cones available, and simplified requisite bone preparation. In a very large series, we assessed implant survivorship, radiographic results, and clinical outcomes of new porous 3-D printed titanium metaphyseal cones featuring a reamer-based system. Methods. We reviewed 142 revision TKAs using 202 cones (134 tibial and 68 femoral) from 2015 to 2016. Sixty cases involved tibial and femoral cones. Most cones (149 of 202; 74%) were used for Type 2B or 3 bone loss. Mean age was 66 years, with 54 % females. Mean BMI was 34 kg/m. 2. Patients had a mean of 2.4 prior surgeries and 48% had a history of periprosthetic infection. Mean follow-up was 2 years. Results. At 2 years, survivorship free of cone revision for aseptic loosening was 100% and free of cone revision for any reason was 98%. Survivorships free of any component revision and any reoperation were 90% and 83%. Five cones had been revised at latest follow-up: 3 for infection, 1 for periprosthetic fracture, and 1 for aseptic tibial loosening. Radiographically, three unrevised femoral cones appeared loose in the presence of hinged implants, while the remainder of cones appeared stable. All cases of cone loosening occurred in Type 2B or 3 defects. Mean Knee Society scores improved from 50 preoperatively to 87 at latest follow-up (p<0.001). Three intraoperative fractures with cone impaction (two femoral, one tibial) all healed uneventfully. Conclusion. Novel 3-D printed titanium cones, with an efficient mill system, yielded excellent early survivorship and few complications in difficult revision TKAs with severe bone loss. The diversity of cone options, relative ease of preparation, and outcomes rivaling prior cone designs support the continued use of these modern cones. For figures, tables, or references, please contact authors directly

Introduction: Common failure modes of revision total knee arthroplasty (TKA) include aseptic component loosening and damage to constraining mechanisms which are often required in revision TKA. Mobile-bearing (MB) revision TKA components have been developed in hopes of lessening these failure mechanisms. Our objective was to evaluate the early clinical outcomes for the use of MB in revision TKA with a minimum 2-year follow-up and to evaluate bearing complications. Methods: Retrospective clinical and radiographic evaluation of 84 MB revision TKAs with minimum 2-year follow-up was performed. Revision TKAs were performed using PFC Sigma and LCS revision rotating platform implants (Depuy, Warsaw, IN). Indications for revision include aseptic loosening (31 knees), instability (30 knees), failed unicompartmental knee replacement (8 knees), infection reimplantation (7 knees), arthrofibrosis (3 knees), chronic hemarthrosis (3 knees), failed patellofemoral replacements (1 knees), and nonunion of a supracondylar femur fracture (1 knee). Results: At a mean follow-up of 3.7 years, the average Knee Society clinical and function scores had increased from 50.3 points preoperatively to 89.1 points and from 49.3 points to 80.1 points, respectively. Average motion improved from 99.8° preoperatively to 116.5° postoperatively. Radiographic review demonstrated excellent fixation with no evidence of component loosening upon latest follow-up. No cases of bearing instability were observed. Conclusion: This evaluation of 84 MB revision TKAs has demonstrated favorable early results at a mean follow-up of 3.7 years with no occurrence of bearing instability. Longer follow-up is required to evaluate for potential advantages of reducing polyethylene wear, lessening fixation stresses, and protection of constraining mechanisms

Aim. Despite several synovial fluid biomarkers for diagnosis of periprosthetic joint infection (PJI) have being investigated, point-of-care (POC) tests using these biomarkers are not widely available. Synovial calprotectin has recently been reported to effectively exclude diagnosis of PJI and a novel lateral flow POC test using it has shown potential to be effective. Thus, the aims of this study were to 1) validate calprotectin POC with enzyme linked immunosorbet assay (ELISA) 2) at 2 separate thresholds for PJI diagnosis in total knee arthroplasty (TKA) patients using the 2013 Musculoskeletal Infection Society (MSIS) PJI diagnosis criteria as the gold standard. Method. Intraoperative synovial fluid samples were prospectively collected from 123 patients who underwent revision TKAs (rTKA) at two academic hospitals within the same healthcare system from October 2018 to January 2020. The study was conducted under IRB approval. Included patients followed the hospital standard for their PJI diagnostic work-up. Data collection included demographic, clinical, and laboratory data in compliance with MSIS criteria. Synovial fluid samples were analysed by calprotectin POC and ELISA tests in accordance with manufacturer's instructions. Patients were categorized as septic or aseptic using MSIS criteria by two independent reviewers blinded to calprotectin assay results. The calprotectin POC and ELISA test performance characteristics were calculated with sensitivities, specificities, positive, and negative predicted values (PPV and NPV, respectively) and areas under the curve (AUC) for 2 different PJI diagnosis scenarios: (1) a threshold of >50 mg/L and (2) a threshold of >14 mg/L. Results. According to MSIS criteria, 53 rTKAs were septic while 70 rTKA were aseptic. In the (1) >50 mg/mL threshold scenario, the calprotectin POC and ELISA performance showed 100% agreement with sensitivity, specificity, PPV, NPV, and AUC, respectively, of 98.1%, 95.7%, 94.5%, 98.5%, and 0.969. In the (2) >14 mg/mL threshold scenario, the POC slightly outperformed the ELISA with sensitivity, specificity, PPV, NPV and AUC of 98.1%, 87.1%, 85.2%, 98.4%, and 0.926, respectively (ELISA values were 98.1%, 82.9%, 81.3%, 98.3%, and 0.905, respectively). Conclusions. The calprotectin POC test performed as well as the ELISA at the >50mg/L threshold and was slightly better at the >14 mg/L threshold. The >50 mg/L threshold had a better specificity while maintaining the same sensitivity as the >14 mg/L threshold. This test could be effectively implemented as a rule out test. However, further investigations with larger cohorts are necessary to validate these results

During revision total knee arthroplasty (rTKA), proximal tibial bone loss is frequently encountered and can result in a less-stable bone-implant fixation. A 3D printed titanium alloy (Ti6Al4V) revision augment that conforms to the irregular shape of the proximal tibia was recently developed. The purpose of this study was to evaluate the fixation stability of rTKA with this augment in comparison to conventional cemented rTKA. Eleven pairs of thawed fresh-frozen cadaveric tibias (22 tibias) were potted in custom fixtures. Primary total knee arthroplasty (pTKA) surgery was performed on all tibias. Fixation stability testing was conducted using a three-stage eccentric loading protocol. Static eccentric (70% medial/ 30% lateral) loading of 2100 N was applied to the implants before and after subjecting them to 5×103 loading cycles of 700 N at 2 Hz using a joint motion simulator. Bone-implant micromotion was measured using a high-resolution optical system. The pTKA were removed. The proximal tibial bone defect was measured. One tibia from each pair was randomly allocated to the experimental group, and rTKA was performed with a titanium augment printed using selective laser melting. The contralateral side was assigned to the control group (revision with fully cemented stems). The three-stage eccentric loading protocol was used to test the revision TKAs. Independent t-tests were used to compare the micromotion between the two groups. After revision TKA, the mean micromotion was 23.1μm ± 26.2μm in the control group and 12.9μm ± 22.2μm in the experimental group. There was significantly less micromotion in the experimental group (p= 0.04). Prior to revision surgery, the control and experimental group had no significant difference in primary TKA micromotion (p= 0.19) and tibial bone loss (p= 0.37). This study suggests that early fixation stability of revision TKA with the novel 3D printed titanium augment is significantly better then the conventional fully cemented rTKA. The early press-fit fixation of the augment is likely sufficient for promoting bony ingrowth of the augment in vivo. Further studies are needed to investigate the long-term in-vivo fixation of the novel 3D printed augment

Background. Subvastus approach for Total Knee Arthropalsty (TKA) allows a faster recovery. It is traditionally not utilized for revision surgeries because of difficulty in exposure of the knee and eversion of the patella. It is considered to have limited indications. We hypothesized that revision TKA should not really pose a problem as the exposure gained is adequate with added advantage of preserving the extensor mechanism, thereby allowing faster functional recovery. We present an analysis of the use of subvastus approach for revision TKAs. Materials and methods. 50 patients (50 knees) 37 females + 13 males with mean age 68 years underwent revision total knee arthroplasty (TKA) by subvastus approach between January 2006 to January 2013. All patients were prospectively evaluated by pre- and postoperative Knee Society and function score. The average follow-up was 24 months (range from 1 to 3 years) with minimum 1 year follow-up. The indications for revisions were aseptic loosening (20 knees), infection (12 knees), instability (12 knees) and peri-prosthetic fractures (6 knees). Constrained condylar prosthesis (43 knees), hinged prosthesis (6 knees) and custom made prosthesis (1 knee) were fixed using the subvastus approach. Infected knees underwent one or two staged revisions. Results. The approach provided adequate exposure in all revisions. The average Knee Society score improved from 42 to 83 and the function score from 48 to 65. The complications included medial collateral ligament injury (one case), patellar tendon avulsion (one case) and mal-tracking patella (one case). Average hospital stay was 4 days. Average blood lose was 400 ml. Conclusion. Our results compare favourably with other reported series on revision TKA. The subvastus approach can be considered for revision TKAs

Introduction:. Revision total knee arthroplasty (TKA) can be very complex in nature with difficulties/obstacles involving bone and soft tissue deficits, visualization and exposure, as well as alignment and fixation. Auxiliary devices such as augmentation and offset adapters help address these issues; however they increase the complexity of the reconstruction. The objective of this study was to show that use of a single radius revision TKA system allowing for minimal auxiliary revision devices can yield positive early clinical outcomes. Methods:. This data was collected as part of a prospective, post-market, multicenter study. One hundred and twenty-five single radius revision TKA cases were evaluated. Surgical details were reviewed and cases were grouped based on type of auxiliary devices used. Group 1 included cases that used only femoral and/or tibial augments. Group 2 used femoral and/or tibial augments in conjunction with femoral and/or tibial offset adapters. Early clinical outcomes, operative data and radiographic findings were used to compare cases. Results:. At 6 weeks and 1 year postoperatively, Knee Society Scores, pain, function and quality of life all improved more in Group 1 (augments only) than Group 2 (augments and offset adapters). There was no difference in range of motion postoperatively for either group. Preoperative demographics showed no differences between Group 1 and Group 2. Offset adapters were used in only 17.6% of the cases. Discussion/Conclusion:. Studies have discussed the increase in complexity of revision TKAs is associated with a decrease in patient outcomes. The surgical technique for revision TKAs can be more difficult due to an increase in bone loss and anatomical changes. Augment usage is the main auxiliary component utilized to supplement bone loss. By design, this single radius revision system limits the additional need for offset adapters to adjust patient alignment, while achieving excellent postoperative patient outcomes. Reducing the amount of devices needed for reconstruction decreases the intraoperative complexity and has shown improved functional outcomes with this single radius revision TKA system

Introduction: Althoug the advantages of partial revision in hip replacement are well-documented, the effectiveness of this treatment strategy has not been established in revision TKA. The purpose of this study is compare the results of tibial component versus full–component (Miller-Galante II-MG II to Constrained Condylar Knee-CCK) revision TKA for wear-related problems. Materials and Methods: A retrospective review was used to identify who had partial revision TKA. Over a 10-year period, 55 revision TKAs were completed. All the primary arthroplasties were MG II hybrid primary arthroplasties (uncemented femoral component, cemented tibial component, cemented patellar resurfacing). Twenty-five partial revisions (tibial component and polyethylene exchange) and 30 full-component revision TKAs were done. The average follow-up was 5.2 years. Knee Society clinical scores were used to compare patients who had tibial revision with patients who had full-component revision. Results: The average Knee Society score for full component revisions was 85 compared to 63 for partial revisions (significant difference). Discussion and Conclusion: We recommend caution in doing isolated tibial revisions in which retaining the femoral component limits the surgeon options to properly balance the knee. Full revision should be done if there is any question regarding ligamentous balancing or equalization of flexion and extension gaps

Nutritional Status and Short-Term Outcomes Following THA; Initial Metal Ion Levels Predict Risk in MoM THA; THA Bearing Surface Trends in the US ‘07- ’14; Dislocation Following Two-Stage Revision THA; Timing of Primary THA Prior to or After Lumbar Spine Fusion; Failure Rate of Failed Constrained Liner Revision; ESR and CRP vs. Reinfection Risk in Two-Stage Revision?; Mechanical Complications of THA Based on Approach; Impaction Force and Taper-Trunnion Stability in THA; TKA in Patients Less Than 50 Years of Age; Post-operative Mechanical Axis and 20-year TKA Survival and Function; Return to Moderate to High-intensity Sports after UKA; “Running Two Rooms” and Patient Safety in TJA; Varus and Implant Migration and Contact Kinematics after TKA; Quadriceps Snips in 321 Revision TKAs; Tubercle Proximalization for Patella Infera in Revision TKA; Anterior Condylar Height and Flexion in TKA; Compression Bandage Following Primary TKA; Unsupervised Exercise vs. Traditional PT After Primary TKA and UKA

Introduction. Within the reconstruction of unicondylar femoral bone defects with morselized bone grafts in revision total knee arthroplasty (TKA), a stem extension appears to be critical to obtain adequate mechanical stability. Whether the stability is still secured by this reconstruction technique in bicondylar defects has not been assessed. Long, rigid stem extensions have been advocated to maximize the stability in revision TKAs. The disadvantage of relatively stiff stem extensions is that bone resorption is promoted due to stress shielding. Therefore, we developed a relatively thin intramedullary stem which allowed for axial sliding movements of the articulating part relative to the intramedullary stem. The hypothesis behind the design is that compressive contact forces are directly transmitted to the distal femoral bone, whereas adequate stability is provided by the sliding intramedullary stem. A prototype was made of this new knee revision design and applied to the reconstruction of uncontained bicondylar femoral bone defects. Materials and Methods. Five synthetic distal femora with a bicondylar defect were reconstructed with impacted bone grafting (IBG) and this new knee revision design. A custom-made screw connection between the stem and the intercondylar box was designed to lock or initiate the sliding mechanism, another screw (dis)connected the stem. A cyclically axial load of 500 N was applied to the prosthetic condyles to assess the stability of the reconstruction. Radiostereometry was used to determine the migrations of the femoral component with a rigidly connected stem, a sliding stem and no stem extension. Results. We found a stable reconstruction of the bicondylar femoral defects with IBG in case of a rigidly connected stem. After disconnecting the stem, the femoral component showed substantially more migrations. With a sliding stem rotational migrations were similar to those of a rigidly connected stem. However, the sliding stem allowed proximal migration of the condylar component, thereby compressing the IBG. Discussion. A stable reconstruction of uncontained bicondylar femoral defects could be created with IBG and a TKA with a thin stem extension. It appeared that the presence of a functional stem extension was important for the stability of the bicondylar reconstruction. In an effort to reduce stress shielding, we developed a sliding stem mechanism. This sliding stem provided adequate stability, while compressive contact forces are still transmitted to the distal femoral bone. Clinical studies have to confirm that our sliding stem mechanism leads to long term bone maintenance after revision TKAs