Aims. The evidence demonstrating the superiority of early MRI has led to increased use of MRI in clinical pathways for acute wrist trauma. The aim of this study was to describe the radiological characteristics and the inter-observer reliability of a new MRI based classification system for scaphoid injuries in a consecutive series of patients. Methods. We identified 80 consecutive patients with acute scaphoid injuries at one centre who had presented within four weeks of injury. The radiographs and MRI scans were assessed by four observers, two radiologists, and two hand surgeons, using both pre-existing classifications and a new MRI based classification tool, the Oxford Scaphoid MRI Assessment Rating Tool (OxSMART). The OxSMART was used to categorize scaphoid injuries into three grades: contusion (grade 1); unicortical fracture (grade 2); and complete bicortical fracture (grade 3). Results. In total there were 13 grade 1 injuries, 11 grade 2 injuries, and 56 grade 3 injuries in the 80 consecutive patients. The inter-observer reliability of the OxSMART was substantial (Kappa = 0.711). The inter-observer reliability of detecting an obvious fracture was moderate for radiographs (Kappa = 0.436) and MRI (Kappa = 0.543). Only 52% (29 of 56) of the grade 3 injuries were detected on plain radiographs. There were two complications of delayed union, both of which occurred in patients with grade 3 injuries, who were promptly treated with cast immobilization. There were no complications in the patients with grade 1 and 2 injuries and the majority of these patients were treated with early mobilization as pain allowed. Conclusion. This MRI based classification tool, the OxSMART, is reliable and clinically useful in managing patients with acute scaphoid injuries. Cite this article: Bone Jt Open 2022;3(11):913–920

Aims. Hand trauma, consisting of injuries to both the hand and the wrist, are a common injury seen worldwide. The global age-standardized incidence of hand trauma exceeds 179 per 100,000. Hand trauma may require surgical management and therefore result in significant costs to both healthcare systems and society. Surgical site infections (SSIs) are common following all surgical interventions, and within hand surgery the risk of SSI is at least 5%. SSI following hand trauma surgery results in significant costs to healthcare systems with estimations of over £450 per patient. The World Health Organization (WHO) have produced international guidelines to help prevent SSIs. However, it is unclear what variability exists in the adherence to these guidelines within hand trauma. The aim is to assess compliance to the WHO global guidelines in prevention of SSI in hand trauma. Methods. This will be an international, multicentre audit comparing antimicrobial practices in hand trauma to the standards outlined by WHO. Through the Reconstructive Surgery Trials Network (RSTN), hand surgeons across the globe will be invited to participate in the study. Consultant surgeons/associate specialists managing hand trauma and members of the multidisciplinary team will be identified at participating sites. Teams will be asked to collect data prospectively on a minimum of 20 consecutive patients. The audit will run for eight months. Data collected will include injury details, initial management, hand trauma team management, operation details, postoperative care, and antimicrobial techniques used throughout. Adherence to WHO global guidelines for SSI will be summarized using descriptive statistics across each criteria. Discussion. The Hand and Wrist trauma: Antimicrobials and Infection Audit of Clinical Practice (HAWAII ACP) will provide an understanding of the current antimicrobial practice in hand trauma surgery. This will then provide a basis to guide further research in the field. The findings of this study will be disseminated via conference presentations and a peer-reviewed publication. Cite this article: Bone Jt Open 2024;5(4):361–366

Aims. The aim of this study was to develop a core outcome set of what to measure in all future clinical research on hand fractures and joint injuries in adults. Methods. Phase 1 consisted of steps to identify potential outcome domains through systematic review of published studies, and exploration of the patient perspective through qualitative research, consisting of 25 semi-structured interviews and five focus groups. Phase 2 involved key stakeholder groups (patients, hand surgeons, and hand therapists) prioritizing the outcome domains via a three-round international Delphi survey, with a final consensus meeting to agree the final core outcome set. Results. The systematic review of 160 studies identified 74 outcome domains based on the World Health Organization International Classification of Functioning, Disability, and Health. Overall, 35 domains were generated through thematic analysis of the patient interviews and focus groups. The domains from these elements were synthesised to develop 37 outcome domains as the basis of the Delphi survey, with a further four generated from participant suggestions in Round 1. The Delphi survey identified 20 outcome domains as ‘very important’ for the core outcome set. At the consensus meeting, 27 participants from key stakeholder groups selected seven outcomes for the core outcome set: pain/discomfort with activity, pain/discomfort with rest, fine hand use/dexterity, self-hygiene/personal care, return to usual work/job, range of motion, and patient satisfaction with outcome/result. Conclusion. This set of core outcome domains is recommended as a minimum to be reported in all clinical research on hand fractures and joint injuries in adults. While this establishes what to measure, future work will focus on determining how best to measure these outcomes. By adopting this patient-centred core outcome set, consistency and comparability of studies will be improved, aiding meta-analysis and strengthening the evidence base for management of these common and impactful injuries. Cite this article: Bone Jt Open 2023;4(2):87–95

Aims

Osteoarthritis (OA) affecting the thumb carpometacarpal joint (CMCJ) is a common painful condition. In this study, we aimed to explore clinicians’ approach to management with a particular focus on the role of specific interventions that will inform the design of future clinical trials.

Aims

This study assesses patient barriers to successful telemedicine care in orthopaedic practices in a large academic practice in the COVID-19 era.

Aims. We introduced a self-care pathway for minimally displaced distal radius fractures, which involved the patient being discharged from a Virtual Fracture Clinic (VFC) without a physical review and being provided with written instructions on how to remove their own cast or splint at home, plus advice on exercises and return to function. Methods. All patients managed via this protocol between March and October 2020 were contacted by a medical secretary at a minimum of six months post-injury. The patients were asked to complete the Patient-Rated Wrist Evaluation (PRWE), a satisfaction questionnaire, advise if they had required surgery and/or contacted any health professional, and were also asked for any recommendations on how to improve the service. A review with a hand surgeon was organized if required, and a cost analysis was also conducted. Results. Overall 71/101 patients completed the telephone consultation; no patients required surgery, and the mean and median PRWE scores were 23.9/100 (SD 24.9) and 17.0/100 (interquartile range (IQR) 0 to 40), respectively. Mean patient satisfaction with treatment was 34.3/40 (SD 9.2), and 65 patients (92%) were satisfied or highly satisfied. In total there were 16 contact calls, 12 requests for a consultant review, no formal complaints, and 15 minor adjustment suggestions to improve patient experience. A relationship was found between intra-articular injuries and lower patient satisfaction scores (p = 0.025), however no relationship was found between PRWE scores and the nature of the fracture. Also, no relationship was found between the type of immobilization and the functional outcome or patient satisfaction. Cost analysis of the self-care pathway V traditional pathway showed a cost savings of over £13,500 per year with the new self-care model compared to the traditional model. Conclusion. Our study supports a VFC self-care pathway for patients with minimally displaced distal radius fractures. The pathway provides a good level of patient satisfaction and function. To improve the service, we will make minor amendments to our patient information sheet. Cite this article: Bone Jt Open 2022;3(9):726–732

This study describes the introduction of a virtual pathway for the management of suspected scaphoid fractures and reports patient-reported outcome measures (PROMs) and satisfaction following treatment with this service. All adult patients that presented with a clinically suspected scaphoid fracture that was not visible on presentation radiographs over a one-year period were eligible for inclusion in the pathway. Demographics, examination findings, clinical scaphoid score (CSS) and standard four view radiographs were collected at presentation. All radiographs were reviewed virtually by a single consultant hand surgeon, with patient-initiated follow-up on request. PROMs were assessed at a minimum of one year post presentation and included the QuickDASH, EQ-5D-5L, the Net Promoter Score (NPS) and return to work. There were 221 patients referred to the virtual pathway. The mean age was 41 (range 16–87; SD 18.4 years) and there were 99 men (45%). There were 189 (86%) patients discharged with advice and 19 (9%) patients were recalled for clinical review (seven undisplaced scaphoid fractures, six other acute fractures of the hand or wrist, two scapholunate ligament injuries, and four cases where no abnormality was detected). Thirteen patients (6%) initiated follow-up with the hand service; no fracture or ligament injury was identified within this group. PROMs were available for 179 (81%) patients at a mean of 19 months follow-up (range: 13 – 33 months). The median QuickDASH score was 2.3 (IQR, 0–15.9), the median EQ-5D-5L was 0.85 (IQR, 0.73–1.00), the NPS was 76, and 173 (97%) patients were satisfied with their treatment. There were no documented cases of symptomatic non-union one year following injury. This study reports the introduction of a virtual pathway for suspected scaphoid fractures, demonstrating high levels of patient satisfaction, excellent PROMs, and no detrimental effects in the vast majority of cases

Introduction and Objective. Zone 2 flexor tendon injuries are still one of the challenges for hand surgeons. It is not always possible to achieve perfect results in hand functions after these injuries. There is no consensus in the literature regarding the treatment of zone 2 flexor tendon injuries, tendon repair and surgical technique to be applied to the A2 pulley. The narrow fibro-osseous canal structure in zone 2 can cause adhesions and loss of motion due to the increase in tendon volume due to surgical repair. Different surgical techniques have been defined to prevent this situation. In our study, in the treatment of zone 2 flexor tendon injuries; Among the surgical techniques to be performed in addition to FDP tendon repair; We aimed to compare the biomechanical results of single FDS slip repair, A2 pulley release and two different pulley plasty methods (Kapandji and V-Y pulley plasty). Materials and Methods. In our study, 12 human upper extremity cadavers preserved with modified Larssen solution (MLS) and amputated at the mid ½ level of the arm were used. A total of 36 fingers (second, third and the fourth fingers were used for each cadaver) were divided into four groups and 9 fingers were used for each group. With the finger fully flexed, the FDS and FDP tendons were cut right in the middle of the A2 pulley and repaired with the cruciate four-strand technique. The surgical techniques described above were applied to the groups. Photographs of fingers with different loads (50 – 700 gr) were taken before and after the application. Proximal interphalangeal (PIP) joint angle, PIP joint maximum flexion angle and bowstring distance were measured. The gliding coefficient was calculated by applying the PIP joint angle to the single-phase exponential association equation. Results. Gliding coefficient after repair increased by %21.46 ± 44.41, %62.71 ± 116.9, %26.8 ± 35.35 and %20.39 ± 28.78 in single FDS slip repair, A2 pulley release, V-Y pulley plasty and Kapandji plasty respectively. The gliding coefficient increased significantly in all groups after surgical applications (p<0.05). PIP joint maximum flexion angle decreased by %3.17 ± 7.92, %12.82 ± 10.94, %8.33 ± 3.29 and %7.35 ± 5.02 in single FDS slip repair, A2 pulley release, V-Y pulley plasty and Kapandji plasty respectively. PIP joint maximum flexion angle decreased significantly after surgery in all groups (p<0.05). However, there was no statistically significant difference between surgical techniques for gliding coefficient and PIP joint maximum flexion angle. Bowstring distance between single FDS slip repair, kapandji pulley plasty and V-Y pulley plasty showed no significant difference in most loads (p>0.05). Bowstring distance was significantly increased in the A2 pulley release group compared to the other three groups (p<0.05). Conclusion. Digital motion was negatively affected after flexor tendon repair. Similar results were found in terms of gliding coefficient and maximum flexion angle among different surgical methods. As single FDS slipe repair preserves the anatomical structure of the A2 pulley therefore we prefer it as an ideal method for zone 2 flexor tendon repair. However, resection of FDS slip may jeopardizes nutrition to the flexor digitorum profundus tendon which weakens the repair site. Therefore the results must be confirmed by an in vivo study before a clinical recommendation can be made. Keywords: Flexor tendon; injury; pulley plasty; cadaver;

Initially, all surgeons in Australia were generalists and those with an interest in the anatomy of the hand performed hand surgery. Early hand surgeons, such as Benjamin Rank, excelled and Rank and Wakefield's Textbook of Hand Surgery was widely used throughout the world. Eventually, groups of like-minded surgeons formed the Australian Hand Club in 1972, which subsequently became formalised as The Australian Hand Surgery Society (AHSS), in 2001. A very high standard of hand surgery has been achieved in Australia, with most hand surgeons having trained in either plastic surgery or orthopaedic surgery, and then further trained in Fellowships in Europe or North America. Bernard O'Brien and John Hueston achieved international recognition in the field of microsurgery and Dupuytren's surgery. Wayne Morrison has been responsible for pioneering work in toe–to–hand transfer and basic research. Tim Herbert changed the way fractures of the scaphoid are managed throughout the world. In 2007 the AHSS commenced a Travelling Fellowship Programme to facilitate an increased involvement in Australia in academic hand surgery and to foster contacts between hand surgeons of the future. At the present time, the AHSS is concentrating on education and training in order to raise the overall standard of management of hand surgery, particularly in relation to after hours' trauma. This is particularly necessary in rural and regional areas where hand surgery has traditionally been treated by occasional practitioners. There is a risk that hand surgery falls between the two stools of plastic surgery and orthopaedic surgery and the AHSS wishes to further formalise training and education within the Royal Australasian College of Surgeons (RACS) as a single training stream in the future. There are potential threats both within and without, with safe working hours a particular threat in relation to reducing both the quantity and quality of training. The future will almost certainly involve greater emphasis on biomaterials and prosthetic compounds, but trying to ensure a uniformly high standard of hand surgery management throughout the country will remain as a primary focus

Distal radius fractures are the most common upper extremity injury, and are increasingly being treated surgically with pre-contoured volar-locking plates. These plates are favored for their low-profile template while allowing for rigid anatomic fixation of distal radius fractures. The geometry of the distal radius is extremely complex, and little evidence within the medical literature suggests that current implant designs are anatomically accurate. The main objective of this study is to determine if anatomic alignment of the distal radii corresponds accurately with modern volar-locking plate designs. Additionally, this study will examine sex-linked differences in morphology of the distal radius. Segmented CT models of ten female cadaver (mean age, 88.7 ± 4.57 years, range, 82 – 97) arms, and ten male cadaver (mean age, 86 ± 3.59 years, range, 81 – 91) arms were created. Micro CT models were obtained for the DePuy Synthes 2.4mm Extra-articular (EA) Volar Distal Radius Plate (4-hole and 5-hole head), and 2.4mm LCP Volar Column (VC) Distal Radius Plate (8-hole and 9-hole head). Plates were placed onto the distal radii models in a 3D visualization software by a fellowship-trained orthopaedic hand surgeon. The percent contact, volar cortical angle (VCA), border and overlap of the watershed line (WSL) were measured. Both sexes showed an increase in the average VCA measure from medial to lateral columns which was statistically significant. Female VCA ranged from 28 – 36 degrees, and 38 – 45 degrees for males. WSL overlap ranged from 0 – 34.7629% for all specimens without any statistical significance. The average border distance for females was 2.58571 mm, compared to 3.52411 mm for males, with EA plates having a larger border than VC plates. The border distances had statistically significant differences between the plate types, and was approaching significance between sexes. Lastly, a maximum percent contact of 21.966 % was observed in specimen F4 at a 0.3 mm threshold. No statistical significance between plate or sex populations was observed. This study investigated the incoherency between the volar cortical angle of the distal radius, and the pre-contoured angle of volar locking plates. It was hypothesized that if the VCA measures between plate and bone were unequal then there would be an increase in watershed line overlap, and decrease in percent contact between the surfaces. Our results agreed with literature, indicating that the VCA of bone was larger than that of the EA and VC pre-contoured plates examined in this study. With distal radius fracture incidences and prevalence on the rise for elderly female patients, it is a necessity that volar locking plates be re-designed to factor in anatomical features of individual patients with a particular focus on sex differences. New designs should focus on providing smaller head sizes that are more accurately tailored to the natural contours of the volar distal radius. It is recommended that future studies incorporate expertise from multiple surgeons to diversify and further understand plate placement strategies

Distal radius fractures are the most common upper extremity fracture. The incidence is significantly higher in elderly females with osteoporotic bone. When surgery is indicated, volar locking plates (VLPs) allow for rigid fixation particularly in comminuted fractures with poor bone quality. Although numerous studies have shown the importance of plate placement to avoid soft tissue complications associated with volar plate fixation, there has been little evidence on the anatomic fit of current VLPs. Moreover, the effect of gender differences in distal radius morphology on anatomic fitting of VLPs has not been studied. The aim of this study was to evaluate the gender difference in distal radius morphology and the accuracy of the fit of a current VLP to CT-based distal radius models. Segmented CT models of ten female (mean age, 89 ± 5 years), and ten male (mean age, 86 ± 4 years) cadaveric wrists were obtained. Micro-CT models of the DePuy-Synthes 4-hole extra-articular (EA) and 8-hole volar column (VC) distal radius VLPs were created. A 3D visualization software was used to simulate appropriate plate placement on to the distal radius models by a fellowship-trained hand surgeon. Volar cortical angles (VCA) of the medial, middle and lateral portion of the distal radius were measured and compared between genders. The accuracy of the fit of the two VLP designs were quantified using the percentage of the watershed line (WSL) overlapped by the plate (WSL overlap), the distance between the WSL and the most distal aspect of the posterior plate (prominence distance) and the percentage of contact between the plate and bone. There were statistically significant gender differences in medial, middle and lateral VCAs (p=.003 medial, p=.0001 middle, p=.002 lateral). VCA ranged from 28° to 36° in females and from 38° to 45° in males. The WSL overlap did not show statistically significant gender differences (male: 5.9%, female: 13.6%, p=.174). However, the difference in prominence distance between different genders approached statistical significance (male: 3.5mm, female: 2.6mm, p=.087). Contact mapping between the plate and bone did not demonstrate a perfect contact in any of our specimens. Thus, contact measurements were categorized into 0.1mm, 0.2mm, and 0.3mm threshold contacts. There were no statistically significant gender differences in any of the threshold categories (0.1mm: p=.84, 0.2mm: p=.97, 0.3mm: p=.99). Our results confirm that there are gender differences in distal radius morphology. Current plate designs incorporate a VCA of 25° which does not match the native VCA of the distal radius in males or females. Although the difference in prominence distance approached statistical significance, there were no statistically significant gender differences in the WSL overlap or the contact threshold values. This lack of statistical significance may be related to the small sample size. This study proposes novel methods of assessing the anatomic fit of current VLPs in a 3D CT-based model that may be used in future studies with a larger sample size. Moreover, this study demonstrated the importance of considering gender differences in distal radius morphology in the design of future generations of implants

Practice variation may occur when there is no standardised approach to specific clinical problems and there is a lack of scientific evidence for alternative treatments. Practice variation suggests that a segment of the patient population may be managed sub-optimally, and indicates a need for further research in order to establish stronger evidence-based practice guidelines. We surveyed Australian orthopaedic surgeons to examine practice variation in common orthopaedic presentations. In February 2009, members of the Australian Orthopaedic Association were emailed an online survey, which collected information regarding experience level (number of years as a consultant), sub-specialty interests, state where the surgeon works, on- call participation, as well as five common (anecdotally controversial) orthopaedic trauma cases with a number of management options. Surgeons were asked to choose their one most likely management choice from the list provided, which was either surgical or non-surgical in nature. A reminder was sent two weeks later. Exploratory regression was modeled to examine the predictors of choosing surgical management for each case and overall. Of 760 surgeons, 358 (47%) provided responses. For undisplaced scaphoid fractures, respondents selected short-arm cast (53%), ORIF (22%), percutaneous screw (22%) and long-arm cast (3%). Less experienced (0 to 5 years) (p=0.006) and hand surgeons (p=0.008) were more likely to operate. For a displaced mid-shaft clavicle fracture, respondents selected non-operative (62%), plating (31%) and intramedullary fixation (7%). Shoulder surgeons were more likely to operate (p<0.001). For an undisplaced Weber B lateral malleolus fracture, respondents selected plaster cast or boot (59%), lateral plating (31%), posterior plating (9%) and no splinting (2%). For a displaced Colles fracture in an older patient, respondents selected plating (47%), Kirschner wires (28%), cast/splint (23%) and external fixation (1%). Less experienced (p<0.001) and hand surgeons (p=0.024) were more likely to operate. For a two-part neck of humerus fracture in an older patient, respondents selected non-operative (74%), locking plate (14%), and hemiarthroplasty (7%). Shoulder surgeons were more likely to operate (p<0.001). Accounting for all answers in multiple regression modeling, it was found that more experienced surgeons (>15 years) were 25% less likely to operate (p=0.001). Overall, there was no difference among sub-specialties, or whether a surgeon participated in an on-call roster. Considerable practice variation exists among orthopaedic surgeons in the approach to common orthopaedic problems. Surgeons who identify with a sub-specialty are more likely to manage conditions in their area of interest operatively, and more experienced surgeons are less likely to recommend surgical management

Aims

Occult (clinical) injuries represent 15% of all scaphoid fractures, posing significant challenges to the clinician. MRI has been suggested as the gold standard for diagnosis, but remains expensive, time-consuming, and is in high demand. Conventional management with immobilization and serial radiography typically results in multiple follow-up attendances to clinic, radiation exposure, and delays return to work. Suboptimal management can result in significant disability and, frequently, litigation.

Conventional teaching advises against using adrenaline with local anaesthetic near end-arteries due to risks of irreversible vasospasm, however there are benefits of adjunctive adrenaline including enhanced anaesthetic effect, prolonged duration and temporary haemostasis. Retrospective analysis was undertaken for all elective finger and distal palmar surgery using digital nerve or field blocks performed by four orthopaedic hand surgeons, during a two-year period in a large teaching hospital. Data collected from theatre databases and clinical notes included procedure type, anaesthetic agent, adrenaline use, tourniquet use and evidence of post-operative digital ischaemia or wound complications. 230 procedures (mean age 59 years) were performed, including 158 cases with plain anaesthetic only (2%, 1% Lidocaine or 0.25% Bupivicaine in 150, 4 and 4 cases respectively) and 72 cases with 0.25% Bupivicaine and adrenaline (1:200,000.) Mean anaesthetic volume was 7.5ml (7.2ml vs 8.0ml without and with adrenaline respectively.) Tourniquet was used in all cases without adrenaline but was not used in 21 (29%) of cases with adrenaline. Mean tourniquet time in each group was 16 minutes. Two post-operative infections occurred in the group without adrenaline with none in the adrenaline group and there were no cases of digital necrosis in either group. In the elective setting, adjunctive adrenaline with local anaesthetic does not increase the risk of post-operative infections or digital ischaemia. For proximal finger surgery, where digital tourniquets are often restrictive, using adrenaline can prevent the need for painful arm tourniquets

Aims

The paediatric trigger thumb is a distinct clinical entity with unique anatomical abnormalities. The aim of this study was to present the long-term outcomes of A1 pulley release in idiopathic paediatric trigger thumbs based on established patient-reported outcome measures.

Background. Patients with hand injuries frequently present to Emergency Departments. The ability of junior doctors to perform an accurate clinical assessment is crucial in initiating appropriate management. Objectives. To assess the adequacy of junior doctor hand examination skills and to establish whether further training and education is required. Methods. A double-centre study was conducted using an anonymous survey assessing hand examination completed by junior doctors (Foundation year 1 and Senior House Officer grades) working in Trauma & Orthopaedics or Emergency Departments. The survey covered all aspects of hand examination including assessment of: Flexor and Extensor tendons, Nerves (motor and sensory) and Vascular status. Surveys were marked against answers pre-agreed with a Consultant hand surgeon. Results. 32 doctors completed the survey. Tendons: 59% could accurately examine extensor digitorum, 41% extensor pollicis longus, 38% flexor digitorum profundus and 28% flexor digitorum superficialis. Nerves – Motor: 53% could accurately examine the radial nerve, 37% the ulnar nerve, 22% the median nerve and 9% the anterior interosseous nerve. Nerves – Sensory: 88% could accurately examine the radial nerve, 81% the ulnar nerve, 84% the median nerve and 18.8% digital nerves. Vascular: 93% could describe 3 methods of assessing vascularity. Conclusions. Tendon and neurological aspects of hand clinical examination were poorly executed at junior doctor level in this pragmatic survey. This highlights the need for targeted education and training to improve the accuracy of junior doctor hand injury assessment and subsequent improving patient treatment and safety. Recommendations include dedicated hand examination teaching early in Orthopaedic/A&E placements and introduction of an illustrated Hand Trauma Examination Proforma. Level of evidence. III - Evidence from case, correlation, and comparative studies

Aims

The surgical helmet system (SHS) was developed to reduce the risk of periprosthetic joint infection (PJI), but the evidence is contradictory, with some studies suggesting an increased risk of PJI due to potential leakage through the glove-gown interface (GGI) caused by its positive pressure. We assumed that SHS and glove exchange had an impact on the leakage via GGI.

Aims

The primary aim of this study was to describe long-term patient-reported outcomes after ulna shortening osteotomy for ulna impaction syndrome.

Aims

Low-energy distal radius fractures (DRFs) are the most common upper arm fractures correlated with bone fragility. Vitamin D deficiency is an important risk factor associated with DRFs. However, the relationship between DRF severity and vitamin D deficiency is not elucidated. Therefore, this study aimed to identify the correlation between DRF severity and serum 25-hydroxyvitamin-D level, which is an indicator of vitamin D deficiency.

Introduction. Carpal tunnel syndrome is the commonest peripheral nerve compression neuropathy. Carpal tunnel release (CTR) is a very successful operation. Failed CTR mainly presents as persistence of symptoms, recurrence and new symptoms. The commonest presentation is persistence of symptoms suggested to be due to inadequate release of transverse carpal ligament (TCL) [3], and ante brachial fascia (ABF) [2]. Aim. We were looking at the rate of recurrence after CTR and the levels of skills of the primary surgeon. Materials and method. In a retrospective study we reviewed 49 cases of failed CTR in Kent and Sussex area in the South East of England covering the period between 1978 and 2008. The data was generated from the revision open CTR operation notes following referral to the specialist hand surgeon in the region. Results. There is 34 female and 13 male with age range of 41 to 90. The time between primary CTR to revision CTR is 3 months to 30 years. In our series, more than 55% was due to persistence. Incomplete division of TCL was noted in over 55% of cases and intact ABF in 34% of cases. In 49% of cases of recurrent carpal tunnel syndrome post CTR the primary surgery was done by GPs. Conclusion. This questions the role of GPs with special interest (GPSI) and surgical care practitioners as surgeons. Is this “a tip of the iceberg” This initiative is target driven not patient centred