Aims. Periprosthetic fractures (PPFs) following hip arthroplasty are complex injuries. This study evaluates patient demographic characteristics, management, outcomes, and risk factors associated with PPF subtypes over a decade. Methods. Using a multicentre collaborative study design, independent of registry data, we identified adults from 29 centres with PPFs around the hip between January 2010 and December 2019. Radiographs were assessed for the Unified Classification System (UCS) grade. Patient and injury characteristics, management, and outcomes were compared between UCS grades. A multinomial logistic regression was performed to estimate relative risk ratios (RRR) of variables on UCS grade

Aims. United Classification System (UCS) B2 and B3 periprosthetic fractures in total hip arthroplasties (THAs) have been commonly managed with modular tapered stems. No study has evaluated the use of monoblock fluted tapered titanium stems for this indication. This study aimed to evaluate the effects of a monoblock stems on implant survivorship, postoperative outcomes, radiological outcomes, and osseointegration following treatment of THA UCS B2 and B3 periprosthetic fractures. Methods. A retrospective review was conducted of all patients who underwent revision THA (rTHA) for periprosthetic UCS B2 and B3 periprosthetic fracture who received a single design monoblock fluted tapered titanium stem at two large, tertiary care, academic hospitals. A total of 72 patients met inclusion and exclusion criteria (68 UCS B2, and four UCS B3 fractures). Primary outcomes of interest were radiological stem subsidence (> 5 mm), radiological osseointegration, and fracture union. Sub-analysis was also done for 46 patients with minimum one-year follow-up. Results. For the total cohort, stem osseointegration, fracture union, and stem subsidence were 98.6%, 98.6%, and 6.9%, respectively, at latest follow-up (mean follow-up 27.0 months (SD 22.4)). For patients with minimum one-year of follow-up, stem osseointegration, fracture union, and stem subsidence were 97.8%, 97.8%, and 6.5%, respectively. Conclusion. Monoblock fluted stems can be an acceptable modality for the management of UCS B2 periprosthetic fractures in rTHAs due to high rates of stem osseointegration and survival, and the low rates of stem subsidence, and revision. Further research on the use of this stem for UCS B3 periprosthetic fractures is warranted to determine if the same conclusion can be made for this fracture pattern. Cite this article: Bone Jt Open 2023;4(8):551–558

Aims. This study evaluates risk factors influencing fracture characteristics for postoperative periprosthetic femoral fractures (PFFs) around cemented stems in total hip arthroplasty. Methods. Data were collected for PFF patients admitted to eight UK centres between 25 May 2006 and 1 March 2020. Radiographs were assessed for Unified Classification System (UCS) grade and AO/OTA type. Statistical comparisons investigated relationships by age, gender, and stem fixation philosophy (polished taper-slip (PTS) vs composite beam (CB)). The effect of multiple variables was estimated using multinomial logistic regression to estimate odds ratios (ORs) with 95% confidence intervals (CIs). Surgical treatment (revision vs fixation) was compared by UCS grade and AO/OTA type. Results. A total of 584 cases were included. Median age was 79.1 years (interquartile range 72.0 to 86.0), 312 (53.6%) patients were female, and 495 (85.1%) stems were PTS. The commonest UCS grade was type B1 (278, 47.6%). The most common AO/OTA type was spiral (352, 60.3%). Metaphyseal split fractures occurred only with PTS stems with an incidence of 10.1%. Male sex was associated with a five-fold reduction in odds of a type C fracture (OR 0.22 (95% CI 0.12 to 0.41); p < 0.001) compared to a type B fracture. CB stems were associated with significantly increased odds of transverse fracture (OR 9.51 (95% CI 3.72 to 24.34); p < 0.001) and wedge fracture (OR 3.72 (95% CI 1.16 to 11.95); p = 0.027) compared to PTS stems. Both UCS grade and AO/OTA type differed significantly (p < 0.001 and p = 0.001, respectively) between the revision and fixation groups but a similar proportion of B1 fractures underwent revision compared to fixation (45.3% vs 50.6%). Conclusion. The commonest fracture types are B1 and spiral fractures. PTS stems are exclusively associated with metaphyseal split fractures, but their incidence is low. Males have lower odds of UCS grade C fractures compared to females. CB stems have higher odds of bending type fractures (transverse and wedge) compared to PTS stems. There is considerable variation in practice when treating B1 fractures around cemented stems. Cite this article: Bone Jt Open 2021;2(7):466–475

Introduction. Distal femur fracture fixation in elderly presents significant challenges due to osteoporosis and associated comorbidities. There has been an evolution in the management of these fractures with a description of various surgical techniques and fixation methods; however, currently, there is no consensus on the standard of care. Non-union rates of up to 19% and mortality rates of up to 26 % at one year have been reported in the literature. Delay in surgery and delay in mobilisation post-operatively have been identified as two main factors for high rate of mortality. As biomechanical studies have proved better stability with dual plating or nail-plate combination, a trend has been shifting for past few years towards rigid fixation to allow early mobilisation. Our study aims to compare outcomes of distal femur fractures managed with either single plate (SP), dual plating (DP) or nail-plate construct (NP). Methods. A retrospective review of patients aged above 65 years with distal femur fractures (both native and peri-prosthetic) who underwent surgical management between June 2020 and May 2023 was conducted. Patients were divided into three groups based on mode of fixation - single plate or dual plating or nail-plate construct. AO/OTA classification was used for non-periprosthetic, and Unified classification system (UCS) was used for periprosthetic fractures. Data on patient demographics, fracture characteristics, surgical details, postoperative complications, re-operation rate, radiological outcomes and mortality rate were evaluated. Primary objective was to compare re-operation rate and mortality rate between 3 groups at 30 days, 6 months and at 1 year. Results. A cohort of 32 patients with distal femur fractures were included in this study. 91% were females and mean age was 80.97 (range 68–97). 18 (53%) were non-periprosthetic fracture and 14 (47%) were periprosthetic fractures.18 patients underwent single plate fixation (AO/OTA 33A – 8, 33B/C – 2, UCS V3B – 5, V3C – 3),10 patients had dual plate fixation (AO/OTA 33A – 1, 33B/C – 4, UCS V3B – 3, V3C – 2) and 4 patients underwent nail-plate combination fixation (AO/OTA 33A – 4). 70.5% patients had surgery within 36 hours of admission and 90% within 48 hours. Analysis showed no re-operation at 30 days, 6 months in all 3 groups. At 1 year one patient had re-operation in dual-plating periprosthetic group (Distal femur replacement done for failed fixation). Three patients (16%) in single plate group had re-operation at 2 years (2 for peri-implant fracture and 1 for infection). None of the patients treated with Nail-plate combination had re-operation. Mortality rate at 30 days was 0% in among all the 3 groups. At 6 months, it was 16% in single plate group and 0% in DP and NP groups at 6 months and at 1 year mortality rate was 27% in SP group, 10% in DP and 0% in NP group. Combined mortality rate was 0% at 30 days, 9% at 6 months and 18.7% at one year. Conclusion. Our analysis provides insights into fixation methods of distal femur fractures in elderly patients. We conclude that a lower re-operation rate and mortality rate can be achieved with early surgery and rigid fixation with either dual plating or nail-plate construct to allow early mobilisation. Further prospective studies are warranted to confirm these findings and guide the selection of optimal surgical strategies for these challenging fractures

Cemented total hip replacement (THR) provides excellent outcomes and is cost-effective. Polished taper-slip (PTS) stems demonstrate successful results and have overtaken traditional composite-beam (CB) stems. Recent reports indicate they are associated with a higher risk of postoperative periprosthetic femoral fracture (PFF) compared to CB stems. This study evaluates risk factors influencing fracture characteristics around PTS and CB cemented stems. Data were collected for 584 PFF patients admitted to eight UK centres from 25/05/2006-01/03/2020. Radiographs were assessed for Unified Classification System (UCS) grade and Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) type. Statistical comparisons investigated relationships by age, gender, and stem fixation philosophy (PTS versus CB). The effect of multiple variables was estimated using multinomial logistic regression to estimate odds ratios (OR) with 95% confidence intervals (CI). Median (IQR) age was 79.1 (72.0–86.0) years, 312 (53.6%) patients were female, and 495 (85.1%) stems were PTS. The commonest UCS grade was type B1 (278, 47.6%). The commonest AO/OTA type was spiral (352, 60.3%). Metaphyseal-split fractures occurred only with PTS stems with an incidence of 10.1%. Male gender was associated with a five-fold reduction in odds of a type C fracture (OR 0.22, 95% CI 0.12 to 0.41, p<0.001) compared to a type B fracture. CB stems were associated with significantly increased odds of transverse fracture (OR 9.51, 95% CI 3.72 to 24.34, p <0.001) and wedge fracture (OR 3.72, 95% CI 1.16 to 11.95, p <0.05) compared to PTS stems. This is the largest study investigating PFF characteristics around cemented stems. The commonest fracture types are B1 and spiral fractures. PTS stems are exclusively associated with metaphyseal-split fractures, but their incidence is low. Males have lower odds of UCS grade C fractures compared to females. CB stems had higher odds of bending type fractures (transverse and wedge) compared to PTS stems. Biomechanical testing is needed for validation and investigation of modifiable factors which may reduce the risk of unstable fracture patterns requiring complex revision surgery over internal fixation

A large number of classification systems exist to assist in the evaluation and treatment of periprosthetic fractures following joint replacement. They vary in the language or categorisation they employ, the joints to which they are differently applied, the factors they assess, and the hierarchy or importance assigned to those factors. Not all incorporate the three most important variables which should govern treatment (fracture location, implant fixation, bone quality), nor the factors which have been demonstrated to most prominently influence outcomes. To a greater or lesser extent they attempt to include the principles of the Vancouver Classification System, and yet they differ in ways that lead to awkwardness in their application within the clinical setting. As an example, for fractures of the patella alone, three different systems have been proposed. As the result of an international effort endorsed by the AO/OTA, the Universal Classification System, or UCS, has been developed. It incorporates the most important factors that should influence evaluation, treatment, and outcomes evaluation. It applies the system to the musculoskeletal system as a whole, regardless of the joint involved or the bone that is broken. And it uses a single common language to describe the injury and prescribe the logical principles of treatment. It is hoped the UCS will appeal to our colleagues worldwide and will assist all of us in the care of our patients who suffer a periprosthetic fracture after joint replacement; be that the hip, knee, ankle, shoulder, elbow or wrist. The UCS can be applied with equal ease and merit to all

Post-operative periprosthetic fracture of the femur (POPFF) is a growing problem associated with increased mortality. Most registry derived estimates of mortality only record patients who undergo revision and cohort studies are generally limited to a single center, which makes comparison for the purposes of service improvement difficult. The aim of this study is to perform a systematic review and meta-analysis of cohort studies reporting mortality following POPFF in the last decade. Study methodology was peer-reviewed (PROSPERO: CRD42020170819). Literature search was conducted using Medline and EMBASE. Primary exposure was the diagnosis of POPFF, and the primary outcome measure was all-cause mortality: whilst an inpatient, within 30-days, within 90-days and within one year of POPFF. Proportion of patients dying (95% CI [confidence interval]) was estimated using metaregression. Results were compared to mortality following neck of femur fracture (NOF) from international NOF registry data. 4841 patients from 35 cohort studies were included. Study quality was generally low with a majority limited to a single centre. Weighted mean follow-up was 2.3 years and the most common POPFF was UCS B. Pooled proportion dying as an inpatient was 2.4% (95% CI 1.6% to 3.4%). Pooled proportion dying within 30 days was 3.3% (95% CI 2.0% to 5.0%). Pooled proportion dying within 90 days was 4.8% (95% CI 3.6% to 6.1%). Pooled proportion dying within one year was 13.4% (95% CI 11.9% to 14.8%). Mortality following POPFF was similar to that of NOF up to 30 days, but better at one year. 3.3% of patients die following POPFF within 30 days of injury. Mortality is similar to that experienced by patients following NOF up to 30 days, but better at one year, which may represent the lower underlying risk of death in the POPFF cohort. These results may form the basis for evaluation of services treating POPFF in the future

Lowest instrumented vertebra (LIV) selection is critical to preventing complications following posterior spinal arthrodesis (PSA) for thoracolumbar/lumbar adolescent idiopathic scoliosis (TL/L AIS), but evidence guiding LIV selection is limited. This study aimed to investigate the efficacy of PSA using novel unilateral convex segmental pedicle screw instrumentation (UCS) in correcting TL/L AIS, to identify radiographic parameters correlating with distal extension of PSA, and to develop a predictive equation for distal fusion extension using these parameters. We reviewed data (demographic, clinical, radiographic, and SRS-22 questionnaires) preoperatively to 2-years' follow-up for TL/L AIS patients treated by PSA using UCS between 2006 to 2011. 53 patients were included and divided into 2 groups: Group-1 (n=36) patients had PSA between Cobb-to-Cobb levels; Group-2 (n=17) patients required distal fusion extension. A mean curve correction of 80% was achieved. Mean postoperative LIV angle, TL/L apical vertebra translation (AVT), and trunk shift were lower than previous studies. Six preoperative radiographic parameters significantly differed between groups and correlated with distal fusion extension: thoracic curve size, thoracolumbar curve size, LIVA, AVT, lumbar flexibility index, and Cobb angle on lumbar convex bending. Regression analysis optimised an equation (incorporating the first five parameters) which is 81% accurate in predicting Cobb-to-Cobb fusion or distal extension. SRS-22 scores were similar between groups. We conclude that TL/L AIS is effectively treated by PSA using UCS, six radiographic parameters correlate with distal fusion extension, and a predictive equation incorporating these parameters reliably informs LIV selection and the need for fusion extension beyond the caudal Cobb level

Aims

The burden of revision total hip arthroplasty (rTHA) continues to grow. The surgery is complex and associated with significant costs. Regional rTHA networks have been proposed to improve outcomes and to reduce re-revisions, and therefore costs. The aim of this study was to accurately quantify the cost and reimbursement for a rTHA service, and to assess the financial impact of case complexity at a tertiary referral centre within the NHS.

Aims

The aim of this modified Delphi process was to create a structured Revision Hip Complexity Classification (RHCC) which can be used as a tool to help direct multidisciplinary team (MDT) discussions of complex cases in local or regional revision networks.

Aims

The aims of this study were to evaluate the incidence of reoperation (all cause and specifically for periprosthetic femoral fracture (PFF)) and mortality, and associated risk factors, following a hemiarthroplasty incorporating a cemented collarless polished taper slip stem (PTS) for management of an intracapsular hip fracture.

The objective of this study was to compare the results of two consecutive series of patients with either intra-medullary uncemented stems (UCS) distal femoral endoprosthetic replacement or the Compress. ®. (CMP) distal femoral implant. Patients were divided into two groups: those who received UCS prosthesis (Group-1: 54 patients) and those who received CMP prosthesis (Group-2: 42 patients).The most frequent diagnosis was osteosarcoma. Age and gender were similar both groups. In Group-1, at a mean follow-up of 144 months, 37 prostheses were still in place. The overall Kaplan-Meier prosthetic survival rates were 79% at five and 62 % at ten years. Most of failures were long term complications. Aseptic loosening was the primary cause of late prosthetic failure. On Cox regression analysis, prosthetic stem diameter under 13mm was a significant negative prognostic factor for prosthetic survival (p=0.016). In Group-2, at a mean follow-up of 84 months, 36 prostheses were still in place. The overall rate of CMP prosthesis survival was 86% at 5 years. All complications were during the first postoperative year, being femoral fracture the main revision cause. The patients who retained the prosthesis had mainly good or excellent MSTS functional results in both groups

The use of porous ceramics as bone graft substitutes (BGS) has been under consideration for over 30 years [. 1. ]. In particular calcium phosphates such as hydroxyapatite (HA) have been promoted as a result of their osteoconductive properties, i.e. that they stimulate bone apposition within their macroporous structures. It is well established that both pore size [. 1. ] and pore connectivity [. 2. ] are critical morphological elements for a successful BGS. Thus biologically ‘optimal’ structures, with relatively large levels of porosity (> 70%) are consequently low in mechanical strength, with typical UCS values of between 1–8 MPa depending on the precise level of porosity and the pore size distribution. The aim of this investigation was to study the biological response to a porous HA with a relatively low level of macro-porosity (64%), but which possessed a highly interconnected micro-pore structure within the HA struts. Phase pure porous HA implants were manufactured using a novel technique [. 3. ] with a mean macro-pore size of 230 ìm and a mean pore interconnection size of 110 μm. Cylindrical specimens 4.5 mm in diameter were implanted in the distal femur of 6 month New Zealand White rabbits and retrieved for histological and histomorphometric analysis at 4 weeks. The mineral apposition rate (MAR) was determined through the administration of fluorochrome labels at 1, 2 and 3 weeks. After 4 weeks new bone had penetrated deep within the macro-pore structure and at high magnification osteocyte-like cells were observed occupying micro-pores within the ceramic struts. Furthermore, there was a significant increase in the MAR of bone formed within and surrounding the PHA (5.21 ìm.day-1, 4.42 ìm.day-1) as compared to the normal turnover rate of control bone (2.07 ìm.day-1, 2.09 ìm.day-1) during weeks 1-2 and 2–3, respectively. The micro-porous network within the scaffold struts clearly influenced the host response. This could be linked to an associated increase in roughness or surface area, or it may reflect the greater level of strut permeability underlining the importance of nutrient transfer and the promotion of angiogenesis in scaffolds for bone repair