Background and aim. Recent proposals have been introduced to modify stem design and/or femoral fixation in total hip replacement (THR). New designs need to consider previous design features and their results. The aim of this study has been to evaluate the clinical and radiological results of six different designs of tapered uncemented stems implanted in our Institution. Methods. 1918 uncemented hips were prospectively assessed from 1999 to 2011 (minimum follow-up of five years for the unrevised hips). All hips had a 28 or 32 mm femoral head and metal-on-polyethylene or alumina-on-alumina bearing surface. Six uncemented femoral designs that shared a femoral tapered stem incorporating a coating surface were included in the study. The different design features included the type of coating, metaphyseal filling, and sectional shape. Results. Intra-operative proximal femoral crack was 6.7% in one of the designs (p=0.01), univariate analysis showing a lower risk of crack in the other designs. The position of the stem was neutral in 80% of the cases for all designs. Femoral canal filing was related to the stem design (p<0.001 at the three levels) and to the femoral level assessed (subset alpha=0.005). Twelve stems were revised for aseptic loosening (6 from two different designs). The survival rate for femoral aseptic loosening at 15 years was 96.6% (95% CI 93.8 to 99.4) for one of these two designs ad 97.4% (95% CI95.5 to 99.6) for the other. Regression analysis showed that stem design was the only factor related to aseptic loosening when adjusted for femoral canal filling (at the three levels) stem position (neutral or not) and femoral type (cylindrical or not). Conclusion. Tapered uncemented stems consistently provide excellent bone fixation. New designs need to avoid changing successful features and concentrate on the less successful aspects

Background and aim. Recent proposals have been introduced to modify stem design and/or femoral fixation in total hip replacement (THR). New designs need to consider previous design features and their results. The aim of this study has been to evaluate the clinical and radiological results of six different designs of tapered uncemented stems implanted in our Institution. Methods. 1918 uncemented hips were prospectively assessed from 1999 to 2011 (minimum follow-up of five years for the unrevised hips). All hips had a 28 or 32 mm femoral head and metal-on-polyethylene or alumina-on-alumina bearing surface. Six uncemented femoral designs that shared a femoral tapered stem incorporating a coating surface were included in the study. The different design features included the type of coating, metaphyseal filling, and sectional shape. Results. Intra-operative proximal femoral crack was 6.7% in one of the designs (p=0.01), univariate analysis showing a lower risk of crack in the other designs. The position of the stem was neutral in 80% of the cases for all designs. Femoral canal filing was related to the stem design (p<0.001 at the three levels) and to the femoral level assessed (subset alpha=0.005). Twelve stems were revised for aseptic loosening (6 from two different designs). The survival rate for femoral aseptic loosening at 15 years was 96.6% (95% CI 93.8 to 99.4) for one of these two designs ad 97.4% (95% CI95.5 to 99.6) for the other. Regression analysis showed that stem design was the only factor related to aseptic loosening when adjusted for femoral canal filling (at the three levels) stem position (neutral or not) and femoral type (cylindrical or not). Conclusion. Tapered uncemented stems consistently provide excellent bone fixation. New designs need to avoid changing successful features and concentrate on the less successful aspects

INTRODUCTION. Combining novel diverse population-based software with a clinically-demonstrated implant design is redefining total hip arthroplasty. This contemporary stem design utilized a large patient database of high-resolution CT bone scans in order to determine the appropriate femoral head centers and neck lengths to assist in the recreation of natural head offset, designed to restore biomechanics. There are limited studies evaluating how radiographic software utilizing reference template bone can reconstruct patient composition in a model. The purpose of this study was to examine whether the application of a modern analytics system utilizing 3D modeling technology in the development of a primary stem was successful in restoring patient biomechanics, specifically with regards to femoral offset (FO) and leg length discrepancy (LLD). METHODS. Two hundred fifty six patients in a non-randomized, post-market multicenter study across 7 sites received a primary cementless fit and fill stem. Full anteroposterior pelvis and Lauenstein cross-table lateral x-rays were collected preoperatively and at 6-weeks postoperative. Radiographic parameters including contralateral and operative FO and LLD were measured. Preoperative and postoperative FO and LLD of the operative hip were compared to the normal, native hip. Clinical outcomes including the Harris Hip Score (HHS), Lower Extremity Activity Scale (LEAS), Short Form 12 (SF12), and EuroQol 5D Score (EQ-5D) were collected preoperatively, 6 weeks postoperatively, and at 1 year. RESULTS. The mean age is 62 years old (range 32 – 75), 136 male and 120 female, BMI 29.7. The preoperative FO and LLD of the operative hip were 43.5 mm (±9.0 mm) and 3.0 mm (±6.5 mm) compared to the native contralateral hip, respectively. The postoperative FO and LLD were 46.4 mm (±8.7 mm) and 1.6 mm (±7.6 mm) compared to the native contralateral hip, respectively. The change in FO on the operative side was 3.0 mm (±7.2 mm) (p<0.0001) and the change in LLD from preoperative to 6-weeks postoperative was 1.6 mm (±8.4 mm) (p=0.0052) (Figure 1), demonstrating the ability of this stem design to recreate normal hip biomechanics in this study. The HHS increased considerably from a preoperative score of 55.9 to 78.4 at 6 weeks and 92.7 at 1 year. Clinically significant improvements were also seen at 1 year in the LEAS (+2.3), SF12 PCS (+16.3), and EQ-5D TTO (+0.26) and the EQ-5D VAS (+15.7). DISCUSSION and CONCLUSION. This study demonstrated that recreation of normal anatomic leg length and offset is possible by utilizing a modern fit and fill stem that was designed by employing an advanced anthropomorphic database of CT scans. We hypothesize that when surgeons utilize this current fit and fill stem design, it will allow them to accurately recreate a patient's natural FO and leg length, assisting in the restoration of patient biomechanics. Summary Sentence. In this study, modern design methods of a press-fit stem using 3D modeling tools recreated natural femoral offset and leg length, assisting in the restoration of patient biomechanics

Introduction. The origins of the uncemented tapered wedge hip stem design currently offered by several orthopaedic device companies can be linked back to the cemented Straight Mueller type stem design first used in 1977. The design, a wedge shape with a taper angle of 6 degrees, maintains a single medial curvature for all sizes and increases laterally in the width to accommodate different size femurs. Although evolutionary improvements have been made over the years the basic body geometry of the stem has stayed mainly unchanged with excellent clinical survivorship. Over the past decade, the demographics of hip replacement have changed, with a large increase in younger male patients in the age range of 40 to 60 years. In this study the femoral fit of a novel tapered stem, designed to fit a wide array of patient types, is compared to a standard predicate tapered stem design. Methods. A bone morphology study was performed on a patient population of 556 patients using three dimensional digital data from CT-scans. To characterize the fit of the stem designs we analyzed the ratio of a distal (60mm below lesser trochanter) and a proximal (10mm above lesser trochanter) cross section. The same measurements were taken with the standard tapered stem design and the novel tapered stem design, with a given constant implantation height of 20mm above the lesser trochanter. The fit of the stems was classified as Type 1, where there was both proximal and distal engagement, Type 2, proximal engagement only, Type 3, distal engagement only. The distal and proximal engagement, Type 1, was specified with a maximum engagement difference of 2mm proximal to distal. Results. The standard tapered stem showed a well balanced distal to proximal ratio in the median sizes. However, with increasing stem size the distal engagement increases. The novel tapered stem design showed a well balanced proximal to distal ratio throughout the complete size range. With respect to Type 3 fit classification the novel tapered stem design showed a reduced percentage of distal engagements (2.8%) compared to the predicate standard stem (17.2%). In the 40 to 60 year old male group the distal engagements for the standard stem increases (28.2%), whereas the distal engagements for the novel stem remains unchanged (1.3%). Discussion. The cementless, tapered wedge stem design is used in large numbers globally due to its ease of use and reproducibility. However, changing patient demographics and associated bone morphology represents a challenge for existing designs to achieve a proximal fit. The novel tapered stem design presented here was adapted to these influencing factors by optimizing the proximal to distal ratio with respect to the whole patient group resulting in a particularly marked improvement in proximal fit in the male 40–60 age group compared to predicate stem designs

Objectives. The use of ceramic femoral heads in total hip arthroplasty (THA) has increased due to their proven low bearing wear characteristics. Ceramic femoral heads are also thought to reduce wear and corrosion at the head-stem junction with titanium (Ti) stems when compared with metal heads. We sought to evaluate taper damage of ceramic compared with metal heads when paired with cobalt chromium (CoCr) alloy stems in a single stem design. Methods. This retrieval study involved 48 total hip arthroplasties (THAs) with CoCr V40 trunnions paired with either CoCr (n = 21) or ceramic (n = 27) heads. The taper junction of all hips was evaluated for fretting/corrosion damage and volumetric material loss using a roundness-measuring machine. We used linear regression analysis to investigate taper damage differences after adjusting for potential confounding variables. Results. We measured median taper material loss rates of 0.210 mm. 3. /year (0.030 to 0.448) for the metal head group and 0.084 mm. 3. /year (0.059 to 0.108) for the ceramic group. The difference was not significant (p = 0.58). Moreover, no significant correlation between material loss and implant or patient factors (p > 0.05) was found. Conclusions. Metal heads did not increase taper damage on CoCr trunnions compared with ceramic heads from the same hip design. The amount of material released at the taper junctions was very low when compared with available data regarding CoCr/Ti coupling in metal-on-metal bearings. Cite this article: A. Di Laura, H. Hothi, J. Henckel, I. Swiatkowska, M. H. L. Liow, Y-M. Kwon, J. A. Skinner, A. J. Hart. Retrieval analysis of metal and ceramic femoral heads on a single CoCr stem design. Bone Joint Res 2017;6:–350. DOI: 10.1302/2046-3758.65.BJR-2016-0325.R1

The main reasons of aseptic loosening of the cemented hip stem are three: Bone cement fracture, bone cement debonding, and rupture of cement/bone interface. These are caused by normal/shear stress in the cement mantle. In past studies, there are introduced some optimum design of the hip prosthesis. But all there are not considered enough design objectives. The purpose of this study is to design the optimum stem geometry, which reduces the many stress in the cement mantle at the same time. We reserched the relationship between stem design and cement mantle stresses for this purpose. The cemented THA proximal femur FEM model was created on CAD and FEM software. Harris Precoat Design was used for stem model. Seven design parameters were defined on this model. Optimization calculation was performed by changing the design parameters. Four objective functions were defined; largest maximum principal stress in the cement mantle, stem/cement interface shear stress, bone/cement interface shear stress, and tensile stress between stem and cement mantle on proximal lateral section. Genetic algorithm was used to change the design parameters. Pareto map was created from results of calculation to reserach the realtionship of each objective functions. From Pareto maps, we can know that Principal stress and Tensile stress are trade-off relation; the geometry decreasing Princpal stress is increasing Tensile stress. However, stem/cement shear and bone/cement shear are similar. Principal stress and shear stress are also similar. Multicriteria design optimization of the hip prosthes is was performed based on the HARRIS Precoat stem. In the results, we got many Pareto solutions and relationship between each objective function. And with general methods of development, analysis of trade-off relationship is very useful method for Hip prosthesis development

Introduction. Resorptive bone remodeling secondary to stress shielding has been a concern associated with cementless total hip arthroplasty (THA). At present, various types of cementless implants are commercially available. The difference in femoral stem design may affect the degree of postoperative stress shielding. In the present study, we aimed to compare the difference in bone mineral density (BMD) change postoperatively in femurs after the use of 1 of the 3 types of cementless stems. Methods. Ninety hips of 90 patients who underwent primary cementless THA for the treatment of osteoarthritis were included in this study. A fit-and-fill type stem was used for 28 hips, a tapered-rectangular Zweymüller type stem was used for 32 hips, and a tapered-wedge type stem was used for 30 hips. The male/female ratio of the patients was 7/21 in the fit-and-fill type stem group, 6/26 in the tapered-rectangular Zweymüller type stem group, and 6/24 in the tapered-wedge type stem group. The mean age at surgery was 59.9 (39–80) in the fit-and-fill type stem group, 61.7 (48–84) in the tapered-rectangular Zweymüller type stem group and 59.6 (33–89) in the tapered-wedge type stem group. To assess BMD change after THA, we obtained dual-energy X-ray absorptiometry scans preoperatively and at 6, 12, 24, and 36 months postoperatively. Results. There were no differences in demographic data, such as gender, age at surgery, and body mass index, among the 3 groups (Table1). In terms of BMD change after THA, no differences were observed in Gruen zones 1–5 among the 3 groups during the 3-year follow-up. The BMD in Gruen zone 6 was maintained in the tapered-wedge type stem group, but decreased by 5% in the fit-and-fill type stem group and by 20% in the tapered-rectangular Zweymüller type stem group (p < 0.01). The BMD loss in Gruen zone 7 was observed in all stem types; however, the BMD loss at 36 months in the tapered-wedge type stem group (−15%) was significantly less than that of the other 2 groups (the fit-and-fill type stem group: −29%; the tapered-rectangular Zweymüller type stem group: −30%; p < 0.001 for both groups) (Figure). Discussion and Conclusion. A difference in postoperative BMD loss was observed among the 3 stem designs. This may be a result of the different fixation concept associated with each stem design. In the present study, we compared the postoperative BMD change after THA among a fit-and-fill type stem, a tapered-rectangular Zweymüller type stem, and a tapered-wedge type stem. BMD in the medial-proximal femur was maintained 3 years after THA in the group with the tapered-wedge type stem, which is fixed in a more proximal part of the femur compared to the other stems

The use of stem provides consistent component alignment with immediate stable fixation and protects grafted bone by reducing stress on metaphyseal area in revision total knee arthroplasty. One of major concern with use of stems involves stem tip pain in cementless diaphyseal engaging stem. The purpose of this study is to evaluate the effect of stem design and method of fixation on stem tip pain in revision total knee arthroplasty by finite element analysis. 3D finite element model of normal tibia was reconstructed from CT scan images of 26 year old male and the CAD model of revision total knee arthroplasty was developed using commercial software(CATIA. ®. , Dassault system, USA, version 8.20). The tibia component models were assembled based on conventional surgical procedure. The design changes of stem such as the length, diameter and slot were performed and methods of fixation including press fit and coefficient of friction was considered. The contact pressure and von-Mises stress around the stem and the micromotion at the interface were evaluated for a 2000 N of external load by finite element analysis to investigate the effect of stem design and methods of fixation on stem tip pain. The longer length and larger diameter press fit stem significantly increase the contact pressure & stress at the end of stem. The distal slot reduces the contact pressure & stress at the end of stem. Less displacement between tibial component and bone was noted in the increased coefficient of friction. It would be better to avoid using press fit stem with extended length and larger diameter in revision total knee arthroplasty. More flexibility of stem tip would be favorable because of less concentration of stress. Stem fixation with higher coefficient of friction would be recommended for less displacement of tibial component. Stem with shorter length enough to engage proximal diaphysis, closer diameter of proximal canal and minimal press fit could be accepted to reduce stem tip pain if patient’s surgical anatomy such as bone loss and quality is tolerable in revision total knee arthroplasty

Introduction:. Extensive bone defects of the proximal femur e.g. due to aseptic loosening might require the implantation of megaprostheses. In the literature high loosening rates of such megaprostheses have been reported. However, different fixation methods have been developed to achieve adequate implant stability, which is reflected by differing design characteristics of the commonly used implants. Yet, a biomechanical comparison of these designs has not been reported. The aim of our study was to analyse potential differences in the biomechanical behaviour of three megaprostheses with different designs by measuring the primary rotational stability in vitro. Methods:. Four different stem designs [Group A: Megasystem-C® (Link), Group B: MUTARS®(Implantcast), Group C: GMRS™ (Stryker) and Group D: Segmental System (Zimmer); see Fig. 1] were implanted into 16 Sawbones® after generating a segmental AAOS Typ 2 defect. Using an established method to analyse the rotational stability, a cyclic axial torque of ± 7.0 Nm along the longitudinal stem axis was applied. Micromotions were measured at defined levels of the bone and the implant [Fig. 2]. The calculation of relative micromotions at the bone-implant interface allowed classifying the rotational implant stability. Results:. All four different implants exhibited low micromotions, indicating adequate primary stability. Lowest micromotions for all designs were located near the femoral isthmus [Fig. 3]. The extent of primary stability and the global implant fixation pattern differed considerably and could be related to the different design concepts. Discussion:. Compared to other implant designs, all stems resulted in low relative motions regardless their design. The conical Megasystem-C® stem seems to lock in the proximal isthmus of the femur, whereas the MUTARS® stem seems to have a total fixation. Its hexagonal cross-section might have a good interlocking effect against rotational force application. Similarly, the GMRS™ stem shows a total fixation with little tendency to the distal part. The very rough porous-coated surface seems to generate a comparable fixation method to the hexagonal MUTARS® stem. However, the four longitudinal expansions in the proximal part of the GMRS™ stem might not have such a high rotational stability effect as expected. Compared to the other stems, the Segmental System stem showed very low relative micromotions in the proximal part. This sharp fluted stem seems to engrave itself into the bone. Within this study all stems seemed to achieve an adequate primary rotational stability. We could show that stem design could qualitatively and quantitatively influence the initial fixation behavior of megaprostheses regarding biomechanical tests, like primary stability measurements in synthetic femurs. These experiences should be considered regarding the choice of stem fixation design in specific defect situations

Aims: The aim of this retrospective study is comparatively analysing cemented versus hydroxyapatite coated cementless þxation. A 10-year survival analysis of 2 patient cohorts operated by the same senior surgeons and with the same stem design was performed. Methods: Between 1990 and 2000, 1207 primary prostheses, 599 cemented and 608 cementless stems have been implanted. When mineral bone density and anatomic shape of the femur advised against inserting a cement-less stem a third generation cementing technique was chosen. In all cases an anatomic CoCr alloy stem and an alumina coupling were employed. Cementless stems were fully coated with hydroxyapatite. To provide homogeneity for preoperative diagnosis, only replacements for primary arthritis were considered. The remaining prostheses were 432 cemented and 366 cementless. The cumulative probability of revision for aseptic loosening of the stem was estimated by the Kaplan-Meier method. Results: 98.5% of the cemented stems and 96.7% of the cementless stems survived at 10 years, the difference between the 2 cohorts being statistically not signiþcant (p> 0.05). Conclusions: Using the same stem design and ceramic coupling, thus avoiding the confounding presence of polyethylene wears debris on study outcomes, allows for the reliable evaluation of stem þxation effectiveness. Noting that the evaluated survival rates are consistent with the literature, we are conþdent that at 10 years cementless stems performed as cemented

Introduction: The purpose of this paper is to present the results of a prospective study involving one stem design used in primary total hip arthroplasty with three different surface enhancements to include a simple textured geometry, a plasma sprayed coating and an hydroxyapatite (HA) coating. Methods: Between 1990 and 1994, 138 patients underwent primary THA using a simple femoral component. Thirty-eight patients received a textured geometry while 50 were implanted with a HA coated stem and 50, a plasma sprayed stem. The hips were evaluated annually both clinically and radiographically. The results are reported using the Harris Hip Score and the Engh radiographic scale to determine the level of bone ingrowth and type of fixation. Results: The average length of follow up is 8 years 11 months (range: 6 to 10 years). The average postoperative Harris Hip scores were 81.0% for the textured stems, 89.6 for the HA coated stems and 85.7 for the plasma sprayed stems. The revision rates are 13.2% for textured stems, 0% for HA and 5.4 % for plasma sprayed. Radiographic results show that fixation of the 3 surface coatings to be optimal in 100% of HA, 88.2% in plasma sprayed and 84.2% in textured. Discussion and conclusion: At this point in the study, it is obvious that the coating enhancement of choice is hydroxyapatite. The next step in this research will be to match the HA coated stems with a comparable porous coated stem of the same design for further comparison

Purpose of the study: The purpose of this prospective controlled trial was to evaluate the influence of the tibial stem design on the primary fixation of the tibial base of a total ankle arthroplasty (TAA) and on radiographic remodelling of adjacent bone. Material and methods: Sixty Salto™ TAA with a short stem were studied with one to three years follow-up. This series was mated with a control series of 60 TAA using conventional ‘cannon’ implants. All patients were assessed clinically with the AOFAS score and radiographically on the loaded ankle. Results: The two consecutive series were reviewed a mean 23 months. The mean AOFAS score at review was 83.6 points (mean gain 45 points). The functional analysis did not disclose any difference between the two series. There was no evidence of tibial piece migration. The incidence of lucent lines, all partial (32.5%) and bone remodelling was higher in the cannon TAA series than in our short-stem TAA series, but the difference did not reach statistical significance. Considering all prostheses together, the incidence of bone condensation was 39.3%; and bone defects 16%. Young age appeared to be the only factor correlated with the development of defects (p=0.01). One progressive defect was grafted. Two prostheses were removed (one talar necrosis and one malposition). Discussion: Primary fixation of the tibial base of the Salto™ prosthesis is excellent, irrespective of the design of the anchor stem. Suppression of the cannon did not reduce statistically the phenomena of osteolysis. The mechanism of the periprosthetic osteolysis is probably plurifactorial, associating biochemical and mechanical factors

Introduction: In total hip arthroplasty (THA) an optimal fit and fill of the stem is essential for stable fixation. Thus femur morphology must be studied during pre-op planning (implant choice, sizing, positioning) or when a new stem is to be designed. Using plain AP x-ray analysis and the definition of a simple two-level parameter (canal flare index, CFI), Noble et al. identified an age related transition of the endosteal canal in AP view from a ‘champagne flute’ to a ‘stove pipe’. This reference data is 2D only, limited to the endosteal geometry and the elderly age range was defined as 60–90yrs so that the number of octogenerians > 80yrs was too low to analyze morphological features of this rapidly growing and critical THA patient population. In this study the endosteal and periosteal femur morphology of subjects > 80yrs was studied using 3D CT analysis. It was the goal to. describe age related changes of the femur morphology in 3D,. to study the influence of gender. to investigate if the results may affect fit & fill of current stem designs. Methods: High-resolution CT-scans (slice thickness 1mm) were made of 170 consenting volunteers (m/ f=101/69). The old group consisted of 119 subjects ≥80yrs (m/f=65/54, mean age: 84.1yrs [80–105]) and the young group of 51 subjects < 80yrs (m/f=36/15, mean age 67.8yrs [39–79]). After thresholding the bone boundaries in Mimics V12 (Materialise, B), the endos-teal and periosteal coordinates were analyzed for width, wall thickness, surface areas and various CFI’s relating dimensions at 20mm above LT and at a distal level (e.g. 60mm below LT, isthmus): Surface CFI (3D-CFI), frontal and lateral CFI based on the AP and ML projections (2D-CFI) and flaring in each of the four directions (1DCFI). Results: The surface CFI was sign. lower in subjects ≥80yrs (5.08 ±1.23) than in subjects < 80yrs (6.61 ±1.72, p< 0.0001). This difference was sign. larger in females than in males (−32% vs. −17%), an observation valid with reference to any distal level. Equivalent age differences were found in both the frontal and lateral 2D-CFI as well as the medial, lateral and anterior 1D-CFI with changes in the anterior direction (−26.3%) being most dominant. In addition wall thickness was sign. reduced in the very elderly. E.g. at 20mm above LT, the medial wall measured 10.40mm at < 80yrs and 7.61 at ≥80yrs, a reduction of −27% (p< 0.001). In females (−35%) this difference was sign. larger (males: −23%, p< 0.001) even when corrected for height. Discussion: The age driven transition of proximal femur morphology continues in the octogenarian population. This transition is not limited to two discrete levels in the AP plane as previously reported but it is a continuous 3D phenomenon with high directional asymmetry. In addition, this transition also affects the wall thickness and the periosteal shape. Furthermore a strong gender effect was identified with aging females showing increasingly and asymmetrically less flaring and thinner walls. An age and gender specific THA stem design seems necessary to fit the morphed femur. The asymmetric transition prohibits the effective use of current implant systems with proportionally scaled dimensions but favors a matrix sizing scheme with frontal and lateral dimensions changing independently

One of the most important characteristic of the developmental dysplastic hip (DDH) is high anteversion in femoral neck. Neck-shaft angle is also understood to be higher (i.e. coxa-valga) in DDH femora. From this understanding many DDH intended stems were designed having larger neck shaft angle. According to the result of our prior study; reported in ISTA 2005 etc.; using computer 3-D virtual surgery of high fit-and-fill lateral flare stem into high anteversion patients, it was revealed that the geometry of proximal femur itself does not have big difference from normal femora but they are only rotated blow lessertrochanter. It is very important to know what anteversion is, and where anteversion is located, to design a better stem and to decide more proper surgical procedures for DDH cases with high anteversion. In the present study, the geometry of 57 femora was assessed in detail to reveal the geometry of anteversion and its location in the DDH femora. Fifty seven CAT scan data with many causes were analyzed. Thirty-two DDH, 3 Rheumatic Arthritis (RA), 2 metastatic bone tumors, 4 avascular necrosis (AVN), 1 knee arthritis, 12 injuries, and 3 normal candidates were included. Whole femoral geometries were obtained from CAT scan DICOM data and transferred to CAD geometry data format. All the following landmarks were measured its direction by the angle from posterior condylar line. The assessed landmarks were. anteversion,. lesser trochanter,. linea aspera at the middle of the femur, and two more (upper 1/6, 2/6 level of aspera) linea aspera directions were assessed between ii) and iii). All the directions were measured by the angle from the medial of the femur. The direction of anteversion and lesser trochanter were well correlated, (R=0.55, Y=0.56X−35) i.e. femoral head and lesser trochanter were rotated together. The direction of lesser trochanter and aspera in upper 1/6 section had no relation even they are located very close with only several cm distance, (R=−0.03, Y=−0.02X−88) i.e. however the lesser trochanter was rotated, the upper most aspera was located almost at the same direction (−87.5+/−7.58 degree). The direction of aspera at upper 1/6 and middle femur were strongly correlated. (R=0.63, Y=0.81X-22) i.e. they stay at the same direction. The results mean that the anteversion is a twist between normal proximal femur (from femoral head and lesser trochanter) and normal distal femur. The twist was located just blow lesser trochanter within several centimeter. The anteversion has been understood as the abnormal mutual position between femoral neck and femoral shaft. In high anteversion hips the neck shaft angle was also believed to be higher, so several DDH oriented stems have higher neck shaft angle i.e. coxa-valga geometries. It has been believed that the location of the anteversion was around neck part. This study revealed that the deformity was located in the very narrow part just below lesser trochanter. It has been discussed that DDH oriented stems should have fit to different canal geometries, but understanding the biomechanics of abnormal anteversion and its treatment should be more important

Background

There is increasing impetus to use rapid recovery care pathways when treating patients undergoing total hip arthroplasty (THA). The direct anterior (DA) approach is a muscle sparing technique that is believed to support these new pathways. Implants designed for these approaches are available in both collared and collarless variations and understanding the impact each has is important for providing the best treatment to patients.

Increasing pressure to use rapid recovery care pathways when treating patients undergoing total hip arthroplasty (THA) is evident in current health care systems for numerous reasons. Patient autonomy and health care economics has challenged the ability of THA implants to maintain functional integrity before achieving bony union. Although collared stems have been shown to provide improved axial stability, it is unclear if this stability correlates with activity levels or results in improved early function to patients compared to collarless stems. This study aims to examine the role of implant design on patient activity and implant fixation. The early follow-up period was examined as the majority of variation between implants is expected during this time-frame.

Patients (n=100) with unilateral hip OA who were undergoing primary THA surgery were recruited pre-operatively to participate in this prospective randomized controlled trial. All patients were randomized to receive either a collared (n=50) or collarless (n=50) cementless femoral stem. Patients will be seen at nine appointments (pre-operative, < 2 4 hours post-operation, two-, four-, six-weeks, three-, six-months, one-, and two-years). Patients completed an instrumented timed up-and-go (TUG) test using wearable sensors at each visit, excluding the day of their surgery. Participants logged their steps using Fitbit activity trackers and a seven-day average prior to each visit was recorded. Patients also underwent supine radiostereometric analysis (RSA) imaging < 2 4 hours post-operation prior to leaving the hospital, and at all follow-up appointments.

Nineteen collared stem patients and 20 collarless stem patients have been assessed. There were no demographic differences between groups. From < 2 4 hours to two weeks the collared implant subsided 0.90 ± 1.20 mm and the collarless implant subsided 3.32 ± 3.10 mm (p=0.014). From two weeks to three months the collared implant subsided 0.65 ± 1.54 mm and the collarless implant subsided 0.45 ± 0.52 mm (p=0.673). Subsidence following two weeks was lower than prior to two weeks in the collarless group (p=0.02) but not different in the collared group. Step count was reduced at two weeks compared to pre-operatively by 4078 ± 2959 steps for collared patients and 4282 ± 3187 steps for collarless patients (p=0.872). Step count increased from two weeks to three months by 6652 ± 4822 steps for collared patients and 4557 ± 2636 steps for collarless patients (p=0.289). TUG test time was increased at two weeks compared to pre-operatively by 4.71 ± 5.13 s for collared patients and 6.54 ± 10.18 s for collarless patients (p=0.551). TUG test time decreased from two weeks to three months by 7.21 ± 5.56 s for collared patients and 8.38 ± 7.20 s for collarless patients (p=0.685). There was no correlation between subsidence and step count or TUG test time.

Collared implants subsided less in the first two weeks compared to collarless implants but subsequent subsidence after two weeks was not significantly different. The presence of a collar on the stem did not affect patient activity and function and these factors were not correlated to subsidence, suggesting that initial fixation is instead primarily related to implant design.

Introduction

There have been many attempts to reduce the risk of femoral component loosening.

Using a tapered stem having a highly polished stem surface results in stem stabilization subsequent to debonding and stem-cement taper-lock and is consistent with force-closed fixation design.

Purpose: Dislocation after THA is a multifactorial challenge involving patient, surgical and implant variables. The extramedullary features of a hip implant—offset, neck length, height, version, and head/neck ratio—significantly impact the stability of the reconstruction. We report a significant difference in dislocation rate between two different femoral stems.

Methods: Between May, 1998 and October, 2003, 263 primary THAs were performed by a single surgeon, utilizing identical surgical technique. Acetabular fixation was cementless with 3 varieties of cups in 262 hips and cemented in one hip. 141 hips had a single cemented femoral component (C-Stem, DePuy, Warsaw, Indiana), and 122 hips had a single cementless design (S-ROM, DePuy, Warsaw, Indiana).

Results: Diagnosis, gender, and side were similar between the groups. Mean age of the cemented group was 68.9 years(R 33 to 92) and of the cementless group was 51.9 years (R 19 to 79). The 3 acetabular designs were equally distributed between groups. All hips were implanted with 28 mm heads. There were 12/141 (8.5%) dislocations in the cemented group, and 3/122 (2.5%) dislocations in the cementless group (p < 0.10).

Conclusions: Stability after THA is affected by design features of a femoral implant, including height, neck length, offset, and version. The use of a single stem in all patients may not adequately address individual biomechanic variability. Careful preoperative templating, and the availability of multiple stem designs within a single fixation philosophy, may facilitate matching of extramedullary features to an individual patient’s anatomy in order to optimize postoperative hip stability.

Introduction

Failure of the neck-stem taper in one particular bi-modular primary hip stem due to corrosion and wear of the neck piece has been reported frequently1, and stems were recalled. A specific pattern of material loss on the CoCr neck-piece taper in the areas of highest stresses on the proximal medial male taper was observed in a retrieval study of 27 revised Rejuvenate implants revised after 3 to 38 month time in situ (Stryker, Kalamazoo, MI, USA) (Figure 1). One neck piece exhibited additionally wear marks at the distal end of the flat male neck taper indicating contact with the female taper of the stem. The purpose of this study was to understand the observed failure scenario of bottoming-out by investigating the stem taper morphologies.

Introduction: The CPS-Plus stem (Endoplus UK) is a polished double-taper with a rectangular cross section maintained throughout for rotational stability. There are 5 stem sizes with proportionate offset, together with 5 neck length options, and a unique proximal stem centraliser which has been shown to increase proximal cement pressurisation during insertion in-vitro, assists with alignment of the stem and helps create an even cement mantle. RSA analysis has demonstrated linear subsidence in a vertical plane, without the posterior head migration and valgus tilt associated with other designs.

Data on the CPS-Plus stem has been obtained from a multi-centre prospective clinical trial. 231 hips in 223 patients have been entered into the study. 151 of these have reached 3 years follow-up.

Method: Patients were recruited by surgeons working at three centres in the UK and two in Norway. Merle d Aubigne and Postel, Harris, and Oxford hip scores were recorded pre-operatively and at follow-up (3, 6, 12, 24, 36, 60 months). Radiographic assessment included evaluation of subsidence and the presence of any radiolucencies.

Results: Objective and subjective scoring have indicated very satisfactory results. Radiological subsidence is less than 1.5mm in over 95% of cases and only one stem has subsided more than 3mm. There has been one revision for deep sepsis, 7 dislocations and one femoral fracture, but none of these complications were related to the choice of femoral component. There have been no revisions for aseptic loosening. Kaplan Meier survivorship analysis at 36 months for aseptic stem loosening is 0.997 (95% CI 0.977 – 1) and for all-cause revision is 0.981 (95% CI 0.958 – 1).

Discussion: The tradition of polished tapered stems arose from serendipity and most results have been excellent. The CPS-Plus stem represents an attempt to re-examine the issues relating to rotational stability, subsidence, cement pressurisation and offset. Earlier laboratory studies have now been supplemented by this clinical evaluation, performed in a number of different centres by several surgeons, and the evidence is encouraging.

In particular, the RSA subsidence characteristics, cement pressurisation and rotational stability already associated with this implant in-vitro have been supported by excellent survivorship analysis, and the authors believe that increasing familiarity with the concepts raised by this implant will result in clinical benefits in relation to polished taper cemented stem longevity.