Background. Disruption of the normal relationship between the proximal tibia and fibula is seen in a number of different conditions such as skeletal dysplasias and post-infective deformity, as well as the consequence of lengthening procedures. Radiographic indices for the tibio-fibular relationship at the ankle have been described, but no similar measures have been reported for the proximal articulation. Aim. The purpose of this study was to investigate the normal radiographic relationship between the proximal tibia and fibula in children to determine the normal range and variation. Methods. Our radiology database was used to identify a sample of 500 normal anteroposterior radiographs of paediatric knees. All radiographs were reviewed by a single observer. The distance from the corner of the lateral tibial plateau to both the proximal tibial (PT) and fibular physes (PF) were measured, and a ratio of the two calculated (PF/PT). The process was repeated with a sample of 100 radiographs by the same observer, and a second independent observer in order to calculate intra-and inter-observer reliability. Results. The age range of patients in this study was 4–16 years, with mean age 12.7. The mean PF/PT ratio was 1.7 (standard deviation 0.2, range 1.3–2.0). Intra-observer reliability was 100% and inter-observer reliability was 97.8%. Conclusion. The results of this study demonstrate that in the normal paediatric knee, there is a consistent relationship between the position of the proximal tibial and fibular physes, with a small range of variation. The PF/PT ratio is a simple and reliable way of assessing the relationship between the proximal tibia and fibula in children, using a standard anteroposterior radiograph. This ratio could be very useful in the diagnosis and planning of surgical management of a number of different causes of tibial and fibular deformities in children

Unknown femur orientation during X-ray imaging may cause inaccurate radiographic measurements. The aim of this study was to assess the effect of 3D femur orientation during radiographic imaging on the measurement of greater trochanter to femoral head centre (GT-FHC) distance.

Three-dimensional femoral shapes (n=100) of unknown gender were generated using a statistical shape model based on a training data of 47 CT segmented femora. Rotations in the range of 0° internal to 50° external and 50° of flexion to 0° of extension (at 10 degree increments) were applied to each femur. A ray tracing algorithm was then used to create 2D images representing radiographs of the femora in known 3D orientations. The GT-FHC distance was then measured automatically by identifying the femoral head, shaft axis and tip of greater trochanter.

Uniaxial rotations had little impact on the measurement with mean absolute error of 0.6 mm and 3.1 mm for 50° for pure external rotation and 50° pure flexion, respectively. Combined flexion and external rotation yielded more significant errors with 10° around each axis introducing a mean error of 3.6 mm and 20° showing an average error of 8.8 mm (Figure 1.). In the cohort we studied, when the femur was in neutral orientation, the tip of greater trochanter was never below the femoral head centre.

Greater trochanter to femoral head centre measurement was insensitive to rotations around a single axis (i.e. flexion or external rotation). Modest combined rotations caused the tip of greater trochanter to appear more distal in 2D and led to deviation from the true value. This study suggests that a radiograph with the greater trochanter appearing below femoral head centre may have been acquired with 3D rotation of the femur.

For any figures or tables, please contact the authors directly by clicking on ‘Info & Metrics’ above to access author contact details.

INTRODUCTION

One of the main goals of total knee arthroplasty (TKA) is to restore an adequate range of motion. The posterior femoral offset (PFO) may have a significant influence on the final flexion angle after TKA. The purpose of the present study was to compare the conventional, radiologic measurement of the PFO before and after TKA to the intra-operative, navigated measurement of the antero-posterior femoral dimension before and after TKA implantation.

Introduction: Leg length inequality (LLI) following arthroplasty, though often asymptomatic, can be cause for considerable morbidity and has increasing medicolegal consequences.

There are various methods of quantifying leg length inequality on plain AP radiograph. The aim of this study is to review the established practice in the measurement of leg length inequality and compare it to two methods used locally.

Methods: This is a retrospective study assessing the radiographs of 35 patients with a mix of native, unilateral and bilateral total hip arthroplasty. Two methods of measuring leg length inequality were prominent in the literature, the Woolson method and the Williamson method. A further two methods are used locally. Measurements for all four techniques were made by two senior consultant radiologist to on the trust PACS to assess inter and intra observer variability. Data analysis was performed using SPS 16 to produce intraclass correlation co-efficient (ICC) and Bland Altman plots.

Results: ICC for all methods in the measurement of LLI is excellent (≥0.90). The repeatability ICC for the four methods is; Woolson 0.65, Williamson 0.87, Direct 0.96 and the Leeds method 0.95.

Discussion: This study demonstrates that all four methods have excellent correlation; however the repeatability is better for the Direct and the Leeds methods than the two that are more widely used in the literature. While the Direct measurement is able to give an overall measurement for the leg length inequality, the Leeds method is able to distinguish between any inequality due to cup malpostion and stem malposition. It is therefore of particular value in the assessment of bilateral or revision arthroplasty and the audit of practice.

The trend toward evidence-based decision-making in orthopedics requires the analysis of large sets of data in real time that can direct clinical decision-making. We have developed an automated web-based electronic data capture (EDC) software system designed to simplify and make more time and cost efficient orthopedic data collection and analysis. The purpose of this study is to validate the radiographic alignment tool of the EDC software system. The goal was to establish the feasibility of using this web-based EDC tool in clinical practice.

Twenty-eight consecutive unilateral TKAs were performed on 28 patients. Coronal mechanical axis and sagittal tibial and femoral axis radiographic measurements were obtained preoperatively and 1 month postoperatively. The radiographs were uploaded to a web-based EDC knee surgery data analysis program that includes a radiographic measurement tool. Two blinded observers analyzed the radiographs; one using a conventional manual measurement tool and the other a web based measurement tool. A paired t-test was used to evaluate measurement variation between observers.

There was no statistically significant difference in pre-operative mechanical axis (.18°, p> .05), postoperative mechanical axis (.25°, p> .05), postoperative femoral component axis (.68°, p> .05), and postoperative tibial component axis (1.07°, p> .05) measurements performed using the manual tool and the web-based software systems.

The results of this study validate the ability of the web-based software system to collect and process radiographic measurements. An automated web-based EDC software system allows for the full integration of patient demographic, radiographic, and peri-operative clinical variables in a fully searchable, instantaneously updatable and easily analyzed database. It is anticipated that this unique approach will allow surgeons to gather a wealth of searchable and quantifiable data that can quickly, accurately, economically, and efficiently shape clinical decisions.

Hip abductor tears(AT) have long been under-recognized, under-reported and under-treated. There is a paucity of data on the prevalence, morphology and associated factors. Patients with “rotator cuff tears of the hip” that are recognized and repaired during total hip arthroplasty(THA) report comparable outcomes to patients with intact abductor tendons at THA. The study was a retrospective review of 997 primary THA done by a single surgeon from 2012–2022. Incidental findings of AT identified during the anterolateral approach to the hip were documented with patient name, gender, age and diagnosis. The extent and size of the tears of the Gluteus medius and Minimus were recorded. Xrays and MRI's were collected for the 140 patients who had AT and matched 1:1 with respect to age and gender against 140 patients that had documented good muscle quality and integrity. Radiographic measurements (Neck shaft angle, inter-teardrop distance, Pelvis width, trochanteric width and irregularities, bodyweight moment arm and abductor moment arm) were compared between the 2 groups in an effort to determine if any radiographic feature would predict AT. The prevalence of AT were 14%. Females had statistically more tears than males(18vs10%), while patients over the age of 70y had statistically more tears overall(19,7vs10,4%), but also more Gluteus Medius tears specifically(13,9vs5,3%). Radiographic measurements did not statistically differ between the tear and control group, except for the presence of trochanteric irregularities. MRI's showed that 50% of AT were missed and subsequently identified during surgery. Abductor tears are still underrecognized and undertreated during THA which can results in inferior outcomes. The surgeon should have an high index of suspicion in elderly females with trochanteric irregularities and although an MRI for every patient won't be feasible, one should always be prepared and equipped to repair the abductor tendons during THA

Anterior approach total hip arthroplasty (AA-THA) has a steep learning curve, with higher complication rates in initial cases. Proper surgical case selection during the learning curve can reduce early risk. This study aims to identify patient and radiographic factors associated with AA-THA difficulty using Machine Learning (ML). Consecutive primary AA-THA patients from two centres, operated by two expert surgeons, were enrolled (excluding patients with prior hip surgery and first 100 cases per surgeon). K- means prototype clustering – an unsupervised ML algorithm – was used with two variables - operative duration and surgical complications within 6 weeks - to cluster operations into difficult or standard groups. Radiographic measurements (neck shaft angle, offset, LCEA, inter-teardrop distance, Tonnis grade) were measured by two independent observers. These factors, alongside patient factors (BMI, age, sex, laterality) were employed in a multivariate logistic regression analysis and used for k-means clustering. Significant continuous variables were investigated for predictive accuracy using Receiver Operator Characteristics (ROC). Out of 328 THAs analyzed, 130 (40%) were classified as difficult and 198 (60%) as standard. Difficult group had a mean operative time of 106mins (range 99–116) with 2 complications, while standard group had a mean operative time of 77mins (range 69–86) with 0 complications. Decreasing inter-teardrop distance (odds ratio [OR] 0.97, 95% confidence interval [CI] 0.95–0.99, p = 0.03) and right-sided operations (OR 1.73, 95% CI 1.10–2.72, p = 0.02) were associated with operative difficulty. However, ROC analysis showed poor predictive accuracy for these factors alone, with area under the curve of 0.56. Inter-observer reliability was reported as excellent (ICC >0.7). Right-sided hips (for right-hand dominant surgeons) and decreasing inter-teardrop distance were associated with case difficulty in AA-THA. These data could guide case selection during the learning phase. A larger dataset with more complications may reveal further factors

This pilot study reports the clinical outcomes of a combination of partial subscapularis tendon transfer and small-head hemiarthroplasty in patients with rotatator cuff arthropathy. A total of 30 patients (30 shoulders; eight men and 22 women) with a mean age of 74 years (55 to 84) were assessed at a mean follow-up of 31 months (24 to 60). The inclusion criteria were painful cuff tear arthropathy with normal deltoid function and a non-degenerative subscapularis muscle and tendon and a preserved teres minor. Outcome was assessed using the University of California Los Angeles score, the Japanese Orthopaedic Association score, and the Oxford Shoulder Score. Radiographic measurements included the centre of rotation distance and the length of the deltoid. All clinical scores were significantly improved post-operatively. The active flexion and external rotation improved significantly at the most recent follow-up (p < 0.035). Although the mean centre of rotation distance changed significantly (p < 0.001), the mean length of the deltoid did not change significantly from the pre-operative value (p = 0.29). The change in the length of the deltoid with < 100° flexion was significantly less than that with > 100° (p < 0.001). Progressive erosion of the glenoid was seen in four patients. No patient required revision or further surgery. A combination of partial subscapularis tendon transfer and small-head hemiarthroplasty effectively restored function and relieved pain in patients with rotator cuff arthropathy. Cite this article: 2015;97-B:1090–5

Introduction. Patients with reduced lumbar spine mobility are at higher risk of dislocation after THA as their hips have to compensate for spinal stiffness. Therefore our study aimed to 1) Define the optimal protocol for identifying patients with mobile hips and stiff lumbar spines and 2) Determine clinical and standing radiographic parameters predicting high hip and reduced lumbar spine mobility. Methods. This prospective diagnostic cohort study followed 113 consecutive patients with end-stage hip osteoarthritis (OA) awaiting THA. Radiographic measurements were performed for the lumbar lordosis angle, pelvic tilt and pelvic-femoral angle on lateral radiographs in the standing, ‘relaxed-seated’ and ‘deep-seated’ (i.e. torso maximally leaning forward) position. A “hip user index” was calculated in order to quantify the contribution of the hip joint to the overall sagittal movement performed by the femur, pelvis and lumbar spine. Results. Radiographs in the relaxed-seated position had an accuracy of 56% (95%CI:46–65%) to detect patients with stiff lumbar spines, compared to a detected rate of 100% in the deep-seated position. The mean ‘hip user index’ was 63±12% and ten patients (9%) were hip users, having an index of 80% or more. A standing pelvic tilt of ≥18.5° was the only predictor for being a hip user with a sensitivity of 90% and specificity of 71% (AUC 0.83). Patients with a standing pelvic tilt ≥18.5° and an unbalanced spine with a flatback deformity had a 30xfold relative risk (95%-CI:4–226; p<0.001) of being a hip user. Conclusion. Patients awaiting THA and having high hip and reduced lumbar spine mobility can be screened for with lateral standing radiographs of the spinopelvic complex and a thorough clinical examination. If the initial screening is positive, radiographs in the deep-seated position allow for better identification of patients being ‘hip users’ compared to radiographs in the relaxed-seated position

Aims. Our study aimed to 1) determine if there was a difference for the HOOS-PS score between patients with stiff/normal/hypermobile spinopelvic mobility and 2) to investigate if functional sagittal cup orientation affected patient reported outcome 1 year post-THA. Methods. This prospective diagnostic cohort study followed 100 consecutive patients having received unilateral THA for end-stage hip osteoarthritis. Pre- and 1-year postoperatively, patients underwent a standardized clinical examination, completed the HOOS-PS score and sagittal low-dose radiographs were acquired in the standing and relaxed-seated position. Radiographic measurements were performed for the lumbar-lordosis-angle, pelvic tilt (PT), pelvic-femoral-angle and cup ante-inclination. The HOOS-PS was compared between patients with stiff (ΔPT<±10°), normal (10°≤ΔPT≤30°) and hypermobile spinopelvic mobility (ΔPT>±30°). Results. Preoperatively, 16 patients demonstrated stiff, 70 normal and 14 hypermobile spinopelvic mobility without a difference in the HOOS-PS score (66±14/67±17/65±19;p=0.905). One year postoperatively, 43 patients demonstrated stiff, 51 normal and 6 hypermobile spinopelvic mobility. All postoperative hypermobile patients had normal spinopelvic mobility preoperatively and showed significantly worse HOOS-PS scores compared to patients with stiff or normal spinopelvic mobility (21±17/21±22/35±16;p=0.043). Postoperatively, patients with hypermobile spinopelvic mobility demonstrated no significant difference for the pelvic tilt in the standing position compared to the other two groups (19±8°/16±8°/19±4°;p=0.221), but a significantly lower sagittal cup ante-inclination (36±10°/36±9°/29±8°;p=0.046). Conclusion. The present study demonstrated that patients with normal preoperative and postoperative spinopelvic hypermobility show worse HOOS-PS scores than patients with stiff or normal spinopelvic mobility. The lower postoperative cup ante-inclination seems to force the pelvis to tilt more posteriorly when moving from the standing to seated position (spinopelvic hypermobility) in order to avoid anterior impingement. Thus, functional cup orientation in the sagittal plane seems to affect postoperative patient reported outcome

Spinopelvic mobility describes the change in lumbar lordosis and pelvic tilt from standing to sitting position. For 1° of posterior pelvic tilt, functional cup anteversion increases by 0.75° after total hip arthroplasty (THA). Thus, spinopelvic mobility is of high clinical relevance regarding the risk of implant impingement and dislocation. Our study aimed to 1) determine the proportion of OA-patients with stiff, normal or hypermobile spino-pelvic mobility and 2) to identify clinical or static standing radiographic parameters predicting spinopelvic mobility. This prospective diagnostic cohort study followed 122 consecutive patients with end-stage osteoarthritis awaiting THA. Preoperatively, the Oxford Hip Score, Oswestry Disability Index and Schober's test were assessed in a standardized clinical examination. Lateral view radiographs were taken of the lumbar spine, pelvis and proximal femur using EOS© in standing position and with femurs parallel to the floor in order to achieve a 90°-seated position. Radiographic measurements were performed for the lumbar lordosis angle (LL), sacral slope (SS), pelvic tilt (PT), pelvic incidence (PI) and pelvic-femoral-angle (PFA). The difference in PT between standing and seated allowed for patient classification based on spino-pelvic mobility into stiff (±30°). From the standing to the sitting position, the pelvis tilted backwards by a mean of 19.6° (SD 11.6) and the hip was flexed by a mean of 57° (SD 17). Change in pelvic tilt correlated inversely with change in hip flexion. Spinopelvic mobility is highly variable in patients awaiting THA and we could not identify any clinical or static standing radiographic parameter predicting the change in pelvic tilt from standing to sitting position. In order to identify patients with stiff or hypermobile spinopelvic mobility, we recommend performing lateral view radiographs of the lumbar spine, pelvis and proximal femur in all patients awaiting THA. Thereafter, implants and combined cup inclination/anteversion can be individually chosen to minimize the risk of dislocation. No predictors could be identified. We recommend performing sitting and standing lateral view radiographs of the lumbar spine and pelvis to determine spinopelvic mobility in patients awaiting THA

Introduction. Up to 15 % of patients report anterior knee pain (AKP) after a total knee arthroplasty (TKA). The correlation of radiographic patellar measurements and post-operative AKP remains controversial. The purpose of this study was to determine whether any radiographic measurements can predict anterior knee pain after TKA. Methods. We performed a retrospective analysis of data on 343 patients who underwent a primary unilateral TKA between 2009–2012 at a single institution. Post-operative radiographs were evaluated with standing anteroposterior, lateral, and merchant views. Radiographic assessment was performed to assess posterior offset, Insall Salvati ratio, Blackburne, PP angle, Patella thickness, Congruence angle, Patella tilt, and patella displacement. Clinical function was assessed by the Kujala anterior knee pain scale at a minimum of 5 years. Patients were asked if they currently had anterior knee pain post-operatively by responding “yes” or “no.” There were 264 females and 79 males; the mean age at surgery was 64.2 ± 9.7 (range, 42–92 years) years; the mean BMI 31±5.8 kg/m. 2. (range, 18.8–49 kg/m. 2. ). Results. Of the 343 patients, 46 patients (13.4%) patients suffered persistent AKP at a minimum 5 years follow-up. Radiographic measurements were performed. Although we had large variations in congruence angle, patellar tilt and patellar displacement, these variations had no correlation with anterior knee pain (p=0.885). We were not able to detect statistical significance among clinical outcome Kujala score and patient reported AKP (p=0.713) at minimum 5 year follow-up. Discussion. Persistent anterior knee pain is troubling to patients and surgeons. Clinicians often get concerned when they see variability in these radiographic findings. Our findings suggest that variations in radiographic parameters do not predict anterior knee pain following total knee replacement surgery. For figures, tables, or references, please contact authors directly

Introduction. Total knee arthroplasty (TKA) reliably improves pain and function in patients with knee osteoarthritis (OA), though a substantial percentage of patients remain unsatisfied. Reasons include the presence of complications, persistent pain, and unmet expectations. The aim of this study was to determine whether the sequential addition of accelerometer-based navigation of the distal femoral cut and sensor-assisted soft tissue balancing changed complication rates, radiographic alignment, or patient-reported outcomes (PROs) compared to TKA performed with conventional instrumentation. Methods. This retrospective cohort study included 371 TKAs in 319 patients. All surgeries were performed by a single surgeon in sequential fashion using a measured resection technique with a goal of mechanical alignment. The historical control group, utilizing intramedullary guides for distal femoral resection and surgeon-guided soft tissue balancing, was compared to group 1 (accelerometer-based navigation for distal femoral resection, surgeon-guided balancing) and group 2 (navigated femoral resection, sensor-guided balancing). Primary outcome measures were PROMIS scores including physical function computerized adaptive test (PF CAT), and the Global 10 health assessment (including physical, mental, and pain scores), and Knee Injury Osteoarthritis and Outcome Score (KOOS), measured preoperatively and at 6 weeks and 12 months postoperatively. Radiographic measurements included component position and overall mechanical alignment of the limb and were made at 6 weeks by a single examiner from hip to ankle standing films. Charts were reviewed for pre- and postoperative ROM at 6 weeks, polyethylene insert morphology, and postoperative hematocrit change. Complications were recorded, including manipulation under anesthesia and reoperation. Our study was powered to detect a difference of 1 standard deviation in PF CAT score with 100 patients. Statistical analysis was performed by a statistician including t-tests, multivariate regression, and time series plot analyses. Results. There were 194 patients in the control group, 103 in group 1, and 74 in group 2. There was no difference in baseline patient demographics. Patients in group 2 had higher baseline mental health subscores than control and group 1 patients (53.2 vs 50.2 vs 50.2, p=0.04). There were no differences in 6-week and one-year postop PF CAT, physical or mental subscores, pain scores, or KOOS scores (all p>0.05). There were 8 total complications in the control group (4.1%), 4 in group 1 (3.8%), and 1 in group 2 (1.4%) (p>0.4). The postoperative mechanical axis of the limb was within 3 degrees of neutral in 71.6% of control patients, 74.8% in group 1, and 85.1% in group 2 (p=0.1). There was no difference in femoral component coronal alignment between groups (p=0.91), though controls had a small but significantly higher degree of flexion in the sagittal plane (6.5 degrees) than groups 1 and 2 (5.4 degrees in both, p=0.003). There was no difference in postoperative ROM or blood loss. Conclusions. The sequential addition of imageless navigation of the distal femoral cut and sensor-guided ligament balancing did not confer any benefit to short term PROs, radiographic outcomes, or complication rates over conventional techniques. While overall mechanical alignment of the limb was improved in groups 1 and 2 compared to controls, this did not reach statistical significance. The additive costs of navigation and soft-tissue balancing technologies may not be justified. For figures, tables, or references, please contact authors directly

Introduction. The changes in sagittal spino-pelvic balance from standing to sitting in patients with end-stage osteoarthritis (OA) of the hip remain poorly characterized. Our aim was to 1) investigate the contribution of sagittal spino-pelvic movement and hip flexion when moving from a standing to sitting posture in patients with hip OA; 2) determine the proportion of OA-patients with stiff, normal or hypermobile spino-pelvic mobility and 3) identify radiographic parameters correlating with spino-pelvic mobility. Methods. This prospective diagnostic cohort study followed 116 consecutive patients with end-stage osteoarthritis awaiting THR. All patients underwent preoperative standardized radiographs (lateral view) of the lumbar spine, pelvis and proximal femur using EOS© in standing position and with femurs parallel to the floor in order to achieve a 90°-seated position. Radiographic measurements performed included lumbar lordosis (LL), sacral slope (SS), pelvic tilt (PT), pelvic incidence (PI) and pelvic-femoral-angle (PFA). The difference in PT between standing and seated allowed for patient classification based on spino-pelvic mobility into stiff (<±10°), normal (±10–30°), or hypermobile (>±30°). Results. From the standing to the sitting position, the pelvis tilted backwards by a mean of 19.1° (SD 12.8) and the hip was flexed by a mean of 56.6° (SD 17.2). Change in pelvic tilt correlated inversely with change in hip flexion (r=−0.68; P<0.01; r. 2. =0.47). Thirty-two patients (28%) had stiff, 68 (58%) normal and 16 (14%) hypermobile spino-pelvic mobility. Multivariate regression analysis adjusted for patient age, BMI, static LL, SS, PI, PT and PFA showed a correlation for static standing SS and the change in PT (p=0.03; β=2.31; r. 2. =0.34). Conclusion. Hip flexion contributes on average 75% (25–100%) of the motion required to sit upright. Pre-operative assessment would identify patients with spino-pelvic hypermobility (associated greater change in cup orientation) or stiffness (associated increased hip range-of-movement), which would be at greater risk of dislocation

Background. Load transfer to the bone is believed to be more physiological around the short stem in total hip arthroplasty (THA). However, we found unusual bony remodeling around the shortened tapered femoral stem. Methods. Among 121 consecutive THA using the same shortened tapered stem, 25 hips were excluded because the lateral cortex was already disturbed by previous surgery on the proximal femur. Sixteen hips were also excluded either because direct measurement was unavailable due to improperly taken final radiographs (n=9) or the patient was lost to follow-up (n=7).80 THAs were finally enrolled. Radiographic measurements were made using anteroposterior (AP) radiographs taken immediately and at 2 years after surgery. The thickness of the lateral cortex at the level of the distal end of the coated surface and at 10, 20, 30, and 40 mm proximal to it were measured. Variables for detecting the causative factors were age, gender, BMI, proximal femoral geometry, whether the surgery was done to dominant side, diagnosis leading to surgery, size and offset of the stem, articulation, alignments and operative time. Results. The mean thickness of the lateral cortical bone measured at 10, 20, 30, and 40 mm above the tip of the proximal coating significantly decreased over the course of the 2 years (P<0.001 each). In 46 cases (57.5%), this presented as an intra-cortical osteolytic line (IOL). The mean thickness of the lateral cortex was reduced by more than 10% in 51 cases (63.8%). Sixty-one cases (76.3%) had either an IOL or showed a reduction in lateral cortical thickness greater than 10%. In 37 cases (46.3%), the lateral cortical thickness decreased by more than 20%. The risk of a mean reduction >20% was related to an increased operating time (odds ratio [OR] = 0.981; 0.966 < 95% confidence interval [CI] < 0.996) and lower body mass index (BMI) (OR = 1.216; 1.043 < 95% CI < 1.417). There was one periprosthetic fracture through the atrophied lateral cortex in one patient, The mean reduction of lateral cortex in this patient was 33.2%. Conclusion. Even with THA using a shortened stem, high incidence of proximal stress shielding was noted in the form of lateral cortical atrophy, especially for the patient with low BMI

Introduction. Anterior knee pain (AKP) is a recognized cause of patient's dissatisfaction after total knee arthroplasty. Potential implant/technique related contributors to AKP are patellofemoral maltracking, trochlear geometry, femoral malrotation, patellar tilt and overstuffing. The primary aim of this prospective, matched pair study was to assess the safety, efficacy and performance of an anatomic patella and its effect on AKP in in a matched pair analysis. Material and Methods. Between July 2012 and May 2013, 55 consecutive posterior stabilized cemented Attune TKAs (Depuy) were matched to the PFC Sigma group based on age, gender, and body mass index (BMI). All surgeries were performed via medial parapatellar approach with patellar resurfacing. Clinical and radiographic analysis was performed prospectively with minimum 6 month follow-up. Radiographic measurements included overall limb alignment, anterior offset, posterior offset, joint line, patellar thickness, patellar tilt and patellar displacement by two independent observers. Results. The mean functional outcomes were similar in both groups. AKP incidence between Attune and PFC was statistically insignificant (3.6% and 3.8%). Radiographic analysis revealed no mal-alignment, or osteolysis. No complications such as infection, patellar fracture, subluxation or dislocations were observed. Discussion. Attune knee design demonstrates excellent short-term safety and efficacy. At minimum 6-month follow-up, anatomical patella with shows less AKP than single radius patella design. Longer follow-up is required to assess functional outcome this design

Background. Acetabulum positioning affects dislocation rates, component impingement, bearing surface wear rates, and need for revision surgery. Novel techniques purport to improve the accuracy and precision of acetabular component position, but may come have significant learning curves. Our aim was to assess whether adopting robotic or fluoroscopic techniques improve acetabulum positioning compared to manual THA during the learning curve. Methods. Three types of THAs were compared in this retrospective cohort: 1) the first 100 fluoroscopically guided direct anterior THAs (fluoroscopic anterior, FA) done by a posterior surgeon learning the anterior approach, 2) the first 100 robotic assisted posterior THAs done by a surgeon learning robotic assisted surgery (robotic posterior, RP) and 3) the last 100 manual posterior THAs done by each surgeon (total 200 THAs) prior to adoption of novel techniques (manual posterior, MP). Component position was measured on plain radiographs. Radiographic measurements were done by two blinded observers. The percentage of hips within the surgeons' target zone (inclination 30°–50°, anteversion 10°–30°) was calculated, along with the percentage within the safe zone of Lewinnek (inclination 30°–50°; anteversion 5°–25°) and Callanan (inclination 30°–45°; anteversion 5°–25°). Relative risk and absolute risk reduction were calculated. Variances (square of the SDs) were used to describe the variability of cup position. Results. 76% of MP THAs were within the surgeons' target zone compared with 84% of FA THAs and 97% of RP THAs. This difference was statistically significant, associated with a relative risk reduction of 87% (RR 0.13 [0.04–0.40], p<.01, ARR 21%, NNT 5) for RP compared to MP THAs. Compared to FA THAs, RP THAs were associated with a relative risk reduction of 81% (RR 0.19 [0.06–0.62], p<.01, ARR 13%, NNT 8). Variances were lower for acetabulum inclination and anteversion in RP THAs (14.0 and 19.5) as compared to the MP (37.5 and 56.3) and FA (24.5 and 54.6) groups. These differences were statistically significant (P<.01). Conclusion. Adoption of robotic techniques delivers significant and immediate improvement in the precision of acetabular component positioning during the learning curve. While fluoroscopy has been shown to be beneficial with experience, a learning curve exists before precision improves significantly

Introduction. Stiffness after total knee arthroplasty (TKA) has been reported to occur due to component malpositioning and/or oversizing, improper femoral component (FC) flexion and tibial component (TC) slope, tight extension gap, inaccurate joint line placement, deficient posterior osteophyte resection, heterotopic ossification (HO), poor patellofemoral joint reconstruction, poor posterior condylar offset restoration, and/or posterior cruciate ligament (PCL) under-resection or retraction. However, the importance of these potential factors for stiffness are not well documented in the medical literature. The aim of this study was therefore to evaluate specific radiographic parameters in patients who had stiffness after primary TKA. Material and Methods. An IRB-approved retrospective chart review was performed to identify patients that were revised due to stiffness after TKA. We defined stiffness as 15º or more of flexion contraction, less than 75º of flexion or a range of motion (ROM) of 90º with the chief complaint of limited ROM and pain. Patients with history of previous revisions and/or ORIF, infection, or isolated polyethylene exchange were excluded. Patients with a minimum of 1 year radiographic follow-up were included. Radiographic measurements were performed as described by the Knee Society TKA Roentgenographic Evaluation System (KSRES). Two blinded observers performed all measurements. Descriptive data is reported as mean (range). Inter-observer correlations were reported using Intraclass correlations coefficient (ICC). Results. A total of 44 patients met the inclusion criteria. Of those, 13 (30%) were male and 31 (70%) were female. Mean BMI was 33.9 kg/m2 (19.5–58). ICCs ranged from good to excellent (>0.8) for all measurements performed. Coronal FC and TC alignments were 95.29º (82.4º–100.6º) and 89.16º (84.4º–94.2º) respectively. HO ranged from 0 to 3 (0:43%, 1:36%, 2:11%, 3:10%). FC-Flexion and TC-slope were 10.17 (3.5–19.8) and 86.7 (61.2–99.2) respectively. Insall-Salvati ratio was 1.01 (0.58–2.04). Posterior condylar offset (CO) ratio was 0.51 (0.34–1.11). Anterior CO ratio was 0.2 (0–0.34). Anterior femoral cortex notching ranged from 0 to 3 (0:39%, 1:43%, 2:14%, 3:4%). Femoral posterior osteophytes were observed in 32% of patients. A gap between the anterior flange and the femoral cortex was observed in 45% of patients. The patella was resurfaced in 93% of patients with a mean patellar tilt and patellar displacement of 5.34º (−8.9º to 5.34º) and 9.88% (−5 to 41%) respectively. Conclusion. To our knowledge this is the first study reporting specific radiographic data on postoperative stiffness following primary TKA. From the observed radiographic measurements, the increased mean femoral component flexion, the high amount of postoperative HO and posterior osteophytes, and the anterior cortical and component gap suggest possible risk factors influencing the occurrence of postoperative stiffness. Future focus will include a matched control population of patients in order to establish statistical significance of all observed values

This study aimed to define the rates of lower limb angular correction using temporary hemiepiphysiodesis in differing skeletal pathologies. A retrospective review of 61 children (36M:25F) with angular deformities about the knee who underwent 8-plate hemiepiphysiodesis (mean age 10.8y) was undertaken. The children were divided into 9 groups based on their underlying pathology (lower limb hypoplasia, Blount's disease, skeletal dysplasia, rickets, metabolic disease, acquired growth disturbance, vascular malformation, steroid use and complex genetic disorders). Radiographic measurements of each limb segment was undertaken using the TraumaCad® digital templating software based on standing long-leg radiographs - mechanical lateral distal femoral angle (mLDFA) and mechanical medial proximal tibial angle (mMPTA). The rate of correction of each parameter was calculated as a function of the time lapse between the operation date and first radiographic evidence of full correction of the mechanical axis (zone 1). A total of 144 limb segments (80 distal femoral, 64 proximal tibial physes) were analysed. 62.5% of children had mechanical axes outside the knee joint at the time of operation; 63.2% achieved full correction. The rate of angular correction at the distal femur (mLDFA) was quickest in those with acquired growth disturbance (1.15°/month), complex genetic disorders (1.12°/month) and rickets (0.93°/month). It was slowest in those with vascular malformation (0.40°/month), lower extremity hypoplasia (0.44°/month) and metabolic disease (0.49°/month). At the proximal tibia, mMPTA correction was quickest in those with acquired growth disturbance (0.77°/month) and skeletal dysplasia (0.57°/month); whilst being slowest in those with metabolic disease (0.22°/month) and Blount's disease (0.29°/month). The rate of angular correction about the knee varies with the underlying pathology with correction rates varying up to 3-fold. This study demonstrated the differential rate of correction of angular deformities in children with different skeletal pathologies, which would help guide the timing of hemiepiphysiodesis

Introduction. Mechanically aligned total knee arthroplasty(TKA) relies on restoring the hip-knee-ankle angle of the limb to neutral or as close to a straight line as possible. This principle is based on studies that suggest limb and knee alignment is related long term survival and wear. For that cause, there has been recent attention concerning computer-assisted TKA and robot is also one of the most helpful instruments for restoring neutral alignment as known. But many reported data have shown that 20% to 25% of patients with mechanically aligned TKA are dissatisfied. Accordingly, kinematically aligned TKA was implemented as an alternative alignment strategy with the goal of reducing prevalence of unexplained pain, stiffness, and instability and improving the rate of recovery, kinematics, and contact forces. So, we want to report our extremely early experience of robot-assisted TKA planned by kinematic method. Materials and Methods. This study evaluated the very short term results (6 weeks follow up) after robot-assisted TKA aligned kinematically. 50 knees in 36 patients, who could be followed up more than 6 weeks after surgery from December 2014 to January 2015, were evaluated prospectively. The diagnosis was primary osteoarthritis in all cases. The operation was performed with ROBODOC (ISS Inc., CA, USA) along with the ORTHODOC (ISS Inc., CA, USA) planning computer. The cutting plan was made by single radius femoral component concept, each femoral condyles shape-matched method along the transverse axis using multi-channel CT and MRI to place the implant along the patient's premorbid joint line. Radiographic measurements were made from long bone scanograms. Clinical outcomes and motion were measured preoperatively and 6 weeks postoperatively. Results. The range of motion increased from preoperative mean 113.4 (±5.4, 85 to 130) to postoperative mean 127.3 (±7.4, 90 to 140) at last follow up. The mean knee score and functional score improved from 35.4 (±10.3, 10 to 55) and 30.1 (±7.7, 10 to 60) before surgery to 88.6 (±5.8, 60 to 100) and 90.7 (±9.6, 60 to 100) at last follow up. The WOMAC score was improved from 52(±15.5) to 20(±14.8) at last follow up. The postoperative Hip-knee-ankle alignment was −1.3±2.8. The femoral component was 2.1 valgus and tibial component was 2.8 varus along the mechanical axis in coronal plane. There were no complications and failures. Conclusion. On the basis of our results, we are cautiously optimistic about robot-assisted TKA by kinematically alignment. More anatomic alignment of the implant can be associated with better flexion and better clinical outcomes scores in the kinematically aligned method in our thinking. But, at this starting point, more comparative studies with mechanical aligned group are needed and we must explore about implant survivalship issues and implant loading issues in dynamic and static condition that someone is worrying about. If the problem can be solved, there is no use worrying about it in our thinking. And what is more, the robot-assisted surgery will be very useful especially in those cases of severely deformed knees and distorted anatomy to be aligned kinematically