Aim. Diagnosing periprosthetic joint infections (PJI) can be very challenging, especially infections caused by low virulence microorganisms. No single test with a 100% accuracy is available yet. Hence, different infection definitions were introduced to improve the diagnostic confidence and quality of research articles. Due to constant developments in this field, infection definitions are adopted continuously. The aim of our study was to find the most sensitive currently available infection definition among three currently used criteria (International Consensus Meeting – criteria 2018 (ICM), Infectious Diseases Society of America - criteria 2013 (IDSA), and European Bone and Joint Infection Society – criteria 2021 (EBJIS)) for the diagnosis of PJI. Method. Between 2015 and 2020, patients with an indicated revision surgery due to septic or aseptic failure after a total hip or knee replacement were included in this retrospective analysis of prospectively collected data. A standardized diagnostic workup was done in all patients. The components of the IDSA-, ICM-, and EBJIS- criteria for the diagnosis of PJI were identified in each patient. Results. Overall, 206 patients (hip: n=104 (50%); knee: n=102 (50%)) with a median age of 74 years (IQR 65 – 80y) were included. 101 patients (49%) were diagnosed with PJI when using the EBJIS- criteria. Based on the IDSA- and ICM- criteria, 99 patients (48%, IDSA) and 86 patients (42%, ICM) were classified as septic. Based on all three criteria, 84 cases (41%) had an infection. 15 septic cases (n=15/206; 7%) were only identified by the IDSA- and EBJIS- criteria. In 2 patients (n=2/206, 1%), an infection was present based on only the ICM and EBJIS criteria. No case was classified as infected by one infection definition alone. A statistically significant higher number of inconclusive cases was observed when the ICM criteria (n=30/206; 15%) were used in comparison to the EBJIS criteria (likely infections: n=16/206; 8%) (Fisher's exact test, p=0.041). The EBJIS definition showed a better preoperative performance in comparison to the other two definitions (p<0.0001). Conclusions. The most sensitive infection definition seems to be the novel EBJIS– criteria covering all infections diagnosed by the IDSA- and ICM-criteria without detecting any further infection. In addition, less inconclusive (infection likely) cases were detected by the EBJIS-criteria in comparison with the ICM-criteria reducing the so called ‘grey zone’ significantly which is of utmost importance in clinical routine

This study evaluates patient reported outcome measurement information system (PROMIS) scores after total hip arthroplasty (THA) and total ankle arthroplasty (TAA) in matched cohorts, while simultaneously evaluating implant survivorship and 90-day hospital utilization. It is hypothesized that while both procedures would yield similar PROMIS score improvements, THA would demonstrate superior mid-term implant survivorship. Primary THA and TAA patients from 2015–2022 with minimum one-year follow-up were retrospectively reviewed. After applying exclusion criteria, 2,092 THAs and 478 TAAs were included for analysis. Demographics, pre- and post-operative patient reported outcome measures (PROMs), revision surgeries, ED visits, and re-admissions were collected. THA and TAA patients were then propensity score matched at 2:1 ratio for age, sex, race, BMI, ASA, and comorbidities, resulting in a final cohort of 844 THAs and 455 TAAs for comparison. There were similar pre-operative PROMIS Pain Interference (PI) scores between THA and TAA, with both showing improvement at six weeks. However, THA patients exhibited lower PI scores at one year (53.0 versus 54.0; p=0.009). Pre-operative PROMIS Physical Function (PF) was worse in THA patients but showed greater improvement compared to TAA patients at both six weeks (p<0.001) and one year (p<0.001). Pre-operative PROMIS depression scores were similar and improved similarly in both groups. Joint-specific PROMs (HOOS for THA and FAAM for TAA) improved in both cohorts. THA demonstrated superior survivorship free of all-cause revision at five years compared to TAA (95% versus 77%; p<0.0001). Patients undergoing THA or TAA experienced significant improvements in their general and joint-specific PROMs post-operatively. However, patients undergoing THA demonstrated higher PROMIS PI and PF scores at one-year when compared to TAA, as well as improved survivorship. Generic PRO instruments enable comparison of medical treatments in different anatomic sites to the patients overall health

Anterior cervical discectomy and fusion (ACDF) is a well-established spinal operation for cervical disc degeneration disease with neurological compromise. The procedure involves an anterior approach to the cervical spine with discectomy to relieve the pressure on the impinged spinal cord to slow disease progression. The prosthetic cage replaces the disc and can be inserted stand-alone or with an anterior plate that provides additional stability. The literature demonstrates that the cage-alone (CA) is given preference over the cage-plate (CP) technique due to better clinical outcomes, reduced operation time and resultant morbidity. This retrospective case-controlled study compared CA versus CP fixation used in single and multilevel anterior cervical discectomy and fusion for myelopathy in a tertiary centre in Wales. A retrospective clinico-radiological analysis was undertaken, following ACDF procedures over seven years in a single tertiary centre. Inclusion criteria were patients over 18 years of age with cervical myelopathy who had at least six-month follow-up data. SPSS was used to identify any statistically significant difference between both groups. The data were analysed to evaluate the consistency of our findings in comparison to published literature. Eighty-six patients formed the study cohort; 28 [33%] underwent ACDF with CA and 58 [67%] with CP. The patient demographics were similar in both groups, and fusion was observed in all individuals. There was no statistical difference between the two constructs when assessing subsidence, clinical complication (dysphagia, dysphonia, infection), radiological parameters and reoperations. However, a more significant percentage [43% v 61%] of patients improved their cervical lordosis angle with CP treatment. Furthermore, the study yielded that surgery to upper cervical levels results in a higher incidence of dysphagia [65% v 35%]. Finally, bony growth across the cage was observed on X-ray in 12[43%] patients, a unique finding not mentioned in the literature previously. Our study demonstrates no overall difference between the two groups, and we recommend careful consideration of individual patient factors when deciding what construct to choose

Source of the study: University of Auckland, Auckland, New Zealand and University of Otago, Christchurch, New Zealand. Patient reported outcome measures (PROMs) are predictors of knee arthroplasty revision. Unicompartmental knee arthroplasty (UKA) is effective for patients with the correct indications, however has higher revision rates than total knee arthroplasty (TKA). Different revision thresholds for the procedures have been postulated. Our aims were to investigate: 1) if PROMs could predict knee arthroplasty revision within two years of the score at six months, five years and ten years follow-up, and 2) if revision ‘thresholds’ differed between TKA and UKA. All TKAs and UKAs captured by the New Zealand Joint Registry between 1999 and 2019 with at least one OKS response at six months (TKA n=27,708, UKA n=8,415), five years (TKA n=11,519, UKA n=3,365) or ten years (TKA n=6,311, UKA n=1,744) were included. were propensity-score matched 2:1 with UKAs for comparison of revision thresholds. Logistic regression indicated that for every one-unit decrease in OKS, the odds of TKA and UKA revision decreased by 10% and 11% at six months, 10% and 12% at five years and 9% and 5% at ten years. Fewer TKA patients with ‘poor’ outcomes (≤25) subsequently underwent revision compared with UKA at six months (5.1% vs. 19.6%, p<0.001), five years (4.3% vs. 12.5%, p<0.001) and ten years (6.4%vs. 15.0%, p=0.02). Compared with TKA, UKA patients were 2.5 times more likely to undergo revision for ‘unknown’ reasons, bearing dislocations and disease progression. The OKS is a strong predictor of subsequent knee arthroplasty revision within two years of the score from early to late term. A lower revision threshold was found with UKA when compared with a matched TKA cohort. Higher revision rates of UKA are associated with both lower clinical thresholds for revision and additional modes of UKA failure

Validation of a new meniscal root repair technique that will be biomechanically superior to current gold standard procedures and, at the same time, will allow controlled adjustable fixation. Medial and lateral meniscus from 10 porcine knees were collected. An iatrogenic posterior root tear was created and a single transosseous tibial tunnel technique that closely replicates the repair procedure with a 2-mm-wide-knottable braided tape was performed. Randomly, in one group (A) two simple cinch stitch were applied to suture the posterior root of the meniscus and, in the other group (B), a simple stich that holds the meniscus in two points in a crosse match configuration was used. For final fixation, alternating surgeon's knots (A group) and a doubled suture knot that allows an adjustable fixation were used (B group). All repairs were standardized for location and the repair stiches were placed in the body of the meniscus. The new suture configuration (B group) showed a better biomechanical performance in terms of load for both the medial [151,0-560,3] 306,9±173,8N and the lateral posterior root fixation [268,2-463,1] 347,4±74,3N in comparison to the cinch stitch (A group) [219,0-365,2] 268,9±58,7N and [219,0-413,6] 318,0±72N. The maximum stiffness was also higher for the new tested suture configuration (B group) for both the medial meniscus [10,6-34,5] 18,9±9,2N/mm vs [7,1-12,7] 10,9±2,2N/mm and the lateral meniscus [16,0-27,9] 21,6±5,5N/mm vs [7,6-15,6] 12,6±3,5N/mm. The presented new meniscal root repair is biomechanically superior to current gold standard techniques, as the cinch stich made with tape, keeping the simplicity and reproducibility of the procedure and, at the same time, is economically advantageous since a single tape in needed and allows adjustable fixation of the repair over a button

To ensure clinical relevance, the in vitro engineering of tissues for implantation requires artificial replacements to possess properties similar to native anatomy. Our overarching study is focussed on developing a bespoke bone-tendon in vitro model replicating the anatomy at the flexor digitorum profundus (FDP) tendon insertion site at the distal phalanx. Anatomical morphometric analysis has guided FDP tendon model design consisting of hard and soft tissue types. Here, we investigate potential materials for creation of the model's bone portion by comparison of two bone cements; brushite and genex (Biocomposites Ltd). 3D printed molds were prepared based on anatomical morphometric analysis of the FDP tendon insertion site and used to cast identical bone blocks from brushite and genex cements. Studies assessing the suitability of each cement type were conducted e.g. setting times, pH on submersion in culture medium and interaction with fibrin gels. Data was collected using qualitative imaging and qualitative measurements (N=3,n=6) for experimental conditions. Both brushite (BC) and genex (GC) cements could be cast into bespoke molds, producing individual blocks and were mixed/handled with appropriate setting times. On initial submersion in culture medium, BC caused a reduction in pH values (7.49 [control]) to 6.85) while GC remained stable (7.59). Reduction in pH value also affected fibrin gel interaction where gel was seen to be detaching/not forming around BC and medium discolouration was noted. This was not observed in GC. While GC outperformed BC in initial tests, repeated washing of BC led to pH stabilisation (7.5,3xwashes), consistent with their further use in this model. This study has compared BC and GC as materials for bone block production. Both materials show promise, and current work assessing material properties and cell proliferation are needed to inform our choice for use in our FDP-tendon-bone interface model. This research was supported by an ORUK Studentship award (ref:533). Genex was kindly provided by Biocomposites, Ltd

Early micromotion of hip implants measured with radiostereometric analysis (RSA) is a predictor for late aseptic loosening. Computed Tomography Radiostereometric Analysis (CT-RSA) can be used to determine implant micro-movements using low-dose CT scans. CT-RSA enables a non-invasive measurement of implants. We evaluated the precision of CT-RSA in measuring early stem migration. Standard marker-based RSA was used as reference. We hypothesised that CT-RSA can be used as an alternative to RSA in assessing implant micromotions. We included 31 patients undergoing Total Hip Arthroplasty (THA). Distal femoral stem migration at 1 year was measured with both RSA and CT-RSA. Comparison of the two methods was performed with paired-analysis and Bland-Altman plots. Furthermore, the inter- and intraobserver reliability of the CT-RSA method was evaluated. No statistical difference was found between RSA and CTMA measurements. The Bland-Altman plots showed good agreement between marker-based RSA and CT-RSA. The intra- and interobserver reliability of the CT-RSA method was found to be excellent (≥0.992). CT-RSA is comparable to marker-based RSA in measuring distal femoral stem migration. CTMA can be used as an alternative method to detect early implant migration

Aims. The aim of this study was to compare the preinjury functional scores with the postinjury preoperative score and postoperative outcome scores following anterior cruciate ligament (ACL) reconstruction surgery (ACLR). Methods. We performed a prospective study on patients who underwent primary ACLR by a single surgeon at a single centre between October 2010 and January 2018. Preoperative preinjury scores were collected at time of first assessment after the index injury. Preoperative (pre- and post-injury), one-year, and two-year postoperative functional outcomes were assessed by using the Knee injury and Osteoarthritis Outcome Score (KOOS), Lysholm Knee Score, and Tegner Activity Scale. Results. We enrolled 308 males and 263 females of mean age 27 years (19 to 46). The mean preinjury and preoperative post-injury Lysholm Knee Scores were 94 (73 to 100) and 63 (25 to 85), respectively, while the respective mean scores at one and two years postoperatively were 84 (71 to 100) and 89 (71 to 100; p < 0.001). The mean Tegner preinjury and preoperative post-injury scores were 7 (3 to 9) and 3 (0 to 6), respectively, while the respective mean scores at one and two years postoperatively were 6 (1 to 8) and 6 (1 to 9) (p < 0.001). The mean KOOS scores at preinjury versus two years postoperatively were: symptoms (96 vs 84); pain (94 vs 87); activities of daily living (97 vs 91), sports and recreation function (84 vs 71), and quality of life (82 vs 69), respectively (p < 0.001). Conclusion. Functional scores improved following ACLR surgery at two years in comparison to preoperative post-injury scores. However, at two-year follow-up, the majority of patients failed to achieve their preinjury scores. The evaluation of ACLR outcomes needs to consider the preinjury scores rather than the immediate preoperative score that is usually collected. Cite this article: Bone Jt Open 2023;4(1):46–52

Increased collection of patient-reported outcome measures (PROM) in registries enables international comparison of patient-centered outcomes after knee and hip replacement. We aimed to investigate 1) variations in PROM improvement, 2) the possible confounding factor of BMI, and 3) differences in comorbidity distributions between registries. Registries affiliated with the International Society of Arthroplasty Registries (ISAR) or OECD membership countries were invited to report aggregate EQ-5D, OKS, OHS, HOOS-PS and KOOS-PS values. Eligible patients underwent primary total, unilateral knee or hip replacement for osteoarthritis within three years and had completed PROMs preoperatively and either 6 or 12 months postoperatively, excluding patients with subsequent revisions. For each PROM cohort, Chi-square tests were performed for BMI distributions across registries and 12 predefined PROM strata (male/female, age 20-64/65-74/>75, high or low preoperative PROM scores). Comorbidity distributions were reported for available comorbidity indexes. Thirteen registries from 9 countries contributed data, n~130000 knee (range 140 to 79848) and n~113000 hip (range 137 to 85281). Mean EQ-5D index values (10 registries) ranged from 0.53 to 0.71 (knee) and 0.50 to 0.70 (hips) preoperatively and 0.78 to 0.85 (knee) and 0.83 to 0.87 (hip) postoperatively. Mean OKS (6 registries) ranged from 19.3 to 23.6 preoperatively and 36.2 to 41.2 postoperatively. Mean OHS (7 registries) ranged from 18.0 to 23.2 preoperatively and 39.8 to 44.2 postoperatively. Four registries reported KOOS-PS and three reported HOOS-PS. Proportions of patients with BMI >30 ranged from 35 to 62% (10 knee registries) and 16 to 43% (11 hip registries). For both knee and hip registries, distributions of patients across six BMI categories differed significantly among registries (p30 were for patients in the youngest age groups (20 to 64 and 65 to 74 years) with the lowest baseline scores. Additionally, females with lowest preoperative PROM scores had highest BMI. These findings were echoed for the OHS and OKS cohorts. Proportions of patients with ASA scores ≥3 ranged from 7 to 42% (9 knee registries) and 6 to 35% (8 hip registries). PROM-score improvement varies between international registries, which may be partially explained by differences in age, sex and preoperative scores. BMI and comorbidity may be relevant to adjust for

Aim. Perioperative myocardial infarction/injury (PMI) is a common complication in noncardiac surgery, contributing to postoperative morbidity and mortality. We aimed to identify the risk for PMI in periprosthetic joint infection (PJI) in comparison to primary hip (THA) and knee arthroplasty (TKA) and to non-PJI revision surgery. Methods. Patients undergoing primary/revision THA/TKA at a University Hospital who were eligible for the institutional PMI screening and response program were prospectively included. Revision arthroplasties were divided into 2 groups (PJI revision and non-PJI revision). PJI was defined according to the EBJIS criteria, and included DAIR, one-stage and two-stage revisions. Non-PJI revisions included partial and/or complete exchange of components. The primary endpoint was PMI, secondary endpoints were major adverse cardiovascular events (MACE) and all-cause mortality within 120 days. Results. The study population included 673 patients (443 primary THA/TKA, 119 PJI revision, 111 Non-PJI revision) enrolled from 05/2014 to 06/2018. The median age in all groups was 75 years. In primary, non-PJI and PJI revision surgery, 39%, 41% and 50%, respectively were male. PMI occurred in 12% of patients with primary arthroplasty compared to 20% and 35% in non-PJI and PJI revision, respectively (p<0.001 overall), with PJI having a significantly elevated risk over non-PJI revisions (p=0.014). Conversely, in MACE (4% primary vs 9% non-PJI vs 12% PJI, p=0.002) an all-cause mortality (2% primary vs 4% non-PJI vs 9% PJI, p<0.001) no significant difference between PJI and non-PJI revisions was observed. We found no difference for the risk of PMI comparing DAIR vs one-/two-stage PJI revision (p=0.88). In multivariable analysis (primary arthroplasty as reference), significant odds ratios for PMI included PJI (3, 1.7–5.3), coronary artery disease (2.9, 1.9–4.4), chronic heart faiure (1.3, 1.1–1.7) and age (1.1, 1.0–1.1 per each year age). Urgency of surgery, duration of surgery, to the presence of Staphylococcus aureus were not significant. impact on PMI. Conclusion. In PJI, PMI and MACE were 3-times, and death 4.5 times, respectively, more frequently observed than in primary arthroplasty. Also, PJI had the highest odds for PMI (3.0). Orthopaedic surgeons should be aware of the high PMI risk when performing revision surgery. This work confirms the importance of a peri-/postpoperative PMI screening and response program in the field of septic surgery

Introduction. Neck of femur (NoF) fractures have an inherent 6.5% 30-day mortality as per National hip fracture database(2019). Several studies have demonstrated a higher mortality rate in covid positive NoFs but have been unable to demonstrate whether there are risk factors that contribute to the risk of mortality in this patient group or whether COVID is solely responsible for the higher mortality. Aims. To assess risk factors that are concurrently present in a fracture NoF cohort that may contribute to higher mortality in COVID positive patients. Methods. A cross sectional, retrospective study was performed for a period of 1 year starting from 1st March 2020. All surgically treated neck of femur fracture patients having an isolated intra/extracapsular fracture were included in the study. Data fields recorded- patient demographics, date and time of admission, ward discharge, surgery, mode of surgery (fixation/arthroplasty), prehospital AMTS score, residential status and mobility, ASA grade as per anaesthetist's records, date of death (if deceased), cause of death (as per death certificate/ postmortem / coroner's report). Analysis of mortality was carried out by creating a matched comparison group for each risk factor as well as some combinations. Results. 344 patients were surgically treated for a neck of femur fracture in our DGH during the period of 1st March 2020 to 28th February 2021. 46 patients did not receive a COVID swab (reasons unknown) and were excluded from the study. 35 patients had a COVID-19 RT PCR positive test during their hospital stay and 264 patients remained negative. There were 12 deaths in COVID positive patients (34%) and 53 deaths in COVID negative patients (20%) within the time frame of the study. For each risk factor matched group COVID was seen to confer higher mortality in general. There was no mortality in ASA 1 or 2 patients. Mortality rates in matched groups for age and ASA revealed 23.8% mortality in COVID positive as opposed to 17.3% in COVID negative for ASA 3 and 33.3% mortality in COVID positive vs. 28% in ASA 4. 11 out of the 12 COVID positive patients who died had an AMTS score >6. No correlation was seen between COVID positive deaths and preinjury residential status, type of fracture or surgery offered, or preinjury mobility. The average length of hospital stay was much higher for COVID positive patients (19.5days) as compared to 9.5 days for COVID negative patients. Conclusion. Matched group analysis show that there is a 37.5% increase in COVID positive neck of femur fracture mortality in ASA 3 patients, the same number falls to 17.8% for ASA 4 patients. These figures are much lower compared to other studies in the UK. There is a need to understand the real cause of death in this subset and to improve death certification so that we can differentiate between patients whose mortality is ‘due to’ or ‘With’ COVID

Debate continues about the best treatment for patients over 65 years with non-displaced subcapital hip fractures: internal fixation (IF) or hemiarthroplasty (HA). Surgical aggression, mortality, complications and recovery of walking ability after 1year have been compared between both treatments. Match-paired comparison of 2 retrospective cohorts. 220 patients with IF vs 220 receiving a cemented bipolar HA. Matching by age (82.6±7.16 years (65–99)), sex (74.5% women), year of intervention (2013–2021) and ASA scale (24.2% ASA II, 55.8% III, 20.0% IV). Age (p=0.172), sex (p=0.912), year of intervention (p=0.638) and ASA scale (p=0.726) showed no differences. Surgical aggression smaller in IF: Surgical time (p< 0,00001), haemoglobin/haematocrit loss (p <0,00001), need for transfusion (p<0,00008), in-hospital stay (p<0,00001). Mortality: higher in-hospital for hemiarthroplasties (12 deaths (5.5%) vs 1 (0.5%) (p=0.004) (RR=12, 1.5–91.5)). But no significant differences in 1-month (13 hemiarthroplasties, 6%, vs 9 osteosynthesis, 4.1%) and 1-year mortality (33 hemiarthroplasties, 15%, vs 35, 16%). Medical complications: no differences in urinary/respiratory infections, heart failure, ictus, myocardial infarction, digestive bleeding, pressure sores or pulmonary embolus (p=0.055). Surgical complications: no significant differences. HA: 6 intraoperative (2,7%) and 5 postoperative periprosthetic fractures (2,3%), 5 infections (2,3%), 10 dislocations (4,5%), 3 neurovascular injuries. IF: 10 acute fixation failures (4,5%), 2 infections (0,9%), 9 non-unions (4,1%), 16 ischemic necrosis (7,3%). Functional results: no significant differences; 12 patients in each group (5,5%) never walked again (p=1), 110 HA (50%) and 100 IF (45.5%) suffered worsening of previous walking ability (p=0.575), 98 HA (44%) and 108 IF patients (49%) returned to pre-fracture walking ability (p=0.339). Fixation with cannulated screws may be a better option for non-displaced femoral neck fractures because recovery of walking ability and complications are similar, while surgical aggression and in-hospital mortality are lower

Aim. Culture-based conventional methods are still the gold standard to identify microorganisms in hip and knee PJIs diagnosis. However, such approach presents some limitations due to prior antimicrobial treatment or the presence of unusual and fastidious organisms. Molecular techniques, in particular specific real-time and broad-range polymerase chain reaction (PCR), are available for diagnostic use in a suspected PJI. However, limited data is available on their sensitivity and specificity. This study aimed to evaluate the performance of a rapid and simple Investigational Use Only (IUO) version of the BioFire® JI multiplex PCR panel when compared to traditional microbiological procedures. Method. Fifty-eight native synovial fluid samples were recovered from 49 patients (female n=26; male =23) who underwent one or multiple septic or aseptic revision arthroplasties of the hip (n=12) and knee (n=46). The JI panel methodology was used either on specimens freshly collected (n=6) or stored at −80°C in our Musculoskeletal Biobank (n=52). The JI panel performance was evaluated by comparison with culture reference methods. Patient's medical records were retrieved from our institutional arthroplasty registry as well as our prospectively maintained PJI infection database. Results. The JI panel identified additional microorganisms in 3/39 (7.7%) positive cases, and a different microorganism in 1/39 (2.6%) sample. Out of 9/58 (15.5%) culture negative samples, two (22%) were positively detected by the JI panel. In total 49/58 (84%) native synovial fluid specimens were positive by culture methods, versus 39/58 (81.2%) with the JI panel. Ten samples are currently under investigation for confirmatory results. Out of 39 positive detections with the JI panel, 35 (89.7%) were concordant with the identified microorganism (n=29 same species; n=6 same genus). The combined information from the JI panel results and clinical records revealed the existence of 6/58 (10.3%) PJIs’ cases which would have required a different antibiotic therapeutic approach. Conclusions. The work presented, provides additional value for the clinical use of the JI panel to the improvement of PJI management in terms of rapid and successful treatment decisions, patient outcome, and healthcare costs. This technique shows high sensitivity to detect PJIs specific microorganisms in both fresh as well frozen native synovial fluid samples, thus emphasizing its use for retrospective studies analysis

Aims. The optimal choice of management for proximal humerus fractures (PHFs) has been increasingly discussed in the literature, and this work aimed to answer the following questions: 1) what are the incidence rates of PHF in the geriatric population in the USA; 2) what is the mortality rate after PHF in the elderly population, specifically for distinct treatment procedures; and 3) what factors influence the mortality rate?. Methods. PHFs occurring between 1 January 2009 and 31 December 2019 were identified from the Medicare physician service records. Incidence rates were determined, mortality rates were calculated, and semiparametric Cox regression was applied, incorporating 23 demographic, clinical, and socioeconomic covariates, to compare the mortality risk between treatments. Results. From 2009 to 2019, the incidence decreased by 11.85% from 300.4 cases/100,000 enrollees to 266.3 cases/100,000 enrollees, although this was not statistically significant (z = -1.47, p = 0.142). In comparison to matched Medicare patients without a PHF, but of the same five-year age group and sex, a mean survival difference of -17.3% was observed. The one-year mortality rate was higher after nonoperative treatment with 16.4% compared to surgical treatment with 9.3% (hazard ratio (HR) = 1.29, 95% confidence interval (CI) 1.23 to 1.36; p < 0.001) and to shoulder arthroplasty with 7.4% (HR = 1.45, 95% CI 1.33 to 1.58; p < 0.001). Statistically significant mortality risk factors after operative treatment included age older than 75 years, male sex, chronic obstructive pulmonary disease (COPD), cerebrovascular disease, chronic kidney disease, a concomitant fracture, congestive heart failure, and osteoporotic fracture. Conclusion. Mortality risk factors for distinct treatment modes after PHF in elderly patients could be identified, which may guide clinical decision-making. Cite this article: Bone Joint Res 2023;12(2):103–112

Abstract. Introduction. Ultrasonic cutting in surgery has great potential. However, a key limitation is heat created by friction between the bone and the blade. Bone has poor thermal conductivity which hinders the dissipation of heat, causing cell death near the cut site In addition, ultrasonic vibration may create microcracks. It was hypothesised that these effects on bone would vary with the frequency and displacement of the ultrasonically powered blade. Therefore varying frequencies and displacements of the tip of the blade were studied to find the combination with fewest microcracks and lowest temperature rise at the bone-tool interface. Aim. To explore the effect of different frequencies and tip displacements of ultrasonic cutting devices on the amount of thermal and mechanical damage. Methods. In vitro tests were conducted on fresh rat femoral shafts using two different frequencies; 20kHz and 35kHz.Two displacement amplitudes of two different frequencies were used: 23.9 μm (p-p) and 7.5 μm (p-p) both at 20kHz and 18.7 μm (p-p) and 27 μm (p-p) both at 35kHz and. Cooling was used to emulate clinical conditions. Histological examination (H & E and TUNEL) was performed to identify live and dead cells. Further rat femoral shafts (n=6) were exposed to the same number of cuts by each tool to identify any micro-damage induced by different electrical currents using Micro-CT and confocal Laser scanning microscope. All experimental data were expressed as mean ± standard deviation. Statistical analysis was performed using one-way ANOVA, followed by Post Hoc multiple comparisons test. Differences between groups were considered statistically significant at p < 0.05. Results. The cut site at 7.5 μm (p-p) in 20kHz displayed only indentation instead of a cut, and was excluded. Histological examination revealed a high incidence of cell death at the cutting edge, in both frequencies. At 35kHz and 27 μm (p-p) some charring was evident, while at 20kHz and 23.9 μm (p-p) more irregularities were seen on the surface of the cut indicating instability during cutting when this setting was used. In contrast, the 35kHz at 18.7 μm (p-p) resulted in a smoother cutting surface. The highest cell death percentage ranged from 25% (at 35kHz, 18.7 μm (p-p)) to 44 % (at 35kHz, 27 μm (p-p)). Most of the tool's effect was located within 25 µm of the cut surface. There was a significant decrease to < 5 % at 200 µm. No cell death was found over 200 µm from the cut surface in both frequencies (35 kHz and 20 kHz). No significant difference in total percentage cell death was found between cutting at 35kHz and 18.7 μm (p-p) and at 20kHz and 23.9 μm (p-p). No microcracks were detected along the depth of the cut site at either frequency. Conclusion. Of the 2 ultrasonic cutting frequencies tested, the combination of the higher vibration frequency (35kHz) and the lower displacement amplitude (18.7 μm (p-p) demonstrated least damage to the bone tissue. No microcracks were displayed when using either of the ultrasonic cutting frequencies. Declaration of Interest. (b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project

Most previous studies investigating autograft options (quadriceps, hamstring, bone-patella-tendon-bone) in primary anterior cruciate ligament (ACL) reconstruction are confounded by concomitant knee injuries. This study aims to investigate the differences in patient reported outcome measures and revision rates for quadriceps tendon in comparison with hamstring tendon and bone-patella-tendon-bone autografts. We use a cohort of patients who have had primary ACL reconstruction without concomitant knee injuries. All patients from the New Zealand ACL Registry who underwent a primary arthroscopic ACL reconstruction with minimum 2 year follow-up were considered for the study. Patients who had associated ipsilateral knee injuries, previous knee surgery, or open procedures were excluded. The primary outcome was Knee Injury and Osteoarthritis Outcome Score (KOOS) and MARX scores at 2 years post-surgery. Secondary outcomes were all-cause revision and time to revision with a total follow-up period of 8 years (time since inception of the registry). 2581 patients were included in the study; 1917 hamstring tendon, 557 bone-patella-tendon-bone, and 107 quadriceps tendon. At 2 years, no significant difference in MARX scores were found between the three groups (2y mean score; 7.36 hamstring, 7.85 bone-patella-tendon-bone, 8.05 quadriceps, P = 0.195). Further, no significant difference in KOOS scores were found between the three groups; with the exception of hamstring performing better than bone-patella-tendon-bone in the KOOS sports and recreation sub-score (2y mean score; 79.2 hamstring, 73.9 bone-patella-tendon-bone, P < 0.001). Similar revision rates were reported between all autograft groups (mean revision rate per 100 component years; 1.05 hamstring, 0.80 bone-patella-tendon-bone, 1.68 quadriceps, P = 0.083). Autograft revision rates were independent of age and gender variables. Quadriceps tendon is a comparable autograft choice to the status quo for primary ACL reconstruction without concomitant knee injury. Further research is required to quantify the long-term outcomes for quadriceps tendon use

Introduction. The effect of lower extremity lengthening on physeal growth is still controversial. We aim to compare data of the patients who had bilateral simultaneous femur and tibia lengthening with the patients who underwent the lengthening surgery separately for the femur and tibia at the end of completed skeletal maturation in terms of the effect of physeal growth. Materials and Methods. Twenty-six patients were included who operated in our clinic between 1995 and 2015 for limb lengthening. Fourteen patients with bilateral lengthening of the femur and tibia at the same time were named as simultaneous lengthening (SL). Twelve patients with bilateral lengthening of the femur and then bilateral tibia lengthening seperately were named consecutively lengthening (CL). All patients were followed until completion of growth. The physeal arrest was measured using predicted length (investigated with the multiplier method), the total amount of lengthening and final length. Results. Mean lower limb lengthening was 145 mm (48,5%) and 151 mm (46,6%) for simultaneous and consecutive groups respectively. For lower extremity length, the SL reached 527,6 mm while expected was 447,3 mm. Considering 151 mm lengthening, the mean growth disturbance for the SL was 70,7 mm. The CL group revealed a mean of 47,5 mm disturbance. For total height comparison, disturbance was 80,5mm and 65,4mm respectively. Conclusions. Although simultaneous four segment lengthening have more physiological physeal disturbance effects compared to consecutive operations, there was no statistical difference between the two groups

We compared the rate of revision of two classes of primary anatomic shoulder arthroplasty, stemmed (aTSA) and stemless (sTSA) undertaken with cemented all polyethylene glenoid components. A large national arthroplasty registry identified two cohort groups for comparison, aTSA and sTSA between 1. st. January 2011 and 31. st. December 2020. A sub-analysis from 1 January 2017 captured additional patient demographics. The cumulative percentage revision (CPR) was determined using Kaplan-Meier estimates of survivorship and hazard ratios (HR) from Cox proportional hazard models adjusted for age and gender. Of the 7,533 aTSA procedures, the CPR at 8 years was 5.3% and for 2,567 sTSA procedures was 4.0%. There was no difference in the risk of revision between study groups (p=0.128). There was an increased risk of revision for aTSA and sTSA undertaken with humeral head sizes <44mm (p=0.006 and p=0.002 respectively). Low mean surgeon volume (MSV) (<10 cases per annum) was a revision risk for aTSA (p=0.033) but not sTSA (p=0.926). For primary diagnosis osteoarthritis since 2017, low MSV was associated with an increased revision risk for aTSA vs sTSA in the first year (p=0.048). Conversely, low MSV was associated with a decreased revision risk for sTSA in the first 6 months (p<0.001). Predominantly aTSA was revised for loosening (28.8%) and sTSA for instability/dislocation (40.6%). Revision risk of aTSA and sTSA was associated with humeral head size and mean surgeon volume but not patient characteristics. Inexperienced shoulder arthroplasty surgeons experience lower early revision rates with sTSA in the setting of osteoarthritis. Revision of aTSA and sTSA occurred for differing reasons

Success treating AIS with bracing is related to time worn and scoliosis severity. Temperature monitoring can help patients comply with their orthotic prescription. Routinely collected temperature data from the start of first brace treatment was reviewed for 14 patients. All were female with an average age of 12.4 years (range 10.3–14.6) and average 49o Cobb angle (30–64). Our current service recommendation is brace wear for 20 hours a day. Patients complied with this prescription 38.0% of the time, with four patients averaging this or more. Average brace wear was 16.3 hours per day (3.5–22.2). There were 13 patients who had completed brace treatment. The majority had surgery (7/13; 54%) or were considering surgery (1/13; 8%). There were 5 who did not wish surgery at discharge (5/13; 38%); 1 achieved a 40o Cobb angle, with 4 larger (53o;53o;54o;68o). The Bracing in AIS Trial (BrAIST) study measured “success” as less than a 50o Cobb angle, so using this metric our cohort has had a single “success”. Temperature monitors allowed an analysis of when patients were achieving their brace wear. When comparing daywear (8am-8pm) to nightwear (8pm-8am), patients wore their brace an average of 7.6 hours a day (2.5–11.2) and 8.7 hours a night (0.4–11.5). We conclude the minority of our patients comply with our current 20 hour orthotic prescription. The “success” of brace treatment is lower than comparison studies despite higher average compliance but starting with a larger scoliosis. Brace wear is achieved during both the day and night

Introduction and Objective. Despite pure alumina have shown excellent long-term results in patients undergoing total hip arthroplasty (THA), alumina matrix composites (AMCs) composed of alumina and zirconium oxide are more commonly used. There are no comparative studies between these two different ceramics. We performed a retrospective case-control study to compare results and associated complications between AMC from two manufacturers and those with pure alumina from another manufacturer. Materials and Methods. 480 uncemented THAs with ceramic on ceramic (CoC) bearing surfaces (288 men and 192 women; mean age of 54.1 ± 12.4 years), were implanted from 2010 to 2015. Group 1: 281 THAs with pure alumina; Group 2A: 142 with AMC bearing in a trabecular titanium cup. Group 2B: 57 hips with AMC bearing with a porous-coated cup. Results. The mean follow-up was 7.3 years. There was one late infection in group 1, eight dislocations, three in group 1 (1.1%), three in group 2A (2.1%), all with a 36 mm femoral head, and two in group 2C (3.5%). Liner malseating was found in one hip in group 1, and in five hips in group 2C, of these, there were four liner fractures (7.0%). Four cups were revised for iliopsoas impingement (three in group 1 and one in group 2B). Two cups were revised for aseptic loosening, one in group 1 and one in group 2A, and four revised femoral stems in group 2A, three for subsidence and another for postoperative periprosthetic B. 2. fracture. The mean preoperative Harris Hip Score was 48.6 ± 3.3 in the whole series and 93.9 ± 7.2 at the end of follow-up. The survival rate of revision for any cause was 98.2% (95% Confidence Interval: 96.6–99.8) at ten years for group 1, 95.8% (95% CI: 92.1–99.5) for group 2A, and 91.1% (95% CI: 83.7–98.5) for group 2B (log-rank 0.030). Conclusions. Outcome of uncemented CoC THA in young patients was satisfactory at mid-term in all three groups. However, liner fractures were frequent in group 2B. All dislocated hips in group 2A had a 36 mm femoral head diameter, and revision due to any cause was less frequent in group 1. Pure alumina CoC THA can be used as a benchmark for comparison with newer CoC THAs