Aims

The incidence of limb fractures in patients living with HIV (PLWH) is increasing. However, due to their immunodeficiency status, the operation and rehabilitation of these patients present unique challenges. Currently, it is urgent to establish a standardized perioperative rehabilitation plan based on the concept of enhanced recovery after surgery (ERAS). This study aimed to validate the effectiveness of ERAS in the perioperative period of PLWH with limb fractures.

We assessed the rates of fracture healing in a number of patients in Southern Africa where the Human Immunodeficiency Virus (HIV) is highly prevalent. Our aim was to deduce whether rates of union were affected by HIV and its subsequent clinical stages, including the Acquired Immune Deficiency Syndrome (AIDS). We evaluated 2376 patients with Weber B ankle fractures without talar shift. All the patients included in the study were tested for HIV using the Western Blot system and classified according to the WHO classification (Stages I–IV). From the sample group, 829 patients were HIV negative. 729 were HIV positive belonging to Stages I–III, whilst 755 were HIV positive in stage IV of the disease. Patients were all treated conservatively in below knee casts for a minimum of six weeks. All the patients were aged between 20 and 30. All patients were all part of similar socioeconomic circumstances and were non-smokers who used no dietary supplements. From the sample of patients we reviewed, the results were as follows. In the HIV negative category, 56% of patients had fracture union at 4 weeks, 32% had fracture union at 6 weeks, 10.5% had fracture union at eight weeks and 1.5% of patients suffered non-union of the fractures. In the HIV positive group (WHO Stages I–III), 54.7% of patients had fracture union at 4 weeks, 33.7% had fracture union at 6 weeks, 10.2% had fracture union at 8 weeks and 1.26% of patients suffered non-union. From the HIV positive category (WHO Stage IV), 18.28% of patients had fracture union at four weeks, 32.72% had fracture union at 6 weeks, 36.56% had fracture union at 8 weeks and 12.45% of patients suffered non-union of the fractures. Healing and union were described as sufficient callous formation, no further displacement, and no malleolar tenderness at the time of cast removal. In addition to this, the patients must have been able to fully weight bear. There was no significant statistical difference in fracture union between patients who were HIV negative and the patients with HIV stages one to three. There were significant differences between the above mentioned groups and patients with Stage IV HIV/AIDS. In essence, the more progressive the disease, the higher the rates of non-union

Introduction. The resurgence of TB worldwide has several underlying causes, but HIV infection has undoubtedly been a key factor in the current TB epidemic. Since TB is endemic in the developing world the influence of HIV is of concern, particularly with the emergence of multi-drug-resistant strains. The remarkable susceptibility of patients with AIDS to develop TB has shown the critical role of CD4 lymphocytes in protective immunity. In the absence of immunological surveillance by CD4 cells, 5-10% of persons with latent foci of TB reactivate each year. Aim. This paper highlights the presentation and outcome following treatment in HIV patients with spinal TB. Methods. 81 HIV+ve patients with spinal tuberculosis were prospectively evaluated between 2006 and 2007. The mean age was 31 years and 63% were females. The thoracic spine was affected in 45, lumbar (33) and cervical (3). Non-contiguous lesions were noted in six patients. Sixty-six (81%) patients had neurological deficit. The mean Hb was (10.1gm/dl), mean WCC 4.9, mean lymphocyte count was 1.8, mean ESR 79mm/h and the mean CD4 count was 268 cell/cumm. Co-morbidities were seen in 68% of patients. All patients were optimised prior to treatment. Posterolateral decompression was performed in 29 cases, anterior decompression (25), needle biopsy (13), incision and drainage 5 and 9 were treated non-operatively. Medication included ARV (72 patients) and anti-TB in all patients. Results. The mean follow-up was 21 months. Eleven (13.5%) patients developed wound infection and one child died. Complete recovery occurred in 23 patients (35%). The mean CD4 count was 341 cell/cumm. Conclusion. The short term results are encouraging. These patients are best managed by a multidisciplinary team to monitor potential complications from dual therapy, to ensure compliance and adequate nutrition

Introduction. There have been concerns regarding the quality of training received by Orthopaedic trainees. There has been a reduction in working hours according to the European working times directive. National targets to reduce surgical waiting lists has increased the workload of consultants, further reducing the trainees' surgical experience. Navigation assisted procedures are successfully used in orthopaedics and provides useful feedback to the surgeon regarding precision of implant placement. We investigated the use of navigation aids as an alternative source of training surgical trainees. Methods. We choose a navigation assisted knee replacement (TKR) model for this study. A first year Orthopaedic registrar level trainee was taught the TKR procedure by a scrubbed consultant in 5 cases. He was then trained in use of non-CT based navigation surgery. The Trainee then performed navigation assisted non-complex primary TKR surgery. A consultant Orthopaedic surgeon was available throughout for advice and support. Data collected included pre and post procedure valgus and varus alignment of the knee, total operative time and WOMAC scores pre and post operatively. Results. A total of 42 TKRs were performed. Intra-operative review by the consultant surgeon was necessary on 3 occasions in the first 10 cases and two occasions in the remaining cases. The average operative time reduced from 184.25 minutes in the first 10 cases to 163.11 minutes in the next 20 cases and 150.33 minutes in the next 12 cases. The varus/valgus alignment was corrected to within 8 degrees in all cases. A significant improvement in WOMAC scores was recorded for all patients (p< 0.05). Conclusion. We believe that this model can be used as a training aid in various orthopaedic surgical procedures

With the advent of new hip implants (resurfacing and short stem prosthese) current treatment recommendations have to be reevaluated. The indication for surgical treatment in hip osteoarthritis as well as the choice of implants is mainly based on personal experience of the surgeoun (internal evidence) and clinical data (external evidence). Experimental studies can support the information from clinical trials and are necessary to evaluate the mechanical properties of an implant. They do not replace the clinical evaluation, however.

The level of evidence depends on type, quality and quantity of available data from published investigations. Recent innovations like surface replacement and short stem prostheses have mainly been investigated in single center observational studies with a relatively short followup.

Wider introduction of new implants, however, needs continuous evaluation of clinical and radiographic performance. Examples are given, how this monitoring should be performed in a clinical setting.

Aims. Young adults undergoing total hip arthroplasty (THA) largely have different indications for surgery, preoperative function, and postoperative goals compared to a standard patient group. The aim of our study was to describe young adult THA preoperative function and quality of life, and to assess postoperative satisfaction and compare this with functional outcome measures. Methods. A retrospective cohort analysis of young adults (aged < 50 years) undergoing THA between May 2018 and May 2023 in a single tertiary centre was undertaken. Median follow-up was 31 months (12 to 61). Oxford Hip Score (OHS) and focus group-designed questionnaires were distributed. Searches identified 244 cases in 225 patients. Those aged aged under 30 years represented 22.7% of the cohort. Developmental dysplasia of the hip (50; 45.5%) and Perthes’ disease (15; 13.6%) were the commonest indications for THA. Results. Preoperatively, of 110 patients, 19 (17.2%) were unable to work before THA, 57 (52%) required opioid analgesia, 51 (46.4%) were reliant upon walking aids, and 70 (63.6%) had sexual activity limited by their pathology. One patient required revision due to instability. Mean OHS was 39 (9 to 48). There was a significant difference between the OHS of cases where THA met expectation, compared with the OHS when it did not (satisfied: 86 (78.2%), OHS: 41.2 (36.1%) vs non-satisfied: 24 (21%), OHS: 31.6; p ≤ 0.001). Only one of the 83 patients (75.5%) who returned to premorbid levels of activity did so after 12 months. Conclusion. Satisfaction rates of THA in young adults is high, albeit lower than commonly quoted figures. Young adults awaiting THA have poor function with high requirements for mobility aids, analgesia, and difficulties in working and undertaking leisure activities. The OHS provided a useful insight into patient function and was predictive of satisfaction rates, although it did not address the specific demands of young adults undertaking THA. Function at one year postoperatively is a good indication of overall outcomes. Cite this article: Bone Jt Open 2024;5(4):304–311

Abstract. Robotic-assisted total knee arthroplasty (TKA) has proven higher accuracy, fewer alignment outliers, and improved short-term clinical outcomes when compared to conventional TKA. However, evidence of cost-effectiveness and individual superiority of one system over another is the subject of further research. Despite its growing adoption rate, published results are still limited and comparative studies are scarce. This review compares characteristics and performance of five currently available systems, focusing on the information and feedback each system provides to the surgeon, what the systems allow the surgeon to modify during the operation, and how each system then aids execution of the surgical plan. Cite this article: Bone Jt Open 2023;4(1):13–18

Aims. Though most humeral shaft fractures heal nonoperatively, up to one-third may lead to nonunion with inferior outcomes. The Radiographic Union Score for HUmeral Fractures (RUSHU) was created to identify high-risk patients for nonunion. Our study evaluated the RUSHU’s prognostic performance at six and 12 weeks in discriminating nonunion within a significantly larger cohort than before. Methods. Our study included 226 nonoperatively treated humeral shaft fractures. We evaluated the interobserver reliability and intraobserver reproducibility of RUSHU scoring using intraclass correlation coefficients (ICCs). Additionally, we determined the optimal cut-off thresholds for predicting nonunion using the receiver operating characteristic (ROC) method. Results. The RUSHU demonstrated good interobserver reliability with an ICC of 0.78 (95% CI 0.72 to 0.83) at six weeks and 0.77 (95% CI 0.71 to 0.82) at 12 weeks. Intraobserver reproducibility was good or excellent for all analyses. Area under the curve in the ROC analysis was 0.83 (95% CI 0.77 to 0.88) at six weeks and 0.89 (95% CI 0.84 to 0.93) at 12 weeks, indicating excellent discrimination. The optimal cut-off values for predicting nonunion were ≤ eight points at six weeks and ≤ nine points at 12 weeks, providing the best specificity-sensitivity trade-off. Conclusion. The RUSHU proves to be a reliable and reproducible radiological scoring system that aids in identifying patients at risk of nonunion at both six and 12 weeks post-injury during non-surgical treatment of humeral shaft fractures. The statistically optimal cut-off values for predicting nonunion are ≤ eight at six weeks and ≤ nine points at 12 weeks post-injury

Aims. Patient decision aids have previously demonstrated an improvement in the quality of the informed consent process. This study assessed the effectiveness of detailed written patient information, compared to standard verbal consent, in improving postoperative recall in adult orthopaedic trauma patients. Methods. This randomized controlled feasibility trial was conducted at two teaching hospitals within the South Eastern Sydney Local Health District. Adult patients (age ≥ 18 years) pending orthopaedic trauma surgery between March 2021 and September 2021 were recruited and randomized to detailed or standard methods of informed consent using a random sequence concealed in sealed, opaque envelopes. The detailed group received procedure-specific written information in addition to the standard verbal consent. The primary outcome was total recall, using a seven-point interview-administered recall questionnaire at 72 hours postoperatively. Points were awarded if the participant correctly recalled details of potential complications (maximum three points), implants used (maximum three points), and postoperative instructions (maximum one point). Secondary outcomes included the anxiety subscale of the Hospital and Anxiety Depression Scale (HADS-A) and visual analogue scale (VAS) for pain collected at 24 hours preoperatively and 72 hours postoperatively. Additionally, the Patient Satisfaction Questionnaire Short Form (PSQ-18) measured satisfaction at 72 hours postoperatively. Results. A total of 60 patients were randomized, 32 to the standard group and 28 to the detailed group. Patients in the detailed group had significantly higher total recall score compared to the standard group (mean difference 1.29 points (95% confidence interval (CI) 0.51 to 2.08); p = 0.002). There were no differences in HADS-A (mean difference 0.39 (95% CI -2.11 to 2.88); p = 0.757), VAS pain (mean difference 5.71 (95% CI -22.25 to 11.11); p = 0.499), or PSQ-18 (mean difference 0.499; 95% CI -1.6 to 3.42; p = 0.392). Conclusion. Detailed written tools are useful in improving postoperative recall in adult orthopaedic trauma patients. Cite this article: Bone Jt Open 2023;4(2):104–109

3D printing techniques have attracted a lot of curiosity in various surgical specialties and the applications of the 3D technology have been explored in many ways including fracture models for education, customized jigs, custom implants, prosthetics etc. Often the 3D printing technology remains underutilized in potential areas due to costs and technological expertise being the perceived barriers. We have applied 3D printing technology for acetabular fracture surgeries with in-house, surgeon made models of mirrored contralateral unaffected acetabulum based on the patients’ trauma CT Scans in 9 patients. The CT Scans are processed to the print with all free-ware modeling software and relatively inexpensive printer by the surgeon and the resulting model is used as a ‘reduced fracture template’ for pre-contouring the standard pelvic reconstruction plates. This allows use of the standard surgical implants, saves time on intra-operative plate contouring, and also aids in reduction to an extent. We share through this presentation the workflow of the freeware softwares to use in order to use this surgical planning and implant preparation that may remove the perceived barriers of cost and technology from surgeons that wish to explore using 3D printing technology for acetabular fracture management and may extend applications to other regions

Adult Spine Deformity (ASD) is a degenerative condition of the adult spine leading to altered spine curvatures and mechanical balance. Computational approaches, like Finite Element (FE) Models have been proposed to explore the etiology or the treatment of ASD, through biomechanical simulations. However, while the personalization of the models is a cornerstone, personalized FE models are cumbersome to generate. To cover this need, we share a virtual cohort of 16807 thoracolumbar spine FE models with different spine morphologies, presented in an online user-interface platform (SpineView). To generate these models, EOS images are used, and 3D surface spine models are reconstructed. Then, a Statistical Shape Model (SSM), is built, to further adapt a FE structured mesh template for both the bone and the soft tissues of the spine, through mesh morphing. Eventually, the SSM deformation fields allow the personalization of the mean structured FE model, leading to generate FE meshes of thoracolumbar spines with different morphologies. Models can be selectively viewed and downloaded through SpineView, according to personalized user requests of specific morphologies characterized by the geometrical parameters: Pelvic Incidence; Pelvic Tilt; Sacral Slope; Lumbar Lordosis; Global Tilt; Cobb Angle; and GAP score. Data quality is assessed using visual aids, correlation analyses, heatmaps, network graphs, Anova and t-tests, and kernel density plots to compare spinopelvic parameter distributions and identify similarities and differences. Mesh quality and ranges of motion have been assessed to evaluate the quality of the FE models. This functional repository is unique to generate virtual patient cohorts in ASD. Acknowledgements: European Commission (MSCA-TN-ETN-2020-Disc4All-955735, ERC-2021-CoG-O-Health-101044828)

The Disability of Arm Shoulder and Hand (DASH) score questionnaire is a common self-administered tool to assess symptom severity and function in patients with injuries or pathology of the upper limb. However, having such a pertinent tool only in English is limiting in multi-cultural and multilingual populations where English is not always the first language, such as our South African context. IsiZulu is the most widely spoken language in South Africa (approximately 25% of the population). There are certain instances in research, particularly in international studies, where non-English speaking individuals need to be excluded based on translator reliability. This puts our institutions at a disadvantage by not being able to contribute to research. As per the international Institute of Work and Health (IWH), we followed the 5 stage guidelines to achieve the most appropriate linguistic and cultural adapted translation for our setting. (1) Two independent translations from English to isiZulu. (2) A synthesis of the 2 initial translations. (3) Two independent back-translations from the synthesized isiZulu version into English. (4) Expert panel (consisting of university lecturers and official translators) to review all versions and re-create an optimized synthesized version. (5) Pre-testing of the final optimized synthesized version in a pilot study. This rigorous process allowed for a concise and more culturally relevant translation for use in our population. The fourth stage in the process was integral in synthesizing the tool while considering the colloquial and semantic differences and resolving them with appropriate equivalents. The IWH guidelines aids in the cross-cultural adaptation of the DASH score while remaining valid and comparable to the original English version. This is beneficial in multi-national research projects and allows for the standardization of health outcome measures

Abstract. Extended Trochanteric Osteotomy (ETO) improves surgical exposure and aids femoral stem and bone cement removal in Revision Total Hip Replacement (RTHR) surgery. The aim of this study was to identify healing rates and complications of ETO in RTHR. Methods. From 2012 to 2019 we identified patients who underwent ETO for RTHR. Data collected demographics, BMI, diabetes, anticoagulants, indication for ETO, surgical approach, length of ETO and complications. Descriptive analysis of patient demographics, multiple linear regression analysis was performed to assess ETO complications. Results. There were 63 patients with an average age of 69 years. Indications for ETO were aseptic loosening (30), infection (15), periprosthetic fracture (9), recurrent dislocation (5), broken implant (4). There were 44 cemented and 19 uncemented femoral stem that underwent ETO. Average time from index surgery was 12 years (less than a year to 38 years). All procedures were through posterolateral approach and all ETO were stabilised with cables. Average length of ETO was 12.5cm. BMI varied from 18 to 37. There were 5 diabetics and 16 on anticoagulants. All but one ETO went on to unite. Other complications included infection, dislocations, lateral thigh pain and significant limp. Discussion. Fixation of ETO can be with either wires or cables or plate with cables/screws. Advantages of cables are no irritation over greater trochanter, no disruption of gluteus medius/vastus lateralis continuity, reproducible tension in cables and use of torque limiter minimises loss of tension in cables

Abstract. Purpose. Intracanal rib head penetration is a well-known entity in dystrophic scoliotic curves in neurofibromatosis type 1. There is potential for spinal cord injury if this is not recognised and managed appropriately. No current CT-based classification system is currently in use to quantify rib head penetration. This study aims to propose and evaluate a novel CT-based classification for rib head penetration primarily for neurofibromatosis but which can also be utilised in other conditions of rib head penetration. Materials and methods. The grading was developed as four grades: normal rib head (RH) position—Grade 0, subluxed ext-racanal RH position—Grade 1, RH at pedicle—Grade 2, intracanal RH—Grade 3. Grade 3 was further classified depending on the head position in the canal divided into thirds. Rib head penetration into proximal third (from ipsilateral side)—Grade 3A, into the middle third—Grade 3B and into the distal third—Grade 3C. Seventy-five axial CT images of Neurofibromatosis Type 1 patients in the paediatric age group were reviewed by a radiologist and a spinal surgeon independently to assess interobserver and intraobserver agreement of the novel CT classification. Agreement analysis was performed using the weighted Kappa statistic. Results. There was substantial interobserver correlation with mean Kappa score (k = 0.8, 95% CI 0.7–0.9) and near perfect intraobserver Kappa of 1.0 (95% CI 0.9–1.0) and 0.9 (95% CI 0.9–1.0) for the two readers. Conclusion. The novel CT-based classification quantifies rib head penetration which aids in management planning

Background. Open subtalar arthrodesis has been associated with a moderate rate of non-union, as high 16.3%, and high rates of infection and nerve injury. Performing this operation arthroscopically serves to limit the disruption to the soft tissue envelope, improve union rates and reduce infection. Our study describes our outcomes and experience of this operation. Method. Retrospective review of all patients who underwent an arthroscopic subtalar arthrodesis between 2023 and 2008. We excluded patients undergoing concurrent adjacent joint arthrodesis. The primary aim was to report on rates of union. Secondary outcomes included reporting on conversion to open procedure, duration of surgery, infection, and iatrogenic injury to surrounding structures. Results. 135 patients were included in the final analysis. 129 patients (95.5%) achieved union. The median time to fusion was 98 days. All cases were performed through sinus tarsi portals. 38 cases were performed with an additional posterolateral portal. Most cases (107/77%) were performed with 2 screws. 3 cases (2.2%) were converted to open procedures. The median tourniquet time was 86 minutes but available in only 88 (65%) cases. There were 4 (2.9%) superficial infections and no deep infections. 1 patient sustained an injury to FHL and there were no reported nerve injuries. Conclusions. At present this is the largest series of arthroscopic subtalar arthrodeses. We demonstrate that this operation can achieve high rates of union with low rates of infection with an equally low likelihood of needing to convert to an open procedure with modest operative times. In our experience the addition of a posterolateral portal does not appear to increase the incidence of nerve injury and aids in the visualisation of all 3 facets

Introduction. Debridement, antibiotics irrigation and implant retention (DAIR) is a common management strategy for hip and knee prosthetic joint infections (PJI). However, failure rates remain high, which has led to the development of predictive tools to help determine success. These tools include KLIC and CRIME80 for acute-postoperative (AP) and acute haematogenous (AH) PJI respectively. We investigated whether these tools were applicable to a Waikato cohort. Method. We performed a retrospective cohort study that evaluated patients who underwent DAIR between January 2010 and June 2020 at Waikato Hospital. Pre-operative KLIC and CRIME80 scores were calculated and compared to success of operation. Failure was defined as: (i) need for further surgery, (ii) need for suppressive antibiotics, (iii) death due to the infection. Logistic regression models were used to calculate the area under the curve (AUC). Results. 117 eligible patients underwent DAIR, 53 in the AP cohort and 64 in the AH cohort. Failure rate at 2 years post-op was 43% in the AP cohort and 59% in the AH cohort. In the AP cohort a KLIC score of <4 had a DAIR failure rate of 28.6%, while those who scored ³4 had a failure rate of 72.2% (p=0.002). In the AH cohort a CRIME80 score of <3 had a DAIR failure rate of 48% while those who scored ³3 had a 100% failure rate (p<0.001). Discussion. This study represents the first external validation of the KLIC and CRIME80 scores for predicting DAIR failure in an Australasian population. The results indicate that both KLIC and CRIME80 scoring tools are valuable aids for the clinician seeking to determine the optimal management strategy in patients with AP or AH PJI

Chauffeur fractures or isolated radial styloid fractures (IRSF) are known to be associated with scapholunate ligament (SL) injuries. Diagnosis without arthroscopic confirmation is difficult in acute fractures. Acute management of this injury with early repair may prevent the need for more complex reconstructive procedures for chronic injuries. We investigated if all IRSF should be assessed arthroscopically for concomitant SL injuries. We performed a prospective cohort study on patients above the age of 16, presenting to the Gold Coast University Hospital with an IRSF, over 2 years. Plain radiographs and computerized tomography (CT) scans were performed. All patients had a diagnostic wrist arthroscopy performed in addition to an internal fixation of the IRSF. Patients were followed up for at least 3 months post operatively. SL repair was performed for all Geissler Grade 3/4 injuries. 10 consecutive patients were included in the study. There was no radiographic evidence of SL injuries in all patients. SL injuries were identified arthroscopically in 60% of patients and one third of these required surgical stabilisation. There were no post operative complications associated with wrist arthroscopy. We found that SL injuries occurred in 60% of IRSF and 20% of patients require surgical stabilisation. This finding is in line with the literature where SL injuries are reported in up to 40-80% of patients. Radiographic investigations were not reliable in predicting possible SL injuries in IRSF. However, no SL injuries were identified in undisplaced IRSF. In addition to identifying SL injuries, arthroscopy also aids in assisting and confirming the reduction of these intra-articular fractures. In conclusion, we should have a high index of suspicion of SL injury in IRSF. Arthroscopic assisted fixation should be considered in all displaced IRSF. This is a safe additional procedure which may prevent missed SL injuries and their potential sequelae

Occlusal loading and muscle forces during mastication aids in assessment of dental restorations and implants and jaw implant design; however, three-dimensional bite forces cannot be measured with conventional transducers, which obstruct the native occlusion. The aim of this study was to combine accurate jaw kinematics measurements, together with subject-specific computational modelling, to estimate subject-specific occlusal loading and muscle forces during mastication. Motion experiments were performed on one male participant (age: 39yrs, weight: 82kg) with healthy dentition. Two low-profile magnetic sensors were fixed to the participant's teeth and the two dental arches digitised using an intra-oral scanner. The participant performed ten continuous of chewing on a polyurethane rubber sample of known material properties, followed by maximal compression (clenching). This was repeated at the molars, premolars of both the left and right sides, and central incisors. Jaw motion was simultaneously recorded from the sensors, and finite element modelling used to estimate bite force. Specifically, simulations of chewing and biting were performed by driving the model using the measured kinematics, and bite force magnitude and direction quantified. Muscle forces were then evaluated using a rigid-body musculoskeletal model of the patient's jaw. The first molars generated the largest bite forces during chewing (left: 309 N, right: 311 N) and maximum-force biting (left: 496 N, right: 495 N). The incisors generated the smallest bite forces during chewing (75 N) and maximum-force biting (114 N). The anterior temporalis and superficial masseter muscles had the largest contribution to maximum bite force, followed by the posterior temporalis and medial pterygoid muscles. This study presents a new method for estimating dynamic occlusal loading and muscle forces during mastication. These techniques provide new knowledge of jaw biomechanics, including muscle and occlusal loading, which will be useful in surgical planning and jaw implant design

Background. The treatment of chronic calcaneal osteomyelitis is a challenging and increasing problem because of the high prevalence of diabetes mellitus and operative fixation of heel fractures. In 1931, Gaenslen reported treatment of hematogenous calcaneal osteomyelitis by surgical excision through a midline, sagittal plantar incision. We have refined this approach to allow successful healing and early mobilization in a modern series of complex patients with hematogenous, diabetic, and postsurgical osteomyelitis. Methods. Twenty-eight patients (mean age 54.6 years, range 20–94) with Cierny-Mader stage IIIB chronic osteomyelitis were treated with sagittal incision and calcaneal osteotomy, excision of infected bone, and wound closure. All patients received antibiotics for at least 6 weeks, and bone defects were filled with an antibiotic carrier in 20 patients. Patients were followed for a mean of 31 months (SD 25.4). Primary outcome measures were recurrence of calcaneal osteomyelitis and below-knee amputation. Secondary outcome measures included 30-day postoperative mortality and complications, duration of postoperative inpatient stay, footwear adaptions, mobility, and use of walking aids. Results. All 28 patients had failed previous medical and surgical treatment. Eighteen patients (64%) had significant comorbidities. The commonest causes of infection were diabetes ± ulceration (11 patients), fracture-related infection (4 patients), pressure ulceration, hematogenous spread, and penetrating soft tissue trauma. The overall recurrence rate of calcaneal osteomyelitis was 18% (5 patients) over the follow-up period, of which 2 patients (7%) required a below-knee amputation. Eighteen patients (64%) had a foot that comfortably fitted into a normal shoe with a custom insole. A further 6 patients (21%) required a custom-made shoe, and only 3 patients required a custom-made boot. Conclusion. Our results show that a repurposed Gaenslen calcanectomy is simple, safe, and effective in treating this difficult condition in a patient group with significant local and systemic comorbidities

Custom acetabular components have become an established method of treating massive acetabular bone defects in hip arthroplasty. Complication rates, however, remain high and migration of the cup is still reported. Ischial screw fixation (IF) has been demonstrated to improve mechanical stability for non-custom, revision arthroplasty cup fixation. We hypothesise that ischial fixation through the flange of a custom acetabular component aids in anti-rotational stability and prevention of cup migration. Electronic patient records were used to identify a consecutive series of 49 custom implants in 46 patients from 2016 to 2022 in a unit specializing in complex joint reconstruction. IF was defined as a minimum of one screw inserted into the ischium passing through a hole in a flange on the custom cup. The mean follow-up time was 30 months. IF was used in 36 cups. There was no IF in 13 cups. No difference was found between groups in age (68.9 vs. 66.3, P = 0.48), BMI (32.3 vs. 28.2, P = 0.11) or number of consecutively implanted cups (3.2 vs. 3.6, P = 0.43). Aseptic loosening with massive bone loss was the primary indication for revision. There existed no difference in Paprosky grade between the groups (P = 0.1). 14.2% of hips underwent revision and 22.4% had at least one dislocation event. No ischial fixation was associated with a higher risk of cup migration (6/13 vs. 2/36, X2 = 11.5, P = 0.0007). Cup migration was associated with an increased risk for all cause revision (4/8 vs. 3/38, X2 = 9.96, P = 0.0016, but not with dislocation (3/8 vs. 8/41, X2 = 1.2, P = 0.26). The results suggest that failure to achieve adequate ischial fixation, with screws passing through the flange of the custom component into the ischium, increases the risk of cup migration, which, in turn, is a risk factor for revision