It is established good practice that joint replacements should have regular follow-up and for the past seven years at the North Hampshire Hospital a local joint register has been used for this purpose and we compare this with results of the Swedish and UK national registries. Since March 1999, all primary and revision knee arthroplasties performed at North Hampshire Hospital, Basingstoke have been prospectively recorded onto a database set up by one of the senior authors (JMB). Data from patients entered in the first six years of the register were analysed. All patients have at least one year clinical and radiological review then a minimum of yearly postal follow-up. As of 31/12/2006, 2854 knee replacement procedures had been performed under the care of 13 consultants. OA was the most common diagnosis in over 75% of knees. 5.2% of patients had died and 4.6% were lost to follow-up. Our revision burden was 3.5% and we had a revision rate of 1.4% for primary total knee replacements. Audit of data for revisions and patello-femoral replacements has enabled us to change our practices. Mean length of stay was 7.2 days for primary total knee arthroplasty versus 4.0 days for unicompartmental knee arthroplasty and 5.4 days for patellofemoral replacement and mean flexion at discharge was 88.4, 93.7 and 88.7 degrees respectively. WOMAC and Oxford scores at 2 years had improved from a mean of 52 and 21 pre-operatively to 74 and 39 respectively for primary total knee arthroplasty. Our costs are estimated at approximately £35 per patient for their lifetime on the register. Compared to other registries:
Our dataset is more complete and comprehensive Our costs are less All patients have a unique identifier (at least 19% of UKNJR data is anonymous) Our audit loops have been closed
Stress shielding (i.e. reduction in bone strains) in the distal ulna is commonly noted following ulnar head replacement arthroplasty. Optimal design parameters for distal ulnar implants, including the length of the stem, are currently unknown. The purpose of this study was to investigate the effect of stem length on bone strains along the length of the ulna. Strain gauges were applied to each of eight cadaveric ulnae to measure bending loads at six locations along each ulna’s length (approximately 1.5, 2.5, 4.0, 6.0, 8.0, and 13.0cm from the ulnar head). The proximal portion of each bone was secured in a custom-designed jig. A materials testing machine applied loads (5–30N) to the ulnar head while native strains were recorded. The ulnar head was removed and the loading procedure repeated for cemented stainless steel stems 3 and 7cm in length, according to a previously reported technique (Austman et al, CORS 2006). Other stem lengths between 3 and 7cm were tested in 0.5cm intervals with a 20N load applied only. Data were analyzed using a two-way repeated measures ANOVA (á=0.05). In general, distal bone strains increased as stem length decreased (e.g. average microstrains at the second distal-most gauges: 138±13 (7cm), 147±15 (6cm), 159±21 (5cm), 186±40 (4cm), 235±43 (3cm)). The native strains were different from all stem lengths for the four distal-most gauges (p<
0.05). No differences were found between any stem length and the native bone at the two proximal-most gauges. The 3cm stem replicated the native strains more closely than the 7cm, over all applied loads (e.g. average microstrains at the third gauge level for a 25N load: 357±59 (native), 396±74 (3cm), 257±34 (7cm)). No stem length tested matched the native strains at all gauge locations. The 3cm stem results were closer to the native strains than the 7cm stem for all loads at gauges overtop of the stem. Overall, the 3cm stem produced the highest strains, and thus would likely result in less distal ulnar bone resorption after implantation. These results suggest that shorter (approximately 3cm) stems should be considered for distal ulnar implants to potentially reduce stress shielding, although this must be balanced by adequate stem length for fixation.
All patients were evaluated prior to surgery. The patients with coexisting inflammatory disease or peri-prosthetic fracture were also evaluated. A hip was diagnosed as infected on the basis of positive intra operative microbiology samples three or more out of five and or histological evidence.
To determine the ten-year survivorship of the Original M E Muller Straight Stem Total Hip Replacement System with emphasis on the longevity of the femoral component in accordance with guidelines published by the National Institute of Clinical Excellence, 266 consecutive hip arthroplasties using the above prosthesis were performed by the senior author between 1983 and 1992. 24 patients were lost to follow-up. Of the remaining 242 patients 80 were male and 162 female. The mean age was 67.49 years. The diagnosis for the majority of patients was osteoarthritis of the hip joint. Pre-operative planning was carried out and the patients were scored using Charnley’s modification of the d’ Aubigne and Postel numerical grading system A mono-bloc stem with a 32-millimeter head used via the trans gluteal approach recommended by Muller. Following discharge serial follow-up consisted of both clinical and radiological evaluation. The data was prospectively stored on a Microsoft access database. The survival of the prosthesis using revision for aseptic loosening as an end-point was calculated by actuarial analysis. 135 patients attended their ten-year follow-up. 97% of patients had good to excellent pain relief and improvement in movement of the joint following surgery. 38% had good to excellent mobility with the remaining having restricted mobility due to associated co-morbid factors. Only in 3% of patients was mobility restricted as a result of the arthroplasty. 7 revisions were carried out for aseptic loosening, all as a result of failure of the acetabular component. The cumulative survival for this hip replacement system was 95.9% and that for the femoral component was 100% at 10 years. The Muller Straight Stem femoral component is based on a press-fit concept and gives predictable long-term results when recommended surgical technique is followed. This series confirms the reliability of the stem design and satisfies the NICE guidelines.
This in-vitro study was conducted to determine the effect of rotator cuff tears on joint kinematics. A shoulder simulator produced unconstrained active abduction of the humerus. Three sequential 1cm lesions were created, the first two in the supraspinatus tendon and the third in the subscapularis tendon. The plane of abduction moved posteriorly and became more abnormal throughout abduction as the size of the tear increased. It is concluded that in order to generate the same motions achieved by the intact joint other muscle groups must be employed, inevitably resulting in altered joint loading. This in-vitro study was conducted to determine the effect of simulated progressive tears of the rotator cuff on active glenohumeral joint kinematics. Five cadaveric shoulders were tested using a shoulder simulator designed to produce unconstrained active motion of the humerus. Forces were applied to simulate loading of the supraspinatus, subscapularis, infraspinatus/teres minor, anterior, middle, and posterior deltoid muscles based upon variable ratios of electromyographic data and average physiological cross-sectional area of the muscles. Three sequential 1cm lesions were created, the first two in the supraspinatus tendon and the third in the subscapularis tendon. Simulated active glenohumeral abduction was performed following the creation of each lesion. Five successive tests were performed to quantify repeatability. The plane of abduction moved posteriorly and became more abnormal throughout abduction as the size of the lesion increased (p=0.01) (Figure 1). In order to generate the same motions achieved with an intact rotator cuff other muscle groups must be employed, inevitably resulting in altered joint loading. A better understanding of the effects that rotator cuff tears have on the kinematics of the glenohumeral joint may result in the development of innovative rehabilitation strategies to compensate for this change in muscle balance and improve the clinical outcomes. Please contact author for diagram and/or graph.
Among two hundred and twenty hemivertebrae in our files we performed over a period of eighteen years sixty nine hemivertebrae (HV) excision. Only H.V. with evidence of curve progression were operated on. The technique was a one stage anterior and posterior approach plus convex anterior and posterior arthrodesis plus convex posterior instrumentation using in the more recents cases a baby C.D. Material: The location of the H.V. was thoraco-lumbar in twenty five cases, lumbar in twenty nine and lumbo-sacral in fifteen. Thirty two free, thirty six hemifused and only one fused H.V. were operated on. The sex ratio was 35 males and 34 females. Associarted malformations were numerous. If the rate of visceral associated malformations is rather the same whatever was the location of the H.V. ( 40% ) the number of associated spine malformations decrease from cranial to caudal ( 60% for thoraco-lumbar H.V. versus 13 % for lumbo-sacral H.V.) The mean age at surgery was 3Y 3M ( 1Y- 9Y) with a mean F.U. of 5Y ( 6M-18Y) for the 25 thoraco-lumbar H.V., respectively 3Y3M ( 1Y- 8Y3M) for the mean age at surgery and 5Y ( 1M-17Y5M) for the average F.U.for the 29 lumbar H.V. and 5Y1M (1M-10Y4M) for surgery and 7Y (1M-18Y3M) for F.U. for the remaining 15 lumbo-sacral H.V. Results: 8 complications were encountered: 4 hardware failures, 1 sepsis, 1 transient paresthesia of the tibial nerve, 1 partial loss of power in the tibialis anterior and 1 valgus deformity following fibular bone grafting. For the 25 thoraco-lumbar H.V. the average scoliosis Cobb angle pre operatively was 38° ( 18°/ 75°) and at F.U. 24° ( 0°/ 76°) . The mean kyphosis Cobb angle was 24° ( -20°/ 54°) pre operatively and 25° (-16°/60°) at F.U. For the 29 lumbar H.V. the mean scoliosis Cobb angle was 35° (16°/58°) pre operatively and 10° (0°/38°) at F.U.The average kyphosis Cobb angle was -2°( -45°/20°) pre operatively and -6° (-42°/22°) at F.U. For the remaining 15 lumbo-sacral H.V. the average scoliosis Cobb angle was 30° (18°/40°) pre operatively and 13° (2°/32°) at F.U. The mean kyphosis Cobb angle was -22°(-54°/0°) pre operatively and -25°(-64°/-8°) at F.U. H.V. excision is in our opinion the best procedure to treat thoraco-lumbar,lumbar and lumbo-sacral H.V. as far as there is evidence of curve progression. The appropriate age to perform this kind of surgery is before three years of age.
We wished to see if Orthopaedic Surgeons are using the current evidence with regard to the use of drains in knee arthroplasty. A questionnaire was faxed to UK members of BASK. We had a 71. 7% response rate (160 responses out of 223). For primary TKR, 89. 5% always use a drain. 42. 1% removed their drains at between 24 and 48 hours. The commonest reason for using drains was to prevent haematoma or haemarthrosis development. The study suggests that the majority of BASK members do not practice evidence based medicine with regard to the use of knee drains.
Primary TKR: Always 136(89.5%); Sometimes 13(8.5%), Never 3(2.0%). Revision TKR: Always 141(94.6%); Sometimes 3 (2.0%); Never 5(3.4%); Not applicable 3. Unicompartmental: Always 66(57.9%); Sometimes 28(24.6%); Never 20(17.5%); Not applicable 3.1. Hours drain removed at: <
24 hours 77(50.7%); 24–48 hours 64(42.1%); >
48 hours 4(2.6%); No answer 7(4.6%). Rationale for drain use: Prevent wound haematoma/haemarthrosis 74; personal reasons 27; to allow retransfusion 20; evidence based 12; despite evidence 5. 29.6% of the responders are currently using cell salvage drains, and a further 7.9% are keen to start using cell salvage drains when the circumstances in their hospitals change to allow them to do so.
The work of Sloof, Ling and Gie has established allografting as a modern technique in revision total hip arthroplasty. The use of allograft enhances the local bone stock and provides a secure fixation for cemented components. Its association with the problem of heterotopic ossification has not been previously considered. The records and x-rays of 114 patients after revision hip surgery were reviewed. All had been operated upon by three Consultant Orthopaedic Surgeons using standard techniques. 35 patients had undergone revision with impaction allografting of both the femur and acetabulum, 29 had allografting of the femur only, 18 of the acetabulum alone and the final 32 patients (acting as controls) had cemented revision arthroplasty without impaction allografting. Fresh frozen allograft was used in all cases and prepared using a bone mill. No patient was given radiation or Indomethacin after their revision surgery, even if they had pre-existing heterotopic ossification. The immediate pre-operative x-rays and x-rays at least a year post-revision were assessed independently by a musculoskeletal radiologist. He was blinded to the type of revision procedure and graded the heterotopic ossification according to the Brooker Classification. Our results report the incidence of heterotopic ossification after revision hip arthroplasty with fresh frozen allograft when compared with cemented revision arthroplasty from our unit and other studies.