Abstract
Aim: To investigate the outcome following revision total hip arthroplasty (THA) using 36 mm and 40 mm modular femoral heads.
Methods: Details were retrieved from our arthroplasty database regarding all revision THAs done in our unit using 36 mm and 40 mm femoral heads. Follow-up information was obtained from patient records and telephone conversation.
Results: The cohort considered totalled 107 revision THAs, 93 using a 36 mm head and 14 using a 40 mm head. All received either highly cross-linked UHMWPE liners or metal on metal liners. The indications for revisions were recurrent instability in eight, periprosthetic fracture in 11, second stage revision in 24, fracture of the femoral stem in one and aseptic loosening in the remaining 63. At a minimum follow up of one year, information was not available for five but they did not have any record of dislocation. Out of the remaining 102 patients, dislocation occurred in 4 hips (3.9%). None of the revisions done with 40 mm head dislocated. In two of the dislocations, the initial indication for revision THA was recurrent instability and if they are excluded, the dislocation rate was 1.96%.
Discussion: Dislocation and the sequalae of recurrent instability remains a significant problem following revision THA and the existing literature varies greatly in the quoted dislocation rates. We believe that the use of 36 mm and 40 mm femoral heads in our unit has been a major factor in low (3.6%) dislocation rate following revision THA. To date there have been no problems encountered resulting from the use of highly cross-linked UHMWPE.
Correspondence should be addressed to Mr John Hodgkinson, BHS, c/o BOA, The Royal College of Surgeons, 35–43 Lincoln’s Inn Fields, London WC2A 3PE.
